[ROOT] doc DocFrag SELECT Assembly, DocFragType, Description.FirstLine() SKIP 38
1139 items
NOTE: Only 1000 elements of total 1139 shown. Use SKIP and TAKE, or change LIMIT. Try also SHUFFLE.
| DocFragId | Assembly | DocFragType | Description.FirstLine() |
|---|---|---|---|
| ARCCore.IP.TryGetV Overload2 | ARCCore | ClassMember | The actual value of the property. Mostly relevant for single-value properties like -PValue-. |
| ARCCore.EnumAttribute.TryGetAsTypeScript | ARCCore | ClassMember | Generates typescript code corresponding to the enum which this instance describes. |
| ARCCore.EnumMemberAttribute.GetAttribute | ARCCore | ClassMember | Note that illegal to call for -PropertyKeyEnum-. |
| ARCCore.Extensions.Single | ARCCore | ClassMember | Same as inbuilt LINQ's Single except that gives a more friendly exception message |
| ARCCore.IP.HandleException | ARCCore | ClassMember | Note that most relevant to use for -PConcurrent-. |
| ARCCore.EnumMemberAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.IPAttribute | ARCCore | Class | Describes -IP- classes (describes at class-level) |
| ARCCore.Extensions.SingleOrDefault | ARCCore | ClassMember | Same as inbuilt LINQ's SingleOrDefault except that gives a more friendly exception message |
| ARCCore.IP.TryParseDtr | ARCCore | ClassMember | Parses a PropertyStreamLine- beginning with -dtr-. |
| ARCCore.EnumMemberAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.CardinalityExtensions | ARCCore | Class | |
| ARCCore.IKIP.AssertTypeIntegrity | ARCCore | ClassMember | See -TryAssertTypeIntegrity- for documentation. |
| ARCCore.IP.TrySetPP | ARCCore | ClassMember | SetPP = set property of property. Sets property of entity contained within this class. |
| ARCCore.Extensions.ToStringShort | ARCCore | ClassMember | Returns a shorter representation than -ToStringDB-. |
| ARCCore.CardinalityExtensions.IsMultiple | ARCCore | ClassMember | Returns TRUE if given cardinality implies that multiple items are stored simultaneously in a typical in-memory data storage. |
| ARCCore.IKIP.TryAssertTypeIntegrity | ARCCore | ClassMember | Asserts that value is of correct type as specified by the key. |
| ARCCore.IP.GetKeysEqualToValue | ARCCore | ClassMember | Returns properties which themselves again have key and value equal to the given key and value. |
| ARCCore.Extensions.ToStringVeryShort | ARCCore | ClassMember | Returns same as -ToStringShort- but without any generics information at all. |
| ARCCore.Extensions | ARCCore | Class | Contains a few general nice to have extensions methods. |
| ARCCore.IKCoded.FromCacheEncoded | ARCCore | ClassMember | Reduces number of objects generated by caching those known to be within a limited range |
| ARCCore.IP.GetValueForJSONSerializer | ARCCore | ClassMember | Practical approach to serializing of -IP- based values to JSON. |
| ARCCore.Extensions.KeysAsString | ARCCore | ClassMember | Gives a compressed overview of keys in a dictionary. Helpful for building exception messages. |
| ARCCore.Extensions.Use | ARCCore | ClassMember | Convenience method that shortens down code in cases where an instance of an object must be created first in order to use that same variable multiple times |
| ARCCore.IKCoded.FromCacheUnencoded | ARCCore | ClassMember | Reduces number of objects generated by caching those known to be within a limited range |
| ARCCore.IP.TrySetP | ARCCore | ClassMember | Set property regardless of whether exists or not. |
| ARCCore.Extensions.GetValue | ARCCore | ClassMember | Gives better error messages when reading value from directory if key does not exist |
| ARCCore.Extensions.AddValue | ARCCore | ClassMember | Gives better error messages compared to 'original' Add when adding a value to a directory if key already exists |
| ARCCore.IKCoded.AllowedEncodedCharacters | ARCCore | ClassMember | The character set 'A...Za...z0...9-_().,='. |
| ARCCore.IP.TryGetPV | ARCCore | ClassMember | Gets a single property's value for the given property key. |
| ARCCore.Extensions.Result | ARCCore | ClassMember | Returns heading plus return-value of function (calls function). If function == null then empty string is returned |
| ARCCore.Extensions.ToStringWithMS | ARCCore | ClassMember | Uses either format 'd\.hh\:mm\:ss\.fff' or 'hh\:mm\:ss\.fff' depending on TotalHours >=24 hours or not. |
| ARCCore.IKDate | ARCCore | Class | A more memory efficient alternative to -IKString- (together with -IKLong-). |
| ARCCore.IP.IsValid | ARCCore | ClassMember | Note that by default all properties are 'valid' but because of -NoRealDeletion-, we must have a mechanism for invalidating properties. This property returns FALSE if property has been invalidated and timestamp for invalidation is not '0001-01-01'. |
| ARCCore.Extensions.ToStringDateAndTime | ARCCore | ClassMember | Uses format 'yyyy-MM-dd HH:mm:ss.fff'. |
| ARCCore.IKIP | ARCCore | Class | Container class for key (-IK-), and value (-IP-). |
| ARCCore.IKLong.op_Equality | ARCCore | ClassMember | It is quite natural in the code to write code like "if (a.CustomerId == b.CustomerId)", therefore the need to implement == and != operators here. |
| ARCCore.IP.Item | ARCCore | ClassMember | Offers string-based direct indexing. |
| ARCCore.IK | ARCCore | Class | IK = Interface Key / Index key. Key used to lookup 'inside' an instance of -IP-. |
| ARCCore.IKCoded.EnrichKey | ARCCore | ClassMember | 'Implementing' -ITypeDescriber-. |
| ARCCore.IKLong.EnrichKey | ARCCore | ClassMember | 'Implementing' -ITypeDescriber-. |
| ARCCore.IP.Keys | ARCCore | ClassMember | Returns all the keys for this instance. |
| ARCCore.IKCoded | ARCCore | Class | Understands coded and unencoded variants of -IK-. |
| ARCCore.IKCoded.TryCheckValidEncodedValue | ARCCore | ClassMember | Checks if encoded value is valid. |
| ARCCore.ITypeDescriber.GetSyntaxHelp | ARCCore | ClassMember | Enables explanation of syntax in different contexts from one source: |
| ARCCore.IP.AllIPDerivedTypesDictIKType | ARCCore | ClassMember | Same as -AllIPDerivedTypesDict- except that value is -IKType-, not string. |
| ARCCore.IKCoded.FromEncoded | ARCCore | ClassMember | Note how uses instance cache if already exists there. |
| ARCCore.IKCoded.ToString | ARCCore | ClassMember | Returns -Encoded-'s string representation. |
| ARCCore.ParseResult | ARCCore | Class | NOTE: Concept is very old, from the dark ages of AgoRapide's very first inception. There might be room for improvement. |
| ARCCore.P | ARCCore | Class | 'Dummy'-class, not necessarily in use. See -PP- for more information. Created because of the concept of CorrespondingClass which is strictly enforced |
| ARCCore.IKCoded.TryEncode | ARCCore | ClassMember | Returns a string containing only characters in -AllowedEncodedCharacters-. |
| ARCCore.IKCoded.Encoded | ARCCore | ClassMember | This string value can be used directly in folder names, file names and HTTP URL's without any further encoding being necessary. |
| ARCCore.ParseResult.Result | ARCCore | ClassMember | Will be null if ErrorResponse is set. |
| ARCCore.P.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCCore.IKDate.op_Equality | ARCCore | ClassMember | It is quite natural in the code to write code like "if (a.CustomerId == b.CustomerId)", therefore the need to implement == and != operators here. |
| ARCCore.IKDate.ValidDateTimeFormats | ARCCore | ClassMember | Note: Be very careful about expanding this array. ToString must be considered, and also how Equals should work with other sub classes of IK. |
| ARCCore.ParseResult.ErrorResponse | ARCCore | ClassMember | Will be null if Result is set |
| ARCCore.P.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.IKDate.EnrichKey | ARCCore | ClassMember | 'Implementing' -ITypeDescriber-. |
| ARCCore.IKLong | ARCCore | Class | A more memory efficient alternative to -IKString-. |
| ARCCore.PK.TryCleanValidateAndParse | ARCCore | ClassMember | Cleans and parses the value according to specifications for this property key. |
| ARCCore.P.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.IKString | ARCCore | Class | Index key for any general id, like primary-key or sequence-number or similar. |
| ARCCore.IKString.EnrichKey | ARCCore | ClassMember | 'Implementing' -ITypeDescriber-. |
| ARCCore.PK.PackParseResultForStorageInEntityObject | ARCCore | ClassMember | Packs result of parsing into a -IP--derived class, suitable for sending to -AddOrUpdateP-. |
| ARCCore.ICreated | ARCCore | Class | A dummy interface signifying that implementing class has the ability to store (in-memory) metadata -Created- |
| ARCCore.IKString.FromCache | ARCCore | ClassMember | Reduces number of objects generated by caching those known to be within a limited range |
| ARCCore.IKType | ARCCore | Class | Index key used when storing a collection of a given type, like 'Customer'. |
| ARCCore.PK.PackObjectForStorageInEntityObject | ARCCore | ClassMember | See -PackParseResultForStorageInEntityObject- for documentation. |
| ARCCore.PCollection | ARCCore | Class | A class useful for storing a collection of entities (a table in RDBMS-terms) because it implements -Indexing-. |
| ARCCore.IKString.FromString | ARCCore | ClassMember | Note how uses instance cache if already exists there |
| ARCCore.IKType.ToString | ARCCore | ClassMember | Caching is supposed to be useful because may be called quite often. |
| ARCCore.PK.FromEnum | ARCCore | ClassMember | Returns the corresponding -PK- instance from the given -PropertyKeyEnum-. |
| ARCCore.PCollection.TrySetPP | ARCCore | ClassMember | Replaces default interface method -TrySetPP-. |
| ARCCore.IKString.op_Equality | ARCCore | ClassMember | It is quite natural in the code to write code like "if (a.CustomerId == b.CustomerId)", therefore the need to implement == and != operators here. |
| ARCCore.ITypeDescriber | ARCCore | Class | Provides a standardized mechanism for describing single-property values (like 'PhoneNumber' of 'Customer' for instance). |
| ARCCore.PK.Equals | ARCCore | ClassMember | Note that ToString is only based on __enum, meaning that two enum members / enum values with same name but different type, like CustomerP.Name and OrderP.Name, will be considered equal. |
| ARCCore.PCollection.GetKeysEqualToValue | ARCCore | ClassMember | Returns properties which themselves again have key and value equal to the given key and value. |
| ARCCore.PK | ARCCore | Class | PK = AgoRapide PropertyKey. |
| ARCCore.PK.TryGetA | ARCCore | ClassMember | Convenience method for easy access to -BasePKAttribute-. |
| ARCCore.PK.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCCore.PCollection.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCCore.PK.TryGetEnum | ARCCore | ClassMember | Note that usually you will not have to ask for this value, usually in AgoRapide it goes the other way around, you have the enum member / enum value and want the corresponding property key. |
| ARCCore.PK.ModifyCleanerAndValidatorAndParserForCardinality | ARCCore | ClassMember | Called from -Initialize- after _cleaner and _validatorAndParser have been set. |
| ARCCore.PK..ctor | ARCCore | ClassMember | Constructor with 'object _enum' is necessary in order for ToString to work. |
| ARCCore.PCollection.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.PK.TryGetV | ARCCore | ClassMember | Only type of PK, string or type of __enum is allowed to ask for (as TRequest generic type parameter). |
| ARCCore.PK.ToString | ARCCore | ClassMember | Caching is supposed to be useful because may be called quite often. |
| ARCCore.PK.Type | ARCCore | ClassMember | Returns type from -PKTypeAttribute-'s -Type-. |
| ARCCore.PCollection.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.PK.GetA | ARCCore | ClassMember | Convenience method for easy access to -BasePKAttribute- with corresponding explaining exception if fails |
| ARCCore.PK.TryValidateAndParse | ARCCore | ClassMember | Parses the value according to specifications for this property key. |
| ARCCore.ActualConnectionP.ClientUpdatePosition | ARCCore | EnumMember | Note how this is stored both as -ClientUpdatePosition- (on the client side) and -ClientUpdatePosition- (on the server side). |
| ARCCore.PExact<TEnumType>..ctor | ARCCore | ClassMember | Set capacity to the number of members in the -PropertyKeyEnum- for this class (minus the __invalid-value) |
| ARCCore.PK.GetAllPKForEntityTypeString | ARCCore | ClassMember | Returns all property keys relevant for the given entity type, |
| ARCCore.PK.TryGetFromTypeAndFieldName Overload3 | ARCCore | ClassMember | Returns property key based on type and field name. |
| ARCCore.ActualConnectionP.SubscriptionAsRequestedByClient | ARCCore | EnumMember | Originates from -Subscription-. |
| ARCCore.PExact<TEnumType>.Storage | ARCCore | ClassMember | Uses int-value of -__enum- minus 1 as index. |
| ARCCore.PK.BuildFromStringCache | ARCCore | ClassMember | Builds the content of -_fromStringCache- and also -_allPKForEntityTypeCache-. |
| ARCCore.PK.TryGetFromTypeAndFieldName Overload2 | ARCCore | ClassMember | Returns property key based on type and field name. |
| ARCCore.ActualConnectionP.ClosingReason | ARCCore | EnumMember | Reason why this connection was closed |
| ARCCore.PII | ARCCore | Class | PII = property for storing individual items. |
| ARCCore.PK.GetTypeMapping | ARCCore | ClassMember | Returns the relevant property key for a given type entity-type and field-type. |
| ARCCore.PK.TryGetFromTypeAndFieldName Overload1 | ARCCore | ClassMember | Returns property key based on type and field name. |
| ARCCore.ActualConnectionP.IsErrorCondition | ARCCore | EnumMember | Some kind of error condition has occured regarding data going back and forth, but the TCP/IP connection itself is probably sound. |
| ARCCore.PII.TryGetV | ARCCore | ClassMember | Since value is stored in keys, we need to override this method. |
| ARCCore.PK.GetObligatoryValuesForEntityType | ARCCore | ClassMember | Returns all obligatory values (based on -IsObligatory-) |
| ARCCore.PK.GetAllPKForEntityType | ARCCore | ClassMember | Returns all property keys relevant for the given entity type, |
| ARCCore.MultipleConnectionUsage.Simultaneous | ARCCore | EnumMember | This connection to be used simultaneously with other connections with -Simultaneous- |
| ARCCore.PRich.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCCore.PK.AllEnums | ARCCore | ClassMember | All enums for the whole application. |
