[ROOT] doc DocFrag SELECT Assembly, DocFragType, Description.FirstLine() < SKIP 23 > < TAKE 480 >
480 items
DocFragId | Assembly | DocFragType | Description.FirstLine() |
---|---|---|---|
ARCCore.IK | ARCCore | Class | IK = Interface Key / Index key. Key used to lookup 'inside' an instance of -IP-. |
ARCCore.IKCoded | ARCCore | Class | Understands coded and unencoded variants of -IK-. |
ARCCore.IKCoded.FromEncoded | ARCCore | ClassMember | Note how uses instance cache if already exists there. |
ARCCore.IKCoded.TryEncode | ARCCore | ClassMember | Returns a string containing only characters in -AllowedEncodedCharacters-. |
ARCCore.IKCoded.ToString | ARCCore | ClassMember | Returns -Encoded-'s string representation. |
ARCCore.IKCoded.Encoded | ARCCore | ClassMember | This string value can be used directly in folder names, file names and HTTP URL's without any further encoding being necessary. |
ARCCore.IKDate.ValidDateTimeFormats | ARCCore | ClassMember | Note: Be very careful about expanding this array. ToString must be considered, and also how Equals should work with other sub classes of IK. |
ARCCore.IKLong | ARCCore | Class | A more memory efficient alternative to -IKString-. |
ARCCore.IKLong.op_Equality | ARCCore | ClassMember | It is quite natural in the code to write code like "if (a.CustomerId == b.CustomerId)", therefore the need to implement == and != operators here. |
ARCCore.IKLong.EnrichKey | ARCCore | ClassMember | 'Implementing' -ITypeDescriber-. |
ARCCore.IKString.EnrichKey | ARCCore | ClassMember | 'Implementing' -ITypeDescriber-. |
ARCCore.IKType | ARCCore | Class | Index key used when storing a collection of a given type, like 'Customer'. |
ARCCore.IKType.ToString | ARCCore | ClassMember | Caching is supposed to be useful because may be called quite often. |
ARCCore.ITypeDescriber | ARCCore | Class | Provides a standardized mechanism for describing single-property values (like 'PhoneNumber' of 'Customer' for instance). |
ARCCore.PK | ARCCore | Class | PK = AgoRapide PropertyKey. |
ARCCore.PK.TryGetEnum | ARCCore | ClassMember | Note that usually you will not have to ask for this value, usually in AgoRapide it goes the other way around, you have the enum member / enum value and want the corresponding property key. |
ARCCore.PK.TryGetV | ARCCore | ClassMember | Only type of PK, string or type of __enum is allowed to ask for (as TRequest generic type parameter). |
ARCCore.PK.GetA | ARCCore | ClassMember | Convenience method for easy access to -BasePKAttribute- with corresponding explaining exception if fails |
ARCCore.PK.TryCleanValidateAndParse | ARCCore | ClassMember | Cleans and parses the value according to specifications for this property key. |
ARCCore.PK.PackParseResultForStorageInEntityObject | ARCCore | ClassMember | Packs result of parsing into a -IP--derived class, suitable for sending to -AddOrUpdateP-. |
ARCCore.PK.PackObjectForStorageInEntityObject | ARCCore | ClassMember | See -PackParseResultForStorageInEntityObject- for documentation. |
ARCCore.PK.FromEnum | ARCCore | ClassMember | Returns the corresponding -PK- instance from the given -PropertyKeyEnum-. |
ARCCore.PK.BuildFromStringCache | ARCCore | ClassMember | Builds the content of -_fromStringCache- and also -_allPKForEntityTypeCache-. |
ARCCore.PK.GetTypeMapping | ARCCore | ClassMember | Returns the relevant property key for a given type entity-type and field-type. |
ARCCore.PK.GetObligatoryValuesForEntityType | ARCCore | ClassMember | Returns all obligatory values (based on -IsObligatory-) |
ARCCore.PK.Equals | ARCCore | ClassMember | Note that ToString is only based on __enum, meaning that two enum members / enum values with same name but different type, like CustomerP.Name and OrderP.Name, will be considered equal. |
ARCCore.PK.AllEnums | ARCCore | ClassMember | All enums for the whole application. |
ARCCore.PK.AllPKEnums | ARCCore | ClassMember | All -PropertyKeyEnum--tagged enums for the whole application. |
ARCCore.PK.__enum | ARCCore | ClassMember | This information is also found as EnumMember. |
ARCCore.PKHTMLAttribute | ARCCore | Class | Contains pointer to HTML encoder for a property. |
ARCCore.PKHTMLAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
ARCCore.IHTMLEncoder | ARCCore | Class | Pseudo-interface signifying that implementing class has a static metod called 'Encode' for encoding a string to HTML. |
ARCCore.PKLogAttribute | ARCCore | Class | Explains how logging of changes to a property should be done. |
ARCCore.PKLogAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
ARCCore.PKRelAttribute.ForeignEntity | ARCCore | ClassMember | See -ForeignEntity-. |
ARCCore.PKRelAttribute.OppositeTerm | ARCCore | ClassMember | See -OppositeTerm-. |
ARCCore.PKRelAttribute.EnforceReferentialIntegrity | ARCCore | ClassMember | See -EnforceReferentialIntegrity-. |
ARCCore.PKRelAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
ARCCore.PKTypeAttribute | ARCCore | Class | Contains the most basic essential information about a property key, like its description, -Type-, -Cardinality-, -IsObligatory- and -DefaultValue-. |
ARCCore.PKTypeAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
ARCCore.PKTypeAttribute.StandardValidatorAndParser | ARCCore | ClassMember | Returns validator and parser for well known types like string, int, long, bool, DateTime, TimeSpan, Type, Uri. |
ARCCore.PKTypeAttribute.StandardCleaner | ARCCore | ClassMember | Returns a cleaner for well known types like bool |
ARCCore.BaseAttribute | ARCCore | Class | Instances of this class are used as source of documentation and data for the API. |
ARCCore.IP.Inc | ARCCore | ClassMember | Increments given property key by 1. Sets to 1 if not found. Uses long, not integer. |
ARCCore.PK.TryGetFromTypeAndFieldName Overload3 | ARCCore | ClassMember | Returns property key based on type and field name. |
ARCCore.BaseAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
ARCCore.IP.Dec | ARCCore | ClassMember | Decrements given property key by 1. Sets to -1 if not found. Uses long, not integer. |
ARCCore.PK.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
ARCCore.BaseAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
ARCCore.IP.Log | ARCCore | ClassMember | The 'final' overload of -Log- that is called by the other overloads. |
ARCCore.PK.ValidatorAndParser | ARCCore | ClassMember | Validates and parses a value. |
ARCCore.BaseAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
ARCCore.IP.LogExecuteTime | ARCCore | ClassMember | Times the execution of the given function and logs details about elapsed time. |
ARCCore.PK.Cleaner | ARCCore | ClassMember | Cleanup of values, to be used before value is attempted validated. |
ARCCore.BasePKAttribute.GetAttributes | ARCCore | ClassMember | Note that illegal to call for other than -PropertyKeyEnum-. |
ARCCore.IP.HandleException | ARCCore | ClassMember | Note that most relevant to use for -PConcurrent-. |
ARCCore.PKHTMLAttribute.Encode | ARCCore | ClassMember | Encodes the given string to HTML format through the static method implemented in class -Encoder-. |
ARCCore.BasePKAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
ARCCore.IP.TryParseDtr | ARCCore | ClassMember | Parses a PropertyStreamLine- beginning with -dtr-. |
ARCCore.PKHTMLAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
ARCCore.BasePKAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
ARCCore.IP.Initialize | ARCCore | ClassMember | Note that has a default implementation (doing nothing). |
ARCCore.PKHTMLAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
