[ROOT]  doc  DocFrag  SELECT Assembly, DocFragType, Description.FirstLine()   <  SKIP 1  >   <  TAKE 128  >   

128 items

DocFragIdAssemblyDocFragTypeDescription.FirstLine()
ARCCore.BaseAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.BaseAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.BasePKAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.BasePKAttributeARCCoreClassThe class containing the actual attributes used for -TaggingOfPropertyKeys-.
ARCCore.BaseAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.ClassAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.BasePKAttribute.GetAttributesARCCoreClassMemberNote that illegal to call for other than -PropertyKeyEnum-.
ARCCore.BasePKAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.EnumAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.ClassAttributeARCCoreClassDescribes a class.
ARCCore.ClassAttribute.GetAttributeARCCoreClassMemberThrows exception if type implements -IP- and no corresponding enum found (enum ending with capital letter 'P' (like 'CustomerP' for enum describing class 'Customer' for instance)
ARCCore.EnumAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.ClassAttribute.TryGetAsTypeScriptARCCoreClassMemberGenerates typescript code corresponding to the class which this instance describes.
ARCCore.ClassAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.EnumMemberAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.ClassMemberAttributeARCCoreClassDescribes a member of a class (a method).
ARCCore.ClassMemberAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.IPAttributeARCCoreClassDescribes -IP- classes (describes at class-level)
ARCCore.ClassMemberAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.EnumAttributeARCCoreClassDescribes an enum.
ARCCore.ExtensionsARCCoreClassContains a few general nice to have extensions methods.
ARCCore.EnumAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.EnumAttribute.TryGetAsTypeScriptARCCoreClassMemberGenerates typescript code corresponding to the enum which this instance describes.
ARCCore.Extensions.AddValueARCCoreClassMemberGives better error messages compared to 'original' Add when adding a value to a directory if key already exists
ARCCore.CardinalityExtensionsARCCoreClass 
ARCCore.EnumMemberAttribute.GetAttributeARCCoreClassMemberNote that illegal to call for -PropertyKeyEnum-.
ARCCore.Extensions.ResultARCCoreClassMemberReturns heading plus return-value of function (calls function). If function == null then empty string is returned
ARCCore.CardinalityExtensions.IsMultipleARCCoreClassMemberReturns TRUE if given cardinality implies that multiple items are stored simultaneously in a typical in-memory data storage.
ARCCore.EnumMemberAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.Extensions.ToStringDateAndTimeARCCoreClassMemberUses format 'yyyy-MM-dd HH:mm:ss.fff'.
ARCCore.Extensions.ForEachARCCoreClassMemberUseful when we want to write collection.ForEach( ... ) instead of
ARCCore.Extensions.ToStringVeryShortARCCoreClassMemberReturns same as -ToStringShort- but without any generics information at all.
ARCCore.IKIP.AssertTypeIntegrityARCCoreClassMemberSee -TryAssertTypeIntegrity- for documentation.
ARCCore.Extensions.UseARCCoreClassMemberConvenience method that shortens down code in cases where an instance of an object must be created first in order to use that same variable multiple times
ARCCore.Extensions.ToStringDBARCCoreClassMemberGives the minimum representation of type as string suitable for later reconstruction by -GetType-.
ARCCore.IKIP.TryAssertTypeIntegrityARCCoreClassMemberAsserts that value is of correct type as specified by the key.
ARCCore.Extensions.ToStringWithMSARCCoreClassMemberUses either format 'd\.hh\:mm\:ss\.fff' or 'hh\:mm\:ss\.fff' depending on TotalHours >=24 hours or not.
ARCCore.Extensions.SingleARCCoreClassMemberSame as inbuilt LINQ's Single except that gives a more friendly exception message
ARCCore.IKCoded.FromEncodedARCCoreClassMemberNote how uses instance cache if already exists there.
ARCCore.IKIPARCCoreClassContainer class for key (-IK-), and value (-IP-).
ARCCore.Extensions.SingleOrDefaultARCCoreClassMemberSame as inbuilt LINQ's SingleOrDefault except that gives a more friendly exception message
ARCCore.IKCoded.TryEncodeARCCoreClassMemberReturns a string containing only characters in -AllowedEncodedCharacters-.
ARCCore.IKCoded.EnrichKeyARCCoreClassMember'Implementing' -ITypeDescriber-.
ARCCore.IKARCCoreClassIK = Interface Key / Index key. Key used to lookup 'inside' an instance of -IP-.
ARCCore.IKDate.ValidDateTimeFormatsARCCoreClassMemberNote: Be very careful about expanding this array. ToString must be considered, and also how Equals should work with other sub classes of IK.
ARCCore.IKCoded.TryCheckValidEncodedValueARCCoreClassMemberChecks if encoded value is valid.