| ARCCore.PK.Cardinality | ARCCore | ClassMember | Returns cardinality from -PKTypeAttribute-'s -Cardinality-. |
| ARCCore.StreamProcessorP | ARCCore | Enum | Describes class -StreamProcessor-. |
| ARCCore.PRich.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.PK.AllPKEnums | ARCCore | ClassMember | All -PropertyKeyEnum--tagged enums for the whole application. |
| ARCCore.PK.CorrespondingClass | ARCCore | ClassMember | Returns -CorrespondingClass- based on -__enum-. |
| ARCCore.StreamProcessorP.LocalStorageFolder | ARCCore | EnumMember | The local path to which new properties are stored. Should NOT end with any trailing DirectorySeparatorChar |
| ARCCore.PRich.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.PK.__enum | ARCCore | ClassMember | This information is also found as EnumMember. |
| ARCCore.PK.ValidatorAndParser | ARCCore | ClassMember | Validates and parses a value. |
| ARCCore.StreamProcessorP.IndividualStorageFileSize | ARCCore | EnumMember | Max size (in bytes) for a single storage file before a new file is created by call to -StreamProcessor.CreateNewStorageFile-. |
| ARCCore.PValue<T> | ARCCore | Class | Single value storage. |
| ARCCore.PKHTMLAttribute | ARCCore | Class | Contains pointer to HTML encoder for a property. |
| ARCCore.PK.Cleaner | ARCCore | ClassMember | Cleanup of values, to be used before value is attempted validated. |
| ARCCore.StreamProcessorP.CurrentlyInitializing | ARCCore | EnumMember | Set to TRUE at initialization (signals for instance -ReceiveAndDistribute- that it can only queue messages, not process them). |
| ARCCore.PValue<T>.TrySetP | ARCCore | ClassMember | NOTE: -TryStore- is explicit aware that -PValue- and -PValueEmpty- |
| ARCCore.PKLogAttribute | ARCCore | Class | Explains how logging of changes to a property should be done. |
| ARCCore.PKHTMLAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.StreamProcessorP.ClientUpdatePositionPath | ARCCore | EnumMember | Complete path to file containing -ClientUpdatePosition-. |
| ARCCore.PValue<T>.TryGetV | ARCCore | ClassMember | Supports duck typing. |
| ARCCore.PKLogAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.PKHTMLAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.StreamProcessorP.ClientUpdatePosition | ARCCore | EnumMember | Note how this is stored both as -ClientUpdatePosition- (on the client side) and -ClientUpdatePosition- (on the server side). |
| ARCCore.PValue<T>.ConvertObjectToString | ARCCore | ClassMember | Converts object to string. |
| ARCCore.PKLogAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.PKHTMLAttribute.Encoder | ARCCore | ClassMember | See -Encoder-. |
| ARCCore.StreamProcessorP.IncomingConnectionsPortNo | ARCCore | EnumMember | If not set, then class will not listen for incoming connections (meaning that our application is probably a -Client-). |
| ARCCore.PValue<T>.ToString | ARCCore | ClassMember | Do no cache this value, because memory consumption would then increase significantly in your applicationj |
| ARCCore.PKLogAttribute.DoNotLogAtAll | ARCCore | ClassMember | See -DoNotLogAtAll-. |
| ARCCore.PKHTMLAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCDoc.Apple.Name | ARCDoc | ClassMember | Convenience method, not obligatory. |
| ARCCore.PValue<T>.DeepCopy | ARCCore | ClassMember | Note that if the generic type (T) is not immutable, then what we return will not be a truly deep copy. |
| ARCCore.PKRelAttribute.EnforceReferentialIntegrity | ARCCore | ClassMember | See -EnforceReferentialIntegrity-. |
| ARCCore.PKRelAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCDoc.Banana | ARCDoc | Class | Implements -IP- directly and uses traditional property storage for optimum -MemoryConsumption- efficiency. |
| ARCCore.PValue<T>..ctor | ARCCore | ClassMember | Note how this class does not have a parameter-less constructor (unlike all other -IP--derived classes in AgoRapide) |
| ARCCore.PKRelAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.PKRelAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCDoc.Banana.Name | ARCDoc | ClassMember | Annotated as nullable in order to keep flexibility of -PropertyAccess-, including what happens if values are not set (TryGetP etc) |
| ARCCore.PValueEmpty | ARCCore | Class | Represents the 'no value'. |
| ARCCore.PKTypeAttribute | ARCCore | Class | Contains the most basic essential information about a property key, like its description, -Type-, -Cardinality-, -IsObligatory- and -DefaultValue-. |
| ARCCore.PKRelAttribute.ForeignEntity | ARCCore | ClassMember | See -ForeignEntity-. |
| ARCDoc.Banana.Colour | ARCDoc | ClassMember | Annotated as nullable in order to keep flexibility of -PropertyAccess-, including what happens if values are not set (TryGetP etc) |
| ARCCore.PValueEmpty.TrySetP | ARCCore | ClassMember | NOTE: -TryStore- is explicit aware that -PValue- and -PValueEmpty- |
| ARCCore.PKTypeAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.PKRelAttribute.OppositeTerm | ARCCore | ClassMember | See -OppositeTerm-. |
| ARCDoc.Demonstrator | ARCDoc | Class | Demonstrates various concepts from -ARCCore-, especially -PropertyAccess-. |
| ARCCore.ClientUpdatePosition.OnlyNewDataIsRequested | ARCCore | ClassMember | Used by the subscribing client to signify that it does not care about historical data, the server may start with sending only new data. |
| ARCCore.IP.Inc | ARCCore | ClassMember | Increments given property key by 1. Sets to 1 if not found. Uses long, not integer. |
| ARCCore.PKTypeAttribute.Cardinality | ARCCore | ClassMember | See -Cardinality-. |
| ARCDoc.Demonstrator.DemonstratePropertyAccessApple | ARCDoc | ClassMember | Demonstrates use of -PropertyAccess- through the -Apple- class. |
| ARCCore.ClientUpdatePosition.IsGoBack | ARCCore | ClassMember | Has to be translated by -StreamProcessor- into a concrete filename / index. |
| ARCCore.IP.Dec | ARCCore | ClassMember | Decrements given property key by 1. Sets to -1 if not found. Uses long, not integer. |
| ARCCore.PKTypeAttribute.DefaultValue | ARCCore | ClassMember | See -DefaultValue-. |
| ARCDoc.Demonstrator.DemonstratePropertyAccessOrange | ARCDoc | ClassMember | Demonstrates use of -PropertyAccess- through the -Orange- class. |
| ARCCore.ClientUpdatePosition.IsAtEndOfStream | ARCCore | ClassMember | Necessary in order to implement -AdHocQuery-. |
| ARCCore.IP.Log | ARCCore | ClassMember | The 'final' overload of -Log- that is called by the other overloads. |
| ARCCore.PKTypeAttribute.IsObligatory | ARCCore | ClassMember | See -IsObligatory-. |
| ARCDoc.Demonstrator.DemonstratePropertyAccessBanana | ARCDoc | ClassMember | Demonstrates use of -PropertyAccess- through the -Banana- class. |
| ARCCore.ClientUpdatePosition.ClientDatastoreIsEmptyInstance | ARCCore | ClassMember | See also -ClientDatastoreIsEmpty. |
| ARCCore.IP.LogExecuteTime | ARCCore | ClassMember | Times the execution of the given function and logs details about elapsed time. |
| ARCCore.PKTypeAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCDoc.SomeAppComponent.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.ClientUpdatePosition.OnlyNewDataIsRequestedInstance | ARCCore | ClassMember | See also -OnlyNewDataIsRequested. |
| ARCCore.IP.OnTrySetP | ARCCore | ClassMember | Event handler to be called by -TrySetP- before it changes a property value (but AFTER it has done any validity checks, that is, after it has 'decided' to return TRUE, in other words, event handler should be called when change is guaranteed to go through, but before it actually has been done). |
| ARCCore.IP.Initialize | ARCCore | ClassMember | Note that has a default implementation (doing nothing). |
| ARCDoc.DocFrag | ARCDoc | Class | DocFrag = Document fragment. |
| ARCCore.ConnectionInstruction | ARCCore | Class | The instruction about what connections to make (host, portnr, data transfer direction and so on). |
| ARCCore.IP.TryGetP | ARCCore | ClassMember | Gets a single property for this object |
| ARCCore.IP.AssertIntegrity | ARCCore | ClassMember | See -TryAssertIntegrity-. |
| ARCDoc.DocFrag.Create Overload1 | ARCDoc | ClassMember | Creates a -DocFrag- object representing an assembly or a namespace. |
| ARCCore.ConnectionInstruction.Initialize | ARCCore | ClassMember | Initializes to sane values. |
| ARCCore.IP.ToPropertyStream | ARCCore | ClassMember | Turns object into a -PropertyStream- |
| ARCCore.IP.TryAssertIntegrity | ARCCore | ClassMember | Asserts the integrity of this entity. |
| ARCDoc.DocFrag.Create Overload2 | ARCDoc | ClassMember | Creates a -DocFrag- object representing a class, class member, enum or enum member. |
| ARCCore.ConnectionInstruction.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCCore.IP.ToJSONSerializeable | ARCCore | ClassMember | Prepares the data into a format acceptable for System.Text.Json.JsonSerializer.Serialize. |
| ARCCore.IP.ToString | ARCCore | ClassMember | The ToString()-implementation in the classes implementing this interface is supposed to give a short concise representation of the object for debugging and logging purposes, that is, intended for human consumption. The most 'important' implementation is probably the one in -PRich- (-ToString-) because that one is often the basis for your entity classes like 'Customer', 'Order' and so on |
| ARCDoc.DocLink.LinkWordHTMLWithHyphens | ARCDoc | ClassMember | -LinkWordHTML- with '-' (minus sign / hyphen) prepended and appended. |
| ARCCore.PropertyStreamLine.Decode | ARCCore | ClassMember | Decodes string as encoded by -EncodeKeyPart- or -EncodeValuePart-. |
| ARCCore.IP.Values | ARCCore | ClassMember | Returns all the values (all the properties) for this instance. |
| ARCCore.IP.TryGetV Overload1 | ARCCore | ClassMember | The actual 'unpacking' of the object. |
| ARCDoc.DocLink.LinkWordHTMLBeforeLt | ARCDoc | ClassMember | If -LinkWordHTML contains '<' (really '<') (for generic types, like 'PValue<TValue>') then this will contain the part before '<' like 'PValue'. |
| ARCCore.PropertyStreamLine.TryParseDirectToIP | ARCCore | ClassMember | Parses a series of -PropertyStreamLine- directly to the given type of -IP-. |
| ARCCore.IP.Logger | ARCCore | ClassMember | Describes a logger. |
| ARCCore.IP.DeepCopy | ARCCore | ClassMember | Creates a deep copy of this object instance, that is, a copy with all new object instances (except for immutable objects). |
| ARCDoc.DocLink.LinkWordHTMLBeforeLtWithHyphens | ARCDoc | ClassMember | -LinkWordHTMLBeforeLt- with '-' (minus sign / hyphen) prepended and appended. |
| ARCCore.PropertyStreamLine.TryParseDirectToProperty | ARCCore | ClassMember | Parses direct to a given property value. |
| ARCCore.IP.AllIPDerivedTypes | ARCCore | ClassMember | All relevant -IP--derived types for the whole application. |
| ARCCore.IP.AddPV Overload2 | ARCCore | ClassMember | NOTE: The different AddPV / AddP overloads should only be used if you want an assertion against the |
| ARCDoc.DocLink.AHrefEndPart | ARCDoc | ClassMember | 'Filename.Encoded + "> + LinkWordHTML + </a>' |
| ARCCore.PropertyStreamLine.ParseAndStore | ARCCore | ClassMember | Note that throws exception if -TryParseAndStore- fails. |
| ARCCore.IP.AllIPDerivedTypesWithPKEnum | ARCCore | ClassMember | All relevant -IP--derived types for the whole application for which the also is defined a -PropertyKeyEnum-. |
| ARCCore.IP.AddPV Overload1 | ARCCore | ClassMember | Adds a property value (as a -PValue-) for this objectThrows -KeyAlreadyExistsException- when relevant. |
| ARCDoc.DocLinkCollection | ARCDoc | Class | Contains a collection of -DocLink- objects. |
| ARCCore.PropertyStreamLine.ParseAndStoreFailSafe | ARCCore | ClassMember | If either parsing or storing fails then this method will call -StoreFailure- in order to keep some track of why parsing or storing failed. |
| ARCCore.IP.AllIPDerivedTypesWithPKEnumApplicationSpecific | ARCCore | ClassMember | All relevant -IP--derived types for the -ApplicationSpecificCode- part of the application for which also is defined a -PropertyKeyEnum-. |
| ARCCore.IP.AddP | ARCCore | ClassMember | Adds a property for this object. |
| ARCDoc.DocLinkCollection.Create | ARCDoc | ClassMember | Notes all locations and their positions in the hierarchical directory structure. |
| ARCCore.PropertyStreamLine.StoreFailSafe | ARCCore | ClassMember | Stores if possible and fails silently. |
| ARCCore.IP.AllIPDerivedEntityCollectionClassesDict | ARCCore | ClassMember | All -IP--derived types for which is found a corresponding class with name like '{EntityType}Collection' |
| ARCCore.IP.AddOrUpdateP | ARCCore | ClassMember | Duplicates functionality of SetP. |
| ARCDoc.DocLinkCollection.InsertLinks Overload1 | ARCDoc | ClassMember | Does -LinkInsertionInDocumentation- on the given HTML content. |
| ARCCore.PropertyStreamLine.StoreFailure | ARCCore | ClassMember | Stores a 'ParseOrStoreFailure'-object. |
| ARCCore.IP.AllIPDerivedTypesInludingGenericAndAbstract | ARCCore | ClassMember | All relevant -IP--derived types (except the interface -IP- itself) known to the application. |
| ARCCore.IP.GetOrAddPV | ARCCore | ClassMember | Gets value. If not set then value will be added |
| ARCDoc.DocLinkCollection.InsertLinks Overload2 | ARCDoc | ClassMember | See overload with 'contentLocation' as parameter for documentation. |
| ARCCore.PropertyStreamLine.TryStore | ARCCore | ClassMember | Stores the given -PropertyStreamLineParsed- in the given storage object. |
| ARCCore.IP.AllIPDerivedTypesDict | ARCCore | ClassMember | Provides lookup of a type in -AllIPDerivedTypes- given its string representation. |
| ARCCore.IP.GetPV | ARCCore | ClassMember | Gets a single property's value for this object. Returns default value if not successful. |
| ARCDoc.Documentator.CreateHTOCNamespace | ARCDoc | ClassMember | Creates a table of contents structured by namespace |
| ARCCore.StreamProcessor | ARCCore | Class | Implements the storage mechanism for AgoRapide. |
| ARCCore.IGetKeysEqualToValue | ARCCore | Class | Interface stating that implementing class does not use the default implementation of -GetKeysEqualToValue- (which does not use -Indexing-) but has replaced it with a more efficient implementation assumed to utilize -Indexing-. |
| ARCDoc.Documentator.CreateHTOCInheritance | ARCDoc | ClassMember | Creates a table of contents structured by inheritance (classes and interfaces only, not members). |
