[ROOT] doc DocFrag SELECT Assembly, DocFragType, Description.FirstLine() < SKIP 35 > < TAKE 256 >
256 items
DocFragId | Assembly | DocFragType | Description.FirstLine() |
---|---|---|---|
ARCCore.IKIP.TryAssertTypeIntegrity | ARCCore | ClassMember | Asserts that value is of correct type as specified by the key. |
ARCCore.Extensions.Single | ARCCore | ClassMember | Same as inbuilt LINQ's Single except that gives a more friendly exception message |
ARCCore.IKCoded.FromCacheEncoded | ARCCore | ClassMember | Reduces number of objects generated by caching those known to be within a limited range |
ARCCore.Extensions.ToStringWithMS | ARCCore | ClassMember | Uses either format 'd\.hh\:mm\:ss\.fff' or 'hh\:mm\:ss\.fff' depending on TotalHours >=24 hours or not. |
ARCCore.IKCoded.FromCacheUnencoded | ARCCore | ClassMember | Reduces number of objects generated by caching those known to be within a limited range |
ARCCore.IKIP | ARCCore | Class | Container class for key (-IK-), and value (-IP-). |
ARCCore.IKDate | ARCCore | Class | A more memory efficient alternative to -IKString- (together with -IKLong-). |
ARCCore.IKCoded | ARCCore | Class | Understands coded and unencoded variants of -IK-. |
ARCCore.IKDate.op_Equality | ARCCore | ClassMember | It is quite natural in the code to write code like "if (a.CustomerId == b.CustomerId)", therefore the need to implement == and != operators here. |
ARCCore.IKCoded.EnrichKey | ARCCore | ClassMember | 'Implementing' -ITypeDescriber-. |
ARCCore.IKLong.EnrichKey | ARCCore | ClassMember | 'Implementing' -ITypeDescriber-. |
ARCCore.IKCoded.FromEncoded | ARCCore | ClassMember | Note how uses instance cache if already exists there. |
ARCCore.IKString | ARCCore | Class | Index key for any general id, like primary-key or sequence-number or similar. |
ARCCore.IKCoded.TryEncode | ARCCore | ClassMember | Returns a string containing only characters in -AllowedEncodedCharacters-. |
ARCCore.ITypeDescriber.GetSyntaxHelp | ARCCore | ClassMember | Enables explanation of syntax in different contexts from one source: |
ARCCore.IKDate.EnrichKey | ARCCore | ClassMember | 'Implementing' -ITypeDescriber-. |
ARCCore.ParseResult | ARCCore | Class | NOTE: Concept is very old, from the dark ages of AgoRapide's very first inception. There might be room for improvement. |
ARCCore.IKDate.ValidDateTimeFormats | ARCCore | ClassMember | Note: Be very careful about expanding this array. ToString must be considered, and also how Equals should work with other sub classes of IK. |
ARCCore.ParseResult.Result | ARCCore | ClassMember | Will be null if ErrorResponse is set. |
ARCCore.IKLong | ARCCore | Class | A more memory efficient alternative to -IKString-. |
ARCCore.ParseResult.ErrorResponse | ARCCore | ClassMember | Will be null if Result is set |
ARCCore.IKLong.op_Equality | ARCCore | ClassMember | It is quite natural in the code to write code like "if (a.CustomerId == b.CustomerId)", therefore the need to implement == and != operators here. |
ARCCore.PK.TryGetV | ARCCore | ClassMember | Only type of PK, string or type of __enum is allowed to ask for (as TRequest generic type parameter). |
ARCCore.IKString.EnrichKey | ARCCore | ClassMember | 'Implementing' -ITypeDescriber-. |
ARCCore.PK.GetA | ARCCore | ClassMember | Convenience method for easy access to -BasePKAttribute- with corresponding explaining exception if fails |
ARCCore.IKType | ARCCore | Class | Index key used when storing a collection of a given type, like 'Customer'. |
ARCCore.PK.TryGetA | ARCCore | ClassMember | Convenience method for easy access to -BasePKAttribute-. |
ARCCore.IKType.ToString | ARCCore | ClassMember | Caching is supposed to be useful because may be called quite often. |
ARCCore.PK.ModifyCleanerAndValidatorAndParserForCardinality | ARCCore | ClassMember | Called from -Initialize- after _cleaner and _validatorAndParser have been set. |
ARCCore.ITypeDescriber | ARCCore | Class | Provides a standardized mechanism for describing single-property values (like 'PhoneNumber' of 'Customer' for instance). |
