[ROOT]  doc  DocFrag  SELECT Assembly, DocFragType, Description.FirstLine()   <  SKIP 19  >   <  TAKE 192  >   

192 items

DocFragIdAssemblyDocFragTypeDescription.FirstLine()
ARCCore.CardinalityExtensions.IsMultipleARCCoreClassMemberReturns TRUE if given cardinality implies that multiple items are stored simultaneously in a typical in-memory data storage.
ARCCore.EnumAttribute.TryGetAsTypeScriptARCCoreClassMemberGenerates typescript code corresponding to the enum which this instance describes.
ARCCore.Extensions.ForEachARCCoreClassMemberUseful when we want to write collection.ForEach( ... ) instead of
ARCCore.EnumMemberAttributeARCCoreClassDescribes an enum's value.
ARCCore.Extensions.UseARCCoreClassMemberConvenience method that shortens down code in cases where an instance of an object must be created first in order to use that same variable multiple times
ARCCore.EnumMemberAttribute.GetAttributeARCCoreClassMemberNote that illegal to call for -PropertyKeyEnum-.
ARCCore.Extensions.ToStringDateAndTimeARCCoreClassMemberUses format 'yyyy-MM-dd HH:mm:ss.fff'.
ARCCore.EnumMemberAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.Extensions.ToStringWithMSARCCoreClassMemberUses either format 'd\.hh\:mm\:ss\.fff' or 'hh\:mm\:ss\.fff' depending on TotalHours >=24 hours or not.
ARCCore.EnumMemberAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.IKCoded.TryCheckValidEncodedValueARCCoreClassMemberChecks if encoded value is valid.
ARCCore.ExtensionsARCCoreClassContains a few general nice to have extensions methods.
ARCCore.IKCoded.FromCacheEncodedARCCoreClassMemberReduces number of objects generated by caching those known to be within a limited range
ARCCore.Extensions.ToStringShortARCCoreClassMemberReturns a shorter representation than -ToStringDB-.
ARCCore.IKDateARCCoreClassA more memory efficient alternative to -IKString- (together with -IKLong-).
ARCCore.Extensions.AddValueARCCoreClassMemberGives better error messages compared to 'original' Add when adding a value to a directory if key already exists
ARCCore.IKDate.op_EqualityARCCoreClassMemberIt is quite natural in the code to write code like "if (a.CustomerId == b.CustomerId)", therefore the need to implement == and != operators here.
ARCCore.Extensions.KeysAsStringARCCoreClassMemberGives a compressed overview of keys in a dictionary. Helpful for building exception messages.
ARCCore.IKString.FromCacheARCCoreClassMemberReduces number of objects generated by caching those known to be within a limited range
ARCCore.Extensions.SingleOrDefaultARCCoreClassMemberSame as inbuilt LINQ's SingleOrDefault except that gives a more friendly exception message
ARCCore.IKString.FromStringARCCoreClassMemberNote how uses instance cache if already exists there
ARCCore.Extensions.ResultARCCoreClassMemberReturns heading plus return-value of function (calls function). If function == null then empty string is returned
ARCCore.ParseResultARCCoreClassNOTE: Concept is very old, from the dark ages of AgoRapide's very first inception. There might be room for improvement.
ARCCore.IKIPARCCoreClassContainer class for key (-IK-), and value (-IP-).
ARCCore.ParseResult.ResultARCCoreClassMemberWill be null if ErrorResponse is set.
ARCCore.IKIP.AssertTypeIntegrityARCCoreClassMemberSee -TryAssertTypeIntegrity- for documentation.
ARCCore.PK.TryGetEnumARCCoreClassMemberNote that usually you will not have to ask for this value, usually in AgoRapide it goes the other way around, you have the enum member / enum value and want the corresponding property key.
ARCCore.IKCodedARCCoreClassUnderstands coded and unencoded variants of -IK-.
ARCCore.PK.TryGetVARCCoreClassMemberOnly type of PK, string or type of __enum is allowed to ask for (as TRequest generic type parameter).
