[ROOT] doc DocFrag SELECT Assembly, DocFragType, Description.FirstLine() < SKIP 41 > < TAKE 448 >
448 items
| DocFragId | Assembly | DocFragType | Description.FirstLine() |
|---|---|---|---|
| ARCCore.IKIP.TryAssertTypeIntegrity | ARCCore | ClassMember | Asserts that value is of correct type as specified by the key. |
| ARCCore.Extensions.SingleOrDefault | ARCCore | ClassMember | Same as inbuilt LINQ's SingleOrDefault except that gives a more friendly exception message |
| ARCCore.IKCoded.AllowedEncodedCharacters | ARCCore | ClassMember | The character set 'A...Za...z0...9-_().,='. |
| ARCCore.IKCoded.FromEncoded | ARCCore | ClassMember | Note how uses instance cache if already exists there. |
| ARCCore.IK | ARCCore | Class | IK = Interface Key / Index key. Key used to lookup 'inside' an instance of -IP-. |
| ARCCore.IKDate | ARCCore | Class | A more memory efficient alternative to -IKString- (together with -IKLong-). |
| ARCCore.IKCoded.TryEncode | ARCCore | ClassMember | Returns a string containing only characters in -AllowedEncodedCharacters-. |
| ARCCore.IKCoded | ARCCore | Class | Understands coded and unencoded variants of -IK-. |
| ARCCore.IKDate.ValidDateTimeFormats | ARCCore | ClassMember | Note: Be very careful about expanding this array. ToString must be considered, and also how Equals should work with other sub classes of IK. |
| ARCCore.IKDate.op_Equality | ARCCore | ClassMember | It is quite natural in the code to write code like "if (a.CustomerId == b.CustomerId)", therefore the need to implement == and != operators here. |
| ARCCore.IKCoded.ToString | ARCCore | ClassMember | Returns -Encoded-'s string representation. |
| ARCCore.IKLong | ARCCore | Class | A more memory efficient alternative to -IKString-. |
| ARCCore.IKDate.EnrichKey | ARCCore | ClassMember | 'Implementing' -ITypeDescriber-. |
| ARCCore.IKCoded.Encoded | ARCCore | ClassMember | This string value can be used directly in folder names, file names and HTTP URL's without any further encoding being necessary. |
| ARCCore.IKString.EnrichKey | ARCCore | ClassMember | 'Implementing' -ITypeDescriber-. |
| ARCCore.IKString | ARCCore | Class | Index key for any general id, like primary-key or sequence-number or similar. |
| ARCCore.IKLong.op_Equality | ARCCore | ClassMember | It is quite natural in the code to write code like "if (a.CustomerId == b.CustomerId)", therefore the need to implement == and != operators here. |
| ARCCore.IKType | ARCCore | Class | Index key used when storing a collection of a given type, like 'Customer'. |
| ARCCore.IKString.FromCache | ARCCore | ClassMember | Reduces number of objects generated by caching those known to be within a limited range |
| ARCCore.IKLong.EnrichKey | ARCCore | ClassMember | 'Implementing' -ITypeDescriber-. |
| ARCCore.ParseResult.Result | ARCCore | ClassMember | Will be null if ErrorResponse is set. |
| ARCCore.IKType.ToString | ARCCore | ClassMember | Caching is supposed to be useful because may be called quite often. |
| ARCCore.IKString.FromString | ARCCore | ClassMember | Note how uses instance cache if already exists there |
| ARCCore.ParseResult.ErrorResponse | ARCCore | ClassMember | Will be null if Result is set |
| ARCCore.ITypeDescriber | ARCCore | Class | Provides a standardized mechanism for describing single-property values (like 'PhoneNumber' of 'Customer' for instance). |
| ARCCore.IKString.op_Equality | ARCCore | ClassMember | It is quite natural in the code to write code like "if (a.CustomerId == b.CustomerId)", therefore the need to implement == and != operators here. |
| ARCCore.PK.ToString | ARCCore | ClassMember | Caching is supposed to be useful because may be called quite often. |
| ARCCore.PK | ARCCore | Class | PK = AgoRapide PropertyKey. |
| ARCCore.ITypeDescriber.GetSyntaxHelp | ARCCore | ClassMember | Enables explanation of syntax in different contexts from one source: |
| ARCCore.PK.TryValidateAndParse | ARCCore | ClassMember | Parses the value according to specifications for this property key. |
| ARCCore.PK.TryGetEnum | ARCCore | ClassMember | Note that usually you will not have to ask for this value, usually in AgoRapide it goes the other way around, you have the enum member / enum value and want the corresponding property key. |
| ARCCore.ParseResult | ARCCore | Class | NOTE: Concept is very old, from the dark ages of AgoRapide's very first inception. There might be room for improvement. |
| ARCCore.PK.TryGetFromTypeAndFieldName Overload3 | ARCCore | ClassMember | Returns property key based on type and field name. |
| ARCCore.PK.TryCleanValidateAndParse | ARCCore | ClassMember | Cleans and parses the value according to specifications for this property key. |
| ARCCore.PK.TryGetV | ARCCore | ClassMember | Only type of PK, string or type of __enum is allowed to ask for (as TRequest generic type parameter). |
| ARCCore.PK.TryGetFromTypeAndFieldName Overload2 | ARCCore | ClassMember | Returns property key based on type and field name. |
| ARCCore.PK.PackParseResultForStorageInEntityObject | ARCCore | ClassMember | Packs result of parsing into a -IP--derived class, suitable for sending to -AddOrUpdateP-. |
| ARCCore.PK.GetA | ARCCore | ClassMember | Convenience method for easy access to -BasePKAttribute- with corresponding explaining exception if fails |
| ARCCore.PK.TryGetFromTypeAndFieldName Overload1 | ARCCore | ClassMember | Returns property key based on type and field name. |
| ARCCore.PK.PackObjectForStorageInEntityObject | ARCCore | ClassMember | See -PackParseResultForStorageInEntityObject- for documentation. |
| ARCCore.PK.TryGetA | ARCCore | ClassMember | Convenience method for easy access to -BasePKAttribute-. |
| ARCCore.PK.GetAllPKForEntityType | ARCCore | ClassMember | Returns all property keys relevant for the given entity type, |
| ARCCore.PK.FromEnum | ARCCore | ClassMember | Returns the corresponding -PK- instance from the given -PropertyKeyEnum-. |
| ARCCore.PK.ModifyCleanerAndValidatorAndParserForCardinality | ARCCore | ClassMember | Called from -Initialize- after _cleaner and _validatorAndParser have been set. |
| ARCCore.PK.Equals | ARCCore | ClassMember | Note that ToString is only based on __enum, meaning that two enum members / enum values with same name but different type, like CustomerP.Name and OrderP.Name, will be considered equal. |
| ARCCore.PK.Cardinality | ARCCore | ClassMember | Returns cardinality from -PKTypeAttribute-'s -Cardinality-. |
| ARCCore.PK.GetAllPKForEntityTypeString | ARCCore | ClassMember | Returns all property keys relevant for the given entity type, |
| ARCCore.PK.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCCore.PK.CorrespondingClass | ARCCore | ClassMember | Returns -CorrespondingClass- based on -__enum-. |
| ARCCore.PK.BuildFromStringCache | ARCCore | ClassMember | Builds the content of -_fromStringCache- and also -_allPKForEntityTypeCache-. |
| ARCCore.PK..ctor | ARCCore | ClassMember | Constructor with 'object _enum' is necessary in order for ToString to work. |
| ARCCore.PK.ValidatorAndParser | ARCCore | ClassMember | Validates and parses a value. |
| ARCCore.PK.GetTypeMapping | ARCCore | ClassMember | Returns the relevant property key for a given type entity-type and field-type. |