ARCCore.PK.Equals | ARCCore | ClassMember | Note that ToString is only based on __enum, meaning that two enum members / enum values with same name but different type, like CustomerP.Name and OrderP.Name, will be considered equal. |
ARCCore.PK.ToString | ARCCore | ClassMember | Caching is supposed to be useful because may be called quite often. |
ARCCore.PK.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
ARCCore.PK.TryValidateAndParse | ARCCore | ClassMember | Parses the value according to specifications for this property key. |
ARCCore.PK..ctor | ARCCore | ClassMember | Constructor with 'object _enum' is necessary in order for ToString to work. |
ARCCore.PK.TryCleanValidateAndParse | ARCCore | ClassMember | Cleans and parses the value according to specifications for this property key. |
ARCCore.PK.Type | ARCCore | ClassMember | Returns type from -PKTypeAttribute-'s -Type-. |
ARCCore.PK.PackParseResultForStorageInEntityObject | ARCCore | ClassMember | Packs result of parsing into a -IP--derived class, suitable for sending to -AddOrUpdateP-. |
ARCCore.PK.__enum | ARCCore | ClassMember | This information is also found as EnumMember. |
ARCCore.PK.GetAllPKForEntityTypeString | ARCCore | ClassMember | Returns all property keys relevant for the given entity type, |
ARCCore.PKHTMLAttribute | ARCCore | Class | Contains pointer to HTML encoder for a property. |
ARCCore.PK.BuildFromStringCache | ARCCore | ClassMember | Builds the content of -_fromStringCache- and also -_allPKForEntityTypeCache-. |
ARCCore.PKHTMLAttribute.Encode | ARCCore | ClassMember | Encodes the given string to HTML format through the static method implemented in class -Encoder-. |
ARCCore.PK.GetTypeMapping | ARCCore | ClassMember | Returns the relevant property key for a given type entity-type and field-type. |
ARCCore.PKHTMLAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
ARCCore.PK.GetObligatoryValuesForEntityType | ARCCore | ClassMember | Returns all obligatory values (based on -IsObligatory-) |
ARCCore.PKLogAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
ARCCore.PK.ValidatorAndParser | ARCCore | ClassMember | Validates and parses a value. |
ARCCore.PKLogAttribute.DoNotLogAtAll | ARCCore | ClassMember | See -DoNotLogAtAll-. |
ARCCore.PK.Cleaner | ARCCore | ClassMember | Cleanup of values, to be used before value is attempted validated. |
ARCCore.PKLogAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
ARCCore.PK.AllEnums | ARCCore | ClassMember | All enums for the whole application. |
ARCCore.PKRelAttribute | ARCCore | Class | Describes relationships between entities (between tables in RDBMS terms). |
ARCCore.PK.AllPKEnums | ARCCore | ClassMember | All -PropertyKeyEnum--tagged enums for the whole application. |
ARCCore.PKTypeAttribute.StandardValidatorAndParser | ARCCore | ClassMember | Returns validator and parser for well known types like string, int, long, bool, DateTime, TimeSpan, Type, Uri. |
ARCCore.PKRelAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
ARCCore.PKTypeAttribute.StandardCleaner | ARCCore | ClassMember | Returns a cleaner for well known types like bool |
ARCCore.PKRelAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
ARCCore.PKTypeAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
ARCCore.PKRelAttribute.ForeignEntity | ARCCore | ClassMember | See -ForeignEntity-. |
ARCCore.PKTypeAttribute.Type | ARCCore | ClassMember | See -Type-. |
ARCCore.PKRelAttribute.OppositeTerm | ARCCore | ClassMember | See -OppositeTerm-. |
ARCCore.IP.HandleException | ARCCore | ClassMember | Note that most relevant to use for -PConcurrent-. |
ARCCore.PKRelAttribute.EnforceReferentialIntegrity | ARCCore | ClassMember | See -EnforceReferentialIntegrity-. |
ARCCore.IP.TryParseDtr | ARCCore | ClassMember | Parses a PropertyStreamLine- beginning with -dtr-. |
ARCCore.PKRelAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
ARCCore.IP.Initialize | ARCCore | ClassMember | Note that has a default implementation (doing nothing). |
