[ROOT] doc DocFrag SELECT Assembly, DocFragType, Description.FirstLine() < SKIP 146 > < TAKE 240 >
240 items
| DocFragId | Assembly | DocFragType | Description.FirstLine() |
|---|---|---|---|
| ARCCore.IP.HandleException | ARCCore | ClassMember | Note that most relevant to use for -PConcurrent-. |
| ARCCore.IP.ToString | ARCCore | ClassMember | The ToString()-implementation in the classes implementing this interface is supposed to give a short concise representation of the object for debugging and logging purposes, that is, intended for human consumption. The most 'important' implementation is probably the one in -PRich- (-ToString-) because that one is often the basis for your entity classes like 'Customer', 'Order' and so on |
| ARCCore.IP.TryParseDtr | ARCCore | ClassMember | Parses a PropertyStreamLine- beginning with -dtr-. |
| ARCCore.IP.TrySetPP | ARCCore | ClassMember | SetPP = set property of property. Sets property of entity contained within this class. |
| ARCCore.IP.Initialize | ARCCore | ClassMember | Note that has a default implementation (doing nothing). |
| ARCCore.IP.GetKeysEqualToValue | ARCCore | ClassMember | Returns properties which themselves again have key and value equal to the given key and value. |
| ARCCore.IP.AssertIntegrity | ARCCore | ClassMember | See -TryAssertIntegrity-. |
| ARCCore.IP.GetOrAddPV | ARCCore | ClassMember | Gets value. If not set then value will be added |
| ARCCore.IP.AddPV Overload2 | ARCCore | ClassMember | NOTE: The different AddPV / AddP overloads should only be used if you want an assertion against the |
| ARCCore.IP.GetPV | ARCCore | ClassMember | Gets a single property's value for this object. Returns default value if not successful. |
| ARCCore.IP.AddPV Overload1 | ARCCore | ClassMember | Adds a property value (as a -PValue-) for this objectThrows -KeyAlreadyExistsException- when relevant. |
| ARCCore.IP.TryGetPV | ARCCore | ClassMember | Gets a single property's value for the given property key. |
| ARCCore.IP.AddP | ARCCore | ClassMember | Adds a property for this object. |
| ARCCore.IP.IsValid | ARCCore | ClassMember | Note that by default all properties are 'valid' but because of -NoRealDeletion-, we must have a mechanism for invalidating properties. This property returns FALSE if property has been invalidated and timestamp for invalidation is not '0001-01-01'. |
| ARCCore.IP.AddOrUpdateP | ARCCore | ClassMember | Duplicates functionality of SetP. |
| ARCCore.PCollection.TrySetPP | ARCCore | ClassMember | Replaces default interface method -TrySetPP-. |
| ARCCore.IP.Values | ARCCore | ClassMember | Returns all the values (all the properties) for this instance. |
| ARCCore.PCollection.GetKeysEqualToValue | ARCCore | ClassMember | Returns properties which themselves again have key and value equal to the given key and value. |
| ARCCore.IP.Logger | ARCCore | ClassMember | Describes a logger. |
| ARCCore.PCollection.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCCore.IP.AllIPDerivedTypes | ARCCore | ClassMember | All relevant -IP--derived types for the whole application. |
| ARCCore.PCollection.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.IP.AllIPDerivedTypesWithPKEnum | ARCCore | ClassMember | All relevant -IP--derived types for the whole application for which the also is defined a -PropertyKeyEnum-. |
| ARCCore.PExact<TEnumType>..ctor | ARCCore | ClassMember | Set capacity to the number of members in the -PropertyKeyEnum- for this class (minus the __invalid-value) |
| ARCCore.PConcurrent.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.PExact<TEnumType>.Storage | ARCCore | ClassMember | Uses int-value of -__enum- minus 1 as index. |
| ARCCore.PExact<TEnumType> | ARCCore | Class | Very -MemoryConsumption- efficient alternative to -PRich-. |
| ARCCore.PII | ARCCore | Class | PII = property for storing individual items. |