| ARCCore.StreamProcessor.CreateBareBonesInstance | ARCCore | ClassMember | Creates a bare-bones -StreamProcessor- instance. |
| ARCCore.PConcurrent | ARCCore | Class | A (somewhat) thread-safe alternative to -PRich- which also supports -ExposingApplicationState- (through -Logger-). |
| ARCDoc.Documentator.TryGetP | ARCDoc | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCCore.StreamProcessor.Initialize | ARCCore | ClassMember | Initializes this instance of -StreamProcessor- |
| ARCCore.PConcurrent.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.Documentator.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.StreamProcessor.AddOrRemoveOutgoingConnections | ARCCore | ClassMember | Not relevant for -CoreDB-. |
| ARCCore.PExact<TEnumType> | ARCCore | Class | Very -MemoryConsumption- efficient alternative to -PRich-. |
| ARCDoc.Documentator.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.StreamProcessor.StartTCPIPCommunication | ARCCore | ClassMember | Starts communicating over TCP/IP. |
| ARCCore.PExact<TEnumType>.SetPVDirect | ARCCore | ClassMember | High performance alternative to -TrySetP-, accessing -Storage- more direct. |
| ARCDoc.Documentator.DocLinks | ARCDoc | ClassMember | Set by -CreateAndInsert-. |
| ARCCore.StreamProcessor.ReceiveAndDistribute | ARCCore | ClassMember | Process all messages in receive queue. |
| ARCCore.PExact<TEnumType>.GetPVDirect | ARCCore | ClassMember | High performance alternative to -TryGetP-, accessing -Storage- more direct. |
| ARCDoc.Documentator.DocLinkResolutionLocation | ARCDoc | ClassMember | Default position within the global storage context of doc link resolution pages. |
| ARCCore.StreamProcessor.AddTimestampAsRequired | ARCCore | ClassMember | Adds -Timestamp- to the property stream (to -_queueReceive-) as specified by -TimestampResolution-. |
| ARCCore.PExact<TEnumType>.TryGetPVDirect | ARCCore | ClassMember | High performance alternative to -TryGetP-, accessing -Storage- more direct. |
| ARCDoc.DummyEnum | ARCDoc | Class | TODO: Document better what this is for (and change name) |
| ARCCore.StreamProcessor.ReadStorageFile | ARCCore | ClassMember | Reads one storage file from disk |
| ARCCore.PExact<TEnumType>.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.HLocation.Content | ARCDoc | ClassMember | The Content object is not stored within the standard -IP--mechanism. |
| ARCCore.StreamProcessor.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.PValueEmpty.ToPropertyStream | ARCCore | ClassMember | Typicall return value could be something like |
| ARCDoc.HLocationCollection | ARCDoc | Class | Contains a collection of -HLocation- objects. |
| ARCCore.StreamProcessor.OutsideLocalReceiver | ARCCore | ClassMember | The outside (in the sense outside of this class) local mechanism which receives all -PropertyStreamLine- registered by this class. |
| ARCCore.ActualConnection | ARCCore | Class | The actual connection, its internal state, queue for sending and so on. |
| ARCDoc.HLocationCollection.Create | ARCDoc | ClassMember | Transforms the parameter (and recursively all contained objects) into a collection of -HLocation- objects. |
| ARCCore.PropertyStreamLineWithOrigin | ARCCore | Class | The rationale for this class is that -ReceiveAndDistribute- needs to distingush origin of data when routing it (in general, in order to avoid sending it back to its source). |
| ARCCore.ActualConnection.SetMyUpdatePositionGenerator | ARCCore | ClassMember | Set by -StreamProcessor-. |
| ARCDoc.HLocationCollection.WriteAllContentHTMLToDisk | ARCDoc | ClassMember | Writes all -HLocation- results to a hierarhical folder structure as static HTML files with (optionally) -LinkInsertionInDocumentation-. |
| ARCCore.PropertyStreamLineWithOrigin.HasLocalOrigin | ARCCore | ClassMember | Locally generated data is not to be sent to -OutsideLocalReceiver-). We instead leave it to the 'outside' to decide if |
| ARCCore.ActualConnection.SetSinglePropertyStreamReceiver | ARCCore | ClassMember | Set by -StreamProcessor-. |
| ARCDoc.HLocationCollection.TryGetP | ARCDoc | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCCore.PropertyStreamLineWithOrigin.SendToLocalReceiver | ARCCore | ClassMember | Means 'send to local receiver regardless of origin'. |
| ARCCore.ActualConnection.SetUpToDatePositionGenerator | ARCCore | ClassMember | Set by -StreamProcessor-. Not used by -Client-. |
| ARCDoc.HLocationCollection.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.PropertyStreamLineWithOrigin.DoNotAddTimestamp | ARCCore | ClassMember | Normally -StreamProcessor- inserts the required -Timestamp-s in the AgoRapide storage. |
| ARCCore.ActualConnection.InitializeOutgoingConnection | ARCCore | ClassMember | Relevant for -Outgoing-. |
| ARCDoc.HLocationCollection.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.PropertyStreamLineWithOrigin.ReceivedFromOutgoing | ARCCore | ClassMember | Data received from an outgoing connection, that is, data received based on 'this' application's subscription request (as subscribing client). |
| ARCCore.ActualConnection.Communicate | ARCCore | ClassMember | Common for both -Incoming- and -Outgoing-. |
| ARCDoc.HTOC | ARCDoc | Class | HTOC = Hierarchical table of contents. |
| ARCCore.StorageFile | ARCCore | Class | Implemented only in order to store some ideas about -Hash-. |
| ARCCore.ActualConnection.LogAndSendErrorConditionData | ARCCore | ClassMember | Called when a serious error condition has been discovered and connection should be terminated. |
| ARCDoc.DocFragP.Assembly | ARCDoc | EnumMember | Name of the assembly in which this fragment resides. |
| ARCCore.UtilCore.TryGetTypeFromStringFromCache | ARCCore | ClassMember | Corresponding method for creating string-representation of type is -ToStringDB-. |
| ARCCore.ConnectionInstruction.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCDoc.DocFragP.Namespace | ARCDoc | EnumMember | Namespace in which this fragment resides. |
| ARCCore.UtilCore.GetExceptionChainAsString | ARCCore | ClassMember | Follows the chain of InnerException and returns types as comma-separated string |
| ARCCore.ConnectionInstruction.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.DocFragP.ParentNamespace | ARCDoc | EnumMember | Parent namespace of namespace in which this fragment resides. |
| ARCCore.UtilCore.GetExeptionDetails | ARCCore | ClassMember | Gives as much information about exception as possible. |
| ARCCore.Sharding | ARCCore | Class | Enables load-balancing by describing what data should be sent over a given connection. |
| ARCDoc.DocFragP.Type | ARCDoc | EnumMember | Type of class or enum which this fragment describes (also relevant for class or enum member). |
| ARCCore.UtilCore.DateTimeTryParse | ARCCore | ClassMember | Accepts on of the formats specified in -ValidDateTimeFormats-. |
| ARCCore.PropertyStreamLine | ARCCore | Class | Has two main functions: |
| ARCDoc.DocFragP.Name | ARCDoc | EnumMember | As simple a name as practical usable. Often not unique within a greater context. |
| ARCCore.UtilCore.TimeSpanTryParse | ARCCore | ClassMember | Accepts on of the formats specified in -ValidDateTimeFormats-. |
| ARCCore.PropertyStreamLine.EncodeKeys | ARCCore | ClassMember | Encodes the key part of a -PropertyStreamLine-. |
| ARCDoc.DocFragP.IsInherited | ARCDoc | EnumMember | Relevant for class members. TRUE if method is inherited from a base type. |
| ARCCore.UtilCore.UseLocalTimeInsteadOfUTC | ARCCore | ClassMember | By default AgoRapide operates only with UTC time. |
| ARCCore.PropertyStreamLine.EncodeValues | ARCCore | ClassMember | Typically used when turning -WholeCollection- into a value part of a -PropertyStreamLine-. |
| ARCDoc.DocFragP.IsInheritedDoc | ARCDoc | EnumMember | Relevant for class members (methods). |
| ARCCore.UtilCore.DateTimeNow | ARCCore | ClassMember | Returns DateTime.UtcNow unless -UseLocalTimeInsteadOfUTC- has been set to TRUE in which case DateTime.Now is returned. |
| ARCCore.PropertyStreamLine.EncodeKeyPart | ARCCore | ClassMember | Converts a single key part of a -PropertyStreamLine- to a format suitable for sending over a -PropertyStream-. |
| ARCDoc.DocFragP.Lines | ARCDoc | EnumMember | Number of lines of text in -Description- and -LongDescription- for this fragment. |
| ARCCore.UtilCore.CurrentlyStartingUp | ARCCore | ClassMember | Called once at application startup after all Attribute instances in the C# code has been processed. |
| ARCCore.PropertyStreamLine.EncodeValuePart | ARCCore | ClassMember | Converts a single value part of a -PropertyStreamLine- to a format suitable for sending over a -PropertyStream-. |
| ARCDoc.DummyEnumP | ARCDoc | Enum | TODO: Document better what this is for (and change name) |
| ARCCore.UtilCore.Assemblies | ARCCore | ClassMember | All relevant assemblies for application. |
| ARCCore.StorageFile.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCDoc.DummyEnumP._MemberInherited | ARCDoc | EnumMember | Contains not only members which are inherited in the object-oriented sense, but also overrides for which the only documentation was found in base class |
| ARCCore.UtilCore.Culture | ARCCore | ClassMember | The general culture used for parsing. |
| ARCCore.StorageFile.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCDoc.HLocationP | ARCDoc | Enum | Describes class -HLocation-. |
| ARCCore.UtilCore.Culture_en_US | ARCCore | ClassMember | Used by -DoubleTryParse-. |
| ARCCore.StorageFile.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.HLocationP.Location | ARCDoc | EnumMember | Folder names / hierarchical levels. |
| ARCCore.UtilCore.DefaultAgoRapideEncoding | ARCCore | ClassMember | The standard encoding used for text (UTF8). |
| ARCCore.Subscription | ARCCore | Class | A stream -Subscription- is the concept of how nodes (see -ARNodeType-) subscribe to the -PropertyStream- (either the whole stream or just part of it) in a distributed manner. |
| ARCDoc.HLocationP.Filename | ARCDoc | EnumMember | Either the last hierarhical key for the content's location, or Index.html if no location. |
| ARCCore.UtilCore.ValidDateTimeFormats | ARCCore | ClassMember | 'yyyy-MM-dd HH:mm:ss.fff', 'yyyy-MM-dd HH:mm:ss', 'yyyy-MM-dd HH:mm', 'yyyy-MM-dd' |
| ARCCore.Subscription.FromTime | ARCCore | ClassMember | TODO: Implement concept of specifying starting-point in TIME (often for an -AdHocQuery-?). |
| ARCDoc.HLocationP.ContentType | ARCDoc | EnumMember | The type of the content object. The actual content object is stored as -Content-. |
| ARCCore.UtilCore.ValidTimeSpanFormats | ARCCore | ClassMember | 'hh\:mm', 'hh\:mm\:ss', 'd\.hh\:mm\:ss', 'hh\:mm\:ss\.fff' // Milliseconds,'d\.hh\:mm\:ss\.fff' |
| ARCCore.Subscription.ToTime | ARCCore | ClassMember | TODO: Implement concept of specifying ending-point in TIME (often for an -AdHocQuery-?). |
| ARCDoc.PKDocAttributeP | ARCDoc | Enum | Describes class -PKDocAttribute-. |
| ARCCore.REx | ARCCore | Class | REx = 'TooDeepRecursiveDepthException' |
| ARCCore.Subscription.IsMatch Overload1 | ARCCore | ClassMember | Evaluates a query consisting of multiple instances of -Subscription- against a single property stream line. |
| ARCDoc.PKDocAttributeP.PriorityOrder | ARCDoc | EnumMember | Used by -DescribeValue-. |
| ARCCore.REx.Inc | ARCCore | ClassMember | Increases recursive count. |
| ARCCore.Subscription.IsMatch Overload2 | ARCCore | ClassMember | Evaluates this instance of -Subscription- against a single property stream line (which has been split up into its constituent elements). |
| ARCQuery.CompoundKey | ARCQuery | Class | A class able to expand the concept of entity keys. |
| ARCCore.StreamProcessor+StorageFile.Length | ARCCore | ClassMember | Wrongly placed. Belongs to each individual revision file. |
| ARCCore.REx.Dec | ARCCore | ClassMember | This method should be called from inside a 'finally' block, in order to secure its execution, if not then your static recursion depth counter could slowly increase over time due to exceptions ocurring after call to -Inc- but before call to -Dec-. |
| ARCQuery.CompoundKey.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| ARCCore.StreamProcessor+StorageFile.Properties | ARCCore | ClassMember | Key = revision number of file (due to compression / -DataRetention-), like R00001, R00002 and so on. |
| ARCCore.InvalidTypeException | ARCCore | Class | |
| ARCQuery.CompoundKey.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCCore.BaseAttributeP | ARCCore | Enum | Describes class -BaseAttribute-. |
| ARCCore.InvalidTypeException.AssertAssignable | ARCCore | ClassMember | Asserts that expectedType.IsAssignableFrom(foundType) |
| ARCQuery.CompoundKey.Parse | ARCQuery | ClassMember | Note that no TryParse is offered here, because Parse will always succeed (it just returns -CompoundInvalidKey- if 'fails'). |
| ARCCore.BaseAttributeP.Description | ARCCore | EnumMember | The description for the attribute, like this description |
| ARCCore.InvalidTypeException.AssertEquals | ARCCore | ClassMember | Asserts that expectedType.Equals(foundType) |
| ARCQuery.CompoundKey.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCCore.BaseAttributeP.LongDescription | ARCCore | EnumMember | The long (detailed) description for the attribute. |
| ARCCore.TValue | ARCCore | Class | Placeholder for any class type suitable as generic type parameter -PValue-. |
| ARCQuery.CompoundKey.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
| ARCCore.ClassAttributeP | ARCCore | Enum | Describes class -ClassAttribute-. |
| ARCCore.TIP | ARCCore | Class | Placeholder for any class type suitable as generic type parameter restricted to -IP. |
| ARCQuery.CompoundKey.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCCore.ClassAttributeP.AssemblyName | ARCCore | EnumMember | The assembly in which this class resides. |
| ARCCore.TIP.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCQuery.ConstantKey<T> | ARCQuery | Class | Represents a constant expression like "' '", "', '", "42". |
| ARCCore.ClassAttributeP.ClassNamespace | ARCCore | EnumMember | The namespace for -ClassType-. |
| ARCCore.TIP.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCQuery.EntityMethodKey.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCCore.ClassMemberAttributeP.DeclaringType | ARCCore | EnumMember | The actual MemberInfo.DeclaringType. |
| ARCCore.ClassAttributeP.ClassType | ARCCore | EnumMember | The actual type that we are a -ClassAttribute- for |