ARCCore.PKTypeAttribute | ARCCore | Class | Contains the most basic essential information about a property key, like its description, -Type-, -Cardinality-, -IsObligatory- and -DefaultValue-. |
ARCCore.IP.AssertIntegrity | ARCCore | ClassMember | See -TryAssertIntegrity-. |
ARCCore.PKTypeAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
ARCCore.IP.TrySetPP | ARCCore | ClassMember | SetPP = set property of property. Sets property of entity contained within this class. |
ARCCore.IP.Inc | ARCCore | ClassMember | Increments given property key by 1. Sets to 1 if not found. Uses long, not integer. |
ARCCore.IP.GetKeysEqualToValue | ARCCore | ClassMember | Returns properties which themselves again have key and value equal to the given key and value. |
ARCCore.IP.Dec | ARCCore | ClassMember | Decrements given property key by 1. Sets to -1 if not found. Uses long, not integer. |
ARCCore.IP.OnTrySetP | ARCCore | ClassMember | Event handler to be called by -TrySetP- before it changes a property value (but AFTER it has done any validity checks, that is, after it has 'decided' to return TRUE, in other words, event handler should be called when change is guaranteed to go through, but before it actually has been done). |
ARCCore.IP.Log | ARCCore | ClassMember | The 'final' overload of -Log- that is called by the other overloads. |
ARCCore.IP.TryGetP | ARCCore | ClassMember | Gets a single property for this object |
ARCCore.IP.LogExecuteTime | ARCCore | ClassMember | Times the execution of the given function and logs details about elapsed time. |
ARCCore.IP.GetOrAddPV | ARCCore | ClassMember | Gets value. If not set then value will be added |
ARCCore.IP.ToPropertyStream | ARCCore | ClassMember | Turns object into a -PropertyStream- |
ARCCore.IP.GetPV | ARCCore | ClassMember | Gets a single property's value for this object. Returns default value if not successful. |
ARCCore.IP.ToJSONSerializeable | ARCCore | ClassMember | Prepares the data into a format acceptable for System.Text.Json.JsonSerializer.Serialize. |
ARCCore.IP.TryGetPV | ARCCore | ClassMember | Gets a single property's value for the given property key. |
ARCCore.IP.GetValueForJSONSerializer | ARCCore | ClassMember | Practical approach to serializing of -IP- based values to JSON. |
ARCCore.IP.IsValid | ARCCore | ClassMember | Note that by default all properties are 'valid' but because of -NoRealDeletion-, we must have a mechanism for invalidating properties. This property returns FALSE if property has been invalidated and timestamp for invalidation is not '0001-01-01'. |
ARCCore.IP.TrySetP | ARCCore | ClassMember | Set property regardless of whether exists or not. |
ARCCore.IP.Item | ARCCore | ClassMember | Offers string-based direct indexing. |
ARCCore.IP.TryGetV Overload1 | ARCCore | ClassMember | The actual 'unpacking' of the object. |
ARCCore.IP.Keys | ARCCore | ClassMember | Returns all the keys for this instance. |
ARCCore.IP.DeepCopy | ARCCore | ClassMember | Creates a deep copy of this object instance, that is, a copy with all new object instances (except for immutable objects). |
ARCCore.IP.Values | ARCCore | ClassMember | Returns all the values (all the properties) for this instance. |
ARCCore.IP.AddPV Overload2 | ARCCore | ClassMember | NOTE: The different AddPV / AddP overloads should only be used if you want an assertion against the |
ARCCore.IP.Logger | ARCCore | ClassMember | Describes a logger. |
ARCCore.IP.AddPV Overload1 | ARCCore | ClassMember | Adds a property value (as a -PValue-) for this objectThrows -KeyAlreadyExistsException- when relevant. |
ARCCore.IP.AllIPDerivedTypesDictIKType | ARCCore | ClassMember | Same as -AllIPDerivedTypesDict- except that value is -IKType-, not string. |
ARCCore.P | ARCCore | Class | 'Dummy'-class, not necessarily in use. See -PP- for more information. Created because of the concept of CorrespondingClass which is strictly enforced |
ARCCore.P.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
