[ROOT]  doc  DocFrag  SELECT Assembly, DocFragType, Description.FirstLine()   <  SKIP 75  >   <  TAKE 128  >   

128 items

DocFragIdAssemblyDocFragTypeDescription.FirstLine()
ARCCore.EnumAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.EnumAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.EnumMemberAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.ExtensionsARCCoreClassContains a few general nice to have extensions methods.
ARCCore.EnumMemberAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.Extensions.ToStringVeryShortARCCoreClassMemberReturns same as -ToStringShort- but without any generics information at all.
ARCCore.Extensions.UseARCCoreClassMemberConvenience method that shortens down code in cases where an instance of an object must be created first in order to use that same variable multiple times
ARCCore.Extensions.SingleARCCoreClassMemberSame as inbuilt LINQ's Single except that gives a more friendly exception message
ARCCore.Extensions.AddValueARCCoreClassMemberGives better error messages compared to 'original' Add when adding a value to a directory if key already exists
ARCCore.Extensions.SingleOrDefaultARCCoreClassMemberSame as inbuilt LINQ's SingleOrDefault except that gives a more friendly exception message
ARCCore.Extensions.ToStringWithMSARCCoreClassMemberUses either format 'd\.hh\:mm\:ss\.fff' or 'hh\:mm\:ss\.fff' depending on TotalHours >=24 hours or not.
ARCCore.IKIP.AssertTypeIntegrityARCCoreClassMemberSee -TryAssertTypeIntegrity- for documentation.
ARCCore.IKIPARCCoreClassContainer class for key (-IK-), and value (-IP-).
ARCCore.IKIP.TryAssertTypeIntegrityARCCoreClassMemberAsserts that value is of correct type as specified by the key.
ARCCore.IKCoded.FromCacheEncodedARCCoreClassMemberReduces number of objects generated by caching those known to be within a limited range
ARCCore.IKCoded.EnrichKeyARCCoreClassMember'Implementing' -ITypeDescriber-.
ARCCore.IKCoded.FromCacheUnencodedARCCoreClassMemberReduces number of objects generated by caching those known to be within a limited range
ARCCore.IKCoded.TryCheckValidEncodedValueARCCoreClassMemberChecks if encoded value is valid.
ARCCore.IKCoded.AllowedEncodedCharactersARCCoreClassMemberThe character set 'A...Za...z0...9-_().,='.
ARCCore.IKCoded.ToStringARCCoreClassMemberReturns -Encoded-'s string representation.
ARCCore.IKDateARCCoreClassA more memory efficient alternative to -IKString- (together with -IKLong-).
ARCCore.IKCoded.EncodedARCCoreClassMemberThis string value can be used directly in folder names, file names and HTTP URL's without any further encoding being necessary.
ARCCore.IKLong.op_EqualityARCCoreClassMemberIt is quite natural in the code to write code like "if (a.CustomerId == b.CustomerId)", therefore the need to implement == and != operators here.
ARCCore.IKDate.ValidDateTimeFormatsARCCoreClassMemberNote: Be very careful about expanding this array. ToString must be considered, and also how Equals should work with other sub classes of IK.
ARCCore.IKLong.EnrichKeyARCCoreClassMember'Implementing' -ITypeDescriber-.
ARCCore.IKLongARCCoreClassA more memory efficient alternative to -IKString-.
ARCCore.ITypeDescriber.GetSyntaxHelpARCCoreClassMemberEnables explanation of syntax in different contexts from one source:
ARCCore.IKString.FromStringARCCoreClassMemberNote how uses instance cache if already exists there
ARCCore.ParseResultARCCoreClassNOTE: Concept is very old, from the dark ages of AgoRapide's very first inception. There might be room for improvement.
ARCCore.IKString.op_EqualityARCCoreClassMemberIt is quite natural in the code to write code like "if (a.CustomerId == b.CustomerId)", therefore the need to implement == and != operators here.
ARCCore.PK.TryGetAARCCoreClassMemberConvenience method for easy access to -BasePKAttribute-.
ARCCore.ParseResult.ResultARCCoreClassMemberWill be null if ErrorResponse is set.
ARCCore.PK.ModifyCleanerAndValidatorAndParserForCardinalityARCCoreClassMemberCalled from -Initialize- after _cleaner and _validatorAndParser have been set.
ARCCore.ParseResult.ErrorResponseARCCoreClassMemberWill be null if Result is set
ARCCore.PK.TryCleanValidateAndParseARCCoreClassMemberCleans and parses the value according to specifications for this property key.
ARCCore.PK.ToStringARCCoreClassMemberCaching is supposed to be useful because may be called quite often.
ARCCore.PK.PackParseResultForStorageInEntityObjectARCCoreClassMemberPacks result of parsing into a -IP--derived class, suitable for sending to -AddOrUpdateP-.
ARCCore.PK.TryValidateAndParseARCCoreClassMemberParses the value according to specifications for this property key.
ARCCore.PK.GetTypeMappingARCCoreClassMemberReturns the relevant property key for a given type entity-type and field-type.
ARCCore.PK.TryGetFromTypeAndFieldName Overload1ARCCoreClassMemberReturns property key based on type and field name.