| ARCCore.PExact<TEnumType>.SetPVDirect | ARCCore | ClassMember | High performance alternative to -TrySetP-, accessing -Storage- more direct. |
| ARCCore.PII.TryGetV | ARCCore | ClassMember | Since value is stored in keys, we need to override this method. |
| ARCCore.PExact<TEnumType>.GetPVDirect | ARCCore | ClassMember | High performance alternative to -TryGetP-, accessing -Storage- more direct. |
| ARCCore.PValueEmpty | ARCCore | Class | Represents the 'no value'. |
| ARCCore.PII.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCCore.PValueEmpty.TrySetP | ARCCore | ClassMember | NOTE: -TryStore- is explicit aware that -PValue- and -PValueEmpty- |
| ARCCore.PII.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.PValueEmpty.ToPropertyStream | ARCCore | ClassMember | Typicall return value could be something like |
| ARCCore.IPII | ARCCore | Class | Future expansion, using different classes for storing, not only -PII-. |
| ARCCore.ActualConnection | ARCCore | Class | The actual connection, its internal state, queue for sending and so on. |
| ARCCore.IIKII | ARCCore | Class | Related to -PII-, property for storing individual items |
| ARCCore.ActualConnection.SetMyUpdatePositionGenerator | ARCCore | ClassMember | Set by -StreamProcessor-. |
| ARCCore.IIKII.PackParseResultForStorageInIKII | ARCCore | ClassMember | This method corresponds to -PackParseResultForStorageInEntityObject-. |
| ARCCore.ActualConnection.SetSinglePropertyStreamReceiver | ARCCore | ClassMember | Set by -StreamProcessor-. |
| ARCCore.IIKII.PackObjectForStorageInIKII | ARCCore | ClassMember | This method corresponds to -PackObjectForStorageInEntityObject-. |
| ARCCore.ActualConnection.SetUpToDatePositionGenerator | ARCCore | ClassMember | Set by -StreamProcessor-. Not used by -Client-. |
| ARCCore.PReadOnly | ARCCore | Class | Experimental (from Feb 2022) class suitable for classes that do not need to be deserialized, or to accept write requests through -PropertyAccess-. |
| ARCCore.ActualConnection.InitializeOutgoingConnection | ARCCore | ClassMember | Relevant for -Outgoing-. |
| ARCCore.PRich | ARCCore | Class | Fully flexible storage. Can store anything. Typical inherited for entity representations like 'Customer' or 'Order'. |
| ARCCore.IP.OnTrySetP | ARCCore | ClassMember | Event handler to be called by -TrySetP- before it changes a property value (but AFTER it has done any validity checks, that is, after it has 'decided' to return TRUE, in other words, event handler should be called when change is guaranteed to go through, but before it actually has been done). |
| ARCCore.BaseAttribute | ARCCore | Class | Instances of this class are used as source of documentation and data for the API. |
| ARCCore.IP.TryGetP | ARCCore | ClassMember | Gets a single property for this object |
| ARCCore.BasePKAttribute.GetAttributes | ARCCore | ClassMember | Note that illegal to call for other than -PropertyKeyEnum-. |
| ARCCore.IP.ToPropertyStream | ARCCore | ClassMember | Turns object into a -PropertyStream- |
| ARCCore.IP.Item | ARCCore | ClassMember | Offers string-based direct indexing. |
| ARCCore.IP.ToJSONSerializeable | ARCCore | ClassMember | Prepares the data into a format acceptable for System.Text.Json.JsonSerializer.Serialize. |
| ARCCore.IP.Keys | ARCCore | ClassMember | Returns all the keys for this instance. |
| ARCCore.IP.GetValueForJSONSerializer | ARCCore | ClassMember | Practical approach to serializing of -IP- based values to JSON. |
| ARCCore.IP.AllIPDerivedTypesWithPKEnumApplicationSpecific | ARCCore | ClassMember | All relevant -IP--derived types for the -ApplicationSpecificCode- part of the application for which also is defined a -PropertyKeyEnum-. |
| ARCCore.IP.TrySetP | ARCCore | ClassMember | Set property regardless of whether exists or not. |
| ARCCore.ICreated | ARCCore | Class | A dummy interface signifying that implementing class has the ability to store (in-memory) metadata -Created- |