| ARCCore.PK.Type | ARCCore | ClassMember | Returns type from -PKTypeAttribute-'s -Type-. |
| ARCCore.PK.Cleaner | ARCCore | ClassMember | Cleanup of values, to be used before value is attempted validated. |
| ARCCore.PK.GetObligatoryValuesForEntityType | ARCCore | ClassMember | Returns all obligatory values (based on -IsObligatory-) |
| ARCCore.PKHTMLAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.PKHTMLAttribute.Encode | ARCCore | ClassMember | Encodes the given string to HTML format through the static method implemented in class -Encoder-. |
| ARCCore.PK.AllEnums | ARCCore | ClassMember | All enums for the whole application. |
| ARCCore.IHTMLEncoder | ARCCore | Class | Pseudo-interface signifying that implementing class has a static metod called 'Encode' for encoding a string to HTML. |
| ARCCore.PKHTMLAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.PK.AllPKEnums | ARCCore | ClassMember | All -PropertyKeyEnum--tagged enums for the whole application. |
| ARCCore.PKLogAttribute | ARCCore | Class | Explains how logging of changes to a property should be done. |
| ARCCore.PKHTMLAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.PK.__enum | ARCCore | ClassMember | This information is also found as EnumMember. |
| ARCCore.PKLogAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.PKHTMLAttribute.Encoder | ARCCore | ClassMember | See -Encoder-. |
| ARCCore.PKHTMLAttribute | ARCCore | Class | Contains pointer to HTML encoder for a property. |
| ARCCore.PKRelAttribute.EnforceReferentialIntegrity | ARCCore | ClassMember | See -EnforceReferentialIntegrity-. |
| ARCCore.PKRelAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.PKLogAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.PKRelAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.PKRelAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.PKLogAttribute.DoNotLogAtAll | ARCCore | ClassMember | See -DoNotLogAtAll-. |
| ARCCore.PKTypeAttribute | ARCCore | Class | Contains the most basic essential information about a property key, like its description, -Type-, -Cardinality-, -IsObligatory- and -DefaultValue-. |
| ARCCore.PKRelAttribute.ForeignEntity | ARCCore | ClassMember | See -ForeignEntity-. |
| ARCCore.PKLogAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.PKTypeAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.PKRelAttribute.OppositeTerm | ARCCore | ClassMember | See -OppositeTerm-. |
| ARCCore.PKRelAttribute | ARCCore | Class | Describes relationships between entities (between tables in RDBMS terms). |
| ARCCore.IP.Log | ARCCore | ClassMember | The 'final' overload of -Log- that is called by the other overloads. |
| ARCCore.PKTypeAttribute.Cardinality | ARCCore | ClassMember | See -Cardinality-. |
| ARCCore.PKTypeAttribute.StandardValidatorAndParser | ARCCore | ClassMember | Returns validator and parser for well known types like string, int, long, bool, DateTime, TimeSpan, Type, Uri. |
| ARCCore.IP.LogExecuteTime | ARCCore | ClassMember | Times the execution of the given function and logs details about elapsed time. |
| ARCCore.PKTypeAttribute.DefaultValue | ARCCore | ClassMember | See -DefaultValue-. |
| ARCCore.PKTypeAttribute.StandardCleaner | ARCCore | ClassMember | Returns a cleaner for well known types like bool |
| ARCCore.IP.HandleException | ARCCore | ClassMember | Note that most relevant to use for -PConcurrent-. |
| ARCCore.PKTypeAttribute.IsObligatory | ARCCore | ClassMember | See -IsObligatory-. |
| ARCCore.PKTypeAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.IP.TryParseDtr | ARCCore | ClassMember | Parses a PropertyStreamLine- beginning with -dtr-. |
| ARCCore.PKTypeAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.PKTypeAttribute.Type | ARCCore | ClassMember | See -Type-. |
| ARCCore.IP.ToPropertyStream | ARCCore | ClassMember | Turns object into a -PropertyStream- |
| ARCCore.IP.Initialize | ARCCore | ClassMember | Note that has a default implementation (doing nothing). |
| ARCCore.IP | ARCCore | Class | IP = IProperty. |
| ARCCore.IP.ToJSONSerializeable | ARCCore | ClassMember | Prepares the data into a format acceptable for System.Text.Json.JsonSerializer.Serialize. |
| ARCCore.IP.AssertIntegrity | ARCCore | ClassMember | See -TryAssertIntegrity-. |
| ARCCore.IP.TryGetV Overload2 | ARCCore | ClassMember | The actual value of the property. Mostly relevant for single-value properties like -PValue-. |
| ARCCore.IP.GetValueForJSONSerializer | ARCCore | ClassMember | Practical approach to serializing of -IP- based values to JSON. |
| ARCCore.IP.TryAssertIntegrity | ARCCore | ClassMember | Asserts the integrity of this entity. |
| ARCCore.IP.Inc | ARCCore | ClassMember | Increments given property key by 1. Sets to 1 if not found. Uses long, not integer. |
| ARCCore.IP.TrySetP | ARCCore | ClassMember | Set property regardless of whether exists or not. |
| ARCCore.IP.ToString | ARCCore | ClassMember | The ToString()-implementation in the classes implementing this interface is supposed to give a short concise representation of the object for debugging and logging purposes, that is, intended for human consumption. The most 'important' implementation is probably the one in -PRich- (-ToString-) because that one is often the basis for your entity classes like 'Customer', 'Order' and so on |
| ARCCore.IP.Dec | ARCCore | ClassMember | Decrements given property key by 1. Sets to -1 if not found. Uses long, not integer. |
| ARCCore.IP.AddP | ARCCore | ClassMember | Adds a property for this object. |
| ARCCore.IP.TryGetV Overload1 | ARCCore | ClassMember | The actual 'unpacking' of the object. |
| ARCCore.IP.TrySetPP | ARCCore | ClassMember | SetPP = set property of property. Sets property of entity contained within this class. |
| ARCCore.IP.AddOrUpdateP | ARCCore | ClassMember | Duplicates functionality of SetP. |
| ARCCore.IP.DeepCopy | ARCCore | ClassMember | Creates a deep copy of this object instance, that is, a copy with all new object instances (except for immutable objects). |
| ARCCore.IP.GetKeysEqualToValue | ARCCore | ClassMember | Returns properties which themselves again have key and value equal to the given key and value. |
| ARCCore.IP.GetOrAddPV | ARCCore | ClassMember | Gets value. If not set then value will be added |
| ARCCore.IP.AddPV Overload2 | ARCCore | ClassMember | NOTE: The different AddPV / AddP overloads should only be used if you want an assertion against the |
| ARCCore.IP.OnTrySetP | ARCCore | ClassMember | Event handler to be called by -TrySetP- before it changes a property value (but AFTER it has done any validity checks, that is, after it has 'decided' to return TRUE, in other words, event handler should be called when change is guaranteed to go through, but before it actually has been done). |
| ARCCore.IP.GetPV | ARCCore | ClassMember | Gets a single property's value for this object. Returns default value if not successful. |
| ARCCore.IP.AddPV Overload1 | ARCCore | ClassMember | Adds a property value (as a -PValue-) for this objectThrows -KeyAlreadyExistsException- when relevant. |
| ARCCore.IP.TryGetP | ARCCore | ClassMember | Gets a single property for this object |
| ARCCore.IP.AllIPDerivedTypesWithPKEnumApplicationSpecific | ARCCore | ClassMember | All relevant -IP--derived types for the -ApplicationSpecificCode- part of the application for which also is defined a -PropertyKeyEnum-. |