ARCCore.ClassAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
ARCCore.IP.AssertIntegrity | ARCCore | ClassMember | See -TryAssertIntegrity-. |
ARCCore.PKHTMLAttribute.Encoder | ARCCore | ClassMember | See -Encoder-. |
ARCCore.ClassAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
ARCCore.IP.TryGetPV | ARCCore | ClassMember | Gets a single property's value for the given property key. |
ARCCore.PKLogAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
ARCCore.ClassAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
ARCCore.IP.IsValid | ARCCore | ClassMember | Note that by default all properties are 'valid' but because of -NoRealDeletion-, we must have a mechanism for invalidating properties. This property returns FALSE if property has been invalidated and timestamp for invalidation is not '0001-01-01'. |
ARCCore.PKLogAttribute.DoNotLogAtAll | ARCCore | ClassMember | See -DoNotLogAtAll-. |
ARCCore.ClassMemberAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
ARCCore.IP.Item | ARCCore | ClassMember | Offers string-based direct indexing. |
ARCCore.PKLogAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
ARCCore.ClassMemberAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
ARCCore.IP.Keys | ARCCore | ClassMember | Returns all the keys for this instance. |
ARCCore.PKRelAttribute | ARCCore | Class | Describes relationships between entities (between tables in RDBMS terms). |
ARCCore.EnumAttribute.TryGetAsTypeScript | ARCCore | ClassMember | Generates typescript code corresponding to the enum which this instance describes. |
ARCCore.IP.Values | ARCCore | ClassMember | Returns all the values (all the properties) for this instance. |
ARCCore.PKRelAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
ARCCore.EnumAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
ARCCore.IP.Logger | ARCCore | ClassMember | Describes a logger. |
ARCCore.PKRelAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
ARCCore.EnumMemberAttribute.GetAttribute | ARCCore | ClassMember | Note that illegal to call for -PropertyKeyEnum-. |
ARCCore.IP.AllIPDerivedTypes | ARCCore | ClassMember | All relevant -IP--derived types for the whole application. |
ARCCore.PKTypeAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
ARCCore.EnumMemberAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
ARCCore.IP.AllIPDerivedTypesWithPKEnum | ARCCore | ClassMember | All relevant -IP--derived types for the whole application for which the also is defined a -PropertyKeyEnum-. |
ARCCore.PKTypeAttribute.Type | ARCCore | ClassMember | See -Type-. |
ARCCore.IPAttribute | ARCCore | Class | Describes -IP- classes (describes at class-level) |
ARCCore.IP.AllIPDerivedTypesDictIKType | ARCCore | ClassMember | Same as -AllIPDerivedTypesDict- except that value is -IKType-, not string. |
ARCCore.PKTypeAttribute.Cardinality | ARCCore | ClassMember | See -Cardinality-. |
ARCCore.CardinalityExtensions | ARCCore | Class | |
ARCCore.P | ARCCore | Class | 'Dummy'-class, not necessarily in use. See -PP- for more information. Created because of the concept of CorrespondingClass which is strictly enforced |
ARCCore.PKTypeAttribute.DefaultValue | ARCCore | ClassMember | See -DefaultValue-. |
ARCCore.CardinalityExtensions.IsMultiple | ARCCore | ClassMember | Returns TRUE if given cardinality implies that multiple items are stored simultaneously in a typical in-memory data storage. |
ARCCore.P.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
ARCCore.PKTypeAttribute.IsObligatory | ARCCore | ClassMember | See -IsObligatory-. |
ARCCore.Extensions | ARCCore | Class | Contains a few general nice to have extensions methods. |
ARCCore.P.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
ARCCore.PKTypeAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
ARCCore.Extensions.ToStringDB | ARCCore | ClassMember | Gives the minimum representation of type as string suitable for later reconstruction by -GetType-. |
ARCCore.P.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
ARCCore.IP | ARCCore | Class | IP = IProperty. |
ARCCore.Extensions.ForEach | ARCCore | ClassMember | Useful when we want to write collection.ForEach( ... ) instead of |
ARCCore.ICreated | ARCCore | Class | A dummy interface signifying that implementing class has the ability to store (in-memory) metadata -Created- |
ARCCore.IP.TryGetV Overload2 | ARCCore | ClassMember | The actual value of the property. Mostly relevant for single-value properties like -PValue-. |
ARCCore.Extensions.KeysAsString | ARCCore | ClassMember | Gives a compressed overview of keys in a dictionary. Helpful for building exception messages. |
ARCCore.PCollection | ARCCore | Class | A class useful for storing a collection of entities (a table in RDBMS-terms) because it implements -Indexing-. |
ARCCore.IP.TryAssertIntegrity | ARCCore | ClassMember | Asserts the integrity of this entity. |
ARCCore.Extensions.GetValue | ARCCore | ClassMember | Gives better error messages when reading value from directory if key does not exist |
ARCCore.PCollection.TrySetPP | ARCCore | ClassMember | Replaces default interface method -TrySetPP-. |
ARCCore.IP.ToString | ARCCore | ClassMember | The ToString()-implementation in the classes implementing this interface is supposed to give a short concise representation of the object for debugging and logging purposes, that is, intended for human consumption. The most 'important' implementation is probably the one in -PRich- (-ToString-) because that one is often the basis for your entity classes like 'Customer', 'Order' and so on |
ARCCore.Extensions.Result | ARCCore | ClassMember | Returns heading plus return-value of function (calls function). If function == null then empty string is returned |
ARCCore.PExact<TEnumType>.SetPVDirect | ARCCore | ClassMember | High performance alternative to -TrySetP-, accessing -Storage- more direct. |
ARCCore.IP.TryGetV Overload1 | ARCCore | ClassMember | The actual 'unpacking' of the object. |
ARCCore.Extensions.ToStringDateAndTime | ARCCore | ClassMember | Uses format 'yyyy-MM-dd HH:mm:ss.fff'. |
ARCCore.PExact<TEnumType>.GetPVDirect | ARCCore | ClassMember | High performance alternative to -TryGetP-, accessing -Storage- more direct. |
ARCCore.IP.DeepCopy | ARCCore | ClassMember | Creates a deep copy of this object instance, that is, a copy with all new object instances (except for immutable objects). |
ARCCore.Extensions.ToStringWithMS | ARCCore | ClassMember | Uses either format 'd\.hh\:mm\:ss\.fff' or 'hh\:mm\:ss\.fff' depending on TotalHours >=24 hours or not. |
ARCCore.PExact<TEnumType>.TryGetPVDirect | ARCCore | ClassMember | High performance alternative to -TryGetP-, accessing -Storage- more direct. |
ARCCore.IP.AddPV Overload2 | ARCCore | ClassMember | NOTE: The different AddPV / AddP overloads should only be used if you want an assertion against the |
ARCCore.IKIP | ARCCore | Class | Container class for key (-IK-), and value (-IP-). |
ARCCore.PExact<TEnumType>.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
ARCCore.IP.AddPV Overload1 | ARCCore | ClassMember | Adds a property value (as a -PValue-) for this objectThrows -KeyAlreadyExistsException- when relevant. |
ARCCore.IKCoded.EnrichKey | ARCCore | ClassMember | 'Implementing' -ITypeDescriber-. |
ARCCore.PExact<TEnumType>..ctor | ARCCore | ClassMember | Set capacity to the number of members in the -PropertyKeyEnum- for this class (minus the __invalid-value) |
ARCCore.IP.AddP | ARCCore | ClassMember | Adds a property for this object. |
ARCCore.IKCoded.TryCheckValidEncodedValue | ARCCore | ClassMember | Checks if encoded value is valid. |