| ARCCore.IP.TryGetV Overload1 | ARCCore | ClassMember | The actual 'unpacking' of the object. |
| ARCCore.PCollection | ARCCore | Class | A class useful for storing a collection of entities (a table in RDBMS-terms) because it implements -Indexing-. |
| ARCCore.IP.DeepCopy | ARCCore | ClassMember | Creates a deep copy of this object instance, that is, a copy with all new object instances (except for immutable objects). |
| ARCCore.PCollection.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.IP.AllIPDerivedEntityCollectionClassesDict | ARCCore | ClassMember | All -IP--derived types for which is found a corresponding class with name like '{EntityType}Collection' |
| ARCCore.IGetKeysEqualToValue | ARCCore | Class | Interface stating that implementing class does not use the default implementation of -GetKeysEqualToValue- (which does not use -Indexing-) but has replaced it with a more efficient implementation assumed to utilize -Indexing-. |
| ARCCore.IP.AllIPDerivedTypesInludingGenericAndAbstract | ARCCore | ClassMember | All relevant -IP--derived types (except the interface -IP- itself) known to the application. |
| ARCCore.PConcurrent | ARCCore | Class | A (somewhat) thread-safe alternative to -PRich- which also supports -ExposingApplicationState- (through -Logger-). |
| ARCCore.IP.AllIPDerivedTypesDict | ARCCore | ClassMember | Provides lookup of a type in -AllIPDerivedTypes- given its string representation. |
| ARCCore.PExact<TEnumType>.TryGetPVDirect | ARCCore | ClassMember | High performance alternative to -TryGetP-, accessing -Storage- more direct. |
| ARCCore.IP.AllIPDerivedTypesDictIKType | ARCCore | ClassMember | Same as -AllIPDerivedTypesDict- except that value is -IKType-, not string. |
| ARCCore.PExact<TEnumType>.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.P | ARCCore | Class | 'Dummy'-class, not necessarily in use. See -PP- for more information. Created because of the concept of CorrespondingClass which is strictly enforced |
| ARCCore.PValue<T>.DeepCopy | ARCCore | ClassMember | Note that if the generic type (T) is not immutable, then what we return will not be a truly deep copy. |
| ARCCore.P.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCCore.PValue<T>..ctor | ARCCore | ClassMember | Note how this class does not have a parameter-less constructor (unlike all other -IP--derived classes in AgoRapide) |
| ARCCore.P.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.ActualConnection.Communicate | ARCCore | ClassMember | Common for both -Incoming- and -Outgoing-. |
| ARCCore.P.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.ActualConnection.LogAndSendErrorConditionData | ARCCore | ClassMember | Called when a serious error condition has been discovered and connection should be terminated. |
| ARCCore.PRich.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCCore.ActualConnection.Send | ARCCore | ClassMember | Sends all messages in queue. |
| ARCCore.PRich.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.ActualConnection.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.PRich.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.ActualConnection..ctor | ARCCore | ClassMember | Note parameter-less constructor as desired for all classes inheriting -IP-. |
| ARCCore.PValue<T> | ARCCore | Class | Single value storage. |
| ARCCore.MonkeyWrench | ARCCore | Class | Describes level of 'spanner-throwing' this connection shall contibute with |
| ARCCore.PValue<T>.TrySetP | ARCCore | ClassMember | NOTE: -TryStore- is explicit aware that -PValue- and -PValueEmpty- |
| ARCCore.ClientUpdatePosition | ARCCore | Class | Describes from WHERE (from WHEN) in the historic -PropertyStream- new data is to be returned. |
| ARCCore.PValue<T>.TryGetV | ARCCore | ClassMember | Supports duck typing. |
| ARCCore.ClientUpdatePosition.Filename | ARCCore | ClassMember | Filename like '2020-04-03 08:42:22_R001' |