| ARCCore.IP.Values | ARCCore | ClassMember | Returns all the values (all the properties) for this instance. |
| ARCCore.IP.TryGetPV | ARCCore | ClassMember | Gets a single property's value for the given property key. |
| ARCCore.IP.AllIPDerivedEntityCollectionClassesDict | ARCCore | ClassMember | All -IP--derived types for which is found a corresponding class with name like '{EntityType}Collection' |
| ARCCore.IP.Logger | ARCCore | ClassMember | Describes a logger. |
| ARCCore.IP.IsValid | ARCCore | ClassMember | Note that by default all properties are 'valid' but because of -NoRealDeletion-, we must have a mechanism for invalidating properties. This property returns FALSE if property has been invalidated and timestamp for invalidation is not '0001-01-01'. |
| ARCCore.IP.AllIPDerivedTypesInludingGenericAndAbstract | ARCCore | ClassMember | All relevant -IP--derived types (except the interface -IP- itself) known to the application. |
| ARCCore.IP.AllIPDerivedTypes | ARCCore | ClassMember | All relevant -IP--derived types for the whole application. |
| ARCCore.IP.Item | ARCCore | ClassMember | Offers string-based direct indexing. |
| ARCCore.IP.AllIPDerivedTypesDict | ARCCore | ClassMember | Provides lookup of a type in -AllIPDerivedTypes- given its string representation. |
| ARCCore.IP.AllIPDerivedTypesWithPKEnum | ARCCore | ClassMember | All relevant -IP--derived types for the whole application for which the also is defined a -PropertyKeyEnum-. |
| ARCCore.IP.Keys | ARCCore | ClassMember | Returns all the keys for this instance. |
| ARCCore.PExact<TEnumType>.SetPVDirect | ARCCore | ClassMember | High performance alternative to -TrySetP-, accessing -Storage- more direct. |
| ARCCore.PCollection.GetKeysEqualToValue | ARCCore | ClassMember | Returns properties which themselves again have key and value equal to the given key and value. |
| ARCCore.IP.AllIPDerivedTypesDictIKType | ARCCore | ClassMember | Same as -AllIPDerivedTypesDict- except that value is -IKType-, not string. |
| ARCCore.PExact<TEnumType>.GetPVDirect | ARCCore | ClassMember | High performance alternative to -TryGetP-, accessing -Storage- more direct. |
| ARCCore.PCollection.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCCore.P | ARCCore | Class | 'Dummy'-class, not necessarily in use. See -PP- for more information. Created because of the concept of CorrespondingClass which is strictly enforced |
| ARCCore.PExact<TEnumType>.TryGetPVDirect | ARCCore | ClassMember | High performance alternative to -TryGetP-, accessing -Storage- more direct. |
| ARCCore.PCollection.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.P.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCCore.PExact<TEnumType>.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.PCollection.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.P.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.PExact<TEnumType>..ctor | ARCCore | ClassMember | Set capacity to the number of members in the -PropertyKeyEnum- for this class (minus the __invalid-value) |
| ARCCore.IGetKeysEqualToValue | ARCCore | Class | Interface stating that implementing class does not use the default implementation of -GetKeysEqualToValue- (which does not use -Indexing-) but has replaced it with a more efficient implementation assumed to utilize -Indexing-. |
| ARCCore.P.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.PExact<TEnumType>.Storage | ARCCore | ClassMember | Uses int-value of -__enum- minus 1 as index. |
| ARCCore.PConcurrent | ARCCore | Class | A (somewhat) thread-safe alternative to -PRich- which also supports -ExposingApplicationState- (through -Logger-). |
| ARCCore.ICreated | ARCCore | Class | A dummy interface signifying that implementing class has the ability to store (in-memory) metadata -Created- |
| ARCCore.PII | ARCCore | Class | PII = property for storing individual items. |
| ARCCore.PConcurrent.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.PCollection | ARCCore | Class | A class useful for storing a collection of entities (a table in RDBMS-terms) because it implements -Indexing-. |
| ARCCore.PII.TryGetV | ARCCore | ClassMember | Since value is stored in keys, we need to override this method. |
| ARCCore.PExact<TEnumType> | ARCCore | Class | Very -MemoryConsumption- efficient alternative to -PRich-. |
| ARCCore.PCollection.TrySetPP | ARCCore | ClassMember | Replaces default interface method -TrySetPP-. |
| ARCCore.PII.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCCore.PValue<T>.DeepCopy | ARCCore | ClassMember | Note that if the generic type (T) is not immutable, then what we return will not be a truly deep copy. |
| ARCCore.PRich.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCCore.PII.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.PValue<T>..ctor | ARCCore | ClassMember | Note how this class does not have a parameter-less constructor (unlike all other -IP--derived classes in AgoRapide) |
| ARCCore.PRich.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.IPII | ARCCore | Class | Future expansion, using different classes for storing, not only -PII-. |
| ARCCore.PValueEmpty | ARCCore | Class | Represents the 'no value'. |
| ARCCore.PRich.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.IIKII | ARCCore | Class | Related to -PII-, property for storing individual items |
| ARCCore.PValueEmpty.TrySetP | ARCCore | ClassMember | NOTE: -TryStore- is explicit aware that -PValue- and -PValueEmpty- |
| ARCCore.PValue<T> | ARCCore | Class | Single value storage. |
| ARCCore.IIKII.PackParseResultForStorageInIKII | ARCCore | ClassMember | This method corresponds to -PackParseResultForStorageInEntityObject-. |
| ARCCore.PValueEmpty.ToPropertyStream | ARCCore | ClassMember | Typicall return value could be something like |
| ARCCore.PValue<T>.TrySetP | ARCCore | ClassMember | NOTE: -TryStore- is explicit aware that -PValue- and -PValueEmpty- |
| ARCCore.IIKII.PackObjectForStorageInIKII | ARCCore | ClassMember | This method corresponds to -PackObjectForStorageInEntityObject-. |
| ARCCore.ActualConnection | ARCCore | Class | The actual connection, its internal state, queue for sending and so on. |
| ARCCore.PValue<T>.TryGetV | ARCCore | ClassMember | Supports duck typing. |
| ARCCore.PReadOnly | ARCCore | Class | Experimental (from Feb 2022) class suitable for classes that do not need to be deserialized, or to accept write requests through -PropertyAccess-. |
| ARCCore.ActualConnection.SetMyUpdatePositionGenerator | ARCCore | ClassMember | Set by -StreamProcessor-. |
| ARCCore.PValue<T>.ConvertObjectToString | ARCCore | ClassMember | Converts object to string. |
| ARCCore.PRich | ARCCore | Class | Fully flexible storage. Can store anything. Typical inherited for entity representations like 'Customer' or 'Order'. |
| ARCCore.ActualConnection.SetSinglePropertyStreamReceiver | ARCCore | ClassMember | Set by -StreamProcessor-. |
| ARCCore.PValue<T>.ToString | ARCCore | ClassMember | Do no cache this value, because memory consumption would then increase significantly in your applicationj |
| ARCCore.ClientUpdatePosition | ARCCore | Class | Describes from WHERE (from WHEN) in the historic -PropertyStream- new data is to be returned. |