ARCCore.PExact<TEnumType>.Storage | ARCCore | ClassMember | Uses int-value of -__enum- minus 1 as index. |
ARCCore.IP.AddOrUpdateP | ARCCore | ClassMember | Duplicates functionality of SetP. |
ARCCore.IKCoded.FromCacheEncoded | ARCCore | ClassMember | Reduces number of objects generated by caching those known to be within a limited range |
ARCCore.PII | ARCCore | Class | PII = property for storing individual items. |
ARCCore.IP.GetOrAddPV | ARCCore | ClassMember | Gets value. If not set then value will be added |
ARCCore.IKCoded.FromCacheUnencoded | ARCCore | ClassMember | Reduces number of objects generated by caching those known to be within a limited range |
ARCCore.PII.TryGetV | ARCCore | ClassMember | Since value is stored in keys, we need to override this method. |
ARCCore.IP.GetPV | ARCCore | ClassMember | Gets a single property's value for this object. Returns default value if not successful. |
ARCCore.IKCoded.AllowedEncodedCharacters | ARCCore | ClassMember | The character set 'A...Za...z0...9-_().,='. |
ARCCore.PRich.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
ARCCore.IP.AllIPDerivedTypesWithPKEnumApplicationSpecific | ARCCore | ClassMember | All relevant -IP--derived types for the -ApplicationSpecificCode- part of the application for which also is defined a -PropertyKeyEnum-. |
ARCCore.IKDate | ARCCore | Class | A more memory efficient alternative to -IKString- (together with -IKLong-). |
ARCCore.PRich.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
ARCCore.IP.AllIPDerivedEntityCollectionClassesDict | ARCCore | ClassMember | All -IP--derived types for which is found a corresponding class with name like '{EntityType}Collection' |
ARCCore.IKDate.op_Equality | ARCCore | ClassMember | It is quite natural in the code to write code like "if (a.CustomerId == b.CustomerId)", therefore the need to implement == and != operators here. |
ARCCore.PRich.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
ARCCore.IP.AllIPDerivedTypesInludingGenericAndAbstract | ARCCore | ClassMember | All relevant -IP--derived types (except the interface -IP- itself) known to the application. |
ARCCore.IKDate.EnrichKey | ARCCore | ClassMember | 'Implementing' -ITypeDescriber-. |
ARCCore.PValue<T> | ARCCore | Class | Single value storage. |
ARCCore.IP.AllIPDerivedTypesDict | ARCCore | ClassMember | Provides lookup of a type in -AllIPDerivedTypes- given its string representation. |
ARCCore.IKString | ARCCore | Class | Index key for any general id, like primary-key or sequence-number or similar. |
ARCCore.PValue<T>.TrySetP | ARCCore | ClassMember | NOTE: -TryStore- is explicit aware that -PValue- and -PValueEmpty- |
ARCCore.PCollection.GetKeysEqualToValue | ARCCore | ClassMember | Returns properties which themselves again have key and value equal to the given key and value. |
ARCCore.IKString.FromCache | ARCCore | ClassMember | Reduces number of objects generated by caching those known to be within a limited range |
ARCCore.PValue<T>.TryGetV | ARCCore | ClassMember | Supports duck typing. |
ARCCore.PCollection.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
ARCCore.IKString.FromString | ARCCore | ClassMember | Note how uses instance cache if already exists there |
ARCCore.PValue<T>.ConvertObjectToString | ARCCore | ClassMember | Converts object to string. |
ARCCore.PCollection.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
ARCCore.IKString.op_Equality | ARCCore | ClassMember | It is quite natural in the code to write code like "if (a.CustomerId == b.CustomerId)", therefore the need to implement == and != operators here. |
ARCCore.PValue<T>.ToString | ARCCore | ClassMember | Do no cache this value, because memory consumption would then increase significantly in your applicationj |
ARCCore.PCollection.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
ARCCore.ITypeDescriber.GetSyntaxHelp | ARCCore | ClassMember | Enables explanation of syntax in different contexts from one source: |
ARCCore.ActualConnection.Send | ARCCore | ClassMember | Sends all messages in queue. |
ARCCore.IGetKeysEqualToValue | ARCCore | Class | Interface stating that implementing class does not use the default implementation of -GetKeysEqualToValue- (which does not use -Indexing-) but has replaced it with a more efficient implementation assumed to utilize -Indexing-. |
ARCCore.ParseResult | ARCCore | Class | NOTE: Concept is very old, from the dark ages of AgoRapide's very first inception. There might be room for improvement. |
ARCCore.ActualConnection.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
ARCCore.PConcurrent | ARCCore | Class | A (somewhat) thread-safe alternative to -PRich- which also supports -ExposingApplicationState- (through -Logger-). |
ARCCore.ParseResult.Result | ARCCore | ClassMember | Will be null if ErrorResponse is set. |
ARCCore.ActualConnection..ctor | ARCCore | ClassMember | Note parameter-less constructor as desired for all classes inheriting -IP-. |
ARCCore.PConcurrent.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
ARCCore.ParseResult.ErrorResponse | ARCCore | ClassMember | Will be null if Result is set |
ARCCore.MonkeyWrench | ARCCore | Class | Describes level of 'spanner-throwing' this connection shall contibute with |
ARCCore.PExact<TEnumType> | ARCCore | Class | Very -MemoryConsumption- efficient alternative to -PRich-. |
ARCCore.PK.TryGetA | ARCCore | ClassMember | Convenience method for easy access to -BasePKAttribute-. |
ARCCore.ClientUpdatePosition | ARCCore | Class | Describes from WHERE (from WHEN) in the historic -PropertyStream- new data is to be returned. |
ARCCore.PII.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
ARCCore.PK.ModifyCleanerAndValidatorAndParserForCardinality | ARCCore | ClassMember | Called from -Initialize- after _cleaner and _validatorAndParser have been set. |
ARCCore.ClientUpdatePosition.Filename | ARCCore | ClassMember | Filename like '2020-04-03 08:42:22_R001' |
ARCCore.PII.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
ARCCore.PK.ToString | ARCCore | ClassMember | Caching is supposed to be useful because may be called quite often. |
ARCCore.ClientUpdatePosition.Index | ARCCore | ClassMember | Index (zero-based) into file. Value of -1 means blank update status / no data received at all (or no data received for this specific filename) |
ARCCore.IPII | ARCCore | Class | Future expansion, using different classes for storing, not only -PII-. |
ARCCore.PK.TryValidateAndParse | ARCCore | ClassMember | Parses the value according to specifications for this property key. |
ARCCore.ClientUpdatePosition.ClientDatastoreIsEmpty | ARCCore | ClassMember | Used by the subscribing client to signify that it has no data stored locally, and it therefore needs an update from the beginning of the -PropertyStream-, that is, 'from the beginning of time'. |
ARCCore.IIKII | ARCCore | Class | Related to -PII-, property for storing individual items |
ARCCore.PK.TryGetFromTypeAndFieldName Overload2 | ARCCore | ClassMember | Returns property key based on type and field name. |
ARCCore.ConnectionInstruction.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
ARCCore.IIKII.PackParseResultForStorageInIKII | ARCCore | ClassMember | This method corresponds to -PackParseResultForStorageInEntityObject-. |
ARCCore.PK.TryGetFromTypeAndFieldName Overload1 | ARCCore | ClassMember | Returns property key based on type and field name. |
ARCCore.ConnectionInstruction.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
ARCCore.IIKII.PackObjectForStorageInIKII | ARCCore | ClassMember | This method corresponds to -PackObjectForStorageInEntityObject-. |