| ARCCore.PValue<T>.ConvertObjectToString | ARCCore | ClassMember | Converts object to string. |
| ARCCore.PropertyStreamLine.StoreFailure | ARCCore | ClassMember | Stores a 'ParseOrStoreFailure'-object. |
| ARCCore.PValue<T>.ToString | ARCCore | ClassMember | Do no cache this value, because memory consumption would then increase significantly in your applicationj |
| ARCCore.PropertyStreamLine.TryStore | ARCCore | ClassMember | Stores the given -PropertyStreamLineParsed- in the given storage object. |
| ARCCore.ClientUpdatePosition.Index | ARCCore | ClassMember | Index (zero-based) into file. Value of -1 means blank update status / no data received at all (or no data received for this specific filename) |
| ARCCore.PropertyStreamLine.AllowedKeyChars | ARCCore | ClassMember | Allowed characters in the Key-part of a -PropertyStreamLine-. |
| ARCCore.ClientUpdatePosition.ClientDatastoreIsEmpty | ARCCore | ClassMember | Used by the subscribing client to signify that it has no data stored locally, and it therefore needs an update from the beginning of the -PropertyStream-, that is, 'from the beginning of time'. |
| ARCCore.PropertyStreamLine.AllowedValueChars | ARCCore | ClassMember | Allowed characters in the Value-part of a -PropertyStreamLine-. |
| ARCCore.ClientUpdatePosition.OnlyNewDataIsRequested | ARCCore | ClassMember | Used by the subscribing client to signify that it does not care about historical data, the server may start with sending only new data. |
| ARCCore.PropertyStreamLineParsed | ARCCore | Class | Parses the keys part of a line from -PropertyStream-, like 'Customer/42/FirstName = John. |
| ARCCore.ClientUpdatePosition.IsGoBack | ARCCore | ClassMember | Has to be translated by -StreamProcessor- into a concrete filename / index. |
| ARCCore.PropertyStreamLineParsed.ToString | ARCCore | ClassMember | Note relatively complex operation of 'restoring' original property stream line. |
| ARCCore.ClientUpdatePosition.IsAtEndOfStream | ARCCore | ClassMember | Necessary in order to implement -AdHocQuery-. |
| ARCCore.PropertyStreamLineParsed.TryParse | ARCCore | ClassMember | Generate list of <(IK key, Type valueType)> together with value from value part. |
| ARCCore.ClientUpdatePosition.ClientDatastoreIsEmptyInstance | ARCCore | ClassMember | See also -ClientDatastoreIsEmpty. |
| ARCCore.PropertyStreamLineParsed.IsComment | ARCCore | ClassMember | Signifies that property stream line given for parsing started with '//' (two forward slashes). |
| ARCCore.ClientUpdatePosition.OnlyNewDataIsRequestedInstance | ARCCore | ClassMember | See also -OnlyNewDataIsRequested. |
| ARCCore.PropertyStreamLineParsed.Keys | ARCCore | ClassMember | The keys part of the -PropertyStreamLine-, that is, everything before ' = '. |
| ARCCore.ConnectionInstruction | ARCCore | Class | The instruction about what connections to make (host, portnr, data transfer direction and so on). |
| ARCCore.PropertyStreamLineParsed.Value | ARCCore | ClassMember | The original (non-parsed, non-validated)) value part of the -PropertyStreamLine-, that is, everything after ' = '. |
| ARCCore.StreamProcessor.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.StorageFile.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCCore.StreamProcessor.OutsideLocalReceiver | ARCCore | ClassMember | The outside (in the sense outside of this class) local mechanism which receives all -PropertyStreamLine- registered by this class. |
| ARCCore.StorageFile.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.PropertyStreamLineWithOrigin | ARCCore | Class | The rationale for this class is that -ReceiveAndDistribute- needs to distingush origin of data when routing it (in general, in order to avoid sending it back to its source). |
| ARCCore.StorageFile.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.PropertyStreamLineWithOrigin.HasLocalOrigin | ARCCore | ClassMember | Locally generated data is not to be sent to -OutsideLocalReceiver-). We instead leave it to the 'outside' to decide if |