| ARCCore.ActualConnection.SetUpToDatePositionGenerator | ARCCore | ClassMember | Set by -StreamProcessor-. Not used by -Client-. |
| ARCCore.ClientUpdatePosition.OnlyNewDataIsRequestedInstance | ARCCore | ClassMember | See also -OnlyNewDataIsRequested. |
| ARCCore.ClientUpdatePosition.Filename | ARCCore | ClassMember | Filename like '2020-04-03 08:42:22_R001' |
| ARCCore.ActualConnection.InitializeOutgoingConnection | ARCCore | ClassMember | Relevant for -Outgoing-. |
| ARCCore.ConnectionInstruction | ARCCore | Class | The instruction about what connections to make (host, portnr, data transfer direction and so on). |
| ARCCore.ClientUpdatePosition.Index | ARCCore | ClassMember | Index (zero-based) into file. Value of -1 means blank update status / no data received at all (or no data received for this specific filename) |
| ARCCore.ActualConnection.Communicate | ARCCore | ClassMember | Common for both -Incoming- and -Outgoing-. |
| ARCCore.ConnectionInstruction.Initialize | ARCCore | ClassMember | Initializes to sane values. |
| ARCCore.ClientUpdatePosition.ClientDatastoreIsEmpty | ARCCore | ClassMember | Used by the subscribing client to signify that it has no data stored locally, and it therefore needs an update from the beginning of the -PropertyStream-, that is, 'from the beginning of time'. |
| ARCCore.ActualConnection.LogAndSendErrorConditionData | ARCCore | ClassMember | Called when a serious error condition has been discovered and connection should be terminated. |
| ARCCore.ConnectionInstruction.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCCore.ClientUpdatePosition.OnlyNewDataIsRequested | ARCCore | ClassMember | Used by the subscribing client to signify that it does not care about historical data, the server may start with sending only new data. |
| ARCCore.ActualConnection.Send | ARCCore | ClassMember | Sends all messages in queue. |
| ARCCore.ConnectionInstruction.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.ClientUpdatePosition.IsGoBack | ARCCore | ClassMember | Has to be translated by -StreamProcessor- into a concrete filename / index. |
| ARCCore.ActualConnection.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.ConnectionInstruction.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.ClientUpdatePosition.IsAtEndOfStream | ARCCore | ClassMember | Necessary in order to implement -AdHocQuery-. |
| ARCCore.ActualConnection..ctor | ARCCore | ClassMember | Note parameter-less constructor as desired for all classes inheriting -IP-. |
| ARCCore.Sharding | ARCCore | Class | Enables load-balancing by describing what data should be sent over a given connection. |
| ARCCore.ClientUpdatePosition.ClientDatastoreIsEmptyInstance | ARCCore | ClassMember | See also -ClientDatastoreIsEmpty. |
| ARCCore.MonkeyWrench | ARCCore | Class | Describes level of 'spanner-throwing' this connection shall contibute with |
| ARCCore.PropertyStreamLine | ARCCore | Class | Has two main functions: |
| ARCCore.PropertyStreamLine.ParseAndStoreFailSafe | ARCCore | ClassMember | If either parsing or storing fails then this method will call -StoreFailure- in order to keep some track of why parsing or storing failed. |
| ARCCore.PropertyStreamLine.EncodeKeys | ARCCore | ClassMember | Encodes the key part of a -PropertyStreamLine-. |
| ARCCore.PropertyStreamLineParsed.TryParse | ARCCore | ClassMember | Generate list of <(IK key, Type valueType)> together with value from value part. |
| ARCCore.PropertyStreamLine.StoreFailSafe | ARCCore | ClassMember | Stores if possible and fails silently. |
| ARCCore.PropertyStreamLine.EncodeValues | ARCCore | ClassMember | Typically used when turning -WholeCollection- into a value part of a -PropertyStreamLine-. |
| ARCCore.PropertyStreamLineParsed.IsComment | ARCCore | ClassMember | Signifies that property stream line given for parsing started with '//' (two forward slashes). |
| ARCCore.PropertyStreamLine.StoreFailure | ARCCore | ClassMember | Stores a 'ParseOrStoreFailure'-object. |
| ARCCore.PropertyStreamLine.EncodeKeyPart | ARCCore | ClassMember | Converts a single key part of a -PropertyStreamLine- to a format suitable for sending over a -PropertyStream-. |
| ARCCore.PropertyStreamLineParsed.Keys | ARCCore | ClassMember | The keys part of the -PropertyStreamLine-, that is, everything before ' = '. |
| ARCCore.PropertyStreamLine.TryStore | ARCCore | ClassMember | Stores the given -PropertyStreamLineParsed- in the given storage object. |
| ARCCore.PropertyStreamLine.EncodeValuePart | ARCCore | ClassMember | Converts a single value part of a -PropertyStreamLine- to a format suitable for sending over a -PropertyStream-. |
| ARCCore.PropertyStreamLineParsed.Value | ARCCore | ClassMember | The original (non-parsed, non-validated)) value part of the -PropertyStreamLine-, that is, everything after ' = '. |
| ARCCore.PropertyStreamLine.AllowedKeyChars | ARCCore | ClassMember | Allowed characters in the Key-part of a -PropertyStreamLine-. |
| ARCCore.PropertyStreamLine.Decode | ARCCore | ClassMember | Decodes string as encoded by -EncodeKeyPart- or -EncodeValuePart-. |
| ARCCore.StreamProcessor | ARCCore | Class | Implements the storage mechanism for AgoRapide. |
| ARCCore.PropertyStreamLine.AllowedValueChars | ARCCore | ClassMember | Allowed characters in the Value-part of a -PropertyStreamLine-. |
| ARCCore.PropertyStreamLine.TryParseDirectToIP | ARCCore | ClassMember | Parses a series of -PropertyStreamLine- directly to the given type of -IP-. |
| ARCCore.StreamProcessor.CreateBareBonesInstance | ARCCore | ClassMember | Creates a bare-bones -StreamProcessor- instance. |
| ARCCore.PropertyStreamLineParsed | ARCCore | Class | Parses the keys part of a line from -PropertyStream-, like 'Customer/42/FirstName = John. |
| ARCCore.PropertyStreamLine.TryParseDirectToProperty | ARCCore | ClassMember | Parses direct to a given property value. |
| ARCCore.StreamProcessor.Initialize | ARCCore | ClassMember | Initializes this instance of -StreamProcessor- |
| ARCCore.PropertyStreamLineParsed.ToString | ARCCore | ClassMember | Note relatively complex operation of 'restoring' original property stream line. |
| ARCCore.PropertyStreamLine.ParseAndStore | ARCCore | ClassMember | Note that throws exception if -TryParseAndStore- fails. |
| ARCCore.StreamProcessor.AddOrRemoveOutgoingConnections | ARCCore | ClassMember | Not relevant for -CoreDB-. |
| ARCCore.PropertyStreamLineWithOrigin.SendToLocalReceiver | ARCCore | ClassMember | Means 'send to local receiver regardless of origin'. |
| ARCCore.StreamProcessor.StartTCPIPCommunication | ARCCore | ClassMember | Starts communicating over TCP/IP. |
| ARCCore.Subscription.FromTime | ARCCore | ClassMember | TODO: Implement concept of specifying starting-point in TIME (often for an -AdHocQuery-?). |
| ARCCore.PropertyStreamLineWithOrigin.DoNotAddTimestamp | ARCCore | ClassMember | Normally -StreamProcessor- inserts the required -Timestamp-s in the AgoRapide storage. |
| ARCCore.StreamProcessor.ReceiveAndDistribute | ARCCore | ClassMember | Process all messages in receive queue. |
| ARCCore.Subscription.ToTime | ARCCore | ClassMember | TODO: Implement concept of specifying ending-point in TIME (often for an -AdHocQuery-?). |