ARCCore.IKCodedARCCoreClassUnderstands coded and unencoded variants of -IK-.
ARCCore.IKLongARCCoreClassA more memory efficient alternative to -IKString-.
ARCCore.IKCoded.AllowedEncodedCharactersARCCoreClassMemberThe character set 'A...Za...z0...9-_().,='.
ARCCore.IKCoded.ToStringARCCoreClassMemberReturns -Encoded-'s string representation.
ARCCore.IKString.EnrichKeyARCCoreClassMember'Implementing' -ITypeDescriber-.
ARCCore.IKDateARCCoreClassA more memory efficient alternative to -IKString- (together with -IKLong-).
ARCCore.IKCoded.EncodedARCCoreClassMemberThis string value can be used directly in folder names, file names and HTTP URL's without any further encoding being necessary.
ARCCore.IKTypeARCCoreClassIndex key used when storing a collection of a given type, like 'Customer'.
ARCCore.IKLong.op_EqualityARCCoreClassMemberIt is quite natural in the code to write code like "if (a.CustomerId == b.CustomerId)", therefore the need to implement == and != operators here.
ARCCore.IKStringARCCoreClassIndex key for any general id, like primary-key or sequence-number or similar.
ARCCore.PKARCCoreClassPK = AgoRapide PropertyKey.
ARCCore.IKLong.EnrichKeyARCCoreClassMember'Implementing' -ITypeDescriber-.
ARCCore.IKString.FromCacheARCCoreClassMemberReduces number of objects generated by caching those known to be within a limited range
ARCCore.PK.TryGetEnumARCCoreClassMemberNote that usually you will not have to ask for this value, usually in AgoRapide it goes the other way around, you have the enum member / enum value and want the corresponding property key.
ARCCore.IKType.ToStringARCCoreClassMemberCaching is supposed to be useful because may be called quite often.
ARCCore.ITypeDescriber.GetSyntaxHelpARCCoreClassMemberEnables explanation of syntax in different contexts from one source:
ARCCore.PK.TryCleanValidateAndParseARCCoreClassMemberCleans and parses the value according to specifications for this property key.
ARCCore.ITypeDescriberARCCoreClassProvides a standardized mechanism for describing single-property values (like 'PhoneNumber' of 'Customer' for instance).
ARCCore.ParseResultARCCoreClassNOTE: Concept is very old, from the dark ages of AgoRapide's very first inception. There might be room for improvement.
ARCCore.PK.PackParseResultForStorageInEntityObjectARCCoreClassMemberPacks result of parsing into a -IP--derived class, suitable for sending to -AddOrUpdateP-.
ARCCore.PK.TryGetAARCCoreClassMemberConvenience method for easy access to -BasePKAttribute-.
ARCCore.PK.ToStringARCCoreClassMemberCaching is supposed to be useful because may be called quite often.
ARCCore.PK.EqualsARCCoreClassMemberNote that ToString is only based on __enum, meaning that two enum members / enum values with same name but different type, like CustomerP.Name and OrderP.Name, will be considered equal.
ARCCore.PK.ModifyCleanerAndValidatorAndParserForCardinalityARCCoreClassMemberCalled from -Initialize- after _cleaner and _validatorAndParser have been set.
ARCCore.PK.TryValidateAndParseARCCoreClassMemberParses the value according to specifications for this property key.
ARCCore.PK.TryGetPARCCoreClassMemberMade virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway.
ARCCore.PK.TryGetFromTypeAndFieldName Overload3ARCCoreClassMemberReturns property key based on type and field name.
ARCCore.PK.GetAllPKForEntityTypeStringARCCoreClassMemberReturns all property keys relevant for the given entity type,
ARCCore.PK.CardinalityARCCoreClassMemberReturns cardinality from -PKTypeAttribute-'s -Cardinality-.
ARCCore.PK.TryGetFromTypeAndFieldName Overload2ARCCoreClassMemberReturns property key based on type and field name.
ARCCore.PK.BuildFromStringCacheARCCoreClassMemberBuilds the content of -_fromStringCache- and also -_allPKForEntityTypeCache-.
ARCCore.PK.CorrespondingClassARCCoreClassMemberReturns -CorrespondingClass- based on -__enum-.
ARCCore.PK.TryGetFromTypeAndFieldName Overload1ARCCoreClassMemberReturns property key based on type and field name.
ARCCore.PK.GetTypeMappingARCCoreClassMemberReturns the relevant property key for a given type entity-type and field-type.
ARCCore.PK.ValidatorAndParserARCCoreClassMemberValidates and parses a value.
ARCCore.PK.GetAllPKForEntityTypeARCCoreClassMemberReturns all property keys relevant for the given entity type,
ARCCore.PK.GetObligatoryValuesForEntityTypeARCCoreClassMemberReturns all obligatory values (based on -IsObligatory-)
ARCCore.PK.CleanerARCCoreClassMemberCleanup of values, to be used before value is attempted validated.