| ARCQuery.ForeignKey | ARCQuery | Class | Can find related values, through compound field names. |
| ARCCore.ClassMemberAttributeP.MethodName | ARCCore | EnumMember | The actual MemberInfo.Name. |
| ARCCore.ClassAttributeP.BaseTypes | ARCCore | EnumMember | The inheritance hierarchy for this class, starting with base type (excluding 'object').r Not set if class does not inherit any class except 'object' |
| ARCQuery.ForeignKey.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCCore.ClassMemberAttributeP.MethodSignature | ARCCore | EnumMember | The actual MemberInfo.ToString. |
| ARCCore.ClassAttributeP.SubTypes | ARCCore | EnumMember | Direct and indirect sub types of this class. |
| ARCQuery.ForeignKey.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCCore.EnumAttributeP | ARCCore | Enum | Describes class -EnumAttribute-. |
| ARCCore.ClassAttributeP.Interfaces | ARCCore | EnumMember | All interfaces that this class and its base classes implement |
| ARCQuery.ForeignKey.AllForeignKeysForEntityType | ARCQuery | ClassMember | Returns all possible foreign keys relevant for the given entity type, like for Order: 'Customer.FirstName' and 'Customer.LastName'. |
| ARCCore.EnumAttributeP.AssemblyName | ARCCore | EnumMember | The assembly in which this class resides. |
| ARCCore.ClassAttributeP.InterfacesDirectlyImplemented | ARCCore | EnumMember | All interfaces that this class directly implements. |
| ARCQuery.ForeignKey.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| ARCCore.EnumAttributeP.EnumNamespace | ARCCore | EnumMember | The namespace for -EnumType-. |
| ARCCore.ClassAttributeP.CorrespondingEnumType | ARCCore | EnumMember | Only relevant when implements -IP-. |
| ARCQuery.ForeignKey.Steps | ARCQuery | ClassMember | The actual -ForeignKeySingleStep- leading to the -ForeignField-. |
| ARCCore.EnumAttributeP.EnumType | ARCCore | EnumMember | The type of the enum (like type of 'CustomerP' in CustomerP.FirstName) that we are an attribute for |
| ARCCore.ClassAttributeP.BoilerplateCodePropertiesAndStorage | ARCCore | EnumMember | Only relevant when implements -IP- and when a -CorrespondingEnumType- is found. |
| ARCQuery.ForeignKey.StepsAreOnlyDirectionToOne | ARCQuery | ClassMember | If TRUE then -TryGetPInternal) will use much simpler code without collections and parallell executions. |
| ARCCore.EnumAttributeP.AREnumType | ARCCore | EnumMember | Note that will default to -__invalid- if not explicit set. |
| ARCCore.ClassMemberAttributeP | ARCCore | Enum | Describes class -ClassMemberAttribute-. |
| ARCQuery.ForeignKey.ForeignField | ARCQuery | ClassMember | The actual field in the final foreign entity to return value for. |
| ARCCore.ARComponents.ARCDoc | ARCCore | EnumMember | A library supporting documentation and demonstrating usage of AgoRapide. |
| ARCCore.ARConcepts.GettingStarted | ARCCore | EnumMember | AgoRapide 2020 is an open source library for building data-oriented backend applications using .NET. |
| ARCQuery.ForeignKey.AggregateKeys | ARCQuery | ClassMember | Aggregations to be used on the multiple foreign entity values that are found when one of the -Steps- are -ToMany-. |
| ARCCore.ARComponents.ARCQuery | ARCCore | EnumMember | ARCQuery provides a query language that mimicks SQL but is usable through HTTP as GET URLs. |
| ARCCore.ARConcepts.PropertyStream | ARCCore | EnumMember | AgoRapide, the 'streams-of-water' database". |
| ARCQuery.ForeignKey.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
| ARCCore.ARComponents.ARCEvent | ARCCore | EnumMember | ARCEvent contains an -EventSourcing- engine offering a unique -PropertyStream2D- concept where processes (of some business domain) can be expressed in very compact manner through the concept of -IRegHandler-. |
| ARCCore.ARConcepts.PropertyStream2D | ARCCore | EnumMember | PropertyStream2D is an expansion of the -PropertyStream- concept supported by the library -ARCEvent-. |
| ARCQuery.ForeignKey.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCCore.ARComponents.ARCSync | ARCCore | EnumMember | (Not implemented as of March 2020) |
| ARCCore.ARConcepts.EventSourcing | ARCCore | EnumMember | (related to -ARCEvent-). |
| ARCQuery.ForeignKey.IPRelationsKeysPointingTo | ARCQuery | ClassMember | Contains, for each (entity type) key, a list of entity types with foreign keys pointing to that entity type. |
| ARCCore.ARComponents.ARCSec | ARCCore | EnumMember | (Not implemented as of March 2020) |
| ARCCore.ARConcepts.RegStream | ARCCore | EnumMember | The concept in -ARCEvent- of an "axis" (usefully referred to as the vertical axis) within the concept of -PropertyStream2D-. |
| ARCQuery.ForeignKey.IPRelationsKeysPointingFrom | ARCQuery | ClassMember | Contains, for each (entity type) key, a list of entity types which that entity type points to. |
| ARCCore.ARComponents.ARCAPI | ARCCore | EnumMember | A library providing an API on top of the -PropertyStream-. |
| ARCCore.ARConcepts.EventStream | ARCCore | EnumMember | The concept in -ARCEvent- of an "axis" (usefully referred to as the horizontal axis) within the concept of -PropertyStream2D-. |
| ARCQuery.MemberEntityKey | ARCQuery | Class | Can find value for entity which is member of entity being queried. |
| ARCCore.ARComponents.ARAAPI | ARCCore | EnumMember | The corresponding template application for -ARCAPI- demonstrating its usage, providing an HTTP / HTTPS interface with the help of Microsoft.AspNetCore.Mvc. |
| ARCCore.ARConcepts.TransientEventTree | ARCCore | EnumMember | The concept in -ARCEvent- of how an -Event- in the -EventStream- generates transient events which in turn may generate |
| ARCQuery.MemberEntityKey.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCCore.ARConcepts | ARCCore | Enum | The overarching concepts upon which AgoRapide is built. |
| ARCCore.ARConcepts.TaggingOfPropertyKeys | ARCCore | EnumMember | The concept of specifying in a single place all relevant information about a given property (data field). |
| ARCQuery.FunctionKeyAggregateAvg.SyntaxHelp | ARCQuery | ClassMember | 'Avg()' |
| ARCCore.ARConcepts.CoreDBSynchronization | ARCCore | EnumMember | The concept of how multiple -CoreDB- instances synchronizes their data. |
| ARCCore.PKHTMLAttributeP.Encoder | ARCCore | EnumMember | The class doing the HTML-encoding. |
| ARCQuery.FunctionKeyAggregateCount | ARCQuery | Class | Counts the number of properties found. |
| ARCCore.ARConcepts.SingleThreadedCode | ARCCore | EnumMember | Some practical choices have been made in AgoRapide which requires object access to be done in a single-threaded manner, or within a locking context (using for instance -ReaderWriterLockSlim-). |
| ARCCore.PKLogAttributeP | ARCCore | Enum | Describes class -PKLogAttribute. |
| ARCQuery.FunctionKeyAggregateCount.SyntaxHelp | ARCQuery | ClassMember | 'Count()' |
| ARCCore.ARConcepts.DataRetention | ARCCore | EnumMember | The concept of when to delete old data (if deemed necessary). |
| ARCCore.PKLogAttributeP.DoNotLogAtAll | ARCCore | EnumMember | Originates from -DoNotLogAtAll-. |
| ARCQuery.FunctionKeyAggregateDistinct | ARCQuery | Class | Returns a list of the distinct values of the given properties. |
| ARCCore.ARConcepts.NoRealDeletion | ARCCore | EnumMember | AgoRapide has no real concept for deletion of data (apart from -DataRetention-, which is mostly relevant for 'old' data). |
| ARCCore.PKLogAttributeP.CountInterval | ARCCore | EnumMember | For a value of n, log only every n'th time the property is changed. |
| ARCQuery.FunctionKeyAggregateDistinct.SyntaxHelp | ARCQuery | ClassMember | 'Distinct()' |
| ARCCore.ARConcepts.ManyToManyRelations | ARCCore | EnumMember | -ARCQuery- supports many-to-many relations in a simple manner without introducing a third entity type (a third table). |
| ARCCore.PKLogAttributeP.TimeInterval | ARCCore | EnumMember | Specifies a certain time interval for which the property's value shall be sent over the -PropertyStream-. |
| ARCQuery.FunctionKeyAggregateJoin | ARCQuery | Class | Joins the given list of properties into a single property. |
| ARCCore.ARConcepts.Documentation | ARCCore | EnumMember | Thanks to the tagging of enums and classes in AgoRapide (like this description), automatically generation of documentation is possible. |
| ARCCore.PKRelAttributeP | ARCCore | Enum | Describes class -PKRelAttribute-. |
| ARCQuery.FunctionKeyAggregateJoin.SyntaxHelp | ARCQuery | ClassMember | 'Join()' |
| ARCCore.ARConcepts.AssertionsAndDetailedExceptionMessages | ARCCore | EnumMember | The abstraction level in AgoRapide is very high. |
| ARCCore.PKRelAttributeP.ForeignEntity | ARCCore | EnumMember | The type of foreign entity that this property points to. |
| ARCQuery.FunctionKeyAggregateMax | ARCQuery | Class | Calculates the maximum value of the given properties. |
| ARCCore.ARConcepts.ExposingApplicationState | ARCCore | EnumMember | The traditional debugging process usually entails reading through logs and querying about your application state through a debugging tool. |
| ARCCore.PKRelAttributeP.OppositeTerm | ARCCore | EnumMember | Example: For 'Employee', the key 'SupervisorId' where the supervisor is another 'Employee', will have another meaning "as seen from" the Supervisor, namely "Subordinates" or similar. |
| ARCQuery.FunctionKeyAggregateMax.SyntaxHelp | ARCQuery | ClassMember | 'Max()' |
| ARCCore.ARConcepts.LinkInsertionInDocumentation | ARCCore | EnumMember | Documentation with links is much easier to read. |
| ARCCore.PKRelAttributeP.EnforceReferentialIntegrity | ARCCore | EnumMember | If TRUE then referential integrity will be enforced by -TryStore-. |
| ARCQuery.FunctionKeyAggregateMin | ARCQuery | Class | Calculates the minimum value of the given properties. |
| ARCCore.ARConcepts.TryPatternAndNull | ARCCore | EnumMember | AgoRapide uses non-nullable reference types as default throughout the system |
| ARCCore.PKTypeAttributeP | ARCCore | Enum | Describes class -PKTypeAttribute-. |
| ARCQuery.FunctionKeyAggregateMin.SyntaxHelp | ARCQuery | ClassMember | 'Min()' |
| ARCCore.AREnumType | ARCCore | Enum | Categories different types of enum used in AgoRapide. The most important one is -PropertyKeyEnum-. |
| ARCCore.PKTypeAttributeP.Type | ARCCore | EnumMember | The type of this Property. |
| ARCQuery.FunctionKeyAggregateSingle | ARCQuery | Class | Ensures that the given list of properties contains only a single item and returns that item. |
| ARCCore.AREnumType.PropertyKeyEnum | ARCCore | EnumMember | Designates enums that describe relevant values for an 'entity' object like 'Customer'. |
| ARCCore.PKTypeAttributeP.DefaultValue | ARCCore | EnumMember | The default value. |
| ARCQuery.FunctionKeyAggregateSingle.SyntaxHelp | ARCQuery | ClassMember | 'Single()' |
| ARCCore.AREnumType.OrdinaryEnum | ARCCore | EnumMember | Designates "Ordinary" enums used for indicating range of valid values for a given key |
| ARCCore.PKTypeAttributeP.Cardinality | ARCCore | EnumMember | Describes how multiple instances of a property is supposed to be handled. |
| ARCQuery.FunctionKeyAggregateSum | ARCQuery | Class | Sums the given properties. |
| ARCCore.AREnumType.DocumentationOnlyEnum | ARCCore | EnumMember | Designates enums that provide a central repository of explanation of terms that are not present in the C# code. |
| ARCCore.PKTypeAttributeP.IsObligatory | ARCCore | EnumMember | True means value is obligatory. |
| ARCQuery.FunctionKeyAggregateSum.SyntaxHelp | ARCQuery | ClassMember | 'Sum()' |
| ARCCore.ARNodeType | ARCCore | Enum | Describes what function a node in an AgoRapide system serves. A given node may constitute of only -StandardAgoRapideCode- or a combination of -StandardAgoRapideCode- and -ApplicationSpecificCode-. |
| ARCCore.PKTypeAttributeP.BoilerplateCodeProperties | ARCCore | EnumMember | Automatically generated boilerplate code that implements traditional setters and getters for this key. |
| ARCQuery.FunctionKey | ARCQuery | Class | Extracts data from an already existing value like extracting Year from a DateTime in 'Created.Year()'. |
| ARCCore.ARNodeType.CoreDB | ARCCore | EnumMember | A node containing the core or central database. |
| ARCCore.PP | ARCCore | Enum | Describes meta data for any class (property) implementing -IP-. |
| ARCQuery.FunctionKey.TryGetP Overload1 | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCCore.ARNodeType.ArmDB | ARCCore | EnumMember | A node with a 'client -Subscription-' towards -CoreDB- to a (usually) subset of the entire database (acting as a cache and filtering mechanism), or with a 'client -Subscription-' towards -CoreDB- to the whole database (acting as a cache mechanism only) |
| ARCCore.StreamProcessorP.UnderClosure | ARCCore | EnumMember | Set to TRUE if to be closed, whenever an exception occurs or when class goes out of scope |
| ARCQuery.FunctionKey.AddParser | ARCQuery | ClassMember | Adds a -ApplicationSpecificCode- parser. |
| ARCCore.ARNodeType.Client | ARCCore | EnumMember | An outer node / 'end' node with (usually) -ApplicationSpecificCode- but based on -ARADB-. |
| ARCCore.StreamProcessorP.WriteToConsole | ARCCore | EnumMember | If true then incoming data (from other nodes will be written to console. |
| ARCQuery.FunctionKey.TryParse | ARCQuery | ClassMember | Find parsers from -Parsers- based on first word in query. |
| ARCCore.Cardinality | ARCCore | Enum | Describes how multiple instances of a property is supposed to be handled. |
| ARCCore.StreamProcessorP.Timestamp | ARCCore | EnumMember | The timestamp inserted at regular intervals in the -PropertyStream- according to -TimestampResolution-. |
| ARCQuery.FunctionKey.TryParseSingleWord | ARCQuery | ClassMember | Recommended parser to use for functions without parameters. |
| ARCCore.Cardinality.HistoryOnly | ARCCore | EnumMember | The default value. |
| ARCCore.StreamProcessorP.TimestampIsOld | ARCCore | EnumMember | A warning sent by -StreamProcessor- to -OutsideLocalReceiver- when it knows that data as served is out of date. |
| ARCQuery.FunctionKey.TryGetP Overload2 | ARCQuery | ClassMember | Overload which will try to call -TryGetV- with generic type parameter, and if that does not succeed will try to call the optional 'tryParser'. |
| ARCCore.Cardinality.WholeCollection | ARCCore | EnumMember | Values are always set as a whole (there is no need or no meaning in setting or deleting individual items) |