ARCCore.PK.GetAllPKForEntityType | ARCCore | ClassMember | Returns all property keys relevant for the given entity type, |
ARCCore.Sharding | ARCCore | Class | Enables load-balancing by describing what data should be sent over a given connection. |
ARCCore.PReadOnly | ARCCore | Class | Experimental (from Feb 2022) class suitable for classes that do not need to be deserialized, or to accept write requests through -PropertyAccess-. |
ARCCore.PK.GetAllPKForEntityTypeString | ARCCore | ClassMember | Returns all property keys relevant for the given entity type, |
ARCCore.PropertyStreamLine | ARCCore | Class | Has two main functions: |
ARCCore.PRich | ARCCore | Class | Fully flexible storage. Can store anything. Typical inherited for entity representations like 'Customer' or 'Order'. |
ARCCore.PK..ctor | ARCCore | ClassMember | Constructor with 'object _enum' is necessary in order for ToString to work. |
ARCCore.PropertyStreamLine.EncodeKeys | ARCCore | ClassMember | Encodes the key part of a -PropertyStreamLine-. |
ARCCore.PValue<T>.DeepCopy | ARCCore | ClassMember | Note that if the generic type (T) is not immutable, then what we return will not be a truly deep copy. |
ARCCore.PK.Type | ARCCore | ClassMember | Returns type from -PKTypeAttribute-'s -Type-. |
ARCCore.PropertyStreamLine.EncodeValues | ARCCore | ClassMember | Typically used when turning -WholeCollection- into a value part of a -PropertyStreamLine-. |
ARCCore.PValue<T>..ctor | ARCCore | ClassMember | Note how this class does not have a parameter-less constructor (unlike all other -IP--derived classes in AgoRapide) |
ARCCore.PK.Cardinality | ARCCore | ClassMember | Returns cardinality from -PKTypeAttribute-'s -Cardinality-. |
ARCCore.PropertyStreamLine.EncodeKeyPart | ARCCore | ClassMember | Converts a single key part of a -PropertyStreamLine- to a format suitable for sending over a -PropertyStream-. |
ARCCore.PValueEmpty | ARCCore | Class | Represents the 'no value'. |
ARCCore.PK.CorrespondingClass | ARCCore | ClassMember | Returns -CorrespondingClass- based on -__enum-. |
ARCCore.PropertyStreamLine.EncodeValuePart | ARCCore | ClassMember | Converts a single value part of a -PropertyStreamLine- to a format suitable for sending over a -PropertyStream-. |
ARCCore.PValueEmpty.TrySetP | ARCCore | ClassMember | NOTE: -TryStore- is explicit aware that -PValue- and -PValueEmpty- |
ARCCore.IP.TrySetPP | ARCCore | ClassMember | SetPP = set property of property. Sets property of entity contained within this class. |
ARCCore.PropertyStreamLine.AllowedKeyChars | ARCCore | ClassMember | Allowed characters in the Key-part of a -PropertyStreamLine-. |
ARCCore.PValueEmpty.ToPropertyStream | ARCCore | ClassMember | Typicall return value could be something like |
ARCCore.IP.GetKeysEqualToValue | ARCCore | ClassMember | Returns properties which themselves again have key and value equal to the given key and value. |
ARCCore.PropertyStreamLine.AllowedValueChars | ARCCore | ClassMember | Allowed characters in the Value-part of a -PropertyStreamLine-. |
ARCCore.ActualConnection | ARCCore | Class | The actual connection, its internal state, queue for sending and so on. |
ARCCore.IP.OnTrySetP | ARCCore | ClassMember | Event handler to be called by -TrySetP- before it changes a property value (but AFTER it has done any validity checks, that is, after it has 'decided' to return TRUE, in other words, event handler should be called when change is guaranteed to go through, but before it actually has been done). |
ARCCore.PropertyStreamLineParsed | ARCCore | Class | Parses the keys part of a line from -PropertyStream-, like 'Customer/42/FirstName = John. |
ARCCore.ActualConnection.SetMyUpdatePositionGenerator | ARCCore | ClassMember | Set by -StreamProcessor-. |
ARCCore.IP.TryGetP | ARCCore | ClassMember | Gets a single property for this object |
ARCCore.PropertyStreamLineParsed.ToString | ARCCore | ClassMember | Note relatively complex operation of 'restoring' original property stream line. |
ARCCore.ActualConnection.SetSinglePropertyStreamReceiver | ARCCore | ClassMember | Set by -StreamProcessor-. |
ARCCore.IP.ToPropertyStream | ARCCore | ClassMember | Turns object into a -PropertyStream- |
ARCCore.PropertyStreamLineParsed.TryParse | ARCCore | ClassMember | Generate list of <(IK key, Type valueType)> together with value from value part. |
ARCCore.ActualConnection.SetUpToDatePositionGenerator | ARCCore | ClassMember | Set by -StreamProcessor-. Not used by -Client-. |
ARCCore.IP.ToJSONSerializeable | ARCCore | ClassMember | Prepares the data into a format acceptable for System.Text.Json.JsonSerializer.Serialize. |
ARCCore.PropertyStreamLineParsed.IsComment | ARCCore | ClassMember | Signifies that property stream line given for parsing started with '//' (two forward slashes). |
ARCCore.ActualConnection.InitializeOutgoingConnection | ARCCore | ClassMember | Relevant for -Outgoing-. |
ARCCore.IP.GetValueForJSONSerializer | ARCCore | ClassMember | Practical approach to serializing of -IP- based values to JSON. |
ARCCore.PropertyStreamLineParsed.Keys | ARCCore | ClassMember | The keys part of the -PropertyStreamLine-, that is, everything before ' = '. |
ARCCore.ActualConnection.Communicate | ARCCore | ClassMember | Common for both -Incoming- and -Outgoing-. |
ARCCore.IP.TrySetP | ARCCore | ClassMember | Set property regardless of whether exists or not. |
ARCCore.PropertyStreamLineParsed.Value | ARCCore | ClassMember | The original (non-parsed, non-validated)) value part of the -PropertyStreamLine-, that is, everything after ' = '. |
ARCCore.ActualConnection.LogAndSendErrorConditionData | ARCCore | ClassMember | Called when a serious error condition has been discovered and connection should be terminated. |
ARCCore.StreamProcessor+StorageFile.Length | ARCCore | ClassMember | Wrongly placed. Belongs to each individual revision file. |
ARCCore.StreamProcessor | ARCCore | Class | Implements the storage mechanism for AgoRapide. |
ARCCore.ClientUpdatePosition.OnlyNewDataIsRequested | ARCCore | ClassMember | Used by the subscribing client to signify that it does not care about historical data, the server may start with sending only new data. |
ARCCore.StreamProcessor+StorageFile.Properties | ARCCore | ClassMember | Key = revision number of file (due to compression / -DataRetention-), like R00001, R00002 and so on. |
ARCCore.StreamProcessor.CreateBareBonesInstance | ARCCore | ClassMember | Creates a bare-bones -StreamProcessor- instance. |
ARCCore.ClientUpdatePosition.IsGoBack | ARCCore | ClassMember | Has to be translated by -StreamProcessor- into a concrete filename / index. |
ARCCore.BaseAttributeP | ARCCore | Enum | Describes class -BaseAttribute-. |
ARCCore.StreamProcessor.Initialize | ARCCore | ClassMember | Initializes this instance of -StreamProcessor- |
ARCCore.ClientUpdatePosition.IsAtEndOfStream | ARCCore | ClassMember | Necessary in order to implement -AdHocQuery-. |
ARCCore.BaseAttributeP.Description | ARCCore | EnumMember | The description for the attribute, like this description |
ARCCore.StreamProcessor.AddOrRemoveOutgoingConnections | ARCCore | ClassMember | Not relevant for -CoreDB-. |
ARCCore.ClientUpdatePosition.ClientDatastoreIsEmptyInstance | ARCCore | ClassMember | See also -ClientDatastoreIsEmpty. |
ARCCore.BaseAttributeP.LongDescription | ARCCore | EnumMember | The long (detailed) description for the attribute. |
ARCCore.StreamProcessor.StartTCPIPCommunication | ARCCore | ClassMember | Starts communicating over TCP/IP. |
ARCCore.ClientUpdatePosition.OnlyNewDataIsRequestedInstance | ARCCore | ClassMember | See also -OnlyNewDataIsRequested. |