| ARCCore.PropertyStreamLineWithOrigin.ReceivedFromOutgoing | ARCCore | ClassMember | Data received from an outgoing connection, that is, data received based on 'this' application's subscription request (as subscribing client). |
| ARCCore.StreamProcessor.AddTimestampAsRequired | ARCCore | ClassMember | Adds -Timestamp- to the property stream (to -_queueReceive-) as specified by -TimestampResolution-. |
| ARCCore.Subscription.IsMatch Overload1 | ARCCore | ClassMember | Evaluates a query consisting of multiple instances of -Subscription- against a single property stream line. |
| ARCCore.StorageFile | ARCCore | Class | Implemented only in order to store some ideas about -Hash-. |
| ARCCore.StreamProcessor.ReadStorageFile | ARCCore | ClassMember | Reads one storage file from disk |
| ARCCore.Subscription.IsMatch Overload2 | ARCCore | ClassMember | Evaluates this instance of -Subscription- against a single property stream line (which has been split up into its constituent elements). |
| ARCCore.StorageFile.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCCore.StreamProcessor.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.Subscription.SyntaxHelp | ARCCore | ClassMember | '+*' Subscribe to everything in database. |
| ARCCore.StorageFile.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.StreamProcessor.OutsideLocalReceiver | ARCCore | ClassMember | The outside (in the sense outside of this class) local mechanism which receives all -PropertyStreamLine- registered by this class. |
| ARCCore.Subscription.IsAdd | ARCCore | ClassMember | Corresponds to whether value starts with a plus sign, '+' or not. |
| ARCCore.StorageFile.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.PropertyStreamLineWithOrigin | ARCCore | Class | The rationale for this class is that -ReceiveAndDistribute- needs to distingush origin of data when routing it (in general, in order to avoid sending it back to its source). |
| ARCCore.Subscription.IsRemove | ARCCore | ClassMember | Corresponds to whether value starts with a minus sign, '+' or not. |
| ARCCore.Subscription | ARCCore | Class | A stream -Subscription- is the concept of how nodes (see -ARNodeType-) subscribe to the -PropertyStream- (either the whole stream or just part of it) in a distributed manner. |
| ARCCore.PropertyStreamLineWithOrigin.HasLocalOrigin | ARCCore | ClassMember | Locally generated data is not to be sent to -OutsideLocalReceiver-). We instead leave it to the 'outside' to decide if |
| ARCCore.UtilCore | ARCCore | Class | Utility methods for -ARCCore-. |
| ARCCore.UtilCore.ValidDateTimeFormats | ARCCore | ClassMember | 'yyyy-MM-dd HH:mm:ss.fff', 'yyyy-MM-dd HH:mm:ss', 'yyyy-MM-dd HH:mm', 'yyyy-MM-dd' |
| ARCCore.UtilCore.AssertCurrentlyStartingUp | ARCCore | ClassMember | Normally called from non-thread safe methods that should be run single-threaded at application startup only. |
| ARCCore.UtilCore.TimeSpanTryParse | ARCCore | ClassMember | Accepts on of the formats specified in -ValidDateTimeFormats-. |
| ARCCore.UtilCore.ValidTimeSpanFormats | ARCCore | ClassMember | 'hh\:mm', 'hh\:mm\:ss', 'd\.hh\:mm\:ss', 'hh\:mm\:ss\.fff' // Milliseconds,'d\.hh\:mm\:ss\.fff' |
| ARCCore.UtilCore.DoubleTryParse | ARCCore | ClassMember | Note that treats ',' (comma) as decimal point (not as thousands separator). |
| ARCCore.UtilCore.UseLocalTimeInsteadOfUTC | ARCCore | ClassMember | By default AgoRapide operates only with UTC time. |
| ARCCore.REx | ARCCore | Class | REx = 'TooDeepRecursiveDepthException' |
| ARCCore.UtilCore.EnumTryParse | ARCCore | ClassMember | Same as the inbuilt .NET method -TryParse- but with some additional checks. |
| ARCCore.UtilCore.DateTimeNow | ARCCore | ClassMember | Returns DateTime.UtcNow unless -UseLocalTimeInsteadOfUTC- has been set to TRUE in which case DateTime.Now is returned. |
| ARCCore.REx.Inc | ARCCore | ClassMember | Increases recursive count. |
| ARCCore.UtilCore.TryGetTypeFromStringNoCache | ARCCore | ClassMember | See -TryGetTypeFromStringFromCache- for documentation. |
| ARCCore.UtilCore.CurrentlyStartingUp | ARCCore | ClassMember | Called once at application startup after all Attribute instances in the C# code has been processed. |
| ARCCore.REx.Dec | ARCCore | ClassMember | This method should be called from inside a 'finally' block, in order to secure its execution, if not then your static recursion depth counter could slowly increase over time due to exceptions ocurring after call to -Inc- but before call to -Dec-. |
| ARCCore.UtilCore.TryGetTypeFromStringFromCache | ARCCore | ClassMember | Corresponding method for creating string-representation of type is -ToStringDB-. |
| ARCCore.UtilCore.Assemblies | ARCCore | ClassMember | All relevant assemblies for application. |
| ARCCore.InvalidTypeException | ARCCore | Class | |
| ARCCore.UtilCore.GetExceptionChainAsString | ARCCore | ClassMember | Follows the chain of InnerException and returns types as comma-separated string |
| ARCCore.UtilCore.Culture | ARCCore | ClassMember | The general culture used for parsing. |
| ARCCore.InvalidTypeException.AssertAssignable | ARCCore | ClassMember | Asserts that expectedType.IsAssignableFrom(foundType) |
| ARCCore.UtilCore.GetExeptionDetails | ARCCore | ClassMember | Gives as much information about exception as possible. |
| ARCCore.UtilCore.Culture_en_US | ARCCore | ClassMember | Used by -DoubleTryParse-. |
| ARCCore.InvalidTypeException.AssertEquals | ARCCore | ClassMember | Asserts that expectedType.Equals(foundType) |
| ARCCore.UtilCore.DateTimeTryParse | ARCCore | ClassMember | Accepts on of the formats specified in -ValidDateTimeFormats-. |
| ARCCore.UtilCore.DefaultAgoRapideEncoding | ARCCore | ClassMember | The standard encoding used for text (UTF8). |
| ARCCore.BaseAttributeP.LongDescription | ARCCore | EnumMember | The long (detailed) description for the attribute. |
| ARCCore.TValue | ARCCore | Class | Placeholder for any class type suitable as generic type parameter -PValue-. |
| ARCCore.PK+PKBoolPair.TrulyInitialized | ARCCore | ClassMember | Not used currently (May 2020). Useful for debugging purposes |
| ARCCore.ClassAttributeP | ARCCore | Enum | Describes class -ClassAttribute-. |
| ARCCore.TIP | ARCCore | Class | Placeholder for any class type suitable as generic type parameter restricted to -IP. |
| ARCCore.StreamProcessor+StorageFile | ARCCore | Class | |
| ARCCore.ClassAttributeP.AssemblyName | ARCCore | EnumMember | The assembly in which this class resides. |
| ARCCore.TIP.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCCore.StreamProcessor+StorageFile.Filepath | ARCCore | ClassMember | Complete path to file |
| ARCCore.ClassAttributeP.ClassNamespace | ARCCore | EnumMember | The namespace for -ClassType-. |
| ARCCore.TIP.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.StreamProcessor+StorageFile.Filename | ARCCore | ClassMember | Filename: Main file name, like 2020-04-03 08:42 |
| ARCCore.ClassAttributeP.ClassType | ARCCore | EnumMember | The actual type that we are a -ClassAttribute- for |
| ARCCore.TIP.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.StreamProcessor+StorageFile.Length | ARCCore | ClassMember | Wrongly placed. Belongs to each individual revision file. |
