[ROOT] doc DocFrag SELECT Assembly, DocFragType, Description.FirstLine() < SKIP 173 > < TAKE 120 >

120 items

DocFragId	Assembly	DocFragType	Description.FirstLine()
ARCCore.PValue<T>.DeepCopy	ARCCore	ClassMember	Note that if the generic type (T) is not immutable, then what we return will not be a truly deep copy.
ARCCore.PValue<T>..ctor	ARCCore	ClassMember	Note how this class does not have a parameter-less constructor (unlike all other -IP--derived classes in AgoRapide)
ARCCore.PValueEmpty	ARCCore	Class	Represents the 'no value'.
ARCCore.PValueEmpty.TrySetP	ARCCore	ClassMember	NOTE: -TryStore- is explicit aware that -PValue- and -PValueEmpty-
ARCCore.ActualConnection.Send	ARCCore	ClassMember	Sends all messages in queue.
ARCCore.ActualConnection.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.ActualConnection..ctor	ARCCore	ClassMember	Note parameter-less constructor as desired for all classes inheriting -IP-.
ARCCore.MonkeyWrench	ARCCore	Class	Describes level of 'spanner-throwing' this connection shall contibute with
ARCCore.ClientUpdatePosition	ARCCore	Class	Describes from WHERE (from WHEN) in the historic -PropertyStream- new data is to be returned.
ARCCore.ClientUpdatePosition.Filename	ARCCore	ClassMember	Filename like '2020-04-03 08:42:22_R001'
ARCCore.ClientUpdatePosition.Index	ARCCore	ClassMember	Index (zero-based) into file. Value of -1 means blank update status / no data received at all (or no data received for this specific filename)
ARCCore.ClientUpdatePosition.ClientDatastoreIsEmpty	ARCCore	ClassMember	Used by the subscribing client to signify that it has no data stored locally, and it therefore needs an update from the beginning of the -PropertyStream-, that is, 'from the beginning of time'.
ARCCore.ConnectionInstruction.TryGetV	ARCCore	ClassMember	Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.ConnectionInstruction.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.Sharding	ARCCore	Class	Enables load-balancing by describing what data should be sent over a given connection.
ARCCore.PropertyStreamLine	ARCCore	Class	Has two main functions:
ARCCore.PropertyStreamLine.EncodeKeys	ARCCore	ClassMember	Encodes the key part of a -PropertyStreamLine-.
ARCCore.PropertyStreamLine.EncodeValues	ARCCore	ClassMember	Typically used when turning -WholeCollection- into a value part of a -PropertyStreamLine-.
ARCCore.PropertyStreamLine.EncodeKeyPart	ARCCore	ClassMember	Converts a single key part of a -PropertyStreamLine- to a format suitable for sending over a -PropertyStream-.
ARCCore.PropertyStreamLine.EncodeValuePart	ARCCore	ClassMember	Converts a single value part of a -PropertyStreamLine- to a format suitable for sending over a -PropertyStream-.
ARCCore.BaseAttribute	ARCCore	Class	Instances of this class are used as source of documentation and data for the API.
ARCCore.BaseAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.BaseAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.BaseAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.BasePKAttribute.GetAttributes	ARCCore	ClassMember	Note that illegal to call for other than -PropertyKeyEnum-.
ARCCore.BasePKAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.BasePKAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.BasePKAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.ClassAttribute	ARCCore	Class	Describes a class.
ARCCore.ClassAttribute.GetAttribute	ARCCore	ClassMember	Throws exception if type implements -IP- and no corresponding enum found (enum ending with capital letter 'P' (like 'CustomerP' for enum describing class 'Customer' for instance)
ARCCore.ClassAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.ClassAttribute.TryGetAsTypeScript	ARCCore	ClassMember	Generates typescript code corresponding to the class which this instance describes.