| ARCCore.StreamProcessorP.TimestampResolution | ARCCore | EnumMember | The time interval between each timestamp update in the -PropertyStream-. |
| ARCQuery.FunctionKey.Parsers | ARCQuery | ClassMember | Instances of all the relevant sub classes of -FunctionKey-. |
| ARCCore.Cardinality.IndividualItems | ARCCore | EnumMember | Values are supposed to be set and 'deleted' individually. |
| ARCCore.StreamProcessorP.DoNotStoreLocally | ARCCore | EnumMember | For -Client-, incoming data (as received from a -Outgoing-) is possible to store BOTH to disk, AND to (normally) a -PRich-. |
| ARCQuery.FunctionKeyAbs | ARCQuery | Class | Returns the absolute value of field, like 4 for '-4'. |
| ARCCore.PSPrefix | ARCCore | Enum | Describes some recommended prefixes to use in a -PropertyStreamLine-. |
| ARCCore.StreamProcessorP.DoNotStoreLocalOriginLocally | ARCCore | EnumMember | Means 'do not store local origin locally but wait until it gets confirmed by core storage'. |
| ARCQuery.FunctionKeyAbs.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCCore.PSPrefix.dt | ARCCore | EnumMember | Data, single key + value. |
| ARCCore.StreamProcessorP.CacheDiskWrites | ARCCore | EnumMember | If TRUE then will write the -PropertyStream- to disk in bigger chunks, thereby increasing performance. |
| ARCQuery.FunctionKeyAbs.SyntaxHelp | ARCQuery | ClassMember | 'Abs()' |
| ARCCore.PSPrefix.dtr | ARCCore | EnumMember | Data, whole records. |
| ARCCore.StreamProcessorP.CopyFileStructureFromCore | ARCCore | EnumMember | If TRUE, will copy the exact file structure (through information given in -ClientUpdatePosition-). |
| ARCQuery.FunctionKeyDate | ARCQuery | Class | Formats a date without time component. |
| ARCCore.PSPrefix.RS | ARCCore | EnumMember | RS = Registration Stream (see -RegStream-). |
| ARCCore.StreamProcessorP.CountIncomingConnections | ARCCore | EnumMember | |
| ARCQuery.FunctionKeyDate.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCCore.PSPrefix.ES | ARCCore | EnumMember | ES = Event Stream (see -EventStream-). |
| ARCCore.StreamProcessorP.CountOutgoingConnections | ARCCore | EnumMember | |
| ARCQuery.FunctionKeyDate.SyntaxHelp | ARCQuery | ClassMember | 'Date()' |
| ARCCore.PSPrefix.cmd | ARCCore | EnumMember | Command. |
| ARCCore.StreamProcessorP.CountOutsideLocalReceiver | ARCCore | EnumMember | Count of calls to -OutsideLocalReceiver-. |
| ARCQuery.FunctionKeyDayOfWeek | ARCQuery | Class | Extracts DayOfWeek from field like 'Monday', 'Tuesday' and so on. |
| ARCCore.PSPrefix.app | ARCCore | EnumMember | Application state, like app/ |
| ARCCore.StreamProcessorP.CountReceiveLocalOrigin | ARCCore | EnumMember | Count of -PropertyStreamLine- with -HasLocalOrigin-. |
| ARCQuery.FunctionKeyDayOfWeek.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCCore.PSPrefix.doc | ARCCore | EnumMember | Documentation. |
| ARCCore.StreamProcessorP.CountReceiveNonLocalOrigin | ARCCore | EnumMember | Count of -PropertyStreamLine- not with -HasLocalOrigin-. |
| ARCQuery.FunctionKeyDayOfWeek.SyntaxHelp | ARCQuery | ClassMember | 'DayOfWeek()' |
| ARCCore.PSPrefix.t | ARCCore | EnumMember | Translations. |
| ARCCore.StorageFileP | ARCCore | Enum | Describes class -StorageFile-. |
| ARCQuery.FunctionKeyDouble | ARCQuery | Class | Converts an integer to a double (decimal value). |
| ARCCore.PKHTMLAttributeP | ARCCore | Enum | Describes class -PKRelAttribute-. |
| ARCCore.StorageFileP.Filename | ARCCore | EnumMember | |
| ARCQuery.FunctionKeyTotalMinutes | ARCQuery | Class | Converts a timespan to total minutes (as an integer). |
| ARCCore.ActualConnectionP.ErrorConditionData | ARCCore | EnumMember | Detailed explanation about -IsErrorCondition- |
| ARCDoc.DocFrag.ToHTMLSimpleSingle | ARCDoc | ClassMember | Alternative ('override') to -ToHTMLSimpleSingle-. |
| ARCQuery.FunctionKeyTotalMinutes.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCCore.ActualConnectionP.UnderClosure | ARCCore | EnumMember | Set to TRUE if to be closed and reinitialized. |
| ARCDoc.DocFrag.TryGetP | ARCDoc | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCQuery.FunctionKeyTotalMinutes.SyntaxHelp | ARCQuery | ClassMember | 'TotalMinutes()' |
| ARCCore.ActualConnectionP.MonkeyWrench | ARCCore | EnumMember | |
| ARCDoc.DocFrag.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCQuery.FunctionKeyType | ARCQuery | Class | Returns the type of a property. |
| ARCCore.ActualConnectionP.PartnerIPAddress | ARCCore | EnumMember | TODO: Use more strongly typing for this. |
| ARCDoc.DocFrag.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCQuery.FunctionKeyType.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCCore.ConnectionInstructionP | ARCCore | Enum | Describes class -ConnectionInstruction-. |
| ARCDoc.DocFragCollection | ARCDoc | Class | Contains a collection of -DocFrag- objects. |
| ARCQuery.FunctionKeyType.SyntaxHelp | ARCQuery | ClassMember | 'Type()' |
| ARCCore.ConnectionInstructionP.ClientId | ARCCore | EnumMember | The AgoRapide node-id for which this connection is relevant. Used for distributing over the -PropertyStream- information to the clients about which possible nodes they can connect to. |
| ARCDoc.DocFragCollection.Create | ARCDoc | ClassMember | Creates documentation fragments (-DocFrag-) for all possible -BaseAttribute- elements found in the given assemblies. |
| ARCQuery.FunctionKeyWeek | ARCQuery | Class | Extract week-number from field according to ISO 8601. |
| ARCCore.ConnectionInstructionP.ServerHostName | ARCCore | EnumMember | The host (DNS or IP-address) for which to connect. |
| ARCDoc.DocFragCollection.TryGetP | ARCDoc | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCQuery.FunctionKeyWeek.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCCore.ConnectionInstructionP.ServerPortNo | ARCCore | EnumMember | The port number for which to connect. |
| ARCDoc.DocFragCollection.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCQuery.FunctionKeyWeek.SyntaxHelp | ARCQuery | ClassMember | 'Week()' |
| ARCCore.ConnectionInstructionP.ConnectionId | ARCCore | EnumMember | Usually a combination of -ClientId-, -ServerHostName- and -ServerPortNo-. |
| ARCDoc.DocFragCollection.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCQuery.FunctionKeyYear | ARCQuery | Class | Extracts Year-component from field. |
| ARCCore.ConnectionInstructionP.DataTransferDirection | ARCCore | EnumMember | |
| ARCDoc.DocLink | ARCDoc | Class | Describes to where a single HTML link points. |
| ARCQuery.FunctionKeyYear.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCCore.ConnectionInstructionP.Subscription | ARCCore | EnumMember | The actual subscripton. This is what the connecting party / (downstream) client would send over its TCP/IP connection to the (upstream) server. |
| ARCDoc.DocLink.TryGetP | ARCDoc | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCQuery.FunctionKeyYear.SyntaxHelp | ARCQuery | ClassMember | 'Year()' |
| ARCCore.ConnectionInstructionP.MultipleConnectionUsage | ARCCore | EnumMember | |
| ARCDoc.DocLink.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCQuery.FunctionKeyYearMonth | ARCQuery | Class | Extracts Year + Month component from field like 2020-06. |
| ARCCore.ConnectionInstructionP.Sharding | ARCCore | EnumMember | |
| ARCDoc.DocLink.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCQuery.FunctionKeyYearMonth.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCCore.MultipleConnectionUsage | ARCCore | Enum | Enables fault-tolerance by describing use of multiple connections |
| ARCDoc.DocLink.Location | ARCDoc | ClassMember | Copy of -Location-. |
| ARCQuery.FunctionKeyYearMonth.SyntaxHelp | ARCQuery | ClassMember | 'YearMonth()' |
| ARCCore.MultipleConnectionUsage.Admin | ARCCore | EnumMember | Connection is a special administrative connection to a central 'command-and-control' server which instructs which connections to make. |
| ARCDoc.DocLink.Filename | ARCDoc | ClassMember | Copy of -LinkWordHTML-. |
| ARCQuery.FunctionKeyYearQuarter | ARCQuery | Class | Extracts Year + Quarter component from field like 2020Q1. |
| ARCCore.MultipleConnectionUsage.RoundRobin | ARCCore | EnumMember | This connection to be used in a turn based system, together with other connections with -RoundRobin-. |
| ARCDoc.DocLink.LinkWordHTML | ARCDoc | ClassMember | Copy of -LinkWordHTML-. |
| ARCQuery.NewKeyGetType.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCCore.StorageFileP.Hash | ARCCore | EnumMember | Hash of storage file. Not implemented as of Apr 2020. It is envisaged to store hash-value as last line in storage file. In this case the hash must be the hash of the file excluding the last line |
| ARCDoc.UtilDoc.GlobalHeaderHTML | ARCDoc | ClassMember | Global header to be inserted at the top of every HTML page created by -GenerateHTMLPage-. |
| ARCQuery.NewKeyGetType.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| ARCCore.ConnectionDirection | ARCCore | Enum | The concept of who took the initiative for the connections (who asked to open the TCP/IP session). |
| ARCDoc.HTOC+ParentChain | ARCDoc | Class | Used by -FilterNode- in order to keep track of node's parents. |
| ARCQuery.NewKeyGetType.SyntaxHelp | ARCQuery | ClassMember | 'GetType()' |
| ARCCore.ConnectionDirection.Incoming | ARCCore | EnumMember | ConnectionInstruction will not be set for these. |
| ARCDoc.AppleP | ARCDoc | Enum | Describes class -Apple-. |
| ARCQuery.NewKeyGetType.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
| ARCCore.ConnectionDirection.Outgoing | ARCCore | EnumMember | There would normally exist two live outgoing connection at a given point in time for -Client- / -ArmDB-: |
| ARCDoc.AppleP.Name | ARCDoc | EnumMember | The name of the apple |
| ARCQuery.NewKeyGetType.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCCore.DataTransferDirection | ARCCore | Enum | Direction for transfer of data. |
| ARCDoc.AppleP.Colour | ARCDoc | EnumMember | |
| ARCQuery.NewKeyToPropertyStream | ARCQuery | Class | Returns the -PropertyStream- representation of the given object. |
| ARCCore.DataTransferDirection.Send | ARCCore | EnumMember | Like -Client- sending in-application generated properties to -ArmDB- / -CoreDB- or -ArmDB- sending data received over an incoming connection to -CoreDB-. |
| ARCDoc.BananaP | ARCDoc | Enum | Describes class -Banana-. |
| ARCQuery.NewKeyToPropertyStream.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCCore.DataTransferDirection.Receive | ARCCore | EnumMember | Like -Client- receiving data from an upstream -ArmDB- / -CoreDB- or -ArmDB- receiving data from an upstream -CoreDB-. |
| ARCDoc.BananaP.Name | ARCDoc | EnumMember | The name of the banana |
| ARCQuery.NewKeyToPropertyStream.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCCore.TPropertyKeyEnum | ARCCore | Enum | Placeholder for any enum type suitable as generic type parameter for -PExact-. |
| ARCDoc.BananaP.Colour | ARCDoc | EnumMember | |
| ARCQuery.NewKeyToPropertyStream.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| Assembly ARCDoc | Assembly | A library supporting documentation and demonstrating usage of AgoRapide. | |
| ARCDoc.OrangeP | ARCDoc | Enum | Describes class -Orange-. |
| ARCQuery.NewKeyToPropertyStream.SyntaxHelp | ARCQuery | ClassMember | 'ToPropertyStream()' |
| ARCDoc.Apple | ARCDoc | Class | The most 'standard' way of implementing an entity-class in AgoRapide, by just inheriting -PRich-. |
| ARCDoc.OrangeP.Name | ARCDoc | EnumMember | The name of the orange |
| ARCQuery.NewKeyToPropertyStream.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
| ARCDoc.Apple.AddName | ARCDoc | ClassMember | Convenience method, not obligatory. |
| ARCDoc.OrangeP.Colour | ARCDoc | EnumMember | |
| ARCQuery.NewKeyToPropertyStream.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCDoc.Apple.GetName | ARCDoc | ClassMember | Convenience method, not obligatory. |
| ARCDoc.SomeAppComponentP | ARCDoc | Enum | Describes class -SomeAppComponent-. |
| ARCQuery.QuantileKey | ARCQuery | Class | Can separate entities into quantiles, like Quartiles, Quintiles or Sextiles. |
| ARCDoc.Apple.TryGetName | ARCDoc | ClassMember | Convenience method, not obligatory. |
| ARCDoc.SomeAppComponentP.SomeCountValue | ARCDoc | EnumMember | |
| ARCQuery.QuantileKey.TryGetP | ARCQuery | ClassMember | Returns an integer with the number of the quantile group for the value returned by the given -CompoundKey-). |
| ARCDoc.Apple.TryGetP | ARCDoc | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCDoc.SomeAppComponentP.SomeCountValueNotToBeLogged | ARCDoc | EnumMember | |
| ARCQuery.QuantileKey.TryParse | ARCQuery | ClassMember | Note that any value (positive integer greated than 2) is accepted, not necessarily only string-representations of enums within -Quantile-. |
| ARCDoc.Apple.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCDoc.DocFragP | ARCDoc | Enum | Describes class -DocFrag-. |
| ARCQuery.Query | ARCQuery | Class | Keeps track of progress of query, and the interim result. |
| ARCDoc.Apple.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.DocFragP.DocFragType | ARCDoc | EnumMember | |
| ARCQuery.Query.ShouldTerminate | ARCQuery | ClassMember | Attempts to explain problem, in -TerminateReason- and by logging. |
| ARCDoc.Demonstrator.DemonstrateITypeDescriber | ARCDoc | ClassMember | Demonstrates use of -ITypeDescriber- for describing single-property values. |
| ARCDoc.DocFragP.Attribute | ARCDoc | EnumMember | The -BaseAttribute- or -PK- from which this -DocFrag- originates. |
| ARCQuery.Query.ExecuteOne | ARCQuery | ClassMember | NOTE: Note how avoids deferred execution in order to always correctly time execution of each query element separately. |
| ARCDoc.Demonstrator.DemonstratePRichHierarchicalStorage | ARCDoc | ClassMember | Demonstrates use of -PRich-, how it receives -PropertyStream--lines and builds up a strongly typed hierarchical object storage. |
| ARCDoc.DocFragType | ARCDoc | Enum | Type of documentation fragment, like -Assembly-, -Class- or -ClassMember-. |
| ARCQuery.Query.AllLogEntriesForThisQuery | ARCQuery | ClassMember | Temporary storage of log information. |
| ARCDoc.Demonstrator.DemonstratePropertyStream | ARCDoc | ClassMember | Demonstrates use of -PropertyStream- by generating local data (documentation data) and writing locally to console. |
| ARCDoc.DocFragType.Assembly | ARCDoc | EnumMember | |
| ARCQuery.Query.Progress | ARCQuery | ClassMember | Use of member class in order for -Query- not to inherit -IP-. |