| ARCCore.ClassAttributeP.BaseTypes | ARCCore | EnumMember | The inheritance hierarchy for this class, starting with base type (excluding 'object').r Not set if class does not inherit any class except 'object' |
| ARCCore.BaseAttribute+IncorrectAttributeTypeUsedException | ARCCore | Class | Helps to clean up any confusion about which -BaseAttribute- to use in a given concept. |
| ARCCore.StreamProcessor+StorageFile.Properties | ARCCore | ClassMember | Key = revision number of file (due to compression / -DataRetention-), like R00001, R00002 and so on. |
| ARCCore.ClassAttributeP.SubTypes | ARCCore | EnumMember | Direct and indirect sub types of this class. |
| ARCCore.PK+BasePKAttributeNotFoundException<T> | ARCCore | Class | Explains how to implement a given -BasePKAttribute- for an enum |
| ARCCore.BaseAttributeP | ARCCore | Enum | Describes class -BaseAttribute-. |
| ARCCore.ClassAttributeP.Interfaces | ARCCore | EnumMember | All interfaces that this class and its base classes implement |
| ARCCore.PK+PKBoolPair | ARCCore | Class | Used to signify that a given -PK- returned from value factory inside -FromEnum- has not been initialized (has not yet been populated with -PKTypeAttribute- collection). |
| ARCCore.BaseAttributeP.Description | ARCCore | EnumMember | The description for the attribute, like this description |
| ARCCore.ARComponents | ARCCore | Enum | ARComponents = AgoRapide Components. Contains short descriptions of the different 'official' AgoRapide components. |
| ARCCore.ClassAttributeP.InterfacesDirectlyImplemented | ARCCore | EnumMember | All interfaces that this class directly implements. |
| ARCCore.EnumAttributeP.AssemblyName | ARCCore | EnumMember | The assembly in which this class resides. |
| ARCCore.ARComponents.ARCCore | ARCCore | EnumMember | A necessary library (.DLL in Windows terms) that every -ARNodeType- should link to. |
| ARCCore.ClassAttributeP.CorrespondingEnumType | ARCCore | EnumMember | Only relevant when implements -IP-. |
| ARCCore.EnumAttributeP.EnumNamespace | ARCCore | EnumMember | The namespace for -EnumType-. |
| ARCCore.ARComponents.ARADB | ARCCore | EnumMember | An application constituting the full functionality of a -CoreDB- (linking to -ARCCore-). |
| ARCCore.ClassAttributeP.BoilerplateCodePropertiesAndStorage | ARCCore | EnumMember | Only relevant when implements -IP- and when a -CorrespondingEnumType- is found. |
| ARCCore.EnumAttributeP.EnumType | ARCCore | EnumMember | The type of the enum (like type of 'CustomerP' in CustomerP.FirstName) that we are an attribute for |
| ARCCore.ARComponents.ARAClient | ARCCore | EnumMember | A template application for a -Client- (linking to -ARCCore-). |
| ARCCore.ClassMemberAttributeP | ARCCore | Enum | Describes class -ClassMemberAttribute-. |
| ARCCore.EnumAttributeP.AREnumType | ARCCore | EnumMember | Note that will default to -__invalid- if not explicit set. |
| ARCCore.ARComponents.ARCDoc | ARCCore | EnumMember | A library supporting documentation and demonstrating usage of AgoRapide. |
| ARCCore.ClassMemberAttributeP.DeclaringType | ARCCore | EnumMember | The actual MemberInfo.DeclaringType. |
| ARCCore.EnumAttributeP.CorrespondingClass | ARCCore | EnumMember | Only relevant when -PropertyKeyEnum-. |
| ARCCore.ARComponents.ARCQuery | ARCCore | EnumMember | ARCQuery provides a query language that mimicks SQL but is usable through HTTP as GET URLs. |
| ARCCore.ClassMemberAttributeP.MethodName | ARCCore | EnumMember | The actual MemberInfo.Name. |
| ARCCore.EnumMemberAttributeP | ARCCore | Enum | Describes class -EnumMemberAttribute-. |
| ARCCore.ARComponents.ARCEvent | ARCCore | EnumMember | ARCEvent contains an -EventSourcing- engine offering a unique -PropertyStream2D- concept where processes (of some business domain) can be expressed in very compact manner through the concept of -IRegHandler-. |
| ARCCore.ClassMemberAttributeP.MethodSignature | ARCCore | EnumMember | The actual MemberInfo.ToString. |
| ARCCore.EnumMemberAttributeP.EnumType | ARCCore | EnumMember | The type of the enum (like type of 'CustomerP' in CustomerP.FirstName) that we are an attribute for |
| ARCCore.ARComponents.ARCSync | ARCCore | EnumMember | (Not implemented as of March 2020) |
| ARCCore.EnumAttributeP | ARCCore | Enum | Describes class -EnumAttribute-. |
| ARCCore.EnumMemberAttributeP.EnumMember | ARCCore | EnumMember | The actual enum member / enum value (like 'Firstname' in CustomerP.FirstName) that we are an attribute for |
| ARCCore.AREnumType.OrdinaryEnum | ARCCore | EnumMember | Designates "Ordinary" enums used for indicating range of valid values for a given key |
| ARCCore.ARComponents.ARCSec | ARCCore | EnumMember | (Not implemented as of March 2020) |
| ARCCore.ARConcepts.StandardAgoRapideCode | ARCCore | EnumMember | Code originating from the main official AgoRapide distribution (which therefore does not include any end-application specific code) |
| ARCCore.AREnumType.DocumentationOnlyEnum | ARCCore | EnumMember | Designates enums that provide a central repository of explanation of terms that are not present in the C# code. |
| ARCCore.ARComponents.ARCAPI | ARCCore | EnumMember | A library providing an API on top of the -PropertyStream-. |
| ARCCore.ARConcepts.ApplicationSpecificCode | ARCCore | EnumMember | Code specific for an end-application. |
| ARCCore.ARNodeType | ARCCore | Enum | Describes what function a node in an AgoRapide system serves. A given node may constitute of only -StandardAgoRapideCode- or a combination of -StandardAgoRapideCode- and -ApplicationSpecificCode-. |
| ARCCore.ARComponents.ARAAPI | ARCCore | EnumMember | The corresponding template application for -ARCAPI- demonstrating its usage, providing an HTTP / HTTPS interface with the help of Microsoft.AspNetCore.Mvc. |
| ARCCore.ARConcepts.MemoryConsumption | ARCCore | EnumMember | A naïve implementation of key-value storages like AgoRapide may lead to excessive memory (RAM) consumption. |
| ARCCore.ARNodeType.CoreDB | ARCCore | EnumMember | A node containing the core or central database. |
| ARCCore.ARConcepts | ARCCore | Enum | The overarching concepts upon which AgoRapide is built. |
| ARCCore.ARConcepts.Indexing | ARCCore | EnumMember | In-memory indexing of data is done 'behind-the-scenes' by some classes implementing -IP-. |
| ARCCore.ARNodeType.ArmDB | ARCCore | EnumMember | A node with a 'client -Subscription-' towards -CoreDB- to a (usually) subset of the entire database (acting as a cache and filtering mechanism), or with a 'client -Subscription-' towards -CoreDB- to the whole database (acting as a cache mechanism only) |
| ARCCore.ARConcepts.GettingStarted | ARCCore | EnumMember | AgoRapide 2020 is an open source library for building data-oriented backend applications using .NET. |
| ARCCore.ARConcepts.CoreDBSynchronization | ARCCore | EnumMember | The concept of how multiple -CoreDB- instances synchronizes their data. |
| ARCCore.ARNodeType.Client | ARCCore | EnumMember | An outer node / 'end' node with (usually) -ApplicationSpecificCode- but based on -ARADB-. |
| ARCCore.ARConcepts.PropertyStream | ARCCore | EnumMember | AgoRapide, the 'streams-of-water' database". |
| ARCCore.ARConcepts.SingleThreadedCode | ARCCore | EnumMember | Some practical choices have been made in AgoRapide which requires object access to be done in a single-threaded manner, or within a locking context (using for instance -ReaderWriterLockSlim-). |