| ARCCore.Subscription | ARCCore | Class | A stream -Subscription- is the concept of how nodes (see -ARNodeType-) subscribe to the -PropertyStream- (either the whole stream or just part of it) in a distributed manner. |
| ARCCore.PropertyStreamLineWithOrigin.SendToLocalReceiver | ARCCore | ClassMember | Means 'send to local receiver regardless of origin'. |
| ARCCore.Subscription.FromTime | ARCCore | ClassMember | TODO: Implement concept of specifying starting-point in TIME (often for an -AdHocQuery-?). |
| ARCCore.PropertyStreamLineWithOrigin.DoNotAddTimestamp | ARCCore | ClassMember | Normally -StreamProcessor- inserts the required -Timestamp-s in the AgoRapide storage. |
| ARCCore.Subscription.ToTime | ARCCore | ClassMember | TODO: Implement concept of specifying ending-point in TIME (often for an -AdHocQuery-?). |
| ARCCore.PropertyStreamLineWithOrigin.ReceivedFromOutgoing | ARCCore | ClassMember | Data received from an outgoing connection, that is, data received based on 'this' application's subscription request (as subscribing client). |
| ARCCore.Subscription.IsMatch Overload1 | ARCCore | ClassMember | Evaluates a query consisting of multiple instances of -Subscription- against a single property stream line. |
| ARCCore.StorageFile | ARCCore | Class | Implemented only in order to store some ideas about -Hash-. |
| ARCCore.Subscription.IsMatch Overload2 | ARCCore | ClassMember | Evaluates this instance of -Subscription- against a single property stream line (which has been split up into its constituent elements). |
| ARCCore.UtilCore.TimeSpanTryParse | ARCCore | ClassMember | Accepts on of the formats specified in -ValidDateTimeFormats-. |
| ARCCore.Subscription.SyntaxHelp | ARCCore | ClassMember | '+*' Subscribe to everything in database. |
| ARCCore.UtilCore.UseLocalTimeInsteadOfUTC | ARCCore | ClassMember | By default AgoRapide operates only with UTC time. |
| ARCCore.Subscription.IsAdd | ARCCore | ClassMember | Corresponds to whether value starts with a plus sign, '+' or not. |
| ARCCore.UtilCore.DateTimeNow | ARCCore | ClassMember | Returns DateTime.UtcNow unless -UseLocalTimeInsteadOfUTC- has been set to TRUE in which case DateTime.Now is returned. |
| ARCCore.Subscription.IsRemove | ARCCore | ClassMember | Corresponds to whether value starts with a minus sign, '+' or not. |
| ARCCore.UtilCore.CurrentlyStartingUp | ARCCore | ClassMember | Called once at application startup after all Attribute instances in the C# code has been processed. |
| ARCCore.UtilCore | ARCCore | Class | Utility methods for -ARCCore-. |
| ARCCore.UtilCore.Assemblies | ARCCore | ClassMember | All relevant assemblies for application. |
| ARCCore.UtilCore.ValidDateTimeFormats | ARCCore | ClassMember | 'yyyy-MM-dd HH:mm:ss.fff', 'yyyy-MM-dd HH:mm:ss', 'yyyy-MM-dd HH:mm', 'yyyy-MM-dd' |
| ARCCore.UtilCore.Culture | ARCCore | ClassMember | The general culture used for parsing. |
| ARCCore.UtilCore.ValidTimeSpanFormats | ARCCore | ClassMember | 'hh\:mm', 'hh\:mm\:ss', 'd\.hh\:mm\:ss', 'hh\:mm\:ss\.fff' // Milliseconds,'d\.hh\:mm\:ss\.fff' |
| ARCCore.UtilCore.Culture_en_US | ARCCore | ClassMember | Used by -DoubleTryParse-. |
| ARCCore.REx | ARCCore | Class | REx = 'TooDeepRecursiveDepthException' |
| ARCCore.UtilCore.DefaultAgoRapideEncoding | ARCCore | ClassMember | The standard encoding used for text (UTF8). |
| ARCCore.REx.Inc | ARCCore | ClassMember | Increases recursive count. |
| ARCCore.ClassAttributeP.ClassType | ARCCore | EnumMember | The actual type that we are a -ClassAttribute- for |
| ARCCore.REx.Dec | ARCCore | ClassMember | This method should be called from inside a 'finally' block, in order to secure its execution, if not then your static recursion depth counter could slowly increase over time due to exceptions ocurring after call to -Inc- but before call to -Dec-. |