ARCCore.P.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
ARCCore.P.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
ARCCore.ICreated | ARCCore | Class | A dummy interface signifying that implementing class has the ability to store (in-memory) metadata -Created- |
ARCCore.PCollection | ARCCore | Class | A class useful for storing a collection of entities (a table in RDBMS-terms) because it implements -Indexing-. |
ARCCore.PCollection.TrySetPP | ARCCore | ClassMember | Replaces default interface method -TrySetPP-. |
ARCCore.PII.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
ARCCore.PII.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
ARCCore.IPII | ARCCore | Class | Future expansion, using different classes for storing, not only -PII-. |
ARCCore.IIKII | ARCCore | Class | Related to -PII-, property for storing individual items |
ARCCore.IIKII.PackParseResultForStorageInIKII | ARCCore | ClassMember | This method corresponds to -PackParseResultForStorageInEntityObject-. |
ARCCore.IIKII.PackObjectForStorageInIKII | ARCCore | ClassMember | This method corresponds to -PackObjectForStorageInEntityObject-. |
ARCCore.PReadOnly | ARCCore | Class | Experimental (from Feb 2022) class suitable for classes that do not need to be deserialized, or to accept write requests through -PropertyAccess-. |
ARCCore.PRich | ARCCore | Class | Fully flexible storage. Can store anything. Typical inherited for entity representations like 'Customer' or 'Order'. |
ARCCore.ActualConnection.SetUpToDatePositionGenerator | ARCCore | ClassMember | Set by -StreamProcessor-. Not used by -Client-. |
ARCCore.ActualConnection.InitializeOutgoingConnection | ARCCore | ClassMember | Relevant for -Outgoing-. |
ARCCore.ActualConnection.Communicate | ARCCore | ClassMember | Common for both -Incoming- and -Outgoing-. |
ARCCore.ActualConnection.LogAndSendErrorConditionData | ARCCore | ClassMember | Called when a serious error condition has been discovered and connection should be terminated. |
ARCCore.ActualConnection.Send | ARCCore | ClassMember | Sends all messages in queue. |
ARCCore.ActualConnection.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
ARCCore.ActualConnection..ctor | ARCCore | ClassMember | Note parameter-less constructor as desired for all classes inheriting -IP-. |
ARCCore.MonkeyWrench | ARCCore | Class | Describes level of 'spanner-throwing' this connection shall contibute with |
ARCCore.ConnectionInstruction.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
ARCCore.ConnectionInstruction.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
ARCCore.Sharding | ARCCore | Class | Enables load-balancing by describing what data should be sent over a given connection. |
ARCCore.PropertyStreamLine | ARCCore | Class | Has two main functions: |
ARCCore.PropertyStreamLine.EncodeKeys | ARCCore | ClassMember | Encodes the key part of a -PropertyStreamLine-. |
ARCCore.PropertyStreamLine.EncodeValues | ARCCore | ClassMember | Typically used when turning -WholeCollection- into a value part of a -PropertyStreamLine-. |
ARCCore.PropertyStreamLine.EncodeKeyPart | ARCCore | ClassMember | Converts a single key part of a -PropertyStreamLine- to a format suitable for sending over a -PropertyStream-. |
ARCCore.PropertyStreamLine.EncodeValuePart | ARCCore | ClassMember | Converts a single value part of a -PropertyStreamLine- to a format suitable for sending over a -PropertyStream-. |
ARCCore.StreamProcessor | ARCCore | Class | Implements the storage mechanism for AgoRapide. |
ARCCore.StreamProcessor.CreateBareBonesInstance | ARCCore | ClassMember | Creates a bare-bones -StreamProcessor- instance. |
ARCCore.StreamProcessor.Initialize | ARCCore | ClassMember | Initializes this instance of -StreamProcessor- |
ARCCore.StreamProcessor.AddOrRemoveOutgoingConnections | ARCCore | ClassMember | Not relevant for -CoreDB-. |
ARCCore.StreamProcessor.StartTCPIPCommunication | ARCCore | ClassMember | Starts communicating over TCP/IP. |