ARCCore.IKCoded.EnrichKeyARCCoreClassMember'Implementing' -ITypeDescriber-.
ARCCore.PK.PackParseResultForStorageInEntityObjectARCCoreClassMemberPacks result of parsing into a -IP--derived class, suitable for sending to -AddOrUpdateP-.
ARCCore.IKCoded.FromCacheUnencodedARCCoreClassMemberReduces number of objects generated by caching those known to be within a limited range
ARCCore.PK.PackObjectForStorageInEntityObjectARCCoreClassMemberSee -PackParseResultForStorageInEntityObject- for documentation.
ARCCore.IKCoded.FromEncodedARCCoreClassMemberNote how uses instance cache if already exists there.
ARCCore.PK.FromEnumARCCoreClassMemberReturns the corresponding -PK- instance from the given -PropertyKeyEnum-.
ARCCore.IKCoded.TryEncodeARCCoreClassMemberReturns a string containing only characters in -AllowedEncodedCharacters-.
ARCCore.PK.TryGetFromTypeAndFieldName Overload3ARCCoreClassMemberReturns property key based on type and field name.
ARCCore.IKCoded.ToStringARCCoreClassMemberReturns -Encoded-'s string representation.
ARCCore.PK.TryGetPARCCoreClassMemberMade virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway.
ARCCore.IKDate.EnrichKeyARCCoreClassMember'Implementing' -ITypeDescriber-.
ARCCore.PK..ctorARCCoreClassMemberConstructor with 'object _enum' is necessary in order for ToString to work.
ARCCore.IKDate.ValidDateTimeFormatsARCCoreClassMemberNote: Be very careful about expanding this array. ToString must be considered, and also how Equals should work with other sub classes of IK.
ARCCore.PK.TypeARCCoreClassMemberReturns type from -PKTypeAttribute-'s -Type-.
ARCCore.IKLongARCCoreClassA more memory efficient alternative to -IKString-.
ARCCore.PK.CardinalityARCCoreClassMemberReturns cardinality from -PKTypeAttribute-'s -Cardinality-.
ARCCore.IKLong.op_EqualityARCCoreClassMemberIt is quite natural in the code to write code like "if (a.CustomerId == b.CustomerId)", therefore the need to implement == and != operators here.
ARCCore.PK.AllPKEnumsARCCoreClassMemberAll -PropertyKeyEnum--tagged enums for the whole application.
ARCCore.IKString.op_EqualityARCCoreClassMemberIt is quite natural in the code to write code like "if (a.CustomerId == b.CustomerId)", therefore the need to implement == and != operators here.
ARCCore.PK.__enumARCCoreClassMemberThis information is also found as EnumMember.
ARCCore.IKString.EnrichKeyARCCoreClassMember'Implementing' -ITypeDescriber-.
ARCCore.PKHTMLAttributeARCCoreClassContains pointer to HTML encoder for a property.
ARCCore.IKTypeARCCoreClassIndex key used when storing a collection of a given type, like 'Customer'.
ARCCore.PKHTMLAttribute.EncodeARCCoreClassMemberEncodes the given string to HTML format through the static method implemented in class -Encoder-.
ARCCore.IKType.ToStringARCCoreClassMemberCaching is supposed to be useful because may be called quite often.
ARCCore.PKLogAttribute.DoNotLogAtAllARCCoreClassMemberSee -DoNotLogAtAll-.
ARCCore.PK.ModifyCleanerAndValidatorAndParserForCardinalityARCCoreClassMemberCalled from -Initialize- after _cleaner and _validatorAndParser have been set.
ARCCore.PKLogAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.PK.ToStringARCCoreClassMemberCaching is supposed to be useful because may be called quite often.
ARCCore.PKRelAttributeARCCoreClassDescribes relationships between entities (between tables in RDBMS terms).
ARCCore.PK.TryValidateAndParseARCCoreClassMemberParses the value according to specifications for this property key.