| ARCCore.ClassAttributeP.BaseTypes | ARCCore | EnumMember | The inheritance hierarchy for this class, starting with base type (excluding 'object').r Not set if class does not inherit any class except 'object' |
| ARCCore.InvalidTypeException | ARCCore | Class | |
| ARCCore.ClassAttributeP.SubTypes | ARCCore | EnumMember | Direct and indirect sub types of this class. |
| ARCCore.InvalidTypeException.AssertAssignable | ARCCore | ClassMember | Asserts that expectedType.IsAssignableFrom(foundType) |
| ARCCore.ClassAttributeP.Interfaces | ARCCore | EnumMember | All interfaces that this class and its base classes implement |
| ARCCore.InvalidTypeException.AssertEquals | ARCCore | ClassMember | Asserts that expectedType.Equals(foundType) |
| ARCCore.ClassAttributeP.InterfacesDirectlyImplemented | ARCCore | EnumMember | All interfaces that this class directly implements. |
| ARCCore.TValue | ARCCore | Class | Placeholder for any class type suitable as generic type parameter -PValue-. |
| ARCCore.ClassAttributeP.CorrespondingEnumType | ARCCore | EnumMember | Only relevant when implements -IP-. |
| ARCCore.TIP | ARCCore | Class | Placeholder for any class type suitable as generic type parameter restricted to -IP. |
| ARCCore.ClassAttributeP.BoilerplateCodePropertiesAndStorage | ARCCore | EnumMember | Only relevant when implements -IP- and when a -CorrespondingEnumType- is found. |
| ARCCore.TIP.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCCore.ClassMemberAttributeP | ARCCore | Enum | Describes class -ClassMemberAttribute-. |
| ARCCore.TIP.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.EnumAttributeP.CorrespondingClass | ARCCore | EnumMember | Only relevant when -PropertyKeyEnum-. |
| ARCCore.StreamProcessor+StorageFile.Length | ARCCore | ClassMember | Wrongly placed. Belongs to each individual revision file. |
| ARCCore.EnumMemberAttributeP | ARCCore | Enum | Describes class -EnumMemberAttribute-. |
| ARCCore.StreamProcessor+StorageFile.Properties | ARCCore | ClassMember | Key = revision number of file (due to compression / -DataRetention-), like R00001, R00002 and so on. |
| ARCCore.EnumMemberAttributeP.EnumType | ARCCore | EnumMember | The type of the enum (like type of 'CustomerP' in CustomerP.FirstName) that we are an attribute for |
| ARCCore.BaseAttributeP | ARCCore | Enum | Describes class -BaseAttribute-. |
| ARCCore.EnumMemberAttributeP.EnumMember | ARCCore | EnumMember | The actual enum member / enum value (like 'Firstname' in CustomerP.FirstName) that we are an attribute for |
| ARCCore.BaseAttributeP.Description | ARCCore | EnumMember | The description for the attribute, like this description |
| ARCCore.ARComponents | ARCCore | Enum | ARComponents = AgoRapide Components. Contains short descriptions of the different 'official' AgoRapide components. |
| ARCCore.BaseAttributeP.LongDescription | ARCCore | EnumMember | The long (detailed) description for the attribute. |
| ARCCore.ARComponents.ARCCore | ARCCore | EnumMember | A necessary library (.DLL in Windows terms) that every -ARNodeType- should link to. |
| ARCCore.ClassAttributeP | ARCCore | Enum | Describes class -ClassAttribute-. |
| ARCCore.ARComponents.ARADB | ARCCore | EnumMember | An application constituting the full functionality of a -CoreDB- (linking to -ARCCore-). |
| ARCCore.ClassAttributeP.AssemblyName | ARCCore | EnumMember | The assembly in which this class resides. |
| ARCCore.ARComponents.ARAClient | ARCCore | EnumMember | A template application for a -Client- (linking to -ARCCore-). |
| ARCCore.ClassAttributeP.ClassNamespace | ARCCore | EnumMember | The namespace for -ClassType-. |
| ARCCore.PropertyStreamLine.EncodeKeyPart | ARCCore | ClassMember | Converts a single key part of a -PropertyStreamLine- to a format suitable for sending over a -PropertyStream-. |
| ARCCore.PropertyStreamLine.EncodeValuePart | ARCCore | ClassMember | Converts a single value part of a -PropertyStreamLine- to a format suitable for sending over a -PropertyStream-. |