ARCCore.ClassAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.ClassAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.ClassMemberAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.ClassMemberAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.EnumAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.EnumAttribute.TryGetAsTypeScript	ARCCore	ClassMember	Generates typescript code corresponding to the enum which this instance describes.
ARCCore.EnumMemberAttribute	ARCCore	Class	Describes an enum's value.
ARCCore.EnumMemberAttribute.GetAttribute	ARCCore	ClassMember	Note that illegal to call for -PropertyKeyEnum-.
ARCCore.EnumMemberAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.EnumMemberAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.Extensions.ToStringShort	ARCCore	ClassMember	Returns a shorter representation than -ToStringDB-.
ARCCore.Extensions.ToStringVeryShort	ARCCore	ClassMember	Returns same as -ToStringShort- but without any generics information at all.
ARCCore.Extensions.Use	ARCCore	ClassMember	Convenience method that shortens down code in cases where an instance of an object must be created first in order to use that same variable multiple times
ARCCore.Extensions.AddValue	ARCCore	ClassMember	Gives better error messages compared to 'original' Add when adding a value to a directory if key already exists
ARCCore.Extensions.KeysAsString	ARCCore	ClassMember	Gives a compressed overview of keys in a dictionary. Helpful for building exception messages.
ARCCore.Extensions.GetValue	ARCCore	ClassMember	Gives better error messages when reading value from directory if key does not exist
ARCCore.IKIP.AssertTypeIntegrity	ARCCore	ClassMember	See -TryAssertTypeIntegrity- for documentation.
ARCCore.IKIP.TryAssertTypeIntegrity	ARCCore	ClassMember	Asserts that value is of correct type as specified by the key.
ARCCore.IK	ARCCore	Class	IK = Interface Key / Index key. Key used to lookup 'inside' an instance of -IP-.
ARCCore.IKCoded	ARCCore	Class	Understands coded and unencoded variants of -IK-.
ARCCore.IKCoded.FromEncoded	ARCCore	ClassMember	Note how uses instance cache if already exists there.
ARCCore.IKCoded.TryEncode	ARCCore	ClassMember	Returns a string containing only characters in -AllowedEncodedCharacters-.
ARCCore.IKCoded.ToString	ARCCore	ClassMember	Returns -Encoded-'s string representation.
ARCCore.IKCoded.Encoded	ARCCore	ClassMember	This string value can be used directly in folder names, file names and HTTP URL's without any further encoding being necessary.
ARCCore.IKDate.ValidDateTimeFormats	ARCCore	ClassMember	Note: Be very careful about expanding this array. ToString must be considered, and also how Equals should work with other sub classes of IK.
ARCCore.IKLong	ARCCore	Class	A more memory efficient alternative to -IKString-.
ARCCore.IKLong.op_Equality	ARCCore	ClassMember	It is quite natural in the code to write code like "if (a.CustomerId == b.CustomerId)", therefore the need to implement == and != operators here.
ARCCore.IKLong.EnrichKey	ARCCore	ClassMember	'Implementing' -ITypeDescriber-.
ARCCore.StreamProcessor	ARCCore	Class	Implements the storage mechanism for AgoRapide.
ARCCore.StreamProcessor.CreateBareBonesInstance	ARCCore	ClassMember	Creates a bare-bones -StreamProcessor- instance.
ARCCore.StreamProcessor.Initialize	ARCCore	ClassMember	Initializes this instance of -StreamProcessor-
ARCCore.StreamProcessor.AddOrRemoveOutgoingConnections	ARCCore	ClassMember	Not relevant for -CoreDB-.
ARCCore.StreamProcessor.StartTCPIPCommunication	ARCCore	ClassMember	Starts communicating over TCP/IP.
ARCCore.StreamProcessor.ReceiveAndDistribute	ARCCore	ClassMember	Process all messages in receive queue.
ARCCore.StreamProcessor.AddTimestampAsRequired	ARCCore	ClassMember	Adds -Timestamp- to the property stream (to -_queueReceive-) as specified by -TimestampResolution-.