| ARCCore.Cardinality | ARCCore | Enum | Describes how multiple instances of a property is supposed to be handled. |
| ARCCore.ARConcepts.PropertyStream2D | ARCCore | EnumMember | PropertyStream2D is an expansion of the -PropertyStream- concept supported by the library -ARCEvent-. |
| ARCCore.ARConcepts.DataRetention | ARCCore | EnumMember | The concept of when to delete old data (if deemed necessary). |
| ARCCore.Cardinality.HistoryOnly | ARCCore | EnumMember | The default value. |
| ARCCore.ARConcepts.EventSourcing | ARCCore | EnumMember | (related to -ARCEvent-). |
| ARCCore.ARConcepts.NoRealDeletion | ARCCore | EnumMember | AgoRapide has no real concept for deletion of data (apart from -DataRetention-, which is mostly relevant for 'old' data). |
| ARCCore.Cardinality.WholeCollection | ARCCore | EnumMember | Values are always set as a whole (there is no need or no meaning in setting or deleting individual items) |
| ARCCore.ARConcepts.RegStream | ARCCore | EnumMember | The concept in -ARCEvent- of an "axis" (usefully referred to as the vertical axis) within the concept of -PropertyStream2D-. |
| ARCCore.ARConcepts.ManyToManyRelations | ARCCore | EnumMember | -ARCQuery- supports many-to-many relations in a simple manner without introducing a third entity type (a third table). |
| ARCCore.Cardinality.IndividualItems | ARCCore | EnumMember | Values are supposed to be set and 'deleted' individually. |
| ARCCore.ARConcepts.EventStream | ARCCore | EnumMember | The concept in -ARCEvent- of an "axis" (usefully referred to as the horizontal axis) within the concept of -PropertyStream2D-. |
| ARCCore.ARConcepts.Documentation | ARCCore | EnumMember | Thanks to the tagging of enums and classes in AgoRapide (like this description), automatically generation of documentation is possible. |
| ARCCore.PSPrefix | ARCCore | Enum | Describes some recommended prefixes to use in a -PropertyStreamLine-. |
| ARCCore.ARConcepts.TransientEventTree | ARCCore | EnumMember | The concept in -ARCEvent- of how an -Event- in the -EventStream- generates transient events which in turn may generate |
| ARCCore.ARConcepts.AssertionsAndDetailedExceptionMessages | ARCCore | EnumMember | The abstraction level in AgoRapide is very high. |
| ARCCore.PSPrefix.dt | ARCCore | EnumMember | Data, single key + value. |
| ARCCore.ARConcepts.TaggingOfPropertyKeys | ARCCore | EnumMember | The concept of specifying in a single place all relevant information about a given property (data field). |
| ARCCore.ARConcepts.ExposingApplicationState | ARCCore | EnumMember | The traditional debugging process usually entails reading through logs and querying about your application state through a debugging tool. |
| ARCCore.PSPrefix.dtr | ARCCore | EnumMember | Data, whole records. |
| ARCCore.ARConcepts.PropertyAccess | ARCCore | EnumMember | The general mechanism for accessing properties of objects in AgoRapide. |
| ARCCore.ARConcepts.LinkInsertionInDocumentation | ARCCore | EnumMember | Documentation with links is much easier to read. |
| ARCCore.PSPrefix.RS | ARCCore | EnumMember | RS = Registration Stream (see -RegStream-). |
| ARCCore.ARConcepts.AvoidingRepetition | ARCCore | EnumMember | Avoiding repetition, the overarching philosophy that inspired the rest of AgoRapide. |
| ARCCore.ARConcepts.TryPatternAndNull | ARCCore | EnumMember | AgoRapide uses non-nullable reference types as default throughout the system |
| ARCCore.PSPrefix.ES | ARCCore | EnumMember | ES = Event Stream (see -EventStream-). |
| ARCCore.ARConcepts.AgoRapideHistory | ARCCore | EnumMember | AgoRapide has roots back to 2011 when Bjørn Erling Fløtten invented panSL (SL = Schema language). |
| ARCCore.AREnumType | ARCCore | Enum | Categories different types of enum used in AgoRapide. The most important one is -PropertyKeyEnum-. |
| ARCCore.PSPrefix.cmd | ARCCore | EnumMember | Command. |
| ARCCore.ARConcepts.AdHocQuery | ARCCore | EnumMember | The concept of a -Client- doing an ad-hoc query against (normally) a -ArmDB-. |
| ARCCore.AREnumType.PropertyKeyEnum | ARCCore | EnumMember | Designates enums that describe relevant values for an 'entity' object like 'Customer'. |
| ARCCore.ActualConnectionP.ConnectionInstruction | ARCCore | EnumMember | Only relevant when we are an -Outgoing-. |
| ARCCore.PSPrefix.app | ARCCore | EnumMember | Application state, like app/ |
| ARCCore.PKTypeAttributeP.Cardinality | ARCCore | EnumMember | Describes how multiple instances of a property is supposed to be handled. |
| ARCCore.ActualConnectionP.ConnectionDirection | ARCCore | EnumMember | |
| ARCCore.PSPrefix.doc | ARCCore | EnumMember | Documentation. |
| ARCCore.PKTypeAttributeP.IsObligatory | ARCCore | EnumMember | True means value is obligatory. |
| ARCCore.ActualConnectionP.CountReceiveMessage | ARCCore | EnumMember | |
| ARCCore.PSPrefix.t | ARCCore | EnumMember | Translations. |
| ARCCore.PKTypeAttributeP.BoilerplateCodeProperties | ARCCore | EnumMember | Automatically generated boilerplate code that implements traditional setters and getters for this key. |
| ARCCore.ActualConnectionP.CountSendMessage | ARCCore | EnumMember | |
| ARCCore.PKHTMLAttributeP | ARCCore | Enum | Describes class -PKRelAttribute-. |
| ARCCore.PP | ARCCore | Enum | Describes meta data for any class (property) implementing -IP-. |
| ARCCore.ActualConnectionP.ClientUpdatePosition | ARCCore | EnumMember | Note how this is stored both as -ClientUpdatePosition- (on the client side) and -ClientUpdatePosition- (on the server side). |
| ARCCore.PKHTMLAttributeP.Encoder | ARCCore | EnumMember | The class doing the HTML-encoding. |
| ARCCore.PP.Created | ARCCore | EnumMember | Timestamp when property was created in database. |
| ARCCore.ActualConnectionP.SubscriptionAsRequestedByClient | ARCCore | EnumMember | Originates from -Subscription-. |
| ARCCore.PKLogAttributeP | ARCCore | Enum | Describes class -PKLogAttribute. |
| ARCCore.PP.Cid | ARCCore | EnumMember | Creator id (entity which created this property). |
| ARCCore.ActualConnectionP.ClosingReason | ARCCore | EnumMember | Reason why this connection was closed |
| ARCCore.PKLogAttributeP.DoNotLogAtAll | ARCCore | EnumMember | Originates from -DoNotLogAtAll-. |
| ARCCore.PP.Value | ARCCore | EnumMember | The actual value. |
| ARCCore.ActualConnectionP.IsErrorCondition | ARCCore | EnumMember | Some kind of error condition has occured regarding data going back and forth, but the TCP/IP connection itself is probably sound. |
| ARCCore.PKLogAttributeP.CountInterval | ARCCore | EnumMember | For a value of n, log only every n'th time the property is changed. |
| ARCCore.PP.Valid | ARCCore | EnumMember | Timestamp when property was last known to be (still) valid |
| ARCCore.ActualConnectionP.ErrorConditionData | ARCCore | EnumMember | Detailed explanation about -IsErrorCondition- |
| ARCCore.PKLogAttributeP.TimeInterval | ARCCore | EnumMember | Specifies a certain time interval for which the property's value shall be sent over the -PropertyStream-. |
| ARCCore.PP.Vid | ARCCore | EnumMember | Validator id, that is entity which set -Valid- for this property. |
| ARCCore.ActualConnectionP.UnderClosure | ARCCore | EnumMember | Set to TRUE if to be closed and reinitialized. |