| ARCCore.PropertyStreamLine.Decode | ARCCore | ClassMember | Decodes string as encoded by -EncodeKeyPart- or -EncodeValuePart-. |
| ARCCore.PropertyStreamLine.TryParseDirectToIP | ARCCore | ClassMember | Parses a series of -PropertyStreamLine- directly to the given type of -IP-. |
| ARCCore.PropertyStreamLine.TryParseDirectToProperty | ARCCore | ClassMember | Parses direct to a given property value. |
| ARCCore.PropertyStreamLine.ParseAndStore | ARCCore | ClassMember | Note that throws exception if -TryParseAndStore- fails. |
| ARCCore.PropertyStreamLine.ParseAndStoreFailSafe | ARCCore | ClassMember | If either parsing or storing fails then this method will call -StoreFailure- in order to keep some track of why parsing or storing failed. |
| ARCCore.PropertyStreamLine.StoreFailSafe | ARCCore | ClassMember | Stores if possible and fails silently. |
| ARCCore.StreamProcessor | ARCCore | Class | Implements the storage mechanism for AgoRapide. |
| ARCCore.StreamProcessor.CreateBareBonesInstance | ARCCore | ClassMember | Creates a bare-bones -StreamProcessor- instance. |
| ARCCore.StreamProcessor.Initialize | ARCCore | ClassMember | Initializes this instance of -StreamProcessor- |
| ARCCore.StreamProcessor.AddOrRemoveOutgoingConnections | ARCCore | ClassMember | Not relevant for -CoreDB-. |
| ARCCore.StreamProcessor.StartTCPIPCommunication | ARCCore | ClassMember | Starts communicating over TCP/IP. |
| ARCCore.StreamProcessor.ReceiveAndDistribute | ARCCore | ClassMember | Process all messages in receive queue. |
| ARCCore.StreamProcessor.AddTimestampAsRequired | ARCCore | ClassMember | Adds -Timestamp- to the property stream (to -_queueReceive-) as specified by -TimestampResolution-. |
| ARCCore.StreamProcessor.ReadStorageFile | ARCCore | ClassMember | Reads one storage file from disk |
| ARCCore.UtilCore.AssertCurrentlyStartingUp | ARCCore | ClassMember | Normally called from non-thread safe methods that should be run single-threaded at application startup only. |
| ARCCore.UtilCore.DoubleTryParse | ARCCore | ClassMember | Note that treats ',' (comma) as decimal point (not as thousands separator). |
| ARCCore.UtilCore.EnumTryParse | ARCCore | ClassMember | Same as the inbuilt .NET method -TryParse- but with some additional checks. |
| ARCCore.UtilCore.TryGetTypeFromStringNoCache | ARCCore | ClassMember | See -TryGetTypeFromStringFromCache- for documentation. |
| ARCCore.UtilCore.TryGetTypeFromStringFromCache | ARCCore | ClassMember | Corresponding method for creating string-representation of type is -ToStringDB-. |
| ARCCore.UtilCore.GetExceptionChainAsString | ARCCore | ClassMember | Follows the chain of InnerException and returns types as comma-separated string |
| ARCCore.UtilCore.GetExeptionDetails | ARCCore | ClassMember | Gives as much information about exception as possible. |
| ARCCore.UtilCore.DateTimeTryParse | ARCCore | ClassMember | Accepts on of the formats specified in -ValidDateTimeFormats-. |
| ARCCore.TIP.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.BaseAttribute+IncorrectAttributeTypeUsedException | ARCCore | Class | Helps to clean up any confusion about which -BaseAttribute- to use in a given concept. |
| ARCCore.PK+BasePKAttributeNotFoundException<T> | ARCCore | Class | Explains how to implement a given -BasePKAttribute- for an enum |
| ARCCore.PK+PKBoolPair | ARCCore | Class | Used to signify that a given -PK- returned from value factory inside -FromEnum- has not been initialized (has not yet been populated with -PKTypeAttribute- collection). |
| ARCCore.PK+PKBoolPair.TrulyInitialized | ARCCore | ClassMember | Not used currently (May 2020). Useful for debugging purposes |
| ARCCore.StreamProcessor+StorageFile | ARCCore | Class | |
| ARCCore.StreamProcessor+StorageFile.Filepath | ARCCore | ClassMember | Complete path to file |