ARCCore.ClassAttributeP | ARCCore | Enum | Describes class -ClassAttribute-. |
ARCCore.StreamProcessor.ReceiveAndDistribute | ARCCore | ClassMember | Process all messages in receive queue. |
ARCCore.ConnectionInstruction | ARCCore | Class | The instruction about what connections to make (host, portnr, data transfer direction and so on). |
ARCCore.ClassAttributeP.AssemblyName | ARCCore | EnumMember | The assembly in which this class resides. |
ARCCore.StreamProcessor.AddTimestampAsRequired | ARCCore | ClassMember | Adds -Timestamp- to the property stream (to -_queueReceive-) as specified by -TimestampResolution-. |
ARCCore.ConnectionInstruction.Initialize | ARCCore | ClassMember | Initializes to sane values. |
ARCCore.ClassAttributeP.ClassNamespace | ARCCore | EnumMember | The namespace for -ClassType-. |
ARCCore.StreamProcessor.ReadStorageFile | ARCCore | ClassMember | Reads one storage file from disk |
ARCCore.ConnectionInstruction.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
ARCCore.ClassAttributeP.ClassType | ARCCore | EnumMember | The actual type that we are a -ClassAttribute- for |
ARCCore.Subscription.SyntaxHelp | ARCCore | ClassMember | '+*' Subscribe to everything in database. |
ARCCore.PropertyStreamLine.Decode | ARCCore | ClassMember | Decodes string as encoded by -EncodeKeyPart- or -EncodeValuePart-. |
ARCCore.ClassAttributeP.BaseTypes | ARCCore | EnumMember | The inheritance hierarchy for this class, starting with base type (excluding 'object').r Not set if class does not inherit any class except 'object' |
ARCCore.Subscription.IsAdd | ARCCore | ClassMember | Corresponds to whether value starts with a plus sign, '+' or not. |
ARCCore.PropertyStreamLine.TryParseDirectToIP | ARCCore | ClassMember | Parses a series of -PropertyStreamLine- directly to the given type of -IP-. |
ARCCore.ClassAttributeP.SubTypes | ARCCore | EnumMember | Direct and indirect sub types of this class. |
ARCCore.Subscription.IsRemove | ARCCore | ClassMember | Corresponds to whether value starts with a minus sign, '+' or not. |
ARCCore.PropertyStreamLine.TryParseDirectToProperty | ARCCore | ClassMember | Parses direct to a given property value. |
ARCCore.ClassAttributeP.Interfaces | ARCCore | EnumMember | All interfaces that this class and its base classes implement |
ARCCore.UtilCore | ARCCore | Class | Utility methods for -ARCCore-. |
ARCCore.PropertyStreamLine.ParseAndStore | ARCCore | ClassMember | Note that throws exception if -TryParseAndStore- fails. |
ARCCore.ClassAttributeP.InterfacesDirectlyImplemented | ARCCore | EnumMember | All interfaces that this class directly implements. |
ARCCore.UtilCore.AssertCurrentlyStartingUp | ARCCore | ClassMember | Normally called from non-thread safe methods that should be run single-threaded at application startup only. |
ARCCore.PropertyStreamLine.ParseAndStoreFailSafe | ARCCore | ClassMember | If either parsing or storing fails then this method will call -StoreFailure- in order to keep some track of why parsing or storing failed. |
ARCCore.ClassAttributeP.CorrespondingEnumType | ARCCore | EnumMember | Only relevant when implements -IP-. |
ARCCore.UtilCore.DoubleTryParse | ARCCore | ClassMember | Note that treats ',' (comma) as decimal point (not as thousands separator). |
ARCCore.PropertyStreamLine.StoreFailSafe | ARCCore | ClassMember | Stores if possible and fails silently. |
ARCCore.ClassAttributeP.BoilerplateCodePropertiesAndStorage | ARCCore | EnumMember | Only relevant when implements -IP- and when a -CorrespondingEnumType- is found. |
ARCCore.UtilCore.EnumTryParse | ARCCore | ClassMember | Same as the inbuilt .NET method -TryParse- but with some additional checks. |
ARCCore.PropertyStreamLine.StoreFailure | ARCCore | ClassMember | Stores a 'ParseOrStoreFailure'-object. |
ARCCore.ClassMemberAttributeP | ARCCore | Enum | Describes class -ClassMemberAttribute-. |
ARCCore.UtilCore.TryGetTypeFromStringNoCache | ARCCore | ClassMember | See -TryGetTypeFromStringFromCache- for documentation. |
ARCCore.PropertyStreamLine.TryStore | ARCCore | ClassMember | Stores the given -PropertyStreamLineParsed- in the given storage object. |
ARCCore.ARComponents.ARCDoc | ARCCore | EnumMember | A library supporting documentation and demonstrating usage of AgoRapide. |
ARCCore.UtilCore.TryGetTypeFromStringFromCache | ARCCore | ClassMember | Corresponding method for creating string-representation of type is -ToStringDB-. |
ARCCore.StreamProcessor.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
ARCCore.ARComponents.ARCQuery | ARCCore | EnumMember | ARCQuery provides a query language that mimicks SQL but is usable through HTTP as GET URLs. |
ARCCore.UtilCore.GetExceptionChainAsString | ARCCore | ClassMember | Follows the chain of InnerException and returns types as comma-separated string |
ARCCore.StreamProcessor.OutsideLocalReceiver | ARCCore | ClassMember | The outside (in the sense outside of this class) local mechanism which receives all -PropertyStreamLine- registered by this class. |
ARCCore.ARComponents.ARCEvent | ARCCore | EnumMember | ARCEvent contains an -EventSourcing- engine offering a unique -PropertyStream2D- concept where processes (of some business domain) can be expressed in very compact manner through the concept of -IRegHandler-. |
ARCCore.UtilCore.GetExeptionDetails | ARCCore | ClassMember | Gives as much information about exception as possible. |
ARCCore.PropertyStreamLineWithOrigin | ARCCore | Class | The rationale for this class is that -ReceiveAndDistribute- needs to distingush origin of data when routing it (in general, in order to avoid sending it back to its source). |
ARCCore.ARComponents.ARCSync | ARCCore | EnumMember | (Not implemented as of March 2020) |
ARCCore.UtilCore.DateTimeTryParse | ARCCore | ClassMember | Accepts on of the formats specified in -ValidDateTimeFormats-. |
ARCCore.PropertyStreamLineWithOrigin.HasLocalOrigin | ARCCore | ClassMember | Locally generated data is not to be sent to -OutsideLocalReceiver-). We instead leave it to the 'outside' to decide if |
ARCCore.ARComponents.ARCSec | ARCCore | EnumMember | (Not implemented as of March 2020) |
ARCCore.UtilCore.TimeSpanTryParse | ARCCore | ClassMember | Accepts on of the formats specified in -ValidDateTimeFormats-. |
ARCCore.PropertyStreamLineWithOrigin.SendToLocalReceiver | ARCCore | ClassMember | Means 'send to local receiver regardless of origin'. |
ARCCore.ARComponents.ARCAPI | ARCCore | EnumMember | A library providing an API on top of the -PropertyStream-. |
ARCCore.UtilCore.UseLocalTimeInsteadOfUTC | ARCCore | ClassMember | By default AgoRapide operates only with UTC time. |
ARCCore.PropertyStreamLineWithOrigin.DoNotAddTimestamp | ARCCore | ClassMember | Normally -StreamProcessor- inserts the required -Timestamp-s in the AgoRapide storage. |
ARCCore.ARComponents.ARAAPI | ARCCore | EnumMember | The corresponding template application for -ARCAPI- demonstrating its usage, providing an HTTP / HTTPS interface with the help of Microsoft.AspNetCore.Mvc. |
ARCCore.UtilCore.DateTimeNow | ARCCore | ClassMember | Returns DateTime.UtcNow unless -UseLocalTimeInsteadOfUTC- has been set to TRUE in which case DateTime.Now is returned. |
ARCCore.PropertyStreamLineWithOrigin.ReceivedFromOutgoing | ARCCore | ClassMember | Data received from an outgoing connection, that is, data received based on 'this' application's subscription request (as subscribing client). |
ARCCore.ARConcepts | ARCCore | Enum | The overarching concepts upon which AgoRapide is built. |
ARCCore.UtilCore.CurrentlyStartingUp | ARCCore | ClassMember | Called once at application startup after all Attribute instances in the C# code has been processed. |