| ARCCore.PKRelAttributeP | ARCCore | Enum | Describes class -PKRelAttribute-. |
| ARCCore.PP.Invalid | ARCCore | EnumMember | Timestamp when property was invalidated / 'deleted'. |
| ARCCore.ActualConnectionP.MonkeyWrench | ARCCore | EnumMember | |
| ARCCore.PKRelAttributeP.ForeignEntity | ARCCore | EnumMember | The type of foreign entity that this property points to. |
| ARCCore.PP.Iid | ARCCore | EnumMember | Invalidator id, that is entity which set -Invalid- for this property (or removed / 'undid' the invalidation by setting the value to '0001-01-01'). |
| ARCCore.ActualConnectionP.PartnerIPAddress | ARCCore | EnumMember | TODO: Use more strongly typing for this. |
| ARCCore.PKRelAttributeP.OppositeTerm | ARCCore | EnumMember | Example: For 'Employee', the key 'SupervisorId' where the supervisor is another 'Employee', will have another meaning "as seen from" the Supervisor, namely "Subordinates" or similar. |
| ARCCore.PP.ExceptionText | ARCCore | EnumMember | General property for logging of exceptions, usually set through -HandleException-. |
| ARCCore.ConnectionInstructionP | ARCCore | Enum | Describes class -ConnectionInstruction-. |
| ARCCore.PKRelAttributeP.EnforceReferentialIntegrity | ARCCore | EnumMember | If TRUE then referential integrity will be enforced by -TryStore-. |
| ARCCore.PConcurrentP | ARCCore | Enum | Describes class -PConcurrent-. |
| ARCCore.ConnectionInstructionP.ClientId | ARCCore | EnumMember | The AgoRapide node-id for which this connection is relevant. Used for distributing over the -PropertyStream- information to the clients about which possible nodes they can connect to. |
| ARCCore.PKTypeAttributeP | ARCCore | Enum | Describes class -PKTypeAttribute-. |
| ARCCore.PConcurrentP.Heartbeat | ARCCore | EnumMember | |
| ARCCore.ConnectionInstructionP.ServerHostName | ARCCore | EnumMember | The host (DNS or IP-address) for which to connect. |
| ARCCore.PKTypeAttributeP.Type | ARCCore | EnumMember | The type of this Property. |
| ARCCore.ActualConnectionP | ARCCore | Enum | Describes class -ActualConnection-. |
| ARCCore.ConnectionInstructionP.ServerPortNo | ARCCore | EnumMember | The port number for which to connect. |
| ARCCore.PKTypeAttributeP.DefaultValue | ARCCore | EnumMember | The default value. |
| ARCCore.ActualConnectionP.Id | ARCCore | EnumMember | When connection is used with-StreamProcessor-, the Id should be the same as the key used in the incoming / outgoing connection dictionary collection. |
| ARCCore.StorageFileP.Hash | ARCCore | EnumMember | Hash of storage file. Not implemented as of Apr 2020. It is envisaged to store hash-value as last line in storage file. In this case the hash must be the hash of the file excluding the last line |
| ARCCore.ConnectionInstructionP.ConnectionId | ARCCore | EnumMember | Usually a combination of -ClientId-, -ServerHostName- and -ServerPortNo-. |
| ARCCore.StreamProcessorP.UnderClosure | ARCCore | EnumMember | Set to TRUE if to be closed, whenever an exception occurs or when class goes out of scope |
| ARCCore.ConnectionDirection | ARCCore | Enum | The concept of who took the initiative for the connections (who asked to open the TCP/IP session). |
| ARCCore.ConnectionInstructionP.DataTransferDirection | ARCCore | EnumMember | |
| ARCCore.StreamProcessorP.WriteToConsole | ARCCore | EnumMember | If true then incoming data (from other nodes will be written to console. |
| ARCCore.ConnectionDirection.Incoming | ARCCore | EnumMember | ConnectionInstruction will not be set for these. |
| ARCCore.ConnectionInstructionP.Subscription | ARCCore | EnumMember | The actual subscripton. This is what the connecting party / (downstream) client would send over its TCP/IP connection to the (upstream) server. |
| ARCCore.StreamProcessorP.Timestamp | ARCCore | EnumMember | The timestamp inserted at regular intervals in the -PropertyStream- according to -TimestampResolution-. |
| ARCCore.ConnectionDirection.Outgoing | ARCCore | EnumMember | There would normally exist two live outgoing connection at a given point in time for -Client- / -ArmDB-: |
| ARCCore.ConnectionInstructionP.MultipleConnectionUsage | ARCCore | EnumMember | |
| ARCCore.StreamProcessorP.TimestampIsOld | ARCCore | EnumMember | A warning sent by -StreamProcessor- to -OutsideLocalReceiver- when it knows that data as served is out of date. |
| ARCCore.DataTransferDirection | ARCCore | Enum | Direction for transfer of data. |
| ARCCore.ConnectionInstructionP.Sharding | ARCCore | EnumMember | |
| ARCCore.StreamProcessorP.TimestampResolution | ARCCore | EnumMember | The time interval between each timestamp update in the -PropertyStream-. |
| ARCCore.DataTransferDirection.Send | ARCCore | EnumMember | Like -Client- sending in-application generated properties to -ArmDB- / -CoreDB- or -ArmDB- sending data received over an incoming connection to -CoreDB-. |
| ARCCore.MultipleConnectionUsage | ARCCore | Enum | Enables fault-tolerance by describing use of multiple connections |
| ARCCore.StreamProcessorP.DoNotStoreLocally | ARCCore | EnumMember | For -Client-, incoming data (as received from a -Outgoing-) is possible to store BOTH to disk, AND to (normally) a -PRich-. |
| ARCCore.DataTransferDirection.Receive | ARCCore | EnumMember | Like -Client- receiving data from an upstream -ArmDB- / -CoreDB- or -ArmDB- receiving data from an upstream -CoreDB-. |
| ARCCore.MultipleConnectionUsage.Admin | ARCCore | EnumMember | Connection is a special administrative connection to a central 'command-and-control' server which instructs which connections to make. |
| ARCCore.StreamProcessorP.DoNotStoreLocalOriginLocally | ARCCore | EnumMember | Means 'do not store local origin locally but wait until it gets confirmed by core storage'. |
| ARCCore.TPropertyKeyEnum | ARCCore | Enum | Placeholder for any enum type suitable as generic type parameter for -PExact-. |
| ARCCore.MultipleConnectionUsage.RoundRobin | ARCCore | EnumMember | This connection to be used in a turn based system, together with other connections with -RoundRobin-. |
| ARCCore.StreamProcessorP.CacheDiskWrites | ARCCore | EnumMember | If TRUE then will write the -PropertyStream- to disk in bigger chunks, thereby increasing performance. |
| Assembly ARCDoc | Assembly | A library supporting documentation and demonstrating usage of AgoRapide. | |
| ARCCore.MultipleConnectionUsage.Simultaneous | ARCCore | EnumMember | This connection to be used simultaneously with other connections with -Simultaneous- |
| ARCCore.StreamProcessorP.CopyFileStructureFromCore | ARCCore | EnumMember | If TRUE, will copy the exact file structure (through information given in -ClientUpdatePosition-). |
| ARCDoc.Apple | ARCDoc | Class | The most 'standard' way of implementing an entity-class in AgoRapide, by just inheriting -PRich-. |
| ARCCore.StreamProcessorP | ARCCore | Enum | Describes class -StreamProcessor-. |
| ARCCore.StreamProcessorP.CountIncomingConnections | ARCCore | EnumMember | |
| ARCDoc.Apple.AddName | ARCDoc | ClassMember | Convenience method, not obligatory. |
| ARCCore.StreamProcessorP.LocalStorageFolder | ARCCore | EnumMember | The local path to which new properties are stored. Should NOT end with any trailing DirectorySeparatorChar |
Generated 2025-12-05 05:57:56.786 UTC