| ARCCore.StreamProcessor+StorageFile.Filename | ARCCore | ClassMember | Filename: Main file name, like 2020-04-03 08:42 |
| ARCCore.ClassMemberAttributeP.DeclaringType | ARCCore | EnumMember | The actual MemberInfo.DeclaringType. |
| ARCCore.ClassMemberAttributeP.MethodName | ARCCore | EnumMember | The actual MemberInfo.Name. |
| ARCCore.ClassMemberAttributeP.MethodSignature | ARCCore | EnumMember | The actual MemberInfo.ToString. |
| ARCCore.EnumAttributeP | ARCCore | Enum | Describes class -EnumAttribute-. |
| ARCCore.EnumAttributeP.AssemblyName | ARCCore | EnumMember | The assembly in which this class resides. |
| ARCCore.EnumAttributeP.EnumNamespace | ARCCore | EnumMember | The namespace for -EnumType-. |
| ARCCore.EnumAttributeP.EnumType | ARCCore | EnumMember | The type of the enum (like type of 'CustomerP' in CustomerP.FirstName) that we are an attribute for |
| ARCCore.EnumAttributeP.AREnumType | ARCCore | EnumMember | Note that will default to -__invalid- if not explicit set. |
| ARCCore.ARConcepts.CoreDBSynchronization | ARCCore | EnumMember | The concept of how multiple -CoreDB- instances synchronizes their data. |
| ARCCore.ARConcepts.SingleThreadedCode | ARCCore | EnumMember | Some practical choices have been made in AgoRapide which requires object access to be done in a single-threaded manner, or within a locking context (using for instance -ReaderWriterLockSlim-). |
| ARCCore.ARConcepts.DataRetention | ARCCore | EnumMember | The concept of when to delete old data (if deemed necessary). |
| ARCCore.ARConcepts.NoRealDeletion | ARCCore | EnumMember | AgoRapide has no real concept for deletion of data (apart from -DataRetention-, which is mostly relevant for 'old' data). |
| ARCCore.ARConcepts.ManyToManyRelations | ARCCore | EnumMember | -ARCQuery- supports many-to-many relations in a simple manner without introducing a third entity type (a third table). |
| ARCCore.ARConcepts.Documentation | ARCCore | EnumMember | Thanks to the tagging of enums and classes in AgoRapide (like this description), automatically generation of documentation is possible. |
| ARCCore.ARConcepts.AssertionsAndDetailedExceptionMessages | ARCCore | EnumMember | The abstraction level in AgoRapide is very high. |
| ARCCore.ARConcepts.ExposingApplicationState | ARCCore | EnumMember | The traditional debugging process usually entails reading through logs and querying about your application state through a debugging tool. |
| ARCCore.PSPrefix.dtr | ARCCore | EnumMember | Data, whole records. |
| ARCCore.PSPrefix.RS | ARCCore | EnumMember | RS = Registration Stream (see -RegStream-). |
| ARCCore.PSPrefix.ES | ARCCore | EnumMember | ES = Event Stream (see -EventStream-). |
| ARCCore.PSPrefix.cmd | ARCCore | EnumMember | Command. |
| ARCCore.PSPrefix.app | ARCCore | EnumMember | Application state, like app/ |
| ARCCore.PSPrefix.doc | ARCCore | EnumMember | Documentation. |
| ARCCore.PSPrefix.t | ARCCore | EnumMember | Translations. |
| ARCCore.PKHTMLAttributeP | ARCCore | Enum | Describes class -PKRelAttribute-. |
| ARCCore.PConcurrentP | ARCCore | Enum | Describes class -PConcurrent-. |
| ARCCore.PConcurrentP.Heartbeat | ARCCore | EnumMember | |
| ARCCore.ActualConnectionP | ARCCore | Enum | Describes class -ActualConnection-. |
| ARCCore.ActualConnectionP.Id | ARCCore | EnumMember | When connection is used with-StreamProcessor-, the Id should be the same as the key used in the incoming / outgoing connection dictionary collection. |
| ARCCore.ActualConnectionP.ConnectionInstruction | ARCCore | EnumMember | Only relevant when we are an -Outgoing-. |
| ARCCore.ActualConnectionP.ConnectionDirection | ARCCore | EnumMember | |
| ARCCore.ActualConnectionP.CountReceiveMessage | ARCCore | EnumMember | |
| ARCCore.ActualConnectionP.CountSendMessage | ARCCore | EnumMember | |
| ARCCore.ConnectionInstruction.Initialize | ARCCore | ClassMember | Initializes to sane values. |
Generated 2025-09-23 23:16:11.040 UTC