ARCCore.PKRelAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.PK.TryCleanValidateAndParseARCCoreClassMemberCleans and parses the value according to specifications for this property key.
ARCCore.PKTypeAttribute.DefaultValueARCCoreClassMemberSee -DefaultValue-.
ARCCore.PK.BuildFromStringCacheARCCoreClassMemberBuilds the content of -_fromStringCache- and also -_allPKForEntityTypeCache-.
ARCCore.PKTypeAttribute.IsObligatoryARCCoreClassMemberSee -IsObligatory-.
ARCCore.PK.GetTypeMappingARCCoreClassMemberReturns the relevant property key for a given type entity-type and field-type.
ARCCore.PKTypeAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.PK.GetObligatoryValuesForEntityTypeARCCoreClassMemberReturns all obligatory values (based on -IsObligatory-)
ARCCore.IPARCCoreClassIP = IProperty.
ARCCore.PK.EqualsARCCoreClassMemberNote that ToString is only based on __enum, meaning that two enum members / enum values with same name but different type, like CustomerP.Name and OrderP.Name, will be considered equal.
ARCCore.IP.LogExecuteTimeARCCoreClassMemberTimes the execution of the given function and logs details about elapsed time.
ARCCore.PKHTMLAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.IP.HandleExceptionARCCoreClassMemberNote that most relevant to use for -PConcurrent-.
ARCCore.PKHTMLAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.IP.TryParseDtrARCCoreClassMemberParses a PropertyStreamLine- beginning with -dtr-.
ARCCore.PKHTMLAttribute.EncoderARCCoreClassMemberSee -Encoder-.
ARCCore.IP.InitializeARCCoreClassMemberNote that has a default implementation (doing nothing).
ARCCore.PKHTMLAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.IP.DeepCopyARCCoreClassMemberCreates a deep copy of this object instance, that is, a copy with all new object instances (except for immutable objects).
ARCCore.PKRelAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.IP.AddPV Overload2ARCCoreClassMemberNOTE: The different AddPV / AddP overloads should only be used if you want an assertion against the
ARCCore.PKRelAttribute.ForeignEntityARCCoreClassMemberSee -ForeignEntity-.
ARCCore.IP.AddPV Overload1ARCCoreClassMemberAdds a property value (as a -PValue-) for this objectThrows -KeyAlreadyExistsException- when relevant.
ARCCore.PKRelAttribute.OppositeTermARCCoreClassMemberSee -OppositeTerm-.
ARCCore.IP.AddPARCCoreClassMemberAdds a property for this object.
ARCCore.PKRelAttribute.EnforceReferentialIntegrityARCCoreClassMemberSee -EnforceReferentialIntegrity-.
ARCCore.IP.GetPVARCCoreClassMemberGets a single property's value for this object. Returns default value if not successful.
ARCCore.PKTypeAttribute.StandardCleanerARCCoreClassMemberReturns a cleaner for well known types like bool
ARCCore.IP.TryGetPVARCCoreClassMemberGets a single property's value for the given property key.
ARCCore.PKTypeAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.IP.IsValidARCCoreClassMemberNote that by default all properties are 'valid' but because of -NoRealDeletion-, we must have a mechanism for invalidating properties. This property returns FALSE if property has been invalidated and timestamp for invalidation is not '0001-01-01'.
ARCCore.PKTypeAttribute.TypeARCCoreClassMemberSee -Type-.
ARCCore.IP.ItemARCCoreClassMemberOffers string-based direct indexing.
ARCCore.PKTypeAttribute.CardinalityARCCoreClassMemberSee -Cardinality-.
ARCCore.P.ToStringARCCoreClassMemberTODO: Decide on what we actually want with ToString for this class.
ARCCore.IP.GetKeysEqualToValueARCCoreClassMemberReturns properties which themselves again have key and value equal to the given key and value.