ARCCore.StorageFile | ARCCore | Class | Implemented only in order to store some ideas about -Hash-. |
ARCCore.ARConcepts.LinkInsertionInDocumentation | ARCCore | EnumMember | Documentation with links is much easier to read. |
ARCCore.REx.Dec | ARCCore | ClassMember | This method should be called from inside a 'finally' block, in order to secure its execution, if not then your static recursion depth counter could slowly increase over time due to exceptions ocurring after call to -Inc- but before call to -Dec-. |
ARCCore.StorageFile.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
ARCCore.ARConcepts.TryPatternAndNull | ARCCore | EnumMember | AgoRapide uses non-nullable reference types as default throughout the system |
ARCCore.InvalidTypeException | ARCCore | Class | |
ARCCore.StorageFile.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
ARCCore.AREnumType | ARCCore | Enum | Categories different types of enum used in AgoRapide. The most important one is -PropertyKeyEnum-. |
ARCCore.InvalidTypeException.AssertAssignable | ARCCore | ClassMember | Asserts that expectedType.IsAssignableFrom(foundType) |
ARCCore.StorageFile.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
ARCCore.AREnumType.PropertyKeyEnum | ARCCore | EnumMember | Designates enums that describe relevant values for an 'entity' object like 'Customer'. |
ARCCore.InvalidTypeException.AssertEquals | ARCCore | ClassMember | Asserts that expectedType.Equals(foundType) |
ARCCore.Subscription | ARCCore | Class | A stream -Subscription- is the concept of how nodes (see -ARNodeType-) subscribe to the -PropertyStream- (either the whole stream or just part of it) in a distributed manner. |
ARCCore.AREnumType.OrdinaryEnum | ARCCore | EnumMember | Designates "Ordinary" enums used for indicating range of valid values for a given key |
ARCCore.TValue | ARCCore | Class | Placeholder for any class type suitable as generic type parameter -PValue-. |
ARCCore.Subscription.FromTime | ARCCore | ClassMember | TODO: Implement concept of specifying starting-point in TIME (often for an -AdHocQuery-?). |
ARCCore.AREnumType.DocumentationOnlyEnum | ARCCore | EnumMember | Designates enums that provide a central repository of explanation of terms that are not present in the C# code. |
ARCCore.TIP | ARCCore | Class | Placeholder for any class type suitable as generic type parameter restricted to -IP. |
ARCCore.Subscription.ToTime | ARCCore | ClassMember | TODO: Implement concept of specifying ending-point in TIME (often for an -AdHocQuery-?). |
ARCCore.ARNodeType | ARCCore | Enum | Describes what function a node in an AgoRapide system serves. A given node may constitute of only -StandardAgoRapideCode- or a combination of -StandardAgoRapideCode- and -ApplicationSpecificCode-. |
ARCCore.TIP.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
ARCCore.Subscription.IsMatch Overload1 | ARCCore | ClassMember | Evaluates a query consisting of multiple instances of -Subscription- against a single property stream line. |
ARCCore.ARNodeType.CoreDB | ARCCore | EnumMember | A node containing the core or central database. |
ARCCore.TIP.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
ARCCore.Subscription.IsMatch Overload2 | ARCCore | ClassMember | Evaluates this instance of -Subscription- against a single property stream line (which has been split up into its constituent elements). |
ARCCore.PSPrefix.dtr | ARCCore | EnumMember | Data, whole records. |
ARCCore.TIP.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
ARCCore.UtilCore.Assemblies | ARCCore | ClassMember | All relevant assemblies for application. |
ARCCore.PSPrefix.RS | ARCCore | EnumMember | RS = Registration Stream (see -RegStream-). |
ARCCore.BaseAttribute+IncorrectAttributeTypeUsedException | ARCCore | Class | Helps to clean up any confusion about which -BaseAttribute- to use in a given concept. |
ARCCore.UtilCore.Culture | ARCCore | ClassMember | The general culture used for parsing. |
ARCCore.PSPrefix.ES | ARCCore | EnumMember | ES = Event Stream (see -EventStream-). |
ARCCore.PK+BasePKAttributeNotFoundException<T> | ARCCore | Class | Explains how to implement a given -BasePKAttribute- for an enum |
ARCCore.UtilCore.Culture_en_US | ARCCore | ClassMember | Used by -DoubleTryParse-. |
ARCCore.PSPrefix.cmd | ARCCore | EnumMember | Command. |
ARCCore.PK+PKBoolPair | ARCCore | Class | Used to signify that a given -PK- returned from value factory inside -FromEnum- has not been initialized (has not yet been populated with -PKTypeAttribute- collection). |
ARCCore.UtilCore.DefaultAgoRapideEncoding | ARCCore | ClassMember | The standard encoding used for text (UTF8). |
ARCCore.PSPrefix.app | ARCCore | EnumMember | Application state, like app/ |
ARCCore.PK+PKBoolPair.TrulyInitialized | ARCCore | ClassMember | Not used currently (May 2020). Useful for debugging purposes |
ARCCore.UtilCore.ValidDateTimeFormats | ARCCore | ClassMember | 'yyyy-MM-dd HH:mm:ss.fff', 'yyyy-MM-dd HH:mm:ss', 'yyyy-MM-dd HH:mm', 'yyyy-MM-dd' |
ARCCore.PSPrefix.doc | ARCCore | EnumMember | Documentation. |
ARCCore.StreamProcessor+StorageFile | ARCCore | Class | |
ARCCore.UtilCore.ValidTimeSpanFormats | ARCCore | ClassMember | 'hh\:mm', 'hh\:mm\:ss', 'd\.hh\:mm\:ss', 'hh\:mm\:ss\.fff' // Milliseconds,'d\.hh\:mm\:ss\.fff' |
ARCCore.PSPrefix.t | ARCCore | EnumMember | Translations. |
ARCCore.StreamProcessor+StorageFile.Filepath | ARCCore | ClassMember | Complete path to file |
ARCCore.REx | ARCCore | Class | REx = 'TooDeepRecursiveDepthException' |
ARCCore.PKHTMLAttributeP | ARCCore | Enum | Describes class -PKRelAttribute-. |
ARCCore.StreamProcessor+StorageFile.Filename | ARCCore | ClassMember | Filename: Main file name, like 2020-04-03 08:42 |
ARCCore.REx.Inc | ARCCore | ClassMember | Increases recursive count. |
ARCCore.PKHTMLAttributeP.Encoder | ARCCore | EnumMember | The class doing the HTML-encoding. |
ARCCore.ClassMemberAttributeP.DeclaringType | ARCCore | EnumMember | The actual MemberInfo.DeclaringType. |
ARCCore.ARConcepts.GettingStarted | ARCCore | EnumMember | AgoRapide 2020 is an open source library for building data-oriented backend applications using .NET. |
ARCCore.PKLogAttributeP | ARCCore | Enum | Describes class -PKLogAttribute. |
ARCCore.ClassMemberAttributeP.MethodName | ARCCore | EnumMember | The actual MemberInfo.Name. |
ARCCore.ARConcepts.PropertyStream | ARCCore | EnumMember | AgoRapide, the 'streams-of-water' database". |
ARCCore.PKLogAttributeP.DoNotLogAtAll | ARCCore | EnumMember | Originates from -DoNotLogAtAll-. |
ARCCore.ClassMemberAttributeP.MethodSignature | ARCCore | EnumMember | The actual MemberInfo.ToString. |
ARCCore.ARConcepts.PropertyStream2D | ARCCore | EnumMember | PropertyStream2D is an expansion of the -PropertyStream- concept supported by the library -ARCEvent-. |
ARCCore.PKLogAttributeP.CountInterval | ARCCore | EnumMember | For a value of n, log only every n'th time the property is changed. |
ARCCore.EnumAttributeP | ARCCore | Enum | Describes class -EnumAttribute-. |
ARCCore.ARConcepts.EventSourcing | ARCCore | EnumMember | (related to -ARCEvent-). |
ARCCore.PKLogAttributeP.TimeInterval | ARCCore | EnumMember | Specifies a certain time interval for which the property's value shall be sent over the -PropertyStream-. |
ARCCore.EnumAttributeP.AssemblyName | ARCCore | EnumMember | The assembly in which this class resides. |
ARCCore.ARConcepts.RegStream | ARCCore | EnumMember | The concept in -ARCEvent- of an "axis" (usefully referred to as the vertical axis) within the concept of -PropertyStream2D-. |