ARCCore.PKHTMLAttribute.EncodeARCCoreClassMemberEncodes the given string to HTML format through the static method implemented in class -Encoder-.
ARCCore.PKHTMLAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.PKLogAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.PKHTMLAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.IHTMLEncoderARCCoreClassPseudo-interface signifying that implementing class has a static metod called 'Encode' for encoding a string to HTML.
ARCCore.PKLogAttribute.DoNotLogAtAllARCCoreClassMemberSee -DoNotLogAtAll-.
ARCCore.PKHTMLAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.PKLogAttributeARCCoreClassExplains how logging of changes to a property should be done.
ARCCore.PKLogAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.PKHTMLAttribute.EncoderARCCoreClassMemberSee -Encoder-.
ARCCore.PKLogAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.PKRelAttributeARCCoreClassDescribes relationships between entities (between tables in RDBMS terms).
ARCCore.PKRelAttribute.EnforceReferentialIntegrityARCCoreClassMemberSee -EnforceReferentialIntegrity-.
ARCCore.PKTypeAttribute.StandardValidatorAndParserARCCoreClassMemberReturns validator and parser for well known types like string, int, long, bool, DateTime, TimeSpan, Type, Uri.
ARCCore.PKTypeAttribute.CardinalityARCCoreClassMemberSee -Cardinality-.
ARCCore.PKRelAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.PKTypeAttribute.StandardCleanerARCCoreClassMemberReturns a cleaner for well known types like bool
ARCCore.PKTypeAttribute.DefaultValueARCCoreClassMemberSee -DefaultValue-.
ARCCore.PKTypeAttributeARCCoreClassContains the most basic essential information about a property key, like its description, -Type-, -Cardinality-, -IsObligatory- and -DefaultValue-.
ARCCore.PKTypeAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.PKTypeAttribute.IsObligatoryARCCoreClassMemberSee -IsObligatory-.
ARCCore.PKTypeAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.PKTypeAttribute.TypeARCCoreClassMemberSee -Type-.
ARCCore.PKTypeAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.IPARCCoreClassIP = IProperty.
ARCCore.IP.TrySetPPARCCoreClassMemberSetPP = set property of property. Sets property of entity contained within this class.
ARCCore.IP.LogARCCoreClassMemberThe 'final' overload of -Log- that is called by the other overloads.
ARCCore.IP.TryGetV Overload2ARCCoreClassMemberThe actual value of the property. Mostly relevant for single-value properties like -PValue-.
ARCCore.IP.GetKeysEqualToValueARCCoreClassMemberReturns properties which themselves again have key and value equal to the given key and value.
ARCCore.IP.LogExecuteTimeARCCoreClassMemberTimes the execution of the given function and logs details about elapsed time.
ARCCore.IP.IncARCCoreClassMemberIncrements given property key by 1. Sets to 1 if not found. Uses long, not integer.
ARCCore.IP.OnTrySetPARCCoreClassMemberEvent handler to be called by -TrySetP- before it changes a property value (but AFTER it has done any validity checks, that is, after it has 'decided' to return TRUE, in other words, event handler should be called when change is guaranteed to go through, but before it actually has been done).
ARCCore.IP.HandleExceptionARCCoreClassMemberNote that most relevant to use for -PConcurrent-.
ARCCore.IP.DecARCCoreClassMemberDecrements given property key by 1. Sets to -1 if not found. Uses long, not integer.
ARCCore.IP.TryGetPARCCoreClassMemberGets a single property for this object
ARCCore.IP.TryParseDtrARCCoreClassMemberParses a PropertyStreamLine- beginning with -dtr-.
ARCCore.IP.TryGetPVARCCoreClassMemberGets a single property's value for the given property key.
ARCCore.IP.AddPARCCoreClassMemberAdds a property for this object.
ARCCore.IP.ToPropertyStreamARCCoreClassMemberTurns object into a -PropertyStream-
ARCCore.IP.IsValidARCCoreClassMemberNote that by default all properties are 'valid' but because of -NoRealDeletion-, we must have a mechanism for invalidating properties. This property returns FALSE if property has been invalidated and timestamp for invalidation is not '0001-01-01'.
ARCCore.IP.AddOrUpdatePARCCoreClassMemberDuplicates functionality of SetP.
ARCCore.IP.ToJSONSerializeableARCCoreClassMemberPrepares the data into a format acceptable for System.Text.Json.JsonSerializer.Serialize.
ARCCore.IP.ItemARCCoreClassMemberOffers string-based direct indexing.
ARCCore.IP.GetOrAddPVARCCoreClassMemberGets value. If not set then value will be added

Generated 2026-06-28 13:18:06.414 UTC