ARCCore.ICreatedARCCoreClassA dummy interface signifying that implementing class has the ability to store (in-memory) metadata -Created-
ARCCore.IP.OnTrySetPARCCoreClassMemberEvent handler to be called by -TrySetP- before it changes a property value (but AFTER it has done any validity checks, that is, after it has 'decided' to return TRUE, in other words, event handler should be called when change is guaranteed to go through, but before it actually has been done).
ARCCore.PCollectionARCCoreClassA class useful for storing a collection of entities (a table in RDBMS-terms) because it implements -Indexing-.
ARCCore.IP.TryGetPARCCoreClassMemberGets a single property for this object
ARCCore.PCollection.TrySetPPARCCoreClassMemberReplaces default interface method -TrySetPP-.
ARCCore.IP.ToPropertyStreamARCCoreClassMemberTurns object into a -PropertyStream-
ARCCore.PCollection.GetKeysEqualToValueARCCoreClassMemberReturns properties which themselves again have key and value equal to the given key and value.
ARCCore.IP.ToJSONSerializeableARCCoreClassMemberPrepares the data into a format acceptable for System.Text.Json.JsonSerializer.Serialize.
ARCCore.PCollection.TryGetPARCCoreClassMemberMade virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway.
ARCCore.IP.GetValueForJSONSerializerARCCoreClassMemberPractical approach to serializing of -IP- based values to JSON.
ARCCore.PCollection.TryGetVARCCoreClassMemberNote that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.IP.TrySetPARCCoreClassMemberSet property regardless of whether exists or not.
ARCCore.PCollection.ToStringARCCoreClassMemberTODO: Decide on what we actually want with ToString for this class.
ARCCore.IP.TryGetV Overload1ARCCoreClassMemberThe actual 'unpacking' of the object.
ARCCore.BaseAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.BasePKAttributeARCCoreClassThe class containing the actual attributes used for -TaggingOfPropertyKeys-.
ARCCore.IP.AddOrUpdatePARCCoreClassMemberDuplicates functionality of SetP.
ARCCore.BasePKAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.IP.GetOrAddPVARCCoreClassMemberGets value. If not set then value will be added
ARCCore.ClassAttribute.GetAttributeARCCoreClassMemberThrows exception if type implements -IP- and no corresponding enum found (enum ending with capital letter 'P' (like 'CustomerP' for enum describing class 'Customer' for instance)
ARCCore.IP.KeysARCCoreClassMemberReturns all the keys for this instance.
ARCCore.ClassAttribute.TryGetAsTypeScriptARCCoreClassMemberGenerates typescript code corresponding to the class which this instance describes.
ARCCore.IP.ValuesARCCoreClassMemberReturns all the values (all the properties) for this instance.
ARCCore.ClassMemberAttributeARCCoreClassDescribes a member of a class (a method).
ARCCore.IP.LoggerARCCoreClassMemberDescribes a logger.
ARCCore.ClassMemberAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.IP.AllIPDerivedTypesARCCoreClassMemberAll relevant -IP--derived types for the whole application.
ARCCore.EnumAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.P.TryGetVARCCoreClassMemberNote that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.IPAttributeARCCoreClassDescribes -IP- classes (describes at class-level)
ARCCore.IGetKeysEqualToValueARCCoreClassInterface stating that implementing class does not use the default implementation of -GetKeysEqualToValue- (which does not use -Indexing-) but has replaced it with a more efficient implementation assumed to utilize -Indexing-.
ARCCore.Extensions.ToStringVeryShortARCCoreClassMemberReturns same as -ToStringShort- but without any generics information at all.
ARCCore.PConcurrentARCCoreClassA (somewhat) thread-safe alternative to -PRich- which also supports -ExposingApplicationState- (through -Logger-).
ARCCore.Extensions.ToStringDBARCCoreClassMemberGives the minimum representation of type as string suitable for later reconstruction by -GetType-.
ARCCore.PConcurrent.ToStringARCCoreClassMemberTODO: Decide on what we actually want with ToString for this class.