ARCCore.PKRelAttributeP | ARCCore | Enum | Describes class -PKRelAttribute-. |
ARCCore.EnumAttributeP.EnumNamespace | ARCCore | EnumMember | The namespace for -EnumType-. |
ARCCore.ARConcepts.EventStream | ARCCore | EnumMember | The concept in -ARCEvent- of an "axis" (usefully referred to as the horizontal axis) within the concept of -PropertyStream2D-. |
ARCCore.PKRelAttributeP.ForeignEntity | ARCCore | EnumMember | The type of foreign entity that this property points to. |
ARCCore.EnumAttributeP.EnumType | ARCCore | EnumMember | The type of the enum (like type of 'CustomerP' in CustomerP.FirstName) that we are an attribute for |
ARCCore.ARConcepts.TransientEventTree | ARCCore | EnumMember | The concept in -ARCEvent- of how an -Event- in the -EventStream- generates transient events which in turn may generate |
ARCCore.PKRelAttributeP.OppositeTerm | ARCCore | EnumMember | Example: For 'Employee', the key 'SupervisorId' where the supervisor is another 'Employee', will have another meaning "as seen from" the Supervisor, namely "Subordinates" or similar. |
ARCCore.EnumAttributeP.AREnumType | ARCCore | EnumMember | Note that will default to -__invalid- if not explicit set. |
ARCCore.ARConcepts.TaggingOfPropertyKeys | ARCCore | EnumMember | The concept of specifying in a single place all relevant information about a given property (data field). |
ARCCore.ConnectionInstructionP | ARCCore | Enum | Describes class -ConnectionInstruction-. |
ARCCore.EnumAttributeP.CorrespondingClass | ARCCore | EnumMember | Only relevant when -PropertyKeyEnum-. |
ARCCore.ARNodeType.ArmDB | ARCCore | EnumMember | A node with a 'client -Subscription-' towards -CoreDB- to a (usually) subset of the entire database (acting as a cache and filtering mechanism), or with a 'client -Subscription-' towards -CoreDB- to the whole database (acting as a cache mechanism only) |
ARCCore.ConnectionInstructionP.ClientId | ARCCore | EnumMember | The AgoRapide node-id for which this connection is relevant. Used for distributing over the -PropertyStream- information to the clients about which possible nodes they can connect to. |
ARCCore.EnumMemberAttributeP | ARCCore | Enum | Describes class -EnumMemberAttribute-. |
ARCCore.ARNodeType.Client | ARCCore | EnumMember | An outer node / 'end' node with (usually) -ApplicationSpecificCode- but based on -ARADB-. |
ARCCore.ConnectionInstructionP.ServerHostName | ARCCore | EnumMember | The host (DNS or IP-address) for which to connect. |
ARCCore.EnumMemberAttributeP.EnumType | ARCCore | EnumMember | The type of the enum (like type of 'CustomerP' in CustomerP.FirstName) that we are an attribute for |
ARCCore.Cardinality | ARCCore | Enum | Describes how multiple instances of a property is supposed to be handled. |
ARCCore.ConnectionInstructionP.ServerPortNo | ARCCore | EnumMember | The port number for which to connect. |
ARCCore.EnumMemberAttributeP.EnumMember | ARCCore | EnumMember | The actual enum member / enum value (like 'Firstname' in CustomerP.FirstName) that we are an attribute for |
ARCCore.Cardinality.HistoryOnly | ARCCore | EnumMember | The default value. |
ARCCore.ConnectionInstructionP.ConnectionId | ARCCore | EnumMember | Usually a combination of -ClientId-, -ServerHostName- and -ServerPortNo-. |
ARCCore.ARComponents | ARCCore | Enum | ARComponents = AgoRapide Components. Contains short descriptions of the different 'official' AgoRapide components. |
ARCCore.Cardinality.WholeCollection | ARCCore | EnumMember | Values are always set as a whole (there is no need or no meaning in setting or deleting individual items) |
ARCCore.ConnectionInstructionP.DataTransferDirection | ARCCore | EnumMember | |
ARCCore.ARComponents.ARCCore | ARCCore | EnumMember | A necessary library (.DLL in Windows terms) that every -ARNodeType- should link to. |
ARCCore.Cardinality.IndividualItems | ARCCore | EnumMember | Values are supposed to be set and 'deleted' individually. |
ARCCore.ConnectionInstructionP.Subscription | ARCCore | EnumMember | The actual subscripton. This is what the connecting party / (downstream) client would send over its TCP/IP connection to the (upstream) server. |
ARCCore.ARComponents.ARADB | ARCCore | EnumMember | An application constituting the full functionality of a -CoreDB- (linking to -ARCCore-). |
ARCCore.PSPrefix | ARCCore | Enum | Describes some recommended prefixes to use in a -PropertyStreamLine-. |
ARCCore.ConnectionInstructionP.MultipleConnectionUsage | ARCCore | EnumMember | |
ARCCore.ARComponents.ARAClient | ARCCore | EnumMember | A template application for a -Client- (linking to -ARCCore-). |
ARCCore.PSPrefix.dt | ARCCore | EnumMember | Data, single key + value. |
ARCCore.StreamProcessorP.TimestampResolution | ARCCore | EnumMember | The time interval between each timestamp update in the -PropertyStream-. |
ARCCore.ARConcepts.PropertyAccess | ARCCore | EnumMember | The general mechanism for accessing properties of objects in AgoRapide. |
ARCCore.PKRelAttributeP.EnforceReferentialIntegrity | ARCCore | EnumMember | If TRUE then referential integrity will be enforced by -TryStore-. |
ARCCore.StreamProcessorP.DoNotStoreLocally | ARCCore | EnumMember | For -Client-, incoming data (as received from a -Outgoing-) is possible to store BOTH to disk, AND to (normally) a -PRich-. |
ARCCore.ARConcepts.AvoidingRepetition | ARCCore | EnumMember | Avoiding repetition, the overarching philosophy that inspired the rest of AgoRapide. |
ARCCore.PKTypeAttributeP | ARCCore | Enum | Describes class -PKTypeAttribute-. |
ARCCore.StreamProcessorP.DoNotStoreLocalOriginLocally | ARCCore | EnumMember | Means 'do not store local origin locally but wait until it gets confirmed by core storage'. |
ARCCore.ARConcepts.AgoRapideHistory | ARCCore | EnumMember | AgoRapide has roots back to 2011 when Bjørn Erling Fløtten invented panSL (SL = Schema language). |
ARCCore.PKTypeAttributeP.Type | ARCCore | EnumMember | The type of this Property. |
ARCCore.StreamProcessorP.CacheDiskWrites | ARCCore | EnumMember | If TRUE then will write the -PropertyStream- to disk in bigger chunks, thereby increasing performance. |
ARCCore.ARConcepts.AdHocQuery | ARCCore | EnumMember | The concept of a -Client- doing an ad-hoc query against (normally) a -ArmDB-. |
ARCCore.PKTypeAttributeP.DefaultValue | ARCCore | EnumMember | The default value. |
ARCCore.StreamProcessorP.CopyFileStructureFromCore | ARCCore | EnumMember | If TRUE, will copy the exact file structure (through information given in -ClientUpdatePosition-). |
ARCCore.ARConcepts.StandardAgoRapideCode | ARCCore | EnumMember | Code originating from the main official AgoRapide distribution (which therefore does not include any end-application specific code) |
ARCCore.PKTypeAttributeP.Cardinality | ARCCore | EnumMember | Describes how multiple instances of a property is supposed to be handled. |
ARCCore.StreamProcessorP.CountIncomingConnections | ARCCore | EnumMember | |
ARCCore.ARConcepts.ApplicationSpecificCode | ARCCore | EnumMember | Code specific for an end-application. |
ARCCore.PKTypeAttributeP.IsObligatory | ARCCore | EnumMember | True means value is obligatory. |
ARCCore.StreamProcessorP.CountOutgoingConnections | ARCCore | EnumMember | |
ARCCore.ARConcepts.MemoryConsumption | ARCCore | EnumMember | A naïve implementation of key-value storages like AgoRapide may lead to excessive memory (RAM) consumption. |
ARCCore.PKTypeAttributeP.BoilerplateCodeProperties | ARCCore | EnumMember | Automatically generated boilerplate code that implements traditional setters and getters for this key. |