ARCCore.StreamProcessor.ReceiveAndDistribute | ARCCore | ClassMember | Process all messages in receive queue. |
ARCCore.StreamProcessor.AddTimestampAsRequired | ARCCore | ClassMember | Adds -Timestamp- to the property stream (to -_queueReceive-) as specified by -TimestampResolution-. |
ARCCore.StreamProcessor.ReadStorageFile | ARCCore | ClassMember | Reads one storage file from disk |
ARCCore.Subscription.SyntaxHelp | ARCCore | ClassMember | '+*' Subscribe to everything in database. |
ARCCore.Subscription.IsAdd | ARCCore | ClassMember | Corresponds to whether value starts with a plus sign, '+' or not. |
ARCCore.Subscription.IsRemove | ARCCore | ClassMember | Corresponds to whether value starts with a minus sign, '+' or not. |
ARCCore.UtilCore | ARCCore | Class | Utility methods for -ARCCore-. |
ARCCore.UtilCore.AssertCurrentlyStartingUp | ARCCore | ClassMember | Normally called from non-thread safe methods that should be run single-threaded at application startup only. |
ARCCore.UtilCore.DoubleTryParse | ARCCore | ClassMember | Note that treats ',' (comma) as decimal point (not as thousands separator). |
ARCCore.UtilCore.EnumTryParse | ARCCore | ClassMember | Same as the inbuilt .NET method -TryParse- but with some additional checks. |
ARCCore.UtilCore.TryGetTypeFromStringNoCache | ARCCore | ClassMember | See -TryGetTypeFromStringFromCache- for documentation. |
ARCCore.UtilCore.ValidDateTimeFormats | ARCCore | ClassMember | 'yyyy-MM-dd HH:mm:ss.fff', 'yyyy-MM-dd HH:mm:ss', 'yyyy-MM-dd HH:mm', 'yyyy-MM-dd' |
ARCCore.UtilCore.ValidTimeSpanFormats | ARCCore | ClassMember | 'hh\:mm', 'hh\:mm\:ss', 'd\.hh\:mm\:ss', 'hh\:mm\:ss\.fff' // Milliseconds,'d\.hh\:mm\:ss\.fff' |
ARCCore.REx | ARCCore | Class | REx = 'TooDeepRecursiveDepthException' |
ARCCore.REx.Inc | ARCCore | ClassMember | Increases recursive count. |
ARCCore.REx.Dec | ARCCore | ClassMember | This method should be called from inside a 'finally' block, in order to secure its execution, if not then your static recursion depth counter could slowly increase over time due to exceptions ocurring after call to -Inc- but before call to -Dec-. |
ARCCore.InvalidTypeException | ARCCore | Class | |
ARCCore.InvalidTypeException.AssertAssignable | ARCCore | ClassMember | Asserts that expectedType.IsAssignableFrom(foundType) |
ARCCore.InvalidTypeException.AssertEquals | ARCCore | ClassMember | Asserts that expectedType.Equals(foundType) |
ARCCore.StreamProcessor+StorageFile.Length | ARCCore | ClassMember | Wrongly placed. Belongs to each individual revision file. |
ARCCore.StreamProcessor+StorageFile.Properties | ARCCore | ClassMember | Key = revision number of file (due to compression / -DataRetention-), like R00001, R00002 and so on. |
ARCCore.BaseAttributeP | ARCCore | Enum | Describes class -BaseAttribute-. |
ARCCore.BaseAttributeP.Description | ARCCore | EnumMember | The description for the attribute, like this description |
ARCCore.BaseAttributeP.LongDescription | ARCCore | EnumMember | The long (detailed) description for the attribute. |
ARCCore.ClassAttributeP | ARCCore | Enum | Describes class -ClassAttribute-. |
ARCCore.ClassAttributeP.AssemblyName | ARCCore | EnumMember | The assembly in which this class resides. |
ARCCore.ClassAttributeP.ClassNamespace | ARCCore | EnumMember | The namespace for -ClassType-. |
ARCCore.PCollection.GetKeysEqualToValue | ARCCore | ClassMember | Returns properties which themselves again have key and value equal to the given key and value. |
ARCCore.PCollection.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
ARCCore.PCollection.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
ARCCore.PCollection.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
ARCCore.IGetKeysEqualToValue | ARCCore | Class | Interface stating that implementing class does not use the default implementation of -GetKeysEqualToValue- (which does not use -Indexing-) but has replaced it with a more efficient implementation assumed to utilize -Indexing-. |