ARCCore.Extensions.GetValueARCCoreClassMemberGives better error messages when reading value from directory if key does not exist
ARCCore.PExact<TEnumType>ARCCoreClassVery -MemoryConsumption- efficient alternative to -PRich-.
ARCCore.Extensions.SingleARCCoreClassMemberSame as inbuilt LINQ's Single except that gives a more friendly exception message
ARCCore.PExact<TEnumType>.SetPVDirectARCCoreClassMemberHigh performance alternative to -TrySetP-, accessing -Storage- more direct.
ARCCore.IKIP.TryAssertTypeIntegrityARCCoreClassMemberAsserts that value is of correct type as specified by the key.
ARCCore.PExact<TEnumType>.GetPVDirectARCCoreClassMemberHigh performance alternative to -TryGetP-, accessing -Storage- more direct.
ARCCore.IKARCCoreClassIK = Interface Key / Index key. Key used to lookup 'inside' an instance of -IP-.
ARCCore.PExact<TEnumType>.TryGetPVDirectARCCoreClassMemberHigh performance alternative to -TryGetP-, accessing -Storage- more direct.
ARCCore.IKCoded.EncodedARCCoreClassMemberThis string value can be used directly in folder names, file names and HTTP URL's without any further encoding being necessary.
ARCCore.PExact<TEnumType>.ToStringARCCoreClassMemberTODO: Decide on what we actually want with ToString for this class.
ARCCore.IKCoded.AllowedEncodedCharactersARCCoreClassMemberThe character set 'A...Za...z0...9-_().,='.
ARCCore.PValue<T>.TrySetPARCCoreClassMemberNOTE: -TryStore- is explicit aware that -PValue- and -PValueEmpty-
ARCCore.IKLong.EnrichKeyARCCoreClassMember'Implementing' -ITypeDescriber-.
ARCCore.PValue<T>.TryGetVARCCoreClassMemberSupports duck typing.
ARCCore.IKStringARCCoreClassIndex key for any general id, like primary-key or sequence-number or similar.
ARCCore.PValue<T>.ConvertObjectToStringARCCoreClassMemberConverts object to string.
ARCCore.ITypeDescriberARCCoreClassProvides a standardized mechanism for describing single-property values (like 'PhoneNumber' of 'Customer' for instance).
ARCCore.PValue<T>.ToStringARCCoreClassMemberDo no cache this value, because memory consumption would then increase significantly in your applicationj
ARCCore.ITypeDescriber.GetSyntaxHelpARCCoreClassMemberEnables explanation of syntax in different contexts from one source:
ARCCore.PValue<T>.DeepCopyARCCoreClassMemberNote that if the generic type (T) is not immutable, then what we return will not be a truly deep copy.
ARCCore.ParseResult.ErrorResponseARCCoreClassMemberWill be null if Result is set
ARCCore.PValue<T>..ctorARCCoreClassMemberNote how this class does not have a parameter-less constructor (unlike all other -IP--derived classes in AgoRapide)
ARCCore.PKARCCoreClassPK = AgoRapide PropertyKey.
ARCCore.ActualConnection.CommunicateARCCoreClassMemberCommon for both -Incoming- and -Outgoing-.
ARCCore.PK.GetAARCCoreClassMemberConvenience method for easy access to -BasePKAttribute- with corresponding explaining exception if fails
ARCCore.ActualConnection.LogAndSendErrorConditionDataARCCoreClassMemberCalled when a serious error condition has been discovered and connection should be terminated.
ARCCore.PK.TryGetAARCCoreClassMemberConvenience method for easy access to -BasePKAttribute-.
ARCCore.ClientUpdatePosition.OnlyNewDataIsRequestedARCCoreClassMemberUsed by the subscribing client to signify that it does not care about historical data, the server may start with sending only new data.
ARCCore.PK.TryGetFromTypeAndFieldName Overload2ARCCoreClassMemberReturns property key based on type and field name.
ARCCore.ClientUpdatePosition.IsGoBackARCCoreClassMemberHas to be translated by -StreamProcessor- into a concrete filename / index.