| ARCDoc.Demonstrator.DemonstrateBareBonesClient | ARCDoc | ClassMember | Demonstrates adding -PropertyStream--lines to -CoreDB- without using ANY AgoRapide component, only standard TCP/IP functionality in .NET. |
| ARCDoc.DocFragType.Namespace | ARCDoc | EnumMember | |
| ARCQuery.QueryExpression | ARCQuery | Class | Represents part of a query (or actually a transformation) against a given collection and the data storage from which it was taken. |
| ARCDoc.Demonstrator.DemonstrateLogConsole | ARCDoc | ClassMember | Demonstrates a quite simple log console. |
| ARCDoc.DocFragType.Class | ARCDoc | EnumMember | Does also include interfaces. |
| ARCQuery.QueryExpression.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCDoc.Demonstrator.DemonstrateStreamProcessorAsClient | ARCDoc | ClassMember | Demonstrates use of -StreamProcessor- as a general client. |
| ARCDoc.DocFragType.ClassMember | ARCDoc | EnumMember | |
| ARCQuery.QueryExpression.AddParser | ARCQuery | ClassMember | Adds a -ApplicationSpecificCode- parser. |
| ARCDoc.Orange | ARCDoc | Class | Inherits -PExact- for probably the best compromise between memory consumption and easy of development. |
| ARCDoc.DocFragType.Enum | ARCDoc | EnumMember | |
| ARCQuery.QueryExpression.TryParse | ARCQuery | ClassMember | Find parsers from -Parsers- based on first word in query. |
| ARCDoc.Orange.SetPVDirect | ARCDoc | ClassMember | High performance alternative to -TrySetP-, accessing -Storage- more direct. |
| ARCDoc.DocFragType.EnumMember | ARCDoc | EnumMember | |
| ARCQuery.QueryExpression.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCDoc.DocLinkP | ARCDoc | Enum | Describes class -DocLink-. |
| ARCQuery.QueryExpression.Parsers | ARCQuery | ClassMember | Parsers for all the relevant sub classes of -QueryExpression-. |
| ARCDoc.DocLinkP.Location | ARCDoc | EnumMember | The location that this link points to. |
| ARCQuery.QueryExpressionWithSuggestions | ARCQuery | Class | Keeps track as each query item gets executed. |
| ARCDoc.DocLinkP.Filename | ARCDoc | EnumMember | |
| ARCQuery.QueryExpressionWithSuggestions.Previous | ARCQuery | ClassMember | Suggestion for a 'browse backwards' button. |
| ARCDoc.DocLinkP.LinkWordHTML | ARCDoc | EnumMember | Actual link as it is expected to occur in text, like '-MyCustomerClass<T>-'. |
| ARCQuery.QueryExpressionWithSuggestions.Next | ARCQuery | ClassMember | Suggestion for a 'browse forwards' button. |
| ARCDoc.DocLinkResolutionP | ARCDoc | Enum | Describes class -DocLinkResolution- |
| ARCQuery.QueryExpressionAggregate | ARCQuery | Class | Aggregates over the given key. |
| ARCDoc.DocLinkResolutionP.LinkWord | ARCDoc | EnumMember | |
| ARCQuery.QueryExpressionAggregate.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCDoc.DocLinkResolutionP.DocLinks | ARCDoc | EnumMember | The possible links for -LinkWord- |
| ARCQuery.QueryExpressionAggregate.IsSuitableAggregator | ARCQuery | ClassMember | Returns true if |
| ARCDoc.DocumentatorP | ARCDoc | Enum | Describes class -Documentator-. |
| ARCQuery.QueryExpressionLog.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCDoc.PriorityOrder | ARCDoc | Enum | Used for general sorting / prioritizing when showing properties for an entity. |
| ARCQuery.QueryExpressionLog.SyntaxHelp | ARCQuery | ClassMember | 'Log'. |
| ARCDoc.PriorityOrder.NotImportant | ARCDoc | EnumMember | |
| ARCQuery.QueryExpressionOrderBy | ARCQuery | Class | Orders collection. |
| ARCDoc.PriorityOrder.Important | ARCDoc | EnumMember | |
| ARCQuery.QueryExpressionOrderBy.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| Assembly ARCQuery | Assembly | ARCQuery provides a query language that mimicks SQL but is usable through HTTP as GET URLs. | |
| ARCQuery.QueryExpressionOrderBy.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.BinaryOperatorKey | ARCQuery | Class | Offers expressions with operators like +, -, * and /. |
| ARCQuery.QueryExpressionOrderBy.SyntaxHelp | ARCQuery | ClassMember | ORDER BY {key} [DESC] / [ASC] |
| ARCQuery.BinaryOperatorKey.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCQuery.QueryExpressionPivot | ARCQuery | Class | Creates a table by querying over two keys like |
| ARCQuery.BinaryOperatorKey.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCQuery.QueryExpressionPivot.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.BinaryOperatorKey.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| ARCQuery.QueryExpressionPivot.GetCrossSummationChecker | ARCQuery | ClassMember | Returns a cross sum checker for int, long, double, Timespan. |
| ARCQuery.BinaryOperatorKey.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
| ARCQuery.QueryExpressionPivot.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.BinaryOperatorKey.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCQuery.QueryExpressionPivot.SyntaxHelp | ARCQuery | ClassMember | 1) 'PIVOT {rowKey} BY {columnKey}' like "PIVOT Colour BY Production.Year" |
| ARCQuery.CompoundInvalidKey | ARCQuery | Class | Used as a practical solution in order to know that a given key has been attemped parsed, but was not valid. |
| ARCQuery.QueryExpressionPivot.AggregationType | ARCQuery | ClassMember | Most common value is -Count-, in which case -AggregationKey- may be correspondingly set to null. |
| ARCQuery.CompoundInvalidKey.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCQuery.QueryExpressionPivot.AggregationKey | ARCQuery | ClassMember | This is often null (with -AggregationType- correspondingly set to Count-). |
| ARCQuery.CompoundInvalidKey.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCQuery.QueryExpressionRel | ARCQuery | Class | Enables 'jumping' or 'travelling' from a collection of one entity type to another (related) entity type. |
| ARCQuery.CompoundInvalidKey.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| ARCQuery.QueryExpressionRel.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.CompoundInvalidKey.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
| ARCQuery.QueryExpressionRel.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.CompoundInvalidKey.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCQuery.QueryExpressionRel.SyntaxHelp | ARCQuery | ClassMember | 'REL {type}' |
| ARCQuery.ConstantKey<T>.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCQuery.QueryExpressionRel.StrType | ARCQuery | ClassMember | In the simplest terms, the -ToStringVeryShort- representation of the type that we are 'jumping' to. |
| ARCQuery.ConstantKey<T>.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCQuery.QueryExpressionSelect | ARCQuery | Class | Selects which fields to include. |
| ARCQuery.ConstantKey<T>.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| ARCQuery.QueryExpressionSelect.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.ConstantKey<T>.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
| ARCQuery.QueryExpressionSelect.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.ConstantKey<T>.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCQuery.QueryExpressionSelect.SyntaxHelp | ARCQuery | ClassMember | SELECT {field-1}, {field-2} ... {field-n} |
| ARCQuery.EntityMethodKey | ARCQuery | Class | Key able to call read-only methods defined in the entity class with names like 'TryGet{FieldName}'. |
| ARCQuery.QueryExpressionSelfCreate | ARCQuery | Class | Returns self created collection from given class type. |
| ARCQuery.EntityMethodKey.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCQuery.QueryExpressionSelfCreate.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.EntityMethodKey.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCQuery.QueryExpressionSelfCreate.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.EntityMethodKey.AllEntityMethodKeysForEntityTypeDict | ARCQuery | ClassMember | Returns all -EntityMethodKey- in the class definition of the given entity type. |
| ARCQuery.QueryExpressionSelfCreate.SyntaxHelp | ARCQuery | ClassMember | SELFCREATE {Type supporting ISelfCreateCollection}' |
| ARCQuery.EntityMethodKey.AllEntityMethodKeysForEntityTypeList | ARCQuery | ClassMember | Returns List sorted by Method Name of Value of Dictionary returned by -AllEntityMethodKeysForEntityTypeDict- |
| ARCQuery.QueryExpressionShuffle | ARCQuery | Class | Shuffles collection in random order. |
| ARCQuery.EntityMethodKey.TryGetForeignField | ARCQuery | ClassMember | Returns foreign field through foreign key given. |
| ARCQuery.QueryExpressionShuffle.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.EntityMethodKey.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| ARCQuery.QueryExpressionShuffle.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.EntityMethodKey.Method | ARCQuery | ClassMember | The actuall TryGet method implemented in the relevant entity class. |
| ARCQuery.QueryExpressionShuffle.SyntaxHelp | ARCQuery | ClassMember | SHUFFLE |
| ARCQuery.EntityMethodKey.MethodNameAsIK | ARCQuery | ClassMember | Name of TryGet method but without 'TryGet' in name |
| ARCQuery.QueryExpressionSkip | ARCQuery | Class | Skips the specified number of elements from the current query result. |
| ARCQuery.EntityMethodKey.ReturnType | ARCQuery | ClassMember | The type of the 'retval' out-parameter of the method. |
| ARCQuery.QueryExpressionSkip.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.EntityMethodKey.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
| ARCQuery.QueryProgress.DataStorage | ARCQuery | ClassMember | Note how this property will point to the hierarhical level in the data storage from which the first -QueryExpression- was found in the query string. |
| ARCQuery.MemberEntityKey.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCQuery.QueryProgress.Result | ARCQuery | ClassMember | This gets updated continously as the different query expressions get evaluated. |
| ARCQuery.MemberEntityKey.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| ARCQuery.QueryProgress.ExecutedQueries | ARCQuery | ClassMember | The result from calling -Execute- for each query in -Queries-. |
| ARCQuery.MemberEntityKey.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
| ARCQuery.QueryProgress.AdditionalJavascriptUrlEncoder | ARCQuery | ClassMember | Returns the Javascript code for converting characters that are difficult to pass in URLs to a format understood by -Decode-. |
| ARCQuery.MemberEntityKey.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCQuery.Translations | ARCQuery | Class | Offers a very simple system for keeping track of translation between different ("western") languages. |
| ARCQuery.OrdinaryKeyPlusFunctionOrQuantile | ARCQuery | Class | A -CompoundKey- containing some function keys or quantile key operating on an existing property of the entity in question. |
| ARCQuery.Translations.ToString | ARCQuery | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCQuery.OrdinaryKeyPlusFunctionOrQuantile.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCQuery.TranslationsCollection | ARCQuery | Class | This would consist of one key per language, with keys like "de_DE", "fr_FR", "nb_NO". |
| ARCQuery.OrdinaryKeyPlusFunctionOrQuantile.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCQuery.TranslationsCollection.TrySetPP | ARCQuery | ClassMember | Replaces default interface method -TrySetPP-. |
| ARCQuery.OrdinaryKeyPlusFunctionOrQuantile.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| ARCQuery.TranslationsCollection.GetKeysEqualToValue | ARCQuery | ClassMember | Returns properties which themselves again have key and value equal to the given key and value. |
| ARCQuery.OrdinaryKeyPlusFunctionOrQuantile..ctor | ARCQuery | ClassMember | Note that calling only this constructor without afterwards setting -FunctionKeys- and / or -QuantileKey- would be meaningless. |
| ARCQuery.TranslationsCollection.TryGetP | ARCQuery | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCQuery.OrdinaryKeyPlusFunctionOrQuantile.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
| ARCQuery.TranslationsCollection.TryGetV | ARCQuery | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCQuery.OrdinaryKeyPlusFunctionOrQuantile.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCQuery.TranslationsCollection.ToString | ARCQuery | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCQuery.Extensions | ARCQuery | Class | |
| ARCQuery.TranslationSingle | ARCQuery | Class | Describes a single translation. |
| ARCQuery.Extensions.TryGetP | ARCQuery | ClassMember | Same functionality as -TryGetP- but understands the concept of -CompoundKey-. |
| ARCQuery.TranslationSingle.TryGetReferenceCount | ARCQuery | ClassMember | Method signature understood by -TryGetP- / -EntityMethodKey-. |
| ARCQuery.FunctionKeyAggregate | ARCQuery | Class | Operates over a collection of properties. |
| ARCQuery.TranslationSingle.TryGetPS | ARCQuery | ClassMember | Returns a -PropertyStreamLine- representation of this translation. |
| ARCQuery.FunctionKeyAggregate.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.TranslationSingle.TryGetA | ARCQuery | ClassMember | Returns a -PropertyStreamLine- representation of this translation. |
| ARCQuery.FunctionKeyAggregateAvg | ARCQuery | Class | Calculates the average of the given properties. |
| ARCQuery.TranslationSingle.TryGetMacro | ARCQuery | ClassMember | Returns a -PropertyStream- representation of this translation. |
| ARCQuery.FunctionKeyDouble.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.TranslationSingle.TryGetP | ARCQuery | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCQuery.FunctionKeyDouble.SyntaxHelp | ARCQuery | ClassMember | 'Double()' |
| ARCQuery.TranslationSingle.TryGetV | ARCQuery | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCQuery.FunctionKeyFirstLine | ARCQuery | Class | Extracts first line from string of text. |
| ARCQuery.TranslationSingle.ToString | ARCQuery | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCQuery.FunctionKeyFirstLine.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.TranslationSingle.ReferenceCount | ARCQuery | ClassMember | May be set from outside, for instance with System.Threading.Interlocked.Increment. |
| ARCQuery.FunctionKeyFirstLine.SyntaxHelp | ARCQuery | ClassMember | 'FirstLine()' |
| ARCQuery.UtilQuery | ARCQuery | Class | Utility methods for -ARCQuery-. |