ARCCore.PConcurrent | ARCCore | Class | A (somewhat) thread-safe alternative to -PRich- which also supports -ExposingApplicationState- (through -Logger-). |
ARCCore.PConcurrent.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
ARCCore.PExact<TEnumType> | ARCCore | Class | Very -MemoryConsumption- efficient alternative to -PRich-. |
ARCCore.PRich.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
ARCCore.PRich.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
ARCCore.PRich.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
ARCCore.PValue<T> | ARCCore | Class | Single value storage. |
ARCCore.PValue<T>.TrySetP | ARCCore | ClassMember | NOTE: -TryStore- is explicit aware that -PValue- and -PValueEmpty- |
ARCCore.PValue<T>.TryGetV | ARCCore | ClassMember | Supports duck typing. |
ARCCore.PValue<T>.ConvertObjectToString | ARCCore | ClassMember | Converts object to string. |
ARCCore.PValue<T>.ToString | ARCCore | ClassMember | Do no cache this value, because memory consumption would then increase significantly in your applicationj |
ARCCore.ClientUpdatePosition | ARCCore | Class | Describes from WHERE (from WHEN) in the historic -PropertyStream- new data is to be returned. |
ARCCore.ClientUpdatePosition.Filename | ARCCore | ClassMember | Filename like '2020-04-03 08:42:22_R001' |
ARCCore.ClientUpdatePosition.Index | ARCCore | ClassMember | Index (zero-based) into file. Value of -1 means blank update status / no data received at all (or no data received for this specific filename) |
ARCCore.ClientUpdatePosition.ClientDatastoreIsEmpty | ARCCore | ClassMember | Used by the subscribing client to signify that it has no data stored locally, and it therefore needs an update from the beginning of the -PropertyStream-, that is, 'from the beginning of time'. |
ARCCore.ClientUpdatePosition.OnlyNewDataIsRequested | ARCCore | ClassMember | Used by the subscribing client to signify that it does not care about historical data, the server may start with sending only new data. |
ARCCore.ClientUpdatePosition.IsGoBack | ARCCore | ClassMember | Has to be translated by -StreamProcessor- into a concrete filename / index. |
ARCCore.ClientUpdatePosition.IsAtEndOfStream | ARCCore | ClassMember | Necessary in order to implement -AdHocQuery-. |
ARCCore.ClientUpdatePosition.ClientDatastoreIsEmptyInstance | ARCCore | ClassMember | See also -ClientDatastoreIsEmpty. |
ARCCore.PropertyStreamLine.ParseAndStoreFailSafe | ARCCore | ClassMember | If either parsing or storing fails then this method will call -StoreFailure- in order to keep some track of why parsing or storing failed. |
ARCCore.PropertyStreamLine.StoreFailSafe | ARCCore | ClassMember | Stores if possible and fails silently. |
ARCCore.PropertyStreamLine.StoreFailure | ARCCore | ClassMember | Stores a 'ParseOrStoreFailure'-object. |
ARCCore.PropertyStreamLine.TryStore | ARCCore | ClassMember | Stores the given -PropertyStreamLineParsed- in the given storage object. |
ARCCore.PropertyStreamLine.AllowedKeyChars | ARCCore | ClassMember | Allowed characters in the Key-part of a -PropertyStreamLine-. |
ARCCore.PropertyStreamLine.AllowedValueChars | ARCCore | ClassMember | Allowed characters in the Value-part of a -PropertyStreamLine-. |
ARCCore.PropertyStreamLineParsed | ARCCore | Class | Parses the keys part of a line from -PropertyStream-, like 'Customer/42/FirstName = John. |
ARCCore.PropertyStreamLineParsed.ToString | ARCCore | ClassMember | Note relatively complex operation of 'restoring' original property stream line. |
ARCCore.StreamProcessor.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
ARCCore.StreamProcessor.OutsideLocalReceiver | ARCCore | ClassMember | The outside (in the sense outside of this class) local mechanism which receives all -PropertyStreamLine- registered by this class. |
ARCCore.PropertyStreamLineWithOrigin | ARCCore | Class | The rationale for this class is that -ReceiveAndDistribute- needs to distingush origin of data when routing it (in general, in order to avoid sending it back to its source). |