ARCCore.StreamProcessor.ReadStorageFile	ARCCore	ClassMember	Reads one storage file from disk
ARCCore.StreamProcessor.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.StreamProcessor.OutsideLocalReceiver	ARCCore	ClassMember	The outside (in the sense outside of this class) local mechanism which receives all -PropertyStreamLine- registered by this class.
ARCCore.PropertyStreamLineWithOrigin	ARCCore	Class	The rationale for this class is that -ReceiveAndDistribute- needs to distingush origin of data when routing it (in general, in order to avoid sending it back to its source).
ARCCore.PropertyStreamLineWithOrigin.HasLocalOrigin	ARCCore	ClassMember	Locally generated data is not to be sent to -OutsideLocalReceiver-). We instead leave it to the 'outside' to decide if
ARCCore.UtilCore.AssertCurrentlyStartingUp	ARCCore	ClassMember	Normally called from non-thread safe methods that should be run single-threaded at application startup only.
ARCCore.UtilCore.DoubleTryParse	ARCCore	ClassMember	Note that treats ',' (comma) as decimal point (not as thousands separator).
ARCCore.UtilCore.EnumTryParse	ARCCore	ClassMember	Same as the inbuilt .NET method -TryParse- but with some additional checks.
ARCCore.UtilCore.TryGetTypeFromStringNoCache	ARCCore	ClassMember	See -TryGetTypeFromStringFromCache- for documentation.
ARCCore.UtilCore.TryGetTypeFromStringFromCache	ARCCore	ClassMember	Corresponding method for creating string-representation of type is -ToStringDB-.
ARCCore.UtilCore.GetExceptionChainAsString	ARCCore	ClassMember	Follows the chain of InnerException and returns types as comma-separated string
ARCCore.UtilCore.GetExeptionDetails	ARCCore	ClassMember	Gives as much information about exception as possible.
ARCCore.UtilCore.DateTimeTryParse	ARCCore	ClassMember	Accepts on of the formats specified in -ValidDateTimeFormats-.
ARCCore.UtilCore.TimeSpanTryParse	ARCCore	ClassMember	Accepts on of the formats specified in -ValidDateTimeFormats-.
ARCCore.UtilCore.UseLocalTimeInsteadOfUTC	ARCCore	ClassMember	By default AgoRapide operates only with UTC time.
ARCCore.UtilCore.DateTimeNow	ARCCore	ClassMember	Returns DateTime.UtcNow unless -UseLocalTimeInsteadOfUTC- has been set to TRUE in which case DateTime.Now is returned.
ARCCore.UtilCore.CurrentlyStartingUp	ARCCore	ClassMember	Called once at application startup after all Attribute instances in the C# code has been processed.
ARCCore.PropertyStreamLine.Decode	ARCCore	ClassMember	Decodes string as encoded by -EncodeKeyPart- or -EncodeValuePart-.
ARCCore.PropertyStreamLine.TryParseDirectToIP	ARCCore	ClassMember	Parses a series of -PropertyStreamLine- directly to the given type of -IP-.
ARCCore.PropertyStreamLine.TryParseDirectToProperty	ARCCore	ClassMember	Parses direct to a given property value.
ARCCore.PropertyStreamLine.ParseAndStore	ARCCore	ClassMember	Note that throws exception if -TryParseAndStore- fails.
ARCCore.PropertyStreamLine.ParseAndStoreFailSafe	ARCCore	ClassMember	If either parsing or storing fails then this method will call -StoreFailure- in order to keep some track of why parsing or storing failed.
ARCCore.PropertyStreamLine.StoreFailSafe	ARCCore	ClassMember	Stores if possible and fails silently.
ARCCore.PropertyStreamLine.StoreFailure	ARCCore	ClassMember	Stores a 'ParseOrStoreFailure'-object.