| ARCQuery.FunctionKeyVeryShort | ARCQuery | Class | Returns the -ToStringVeryShort- representation of the given type. |
| ARCQuery.UtilQuery.IndexOfOutsideOf | ARCQuery | ClassMember | Equivalent to string.IndexOf except that any character encountered inside pairs of the 'outsideOf'-char are not counted. |
| ARCQuery.FunctionKeyVeryShort.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.UtilQuery.IndexOfAnyOutsideOf | ARCQuery | ClassMember | Equivalent to string.IndexOfAny except that any character encountered inside pairs of the 'outsideOf'-char are not counted. |
| ARCQuery.FunctionKeyVeryShort.SyntaxHelp | ARCQuery | ClassMember | 'VeryShort()' |
| ARCQuery.FunctionKeyHourMinute | ARCQuery | Class | Formats a timespan with only the hour and minute part. Uses format hh:mm. |
| ARCQuery.FunctionKeyHourMinute.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCDoc.Orange.GetPVDirect | ARCDoc | ClassMember | High performance alternative to -TryGetP-, accessing -Storage- more direct. |
| ARCQuery.FunctionKeyHourMinute.SyntaxHelp | ARCQuery | ClassMember | 'HourMinute()' |
| ARCDoc.Orange.TryGetPVDirect | ARCDoc | ClassMember | High performance alternative to -TryGetP-, accessing -Storage- more direct. |
| ARCQuery.FunctionKeyInt | ARCQuery | Class | Rounds a double value to the nearest integer (uses .NET data type Int64 (long)). |
| ARCDoc.Orange.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCQuery.FunctionKeyInt.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCDoc.Orange.Name | ARCDoc | ClassMember | See -Name- for more information. |
| ARCQuery.FunctionKeyInt.SyntaxHelp | ARCQuery | ClassMember | 'Int()' |
| ARCDoc.Orange.Storage | ARCDoc | ClassMember | Uses int-value of -__enum- minus 1 as index. |
| ARCQuery.FunctionKeyLength | ARCQuery | Class | Returns length of (string) value of field, like 4 for 'John'. |
| ARCDoc.SomeAppComponent | ARCDoc | Class | Demonstrates how also your actual application classes, not only your data classes, should implement -IP-. |
| ARCQuery.FunctionKeyLength.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCDoc.SomeAppComponent.MethodC | ARCDoc | ClassMember | Note structured format in logging. |
| ARCQuery.FunctionKeyLength.SyntaxHelp | ARCQuery | ClassMember | 'Length()' |
| ARCDoc.SomeAppComponent.MethodD | ARCDoc | ClassMember | Same as MethodC- but returns data ('Func<string>()' instead of 'Action()') |
| ARCQuery.FunctionKeyMonth | ARCQuery | Class | Extracts month component from field like '2020-12-09' becoming '12'. |
| ARCDoc.DocLinkCollection.TryGetP | ARCDoc | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCQuery.FunctionKeyMonth.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCDoc.DocLinkCollection.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCQuery.FunctionKeyMonth.SyntaxHelp | ARCQuery | ClassMember | 'Month()' |
| ARCDoc.DocLinkCollection.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCQuery.FunctionKeyQuarter | ARCQuery | Class | Extracts quarter component from datetime field like '2020-12-09' becoming 'Q4'. |
| ARCDoc.DocLinkResolution | ARCDoc | Class | Contains a resolution page for a link word which has duplicate 'targets' (pointing to multiple -DocLink- instances). |
| ARCQuery.FunctionKeyQuarter.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCDoc.DocLinkResolution.ToHTMLSimpleSingle | ARCDoc | ClassMember | Gives a friendly description about possible targets for LinkWord-. |
| ARCQuery.FunctionKeyQuarter.SyntaxHelp | ARCQuery | ClassMember | 'Quarter()' |
| ARCDoc.DocLinkResolution.TryGetP | ARCDoc | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCQuery.FunctionKeyShort | ARCQuery | Class | 'Smart' way of showing time. Removes unnecessary information. |
| ARCDoc.DocLinkResolution.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCQuery.FunctionKeyShort.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCDoc.DocLinkResolution.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCQuery.FunctionKeyShort.SyntaxHelp | ARCQuery | ClassMember | 'Short()' |
| ARCDoc.DocLinkResolutionCollection | ARCDoc | Class | Contains a collection of -DocLinkResolution- objects. |
| ARCQuery.FunctionKeyTMB | ARCQuery | Class | TMB = Thousands, Millions, Billions. |
| ARCDoc.DocLinkResolutionCollection.TryGetP | ARCDoc | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCQuery.FunctionKeyTMB.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCDoc.DocLinkResolutionCollection.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCQuery.FunctionKeyTMB.SyntaxHelp | ARCQuery | ClassMember | 'TMB()' |
| ARCDoc.DocLinkResolutionCollection.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCQuery.FunctionKeyTotalHours | ARCQuery | Class | Converts a timespan to total hours (as an integer). |
| ARCDoc.Documentator | ARCDoc | Class | General class for documenting AgoRapide and also your own -ApplicationSpecificCode-. |
| ARCQuery.FunctionKeyTotalHours.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCDoc.Documentator.CreateAndInsert | ARCDoc | ClassMember | Creates an instance of -Documentator- with a natural hierarchical representation of documentation attributes found in the given assemblies. |
| ARCQuery.FunctionKeyTotalHours.SyntaxHelp | ARCQuery | ClassMember | 'TotalHours()' |
| ARCDoc.Documentator.ToHTMLSimpleSingle | ARCDoc | ClassMember | Alternative ('override') to -ToHTMLSimpleSingle-. |
| ARCQuery.FunctionKeyYearQuarter.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCDoc.Documentator.CreateHTOCStandard | ARCDoc | ClassMember | Creates a 'standard' table of contents, structured by assembly and each assembly divided into 'Class' and 'Enum'. |
| ARCQuery.FunctionKeyYearQuarter.SyntaxHelp | ARCQuery | ClassMember | 'YearQuarter()' |
| ARCDoc.DummyEnum.TryGetP | ARCDoc | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCQuery.FunctionKeyYearWeek | ARCQuery | Class | Extract year and week number from field according to ISO 8601 like '2021-51' |
| ARCDoc.DummyEnum.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCQuery.FunctionKeyYearWeek.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCDoc.DummyEnum.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCQuery.FunctionKeyYearWeek.SyntaxHelp | ARCQuery | ClassMember | 'YearWeek()' |
| ARCDoc.Extensions | ARCDoc | Class | Contains various extension methods for -IP- and -IKIP- related to documentating / reporting / HTML. |
| ARCQuery.NewKey | ARCQuery | Class | A function creating new keys (new fields) that can be used against all object types in AgoRapide (against all entities). |
| ARCDoc.Extensions.ToHTMLSimpleSingleRecursive | ARCDoc | ClassMember | Calls -ToHTMLSimpleSingle- recursively. |
| ARCQuery.NewKey.AddParser | ARCQuery | ClassMember | Adds an -ApplicationSpecificCode- parser. |
| ARCDoc.Extensions.ToHTMLSimpleSingle | ARCDoc | ClassMember | Creates a simple HTML representation of the given parameter. |
| ARCQuery.NewKey.TryParse | ARCQuery | ClassMember | Find parsers from -Parsers- based on first word in query. |
| ARCDoc.Extensions.ToHTMLSimpleSingleInternal | ARCDoc | ClassMember | Hack in order to escape check for direct implementation in actual class of -ToHTMLSimpleSingle- in -ToHTMLSimpleSingle-. |
| ARCQuery.NewKey.TryParseSingleWord | ARCQuery | ClassMember | Recommended parser to use for functions without parameters. |
| ARCDoc.Extensions.ToHTMLSimpleAsTableRow | ARCDoc | ClassMember | Creates a simple HTML representation of the given parameter as a single two column row (Key, Value) in a table. |
| ARCQuery.NewKey.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| ARCDoc.Extensions.DescribeValue | ARCDoc | ClassMember | Describes the value contained withing an -IKIP- (-P-). |
| ARCQuery.NewKey.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCDoc.Extensions.ValueToHTMLSimpleWithTooltip | ARCDoc | ClassMember | Creates a simple HTML representation of the Value with description as a 'tooltip'. |
| ARCQuery.NewKey.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCDoc.Extensions.KeyToHTMLSimpleWithTooltip | ARCDoc | ClassMember | Creates a simple HTML representation of the Key with description as a 'tooltip'. |
| ARCQuery.NewKey.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
| ARCDoc.Extensions.GetHelptextHTML | ARCDoc | ClassMember | Returns content of -Description- and -LongDescription-. |
| ARCQuery.NewKey.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCDoc.HLocation | ARCDoc | Class | Simple class describing the location of a single -IP- instance within some hierarhical context. |
| ARCQuery.NewKey.Parsers | ARCQuery | ClassMember | Instances of all the relevant sub classes of -NewKey-. |
| ARCDoc.HLocation.TryGetP | ARCDoc | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCQuery.NewKeyCountP | ARCQuery | Class | Returns the number of properties for a given entity object. |
| ARCDoc.HLocation.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCQuery.NewKeyCountP.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCDoc.HLocation.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCQuery.NewKeyCountP.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCDoc.HTOC.Create | ARCDoc | ClassMember | Structures content hierarchically according to the criteria for each level. |
| ARCQuery.NewKeyCountP.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| ARCDoc.HTOC.ToHTMLSimpleSingle Overload2 | ARCDoc | ClassMember | Alternative ('override') to -ToHTMLSimpleSingle-. |
| ARCQuery.NewKeyCountP.SyntaxHelp | ARCQuery | ClassMember | 'CountP()' |
| ARCDoc.HTOC.ToHTMLSimpleSingle Overload1 | ARCDoc | ClassMember | Use this method in any class where a table-of-contents type of view is desireable |
| ARCQuery.NewKeyCountP.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
| ARCDoc.HTOC.CreateInitialContent | ARCDoc | ClassMember | Helper method for creation of a -FilterBranch-. |
| ARCQuery.NewKeyCountP.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCDoc.HTOC.TryGetP | ARCDoc | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCQuery.NewKeyCountPRec | ARCQuery | Class | Returns the number of properties for a given entity object. |
| ARCDoc.HTOC.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCQuery.NewKeyCountPRec.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCDoc.HTOC.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCQuery.NewKeyCountPRec.CountPRec | ARCQuery | ClassMember | Counts recursively the number of properties for a given entity object. |
| ARCDoc.HTOC.HTOCContentThisLevelKey | ARCDoc | ClassMember | The key used for storing the actual content at this level. |
| ARCQuery.NewKeyCountPRec.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCDoc.PKDocAttribute | ARCDoc | Class | Describes documentation and presentation of a property. |
| ARCQuery.NewKeyCountPRec.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| ARCDoc.PKDocAttribute.Initialize | ARCDoc | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCQuery.NewKeyCountPRec.SyntaxHelp | ARCQuery | ClassMember | 'CountPRec()' |
| ARCDoc.PKDocAttribute.TryRemoveP | ARCDoc | ClassMember | Should probably never be used. |
| ARCQuery.NewKeyCountPRec.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
| ARCDoc.PKDocAttribute.PriorityOrder | ARCDoc | ClassMember | See -PriorityOrder-. |
| ARCQuery.NewKeyCountPRec.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCDoc.PKDocAttribute.IsDefault | ARCDoc | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCQuery.NewKeyGetType | ARCQuery | Class | Returns the internal C# object type of the given object. |
| ARCDoc.UtilDoc | ARCDoc | Class | Utility methods for -ARCDoc-. |
| ARCQuery.NewKeyGetType.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCDoc.UtilDoc.GetCurrentLevelInHierarchyAsHTML | ARCDoc | ClassMember | Returns an HTML presentation of the given link context, with links pointing backwards to each level in the hierarchy. |
| ARCQuery.QueryExpressionAggregate.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCDoc.UtilDoc.GenerateHTMLPage | ARCDoc | ClassMember | Wraps the parameter inside a <html><head></head><body>...</body></html> enclosure with some rudimentare CSS. |
| ARCQuery.QueryExpressionAggregate.SyntaxHelp | ARCQuery | ClassMember | 1) 'AGGREGATE {rowKey}' like "AGGREGATE Product" |
| ARCQuery.Quantile.OCTILE | ARCQuery | EnumMember | Divide into 8 parts |
| ARCQuery.QueryExpressionAggregate.AggregationType | ARCQuery | ClassMember | Most common value is -Count-, in which case -AggregationKey- may be correspondingly set to null. |
| ARCQuery.Quantile.DECILE | ARCQuery | EnumMember | Divide into 10 parts |
| ARCQuery.QueryExpressionAggregate.AggregationKey | ARCQuery | ClassMember | This is often null (with -AggregationType- correspondingly set to Count-). |
| ARCQuery.Quantile.DUODECILE | ARCQuery | EnumMember | Divide into 12 parts |
| ARCQuery.QueryExpressionAll | ARCQuery | Class | Represents all entities for a given collection. |
| ARCQuery.Quantile.HEXADECILE | ARCQuery | EnumMember | Divide into 16 parts |
| ARCQuery.QueryExpressionAll.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.Quantile.VENTILE | ARCQuery | EnumMember | Divide into 20 parts |
| ARCQuery.QueryExpressionAll.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.Quantile.PERCENTILE | ARCQuery | EnumMember | Divide into 100 parts |
| ARCQuery.QueryExpressionAll.SyntaxHelp | ARCQuery | ClassMember | 'ALL' (literally). |
| ARCQuery.Quantile.PERMILLE | ARCQuery | EnumMember | Divide into 1000 parts |
| ARCQuery.QueryExpressionCache | ARCQuery | Class | Describes if cache is to be used or not. |
| ARCQuery.QueryProgressP | ARCQuery | Enum | Describes class -QueryProgress-. |
| ARCQuery.QueryExpressionCache.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.QueryExpressionCache.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.QueryExpressionCache.SyntaxHelp | ARCQuery | ClassMember | CACHE {ON|OFF} |
| ARCQuery.QueryExpressionComment | ARCQuery | Class | Allows insertion of SQL style comments (beginning with double hyphens / minus signs, '--') into queries. |
| ARCQuery.QueryExpressionComment.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.QueryExpressionComment.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.QueryExpressionComment.SyntaxHelp | ARCQuery | ClassMember | COMMENT {comment text} |
| ARCQuery.QueryExpressionDataStorage | ARCQuery | Class | Experimental as of Mar 2022: Resets value for -DataStorage- |