ARCCore.PropertyStreamLineWithOrigin.HasLocalOrigin | ARCCore | ClassMember | Locally generated data is not to be sent to -OutsideLocalReceiver-). We instead leave it to the 'outside' to decide if |
ARCCore.PropertyStreamLineWithOrigin.SendToLocalReceiver | ARCCore | ClassMember | Means 'send to local receiver regardless of origin'. |
ARCCore.PropertyStreamLineWithOrigin.DoNotAddTimestamp | ARCCore | ClassMember | Normally -StreamProcessor- inserts the required -Timestamp-s in the AgoRapide storage. |
ARCCore.PropertyStreamLineWithOrigin.ReceivedFromOutgoing | ARCCore | ClassMember | Data received from an outgoing connection, that is, data received based on 'this' application's subscription request (as subscribing client). |
ARCCore.StorageFile | ARCCore | Class | Implemented only in order to store some ideas about -Hash-. |
ARCCore.UtilCore.TryGetTypeFromStringFromCache | ARCCore | ClassMember | Corresponding method for creating string-representation of type is -ToStringDB-. |
ARCCore.UtilCore.GetExceptionChainAsString | ARCCore | ClassMember | Follows the chain of InnerException and returns types as comma-separated string |
ARCCore.UtilCore.GetExeptionDetails | ARCCore | ClassMember | Gives as much information about exception as possible. |
ARCCore.UtilCore.DateTimeTryParse | ARCCore | ClassMember | Accepts on of the formats specified in -ValidDateTimeFormats-. |
ARCCore.UtilCore.TimeSpanTryParse | ARCCore | ClassMember | Accepts on of the formats specified in -ValidDateTimeFormats-. |
ARCCore.UtilCore.UseLocalTimeInsteadOfUTC | ARCCore | ClassMember | By default AgoRapide operates only with UTC time. |
ARCCore.UtilCore.DateTimeNow | ARCCore | ClassMember | Returns DateTime.UtcNow unless -UseLocalTimeInsteadOfUTC- has been set to TRUE in which case DateTime.Now is returned. |
ARCCore.UtilCore.CurrentlyStartingUp | ARCCore | ClassMember | Called once at application startup after all Attribute instances in the C# code has been processed. |
ARCCore.TIP.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
ARCCore.BaseAttribute+IncorrectAttributeTypeUsedException | ARCCore | Class | Helps to clean up any confusion about which -BaseAttribute- to use in a given concept. |
ARCCore.PK+BasePKAttributeNotFoundException<T> | ARCCore | Class | Explains how to implement a given -BasePKAttribute- for an enum |
ARCCore.PK+PKBoolPair | ARCCore | Class | Used to signify that a given -PK- returned from value factory inside -FromEnum- has not been initialized (has not yet been populated with -PKTypeAttribute- collection). |
ARCCore.PK+PKBoolPair.TrulyInitialized | ARCCore | ClassMember | Not used currently (May 2020). Useful for debugging purposes |
ARCCore.StreamProcessor+StorageFile | ARCCore | Class | |
ARCCore.StreamProcessor+StorageFile.Filepath | ARCCore | ClassMember | Complete path to file |
ARCCore.StreamProcessor+StorageFile.Filename | ARCCore | ClassMember | Filename: Main file name, like 2020-04-03 08:42 |
ARCCore.EnumAttributeP.AssemblyName | ARCCore | EnumMember | The assembly in which this class resides. |
ARCCore.EnumAttributeP.EnumNamespace | ARCCore | EnumMember | The namespace for -EnumType-. |
ARCCore.EnumAttributeP.EnumType | ARCCore | EnumMember | The type of the enum (like type of 'CustomerP' in CustomerP.FirstName) that we are an attribute for |
ARCCore.EnumAttributeP.AREnumType | ARCCore | EnumMember | Note that will default to -__invalid- if not explicit set. |
ARCCore.EnumAttributeP.CorrespondingClass | ARCCore | EnumMember | Only relevant when -PropertyKeyEnum-. |
ARCCore.EnumMemberAttributeP | ARCCore | Enum | Describes class -EnumMemberAttribute-. |
ARCCore.EnumMemberAttributeP.EnumType | ARCCore | EnumMember | The type of the enum (like type of 'CustomerP' in CustomerP.FirstName) that we are an attribute for |
ARCCore.EnumMemberAttributeP.EnumMember | ARCCore | EnumMember | The actual enum member / enum value (like 'Firstname' in CustomerP.FirstName) that we are an attribute for |
ARCCore.BaseAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