ARCCore.PK.TryGetFromTypeAndFieldName Overload1ARCCoreClassMemberReturns property key based on type and field name.
ARCCore.ClientUpdatePosition.IsAtEndOfStreamARCCoreClassMemberNecessary in order to implement -AdHocQuery-.
ARCCore.PK.GetAllPKForEntityTypeARCCoreClassMemberReturns all property keys relevant for the given entity type,
ARCCore.ClientUpdatePosition.ClientDatastoreIsEmptyInstanceARCCoreClassMemberSee also -ClientDatastoreIsEmpty.
ARCCore.PK.GetAllPKForEntityTypeStringARCCoreClassMemberReturns all property keys relevant for the given entity type,
ARCCore.PropertyStreamLine.EncodeKeysARCCoreClassMemberEncodes the key part of a -PropertyStreamLine-.
ARCCore.PK.CorrespondingClassARCCoreClassMemberReturns -CorrespondingClass- based on -__enum-.
ARCCore.PropertyStreamLine.EncodeValuesARCCoreClassMemberTypically used when turning -WholeCollection- into a value part of a -PropertyStreamLine-.
ARCCore.PK.ValidatorAndParserARCCoreClassMemberValidates and parses a value.
ARCCore.PropertyStreamLine.EncodeKeyPartARCCoreClassMemberConverts a single key part of a -PropertyStreamLine- to a format suitable for sending over a -PropertyStream-.
ARCCore.PK.CleanerARCCoreClassMemberCleanup of values, to be used before value is attempted validated.
ARCCore.PropertyStreamLine.EncodeValuePartARCCoreClassMemberConverts a single value part of a -PropertyStreamLine- to a format suitable for sending over a -PropertyStream-.
ARCCore.PK.AllEnumsARCCoreClassMemberAll enums for the whole application.
ARCCore.PropertyStreamLine.AllowedKeyCharsARCCoreClassMemberAllowed characters in the Key-part of a -PropertyStreamLine-.
ARCCore.IHTMLEncoderARCCoreClassPseudo-interface signifying that implementing class has a static metod called 'Encode' for encoding a string to HTML.
ARCCore.PropertyStreamLine.AllowedValueCharsARCCoreClassMemberAllowed characters in the Value-part of a -PropertyStreamLine-.
ARCCore.PKLogAttributeARCCoreClassExplains how logging of changes to a property should be done.
ARCCore.PropertyStreamLineParsedARCCoreClassParses the keys part of a line from -PropertyStream-, like 'Customer/42/FirstName = John.
ARCCore.PKLogAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.PropertyStreamLineParsed.ToStringARCCoreClassMemberNote relatively complex operation of 'restoring' original property stream line.
ARCCore.PKLogAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.StreamProcessor.StartTCPIPCommunicationARCCoreClassMemberStarts communicating over TCP/IP.
ARCCore.PKRelAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.StreamProcessor.ReceiveAndDistributeARCCoreClassMemberProcess all messages in receive queue.
ARCCore.PKTypeAttributeARCCoreClassContains the most basic essential information about a property key, like its description, -Type-, -Cardinality-, -IsObligatory- and -DefaultValue-.
ARCCore.StreamProcessor.AddTimestampAsRequiredARCCoreClassMemberAdds -Timestamp- to the property stream (to -_queueReceive-) as specified by -TimestampResolution-.
ARCCore.PKTypeAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.StreamProcessor.ReadStorageFileARCCoreClassMemberReads one storage file from disk
ARCCore.PKTypeAttribute.StandardValidatorAndParserARCCoreClassMemberReturns validator and parser for well known types like string, int, long, bool, DateTime, TimeSpan, Type, Uri.
ARCCore.StorageFile.TryGetPARCCoreClassMemberMade virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway.
ARCCore.IP.TryGetV Overload2ARCCoreClassMemberThe actual value of the property. Mostly relevant for single-value properties like -PValue-.

Generated 2025-09-24 11:26:28.739 UTC