ARCCore.PropertyStreamLine.TryStore	ARCCore	ClassMember	Stores the given -PropertyStreamLineParsed- in the given storage object.
ARCCore.PropertyStreamLineWithOrigin.SendToLocalReceiver	ARCCore	ClassMember	Means 'send to local receiver regardless of origin'.
ARCCore.PropertyStreamLineWithOrigin.DoNotAddTimestamp	ARCCore	ClassMember	Normally -StreamProcessor- inserts the required -Timestamp-s in the AgoRapide storage.
ARCCore.PropertyStreamLineWithOrigin.ReceivedFromOutgoing	ARCCore	ClassMember	Data received from an outgoing connection, that is, data received based on 'this' application's subscription request (as subscribing client).
ARCCore.StorageFile	ARCCore	Class	Implemented only in order to store some ideas about -Hash-.
ARCCore.StorageFile.TryGetP	ARCCore	ClassMember	Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway.
ARCCore.StorageFile.TryGetV	ARCCore	ClassMember	Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.StorageFile.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.Subscription	ARCCore	Class	A stream -Subscription- is the concept of how nodes (see -ARNodeType-) subscribe to the -PropertyStream- (either the whole stream or just part of it) in a distributed manner.
ARCCore.Subscription.FromTime	ARCCore	ClassMember	TODO: Implement concept of specifying starting-point in TIME (often for an -AdHocQuery-?).
ARCCore.Subscription.ToTime	ARCCore	ClassMember	TODO: Implement concept of specifying ending-point in TIME (often for an -AdHocQuery-?).
ARCCore.Subscription.IsMatch Overload1	ARCCore	ClassMember	Evaluates a query consisting of multiple instances of -Subscription- against a single property stream line.
ARCCore.Subscription.IsMatch Overload2	ARCCore	ClassMember	Evaluates this instance of -Subscription- against a single property stream line (which has been split up into its constituent elements).
ARCCore.Subscription.SyntaxHelp	ARCCore	ClassMember	'+*' Subscribe to everything in database.
ARCCore.Subscription.IsAdd	ARCCore	ClassMember	Corresponds to whether value starts with a plus sign, '+' or not.
ARCCore.Subscription.IsRemove	ARCCore	ClassMember	Corresponds to whether value starts with a minus sign, '+' or not.
ARCCore.UtilCore	ARCCore	Class	Utility methods for -ARCCore-.
ARCCore.REx.Dec	ARCCore	ClassMember	This method should be called from inside a 'finally' block, in order to secure its execution, if not then your static recursion depth counter could slowly increase over time due to exceptions ocurring after call to -Inc- but before call to -Dec-.
ARCCore.InvalidTypeException	ARCCore	Class
ARCCore.InvalidTypeException.AssertAssignable	ARCCore	ClassMember	Asserts that expectedType.IsAssignableFrom(foundType)
ARCCore.InvalidTypeException.AssertEquals	ARCCore	ClassMember	Asserts that expectedType.Equals(foundType)
ARCCore.TValue	ARCCore	Class	Placeholder for any class type suitable as generic type parameter -PValue-.
ARCCore.TIP	ARCCore	Class	Placeholder for any class type suitable as generic type parameter restricted to -IP.
ARCCore.TIP.TryGetP	ARCCore	ClassMember	Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway.
ARCCore.TIP.TryGetV	ARCCore	ClassMember	Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.TIP.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.BaseAttribute+IncorrectAttributeTypeUsedException	ARCCore	Class	Helps to clean up any confusion about which -BaseAttribute- to use in a given concept.
ARCCore.PK+BasePKAttributeNotFoundException<T>	ARCCore	Class	Explains how to implement a given -BasePKAttribute- for an enum
ARCCore.PK+PKBoolPair	ARCCore	Class	Used to signify that a given -PK- returned from value factory inside -FromEnum- has not been initialized (has not yet been populated with -PKTypeAttribute- collection).

Generated 2026-06-28 01:09:26.086 UTC