ARCCore.ClassMemberAttribute | ARCCore | Class | Describes a member of a class (a method). |
ARCCore.EnumAttribute.TryGetAsTypeScript | ARCCore | ClassMember | Generates typescript code corresponding to the enum which this instance describes. |
ARCCore.EnumMemberAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
ARCCore.Extensions.KeysAsString | ARCCore | ClassMember | Gives a compressed overview of keys in a dictionary. Helpful for building exception messages. |
ARCCore.IK | ARCCore | Class | IK = Interface Key / Index key. Key used to lookup 'inside' an instance of -IP-. |
ARCCore.IKCoded.AllowedEncodedCharacters | ARCCore | ClassMember | The character set 'A...Za...z0...9-_().,='. |
ARCCore.IKString.FromCache | ARCCore | ClassMember | Reduces number of objects generated by caching those known to be within a limited range |
ARCCore.IKString.FromString | ARCCore | ClassMember | Note how uses instance cache if already exists there |
ARCCore.IKString.op_Equality | ARCCore | ClassMember | It is quite natural in the code to write code like "if (a.CustomerId == b.CustomerId)", therefore the need to implement == and != operators here. |
ARCCore.PK.PackObjectForStorageInEntityObject | ARCCore | ClassMember | See -PackParseResultForStorageInEntityObject- for documentation. |
ARCCore.PK.FromEnum | ARCCore | ClassMember | Returns the corresponding -PK- instance from the given -PropertyKeyEnum-. |
ARCCore.PK.TryGetFromTypeAndFieldName Overload1 | ARCCore | ClassMember | Returns property key based on type and field name. |
ARCCore.PK.GetAllPKForEntityType | ARCCore | ClassMember | Returns all property keys relevant for the given entity type, |
ARCCore.PKHTMLAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
ARCCore.PKHTMLAttribute.Encoder | ARCCore | ClassMember | See -Encoder-. |
ARCCore.PKLogAttribute | ARCCore | Class | Explains how logging of changes to a property should be done. |
ARCCore.PKLogAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
ARCCore.PKTypeAttribute.Cardinality | ARCCore | ClassMember | See -Cardinality-. |
ARCCore.PKTypeAttribute.DefaultValue | ARCCore | ClassMember | See -DefaultValue-. |
ARCCore.IP | ARCCore | Class | IP = IProperty. |
ARCCore.IP.TryGetV Overload2 | ARCCore | ClassMember | The actual value of the property. Mostly relevant for single-value properties like -PValue-. |
ARCCore.IP.AddP | ARCCore | ClassMember | Adds a property for this object. |
ARCCore.IP.AddOrUpdateP | ARCCore | ClassMember | Duplicates functionality of SetP. |
ARCCore.IP.AllIPDerivedTypesWithPKEnumApplicationSpecific | ARCCore | ClassMember | All relevant -IP--derived types for the -ApplicationSpecificCode- part of the application for which also is defined a -PropertyKeyEnum-. |
ARCCore.IP.AllIPDerivedEntityCollectionClassesDict | ARCCore | ClassMember | All -IP--derived types for which is found a corresponding class with name like '{EntityType}Collection' |
ARCCore.IP.AllIPDerivedTypesInludingGenericAndAbstract | ARCCore | ClassMember | All relevant -IP--derived types (except the interface -IP- itself) known to the application. |
ARCCore.IP.AllIPDerivedTypesDict | ARCCore | ClassMember | Provides lookup of a type in -AllIPDerivedTypes- given its string representation. |
ARCCore.PExact<TEnumType>..ctor | ARCCore | ClassMember | Set capacity to the number of members in the -PropertyKeyEnum- for this class (minus the __invalid-value) |
ARCCore.PExact<TEnumType>.Storage | ARCCore | ClassMember | Uses int-value of -__enum- minus 1 as index. |
ARCCore.PII | ARCCore | Class | PII = property for storing individual items. |
ARCCore.PII.TryGetV | ARCCore | ClassMember | Since value is stored in keys, we need to override this method. |
ARCCore.PValueEmpty.ToPropertyStream | ARCCore | ClassMember | Typicall return value could be something like |
ARCCore.ActualConnection | ARCCore | Class | The actual connection, its internal state, queue for sending and so on. |
Generated 2025-06-23 00:38:17.295 UTC