ARCCore.StreamProcessorP.CountOutsideLocalReceiver | ARCCore | EnumMember | Count of calls to -OutsideLocalReceiver-. |
ARCCore.ARConcepts.Indexing | ARCCore | EnumMember | In-memory indexing of data is done 'behind-the-scenes' by some classes implementing -IP-. |
ARCCore.PP | ARCCore | Enum | Describes meta data for any class (property) implementing -IP-. |
ARCCore.ARConcepts.CoreDBSynchronization | ARCCore | EnumMember | The concept of how multiple -CoreDB- instances synchronizes their data. |
ARCCore.ARConcepts.SingleThreadedCode | ARCCore | EnumMember | Some practical choices have been made in AgoRapide which requires object access to be done in a single-threaded manner, or within a locking context (using for instance -ReaderWriterLockSlim-). |
ARCCore.ARConcepts.DataRetention | ARCCore | EnumMember | The concept of when to delete old data (if deemed necessary). |
ARCCore.ARConcepts.NoRealDeletion | ARCCore | EnumMember | AgoRapide has no real concept for deletion of data (apart from -DataRetention-, which is mostly relevant for 'old' data). |
ARCCore.ARConcepts.ManyToManyRelations | ARCCore | EnumMember | -ARCQuery- supports many-to-many relations in a simple manner without introducing a third entity type (a third table). |
ARCCore.ARConcepts.Documentation | ARCCore | EnumMember | Thanks to the tagging of enums and classes in AgoRapide (like this description), automatically generation of documentation is possible. |
ARCCore.ARConcepts.AssertionsAndDetailedExceptionMessages | ARCCore | EnumMember | The abstraction level in AgoRapide is very high. |
ARCCore.ARConcepts.ExposingApplicationState | ARCCore | EnumMember | The traditional debugging process usually entails reading through logs and querying about your application state through a debugging tool. |
ARCCore.PConcurrentP | ARCCore | Enum | Describes class -PConcurrent-. |
ARCCore.PConcurrentP.Heartbeat | ARCCore | EnumMember | |
ARCCore.ActualConnectionP | ARCCore | Enum | Describes class -ActualConnection-. |
ARCCore.ActualConnectionP.Id | ARCCore | EnumMember | When connection is used with-StreamProcessor-, the Id should be the same as the key used in the incoming / outgoing connection dictionary collection. |
ARCCore.ActualConnectionP.ConnectionInstruction | ARCCore | EnumMember | Only relevant when we are an -Outgoing-. |
ARCCore.ActualConnectionP.ConnectionDirection | ARCCore | EnumMember | |
ARCCore.ActualConnectionP.CountReceiveMessage | ARCCore | EnumMember | |
ARCCore.ActualConnectionP.CountSendMessage | ARCCore | EnumMember | |
ARCCore.ActualConnectionP.ClientUpdatePosition | ARCCore | EnumMember | Note how this is stored both as -ClientUpdatePosition- (on the client side) and -ClientUpdatePosition- (on the server side). |
ARCCore.ActualConnectionP.SubscriptionAsRequestedByClient | ARCCore | EnumMember | Originates from -Subscription-. |
ARCCore.ActualConnectionP.ClosingReason | ARCCore | EnumMember | Reason why this connection was closed |
ARCCore.ActualConnectionP.IsErrorCondition | ARCCore | EnumMember | Some kind of error condition has occured regarding data going back and forth, but the TCP/IP connection itself is probably sound. |
ARCCore.ActualConnectionP.ErrorConditionData | ARCCore | EnumMember | Detailed explanation about -IsErrorCondition- |
ARCCore.ActualConnectionP.UnderClosure | ARCCore | EnumMember | Set to TRUE if to be closed and reinitialized. |
ARCCore.ActualConnectionP.MonkeyWrench | ARCCore | EnumMember | |
ARCCore.ActualConnectionP.PartnerIPAddress | ARCCore | EnumMember | TODO: Use more strongly typing for this. |
ARCCore.ConnectionInstructionP.Sharding | ARCCore | EnumMember | |
ARCCore.MultipleConnectionUsage | ARCCore | Enum | Enables fault-tolerance by describing use of multiple connections |
ARCCore.MultipleConnectionUsage.Admin | ARCCore | EnumMember | Connection is a special administrative connection to a central 'command-and-control' server which instructs which connections to make. |
ARCCore.MultipleConnectionUsage.RoundRobin | ARCCore | EnumMember | This connection to be used in a turn based system, together with other connections with -RoundRobin-. |
ARCCore.MultipleConnectionUsage.Simultaneous | ARCCore | EnumMember | This connection to be used simultaneously with other connections with -Simultaneous- |
ARCCore.StreamProcessorP | ARCCore | Enum | Describes class -StreamProcessor-. |
ARCCore.StreamProcessorP.LocalStorageFolder | ARCCore | EnumMember | The local path to which new properties are stored. Should NOT end with any trailing DirectorySeparatorChar |
ARCCore.StreamProcessorP.IndividualStorageFileSize | ARCCore | EnumMember | Max size (in bytes) for a single storage file before a new file is created by call to -StreamProcessor.CreateNewStorageFile-. |
ARCCore.StreamProcessorP.CurrentlyInitializing | ARCCore | EnumMember | Set to TRUE at initialization (signals for instance -ReceiveAndDistribute- that it can only queue messages, not process them). |
ARCCore.StreamProcessorP.ClientUpdatePositionPath | ARCCore | EnumMember | Complete path to file containing -ClientUpdatePosition-. |
ARCCore.StreamProcessorP.ClientUpdatePosition | ARCCore | EnumMember | Note how this is stored both as -ClientUpdatePosition- (on the client side) and -ClientUpdatePosition- (on the server side). |
ARCCore.StreamProcessorP.IncomingConnectionsPortNo | ARCCore | EnumMember | If not set, then class will not listen for incoming connections (meaning that our application is probably a -Client-). |
ARCCore.StreamProcessorP.UnderClosure | ARCCore | EnumMember | Set to TRUE if to be closed, whenever an exception occurs or when class goes out of scope |
ARCCore.StreamProcessorP.WriteToConsole | ARCCore | EnumMember | If true then incoming data (from other nodes will be written to console. |
ARCCore.StreamProcessorP.Timestamp | ARCCore | EnumMember | The timestamp inserted at regular intervals in the -PropertyStream- according to -TimestampResolution-. |
ARCCore.StreamProcessorP.TimestampIsOld | ARCCore | EnumMember | A warning sent by -StreamProcessor- to -OutsideLocalReceiver- when it knows that data as served is out of date. |
ARCDoc.Orange.Storage | ARCDoc | ClassMember | Uses int-value of -__enum- minus 1 as index. |
ARCDoc.SomeAppComponent | ARCDoc | Class | Demonstrates how also your actual application classes, not only your data classes, should implement -IP-. |
ARCDoc.SomeAppComponent.MethodC | ARCDoc | ClassMember | Note structured format in logging. |
ARCDoc.SomeAppComponent.MethodD | ARCDoc | ClassMember | Same as MethodC- but returns data ('Func<string>()' instead of 'Action()') |
ARCDoc.SomeAppComponent.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
ARCDoc.DocFrag | ARCDoc | Class | DocFrag = Document fragment. |
ARCDoc.DocFrag.Create Overload1 | ARCDoc | ClassMember | Creates a -DocFrag- object representing an assembly or a namespace. |
ARCDoc.DocFrag.Create Overload2 | ARCDoc | ClassMember | Creates a -DocFrag- object representing a class, class member, enum or enum member. |
ARCDoc.DocFrag.ToHTMLSimpleSingle | ARCDoc | ClassMember | Alternative ('override') to -ToHTMLSimpleSingle-. |
ARCDoc.DocFrag.TryGetP | ARCDoc | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
ARCDoc.DocFrag.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
ARCDoc.DocFrag.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
ARCDoc.DocFragCollection | ARCDoc | Class | Contains a collection of -DocFrag- objects. |
ARCDoc.DocFragCollection.Create | ARCDoc | ClassMember | Creates documentation fragments (-DocFrag-) for all possible -BaseAttribute- elements found in the given assemblies. |
Generated 2025-08-08 09:42:44.801 UTC