| ARCQuery.QueryExpressionDataStorage.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.QueryExpressionDataStorage.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.QueryExpressionDataStorage.SyntaxHelp | ARCQuery | ClassMember | DATASTORAGE {new hierarchical level} [link adjustment] |
| ARCQuery.QueryExpressionDataStorage.LinkAdjustment | ARCQuery | ClassMember | See -LinkAdjustment- for documentation. |
| ARCQuery.QueryExpressionDataStorage.GlobalDataStorage | ARCQuery | ClassMember | TODO: Find some better initialization here. |
| ARCQuery.QueryExpressionHint | ARCQuery | Class | Describes if hints are to be generated (as query progresses) for potential new queries. |
| ARCQuery.QueryExpressionHint.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.QueryExpressionHint.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.QueryExpressionHint.SyntaxHelp | ARCQuery | ClassMember | HINT {ON|OFF} |
| ARCQuery.QueryExpressionLimit | ARCQuery | Class | Limits the final HTML presentation of results (limits the number of elements being presented). |
| ARCQuery.QueryExpressionLimit.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.QueryExpressionLimit.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.QueryExpressionLimit.SyntaxHelp | ARCQuery | ClassMember | Syntax: LIMIT {limit} like 'LIMIT 42' |
| ARCQuery.QueryExpressionLog | ARCQuery | Class | A debugging tool used to extract detailed log information about the execution of the query. |
| ARCQuery.QueryExpressionLog.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.QueryExpressionSkip.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.QueryExpressionSkip.SyntaxHelp | ARCQuery | ClassMember | SKIP {Count} like 'SKIP 42' |
| ARCQuery.QueryExpressionStrict | ARCQuery | Class | Describes -Strictness- ON / OFF when executing query. |
| ARCQuery.QueryExpressionStrict.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.QueryExpressionStrict.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.QueryExpressionStrict.SyntaxHelp | ARCQuery | ClassMember | STRICT {strictnessLevel} |
| ARCQuery.QueryExpressionTake | ARCQuery | Class | Takes a specific number of elements from the current query result. |
| ARCQuery.QueryExpressionTake.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.QueryExpressionTake.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.QueryExpressionTake.SyntaxHelp | ARCQuery | ClassMember | TAKE {Count} |
| ARCQuery.QueryExpressionThenBy | ARCQuery | Class | Allows sorting by multiple columns. |
| ARCQuery.QueryExpressionThenBy.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.QueryExpressionThenBy.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.QueryExpressionThenBy.SyntaxHelp | ARCQuery | ClassMember | THEN BY {key} [DESC] / [ASC] |
| ARCQuery.QueryExpressionTitle | ARCQuery | Class | The title to be used in the final presentation of the query result. |
| ARCQuery.QueryExpressionTitle.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.QueryExpressionTitle.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.QueryExpressionTitle.SyntaxHelp | ARCQuery | ClassMember | TITLE {title} |
| ARCQuery.QueryExpressionWhere | ARCQuery | Class | Executes a 'WHERE {key} {operator} {value}' against the given collection. |
| ARCQuery.QueryExpressionWhere.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.QueryExpressionWhere.IsMatch | ARCQuery | ClassMember | Returns TRUE if property matches criteria. |
| ARCQuery.QueryExpressionWhere.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.QueryExpressionWhere.SyntaxHelp | ARCQuery | ClassMember | WHERE {key} {operator} {value} |
| ARCQuery.QueryExpressionWhere.Value | ARCQuery | ClassMember | The Value should ideally be as strongly typed as possible. Note that it may be of type -ValueEnum- relevant for queries like WHERE Name = NULL. |
| ARCQuery.QueryProgress | ARCQuery | Class | Keeps track of execution of query (that is, a query consisting of multiple -QueryExpression-), and also stores final result. |
| ARCQuery.QueryProgress.ToJSONSerializeable | ARCQuery | ClassMember | Override of default interface method -ToJSONSerializeable- is necessary because resulting data is 'hidden' within -Result-. |
| ARCQuery.QueryProgress.PreviousQueryJustExecuted | ARCQuery | ClassMember | TODO: This is somewhat loosely associated. |
| ARCQuery.QueryProgress.NextQueryToExecute | ARCQuery | ClassMember | TODO: This is somewhat loosely associated. |
| ARCQuery.QueryProgress.ToHTMLSimpleSingle | ARCQuery | ClassMember | Alternative ('override') to -ToHTMLSimpleSingle-. |
| ARCQuery.QueryProgress.OrderAndReconstructKeys | ARCQuery | ClassMember | Part 1: |
| ARCQuery.QueryProgress.GetHTMLLinksToIndividualQueryParts | ARCQuery | ClassMember | Is able to generate the following: |
| ARCQuery.QueryProgress.ToString | ARCQuery | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCQuery.ForeignKey+ForeignKeySingleStep | ARCQuery | Class | Describes how to traverse between related entities. |
| ARCQuery.ForeignKey+ForeignKeySingleStep.ForeignEntitiesCollection | ARCQuery | ClassMember | The collection containing all the (foreign) entities for the type that this step leads to |
| ARCQuery.QueryExpressionSelfCreate+ISelfCreateCollection | ARCQuery | Class | Provides a standardized mechanism for describing classes that are able to autogenerate collection of themeselves. |
| ARCQuery.ForeignKeyDirection | ARCQuery | Enum | Describes the type of traversing to a foreign entity possible. |
| ARCQuery.ForeignKeyDirection.ToOne | ARCQuery | EnumMember | Traverse to one entity, like traversing from OrderLine to Order (based on OrderLine containing foreign key OrderId) or Order to Customer (based on Order containing foreign key CustomerId). |
| ARCQuery.ForeignKeyDirection.ToMany | ARCQuery | EnumMember | Traverse to many entities, like traversing from Customer to Order (based on Order containing foreign key CustomerId) or Order to OrderLine (based on OrderLine containing foreign key OrderId). |
| ARCQuery.AggregationType | ARCQuery | Enum | Used by -QueryExpressionPivot- and -QueryExpressionAggregate-. |
| ARCQuery.AggregationType.Count | ARCQuery | EnumMember | |
| ARCQuery.AggregationType.Sum | ARCQuery | EnumMember | |
| ARCQuery.RelationalOperator | ARCQuery | Enum | Relational / comparision operators. |
| ARCQuery.RelationalOperator.EQ | ARCQuery | EnumMember | |
| ARCQuery.RelationalOperator.CONTAINS | ARCQuery | EnumMember | |
| ARCQuery.RelationalOperator.NEQ | ARCQuery | EnumMember | |
| ARCQuery.RelationalOperator.NOTCONTAINS | ARCQuery | EnumMember | |
| ARCQuery.RelationalOperator.GT | ARCQuery | EnumMember | |
| ARCQuery.RelationalOperator.LT | ARCQuery | EnumMember | |
| ARCQuery.RelationalOperator.GEQ | ARCQuery | EnumMember | |
| ARCQuery.RelationalOperator.LEQ | ARCQuery | EnumMember | |
| ARCQuery.RelationalOperator.LIKE | ARCQuery | EnumMember | Case sensitive string wildcard comparision. |
| ARCQuery.RelationalOperator.ILIKE | ARCQuery | EnumMember | Case insensitive string wildcard comparision. |
| ARCQuery.RelationalOperator.NOTLIKE | ARCQuery | EnumMember | Case sensitive string wildcard comparision. |
| ARCQuery.RelationalOperator.NOTILIKE | ARCQuery | EnumMember | Case insensitive string wildcard comparision. |
| ARCQuery.Strictness | ARCQuery | Enum | Describes level of -Strictness- when executing query. |
| ARCQuery.Strictness.ON | ARCQuery | EnumMember | |
| ARCQuery.Strictness.OFF | ARCQuery | EnumMember | |
| ARCQuery.Quantile | ARCQuery | Enum | Describes quantiles like -TERTILE- and -QUARTILE-. |
| ARCQuery.Quantile.MEDIAN | ARCQuery | EnumMember | Divide into two parts |
| ARCQuery.Quantile.TERTILE | ARCQuery | EnumMember | Divide into three parts |
| ARCQuery.Quantile.QUARTILE | ARCQuery | EnumMember | Divide into four parts |
| ARCQuery.Quantile.QUINTILE | ARCQuery | EnumMember | Divide into five parts |
| ARCQuery.Quantile.SEXTILE | ARCQuery | EnumMember | Divide into 6 parts |
| ARCQuery.Quantile.SEPTILE | ARCQuery | EnumMember | Divide into 7 parts |
| AgoBrowse.Controllers.ControllerFacade.CatchAll Overload2 | AgoBrowse | ClassMember | Catches all HTTP GET requests to this API. |
| AgoBrowse.Controllers.ControllerFacade.CatchAll Overload1 | AgoBrowse | ClassMember | Catches all HTTP POST requests to this API. |
| Namespace ARCCore | Namespace | A necessary library (.DLL in Windows terms) that every -ARNodeType- should link to. | |
| Namespace ARCDoc | Namespace | A library supporting documentation and demonstrating usage of AgoRapide. | |
| Namespace ARCQuery | Namespace | ARCQuery provides a query language that mimicks SQL but is usable through HTTP as GET URLs. | |
| Namespace ARCAPI | Namespace | A library providing an API on top of the -PropertyStream-. | |
| Namespace AgoBrowse | Namespace | ||
| Namespace AgoBrowse.Controllers | Namespace | ||
| ARCQuery.UtilQuery.SplitOutsideOf | ARCQuery | ClassMember | Equivalent to string.Split except that any character encountered inside pairs of the 'outsideOf'-char are not counted as separators. |
| ARCQuery.UtilQuery.SpecialLinkPrefixes | ARCQuery | ClassMember | Contains prefixes for which links (see -LinkInsertionInDocumentation-) are also desired without the prefix. |
| ARCQuery.ValueComparer | ARCQuery | Class | Can evaluation expressions like 'WHERE Created = ThisYear. |
| ARCQuery.ValueComparer.TryGetPrevious | ARCQuery | ClassMember | Suggestion for previous query (browsing 'backwards') |
| ARCQuery.ValueComparer.TryGetNext | ARCQuery | ClassMember | Suggestion for next query (browsing 'forwards') |
| ARCQuery.ValueComparerDateTime | ARCQuery | Class | -ValueComparerDateTime- is an attempt at offering a human language interface for date and time queries. |
| ARCQuery.ValueComparerDateTime.TryGetPrevious | ARCQuery | ClassMember | Suggestion for previous query (browsing 'backwards') |
| ARCQuery.ValueComparerDateTime.TryGetNext | ARCQuery | ClassMember | Suggestion for next query (browsing 'forwards') |
| ARCQuery.ValueComparerDateTime.TryParse | ARCQuery | ClassMember | Note: This parser is probably exhaustive but not necessarily logical |
| ARCQuery.ValueComparerDateTime.Resolution | ARCQuery | ClassMember | See -ResolutionEnum-. |
| ARCQuery.ValueComparerDateTime.Steps | ARCQuery | ClassMember | Value 0 would mean 'This', like ThisHour, Today, ThisMonth and so on. |
| ARCQuery.ValueComparerDateTime.IsGliding | ARCQuery | ClassMember | The modifier 'Gliding' (or just 'G') can be appended in order to mean continous gliding periode, so for instance |
| ARCQuery.ValueComparerDateTime.IsBefore | ARCQuery | ClassMember | The modifier 'Before' can be prepended in order to mean from any time before the specified time. |
| ARCQuery.ValueComparerDateTime.IsAfter | ARCQuery | ClassMember | The modifier 'After' can be prepended in order to mean any time after the specified time. |
| ARCQuery.ValueComparerDateTime.IsInterval | ARCQuery | ClassMember | Normally the interval which is compared against is the timespan corresponding to -Resolution-. |
| ARCQuery.ValueComparerDateTime.InitValue | ARCQuery | ClassMember | For debugging purposes. The initial 'now' value used before calculating -StartPeriod- and -EndPeriod-. |
| ARCQuery.ValueComparerDateTime.StartPeriod | ARCQuery | ClassMember | The start of the interval which this instance compares against. |
| ARCQuery.ValueComparerDateTime.EndPeriod | ARCQuery | ClassMember | The end of the interval which this instance compares against. |
| ARCQuery.ValueComparerDateTime.ToDebugProperties | ARCQuery | ClassMember | Exposes all members of this class. |
| ARCQuery.ForeignKey+IKIPEqualityComparer | ARCQuery | Class | Used by -TryGetPInternal- when it needs distinct list of foreign entities, based on their keys |
| ARCQuery.ForeignKey+EntityTypeAndKey | ARCQuery | Class | Describes an entity type and a key. |
| ARCQuery.ForeignKey+EntityTypeAndKey.EntityType | ARCQuery | ClassMember | For -IPRelationsKeysPointingTo-, corresponds to foreign entity type. |
| ARCQuery.ForeignKey+EntityTypeAndKey.Key | ARCQuery | ClassMember | NOTE: Key in EntityTypeAndKey was relaxed from PK to IK 25 Feb 2022 in order for experiment in -ForeignKey- to work. |
| ARCQuery.ForeignKey+EntityTypeAndKey.OppositeTerm | ARCQuery | ClassMember | Corresponds to -PKRelAttributeP-.- OppositeTerm-. |
| ARCQuery.QueryExpressionWhere+ValueEnum.ALL | ARCQuery | EnumMember | Equivalent to query like WHERE Name = * |
| ARCQuery.ValueComparerDateTime+ResolutionEnum | ARCQuery | Enum | |
| ARCQuery.ValueComparerDateTime+ResolutionEnum.Second | ARCQuery | EnumMember | |
| ARCQuery.ValueComparerDateTime+ResolutionEnum.Minute | ARCQuery | EnumMember | |
| ARCQuery.ValueComparerDateTime+ResolutionEnum.Hour | ARCQuery | EnumMember | |
| ARCQuery.ValueComparerDateTime+ResolutionEnum.Day | ARCQuery | EnumMember | |
| ARCQuery.ValueComparerDateTime+ResolutionEnum.Week | ARCQuery | EnumMember | |
| ARCQuery.ValueComparerDateTime+ResolutionEnum.Month | ARCQuery | EnumMember | |
| ARCQuery.ValueComparerDateTime+ResolutionEnum.Quarter | ARCQuery | EnumMember | |
| ARCQuery.ValueComparerDateTime+ResolutionEnum.Year | ARCQuery | EnumMember | |
| Assembly ARCAPI | Assembly | A library providing an API on top of the -PropertyStream-. | |
| ARCAPI.ContentResult | ARCAPI | Class | Mimicks Microsoft.AspNetCore.Mvc.ContentResult. |
| ARCAPI.ContentResult.CreateHTMLOK | ARCAPI | ClassMember | NOTE: Parameter must be a complete HTML page. |
| ARCAPI.ContentResult.CreateError | ARCAPI | ClassMember | TODO: Add a key / value format for error messages, like done for -Log-. |
| ARCAPI.AddController | ARCAPI | Class | Parses and stores a -PropertyStreamLine-. |
| ARCAPI.AddController.APIMethod | ARCAPI | ClassMember | The (only) API method that this controller supports. |
| ARCAPI.AddController.ToString | ARCAPI | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCAPI.AddController.AllowFilter | ARCAPI | ClassMember | Describes what data is allowed to change through a list of -Subscription- instances. |
| ARCAPI.BaseController | ARCAPI | Class | Contains basic functionality for serving API methods. |
| ARCAPI.BaseController.BuildControllerStorage | ARCAPI | ClassMember | Builds a collection of 'std' (standard) controller instances to use for serving API requests. |
| ARCAPI.BaseController.APIMethod | ARCAPI | ClassMember | The (only) API method that this controller supports. |
Generated 2025-12-05 09:53:36.940 UTC