ARCCore.PK.GetObligatoryValuesForEntityTypeARCCoreClassMemberReturns all obligatory values (based on -IsObligatory-)
ARCCore.PK.GetAllPKForEntityTypeARCCoreClassMemberReturns all property keys relevant for the given entity type,
ARCCore.PK.EqualsARCCoreClassMemberNote that ToString is only based on __enum, meaning that two enum members / enum values with same name but different type, like CustomerP.Name and OrderP.Name, will be considered equal.
ARCCore.PK.GetAllPKForEntityTypeStringARCCoreClassMemberReturns all property keys relevant for the given entity type,
ARCCore.PK.TryGetPARCCoreClassMemberMade virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway.
ARCCore.PK.BuildFromStringCacheARCCoreClassMemberBuilds the content of -_fromStringCache- and also -_allPKForEntityTypeCache-.
ARCCore.PKHTMLAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.PK.ValidatorAndParserARCCoreClassMemberValidates and parses a value.
ARCCore.PKHTMLAttribute.EncoderARCCoreClassMemberSee -Encoder-.
ARCCore.PK.CleanerARCCoreClassMemberCleanup of values, to be used before value is attempted validated.
ARCCore.PKHTMLAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.PK.AllEnumsARCCoreClassMemberAll enums for the whole application.
ARCCore.IHTMLEncoderARCCoreClassPseudo-interface signifying that implementing class has a static metod called 'Encode' for encoding a string to HTML.
ARCCore.PK.AllPKEnumsARCCoreClassMemberAll -PropertyKeyEnum--tagged enums for the whole application.
ARCCore.PKTypeAttributeARCCoreClassContains the most basic essential information about a property key, like its description, -Type-, -Cardinality-, -IsObligatory- and -DefaultValue-.
ARCCore.PKLogAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.PKTypeAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.PKRelAttributeARCCoreClassDescribes relationships between entities (between tables in RDBMS terms).
ARCCore.PKTypeAttribute.StandardValidatorAndParserARCCoreClassMemberReturns validator and parser for well known types like string, int, long, bool, DateTime, TimeSpan, Type, Uri.
ARCCore.PKRelAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.PKTypeAttribute.StandardCleanerARCCoreClassMemberReturns a cleaner for well known types like bool
ARCCore.PKRelAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.IP.TryAssertIntegrityARCCoreClassMemberAsserts the integrity of this entity.
ARCCore.PKTypeAttribute.IsObligatoryARCCoreClassMemberSee -IsObligatory-.
ARCCore.IP.ToStringARCCoreClassMemberThe ToString()-implementation in the classes implementing this interface is supposed to give a short concise representation of the object for debugging and logging purposes, that is, intended for human consumption. The most 'important' implementation is probably the one in -PRich- (-ToString-) because that one is often the basis for your entity classes like 'Customer', 'Order' and so on
ARCCore.PKTypeAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.IP.TrySetPPARCCoreClassMemberSetPP = set property of property. Sets property of entity contained within this class.
ARCCore.IPARCCoreClassIP = IProperty.
ARCCore.IP.GetKeysEqualToValueARCCoreClassMemberReturns properties which themselves again have key and value equal to the given key and value.
ARCCore.IP.TryGetV Overload2ARCCoreClassMemberThe actual value of the property. Mostly relevant for single-value properties like -PValue-.
ARCCore.IP.GetOrAddPVARCCoreClassMemberGets value. If not set then value will be added
ARCCore.IP.OnTrySetPARCCoreClassMemberEvent handler to be called by -TrySetP- before it changes a property value (but AFTER it has done any validity checks, that is, after it has 'decided' to return TRUE, in other words, event handler should be called when change is guaranteed to go through, but before it actually has been done).
ARCCore.IP.GetPVARCCoreClassMemberGets a single property's value for this object. Returns default value if not successful.
ARCCore.IP.TryGetPARCCoreClassMemberGets a single property for this object
ARCCore.IP.TryGetPVARCCoreClassMemberGets a single property's value for the given property key.
ARCCore.IP.ToPropertyStreamARCCoreClassMemberTurns object into a -PropertyStream-
ARCCore.IP.IsValidARCCoreClassMemberNote that by default all properties are 'valid' but because of -NoRealDeletion-, we must have a mechanism for invalidating properties. This property returns FALSE if property has been invalidated and timestamp for invalidation is not '0001-01-01'.
ARCCore.IP.ToJSONSerializeableARCCoreClassMemberPrepares the data into a format acceptable for System.Text.Json.JsonSerializer.Serialize.
ARCCore.IP.AllIPDerivedTypesWithPKEnumApplicationSpecificARCCoreClassMemberAll relevant -IP--derived types for the -ApplicationSpecificCode- part of the application for which also is defined a -PropertyKeyEnum-.
ARCCore.IP.ItemARCCoreClassMemberOffers string-based direct indexing.
ARCCore.IP.AllIPDerivedEntityCollectionClassesDictARCCoreClassMemberAll -IP--derived types for which is found a corresponding class with name like '{EntityType}Collection'
ARCCore.IP.KeysARCCoreClassMemberReturns all the keys for this instance.
ARCCore.IP.AllIPDerivedTypesInludingGenericAndAbstractARCCoreClassMemberAll relevant -IP--derived types (except the interface -IP- itself) known to the application.
ARCCore.IP.ValuesARCCoreClassMemberReturns all the values (all the properties) for this instance.
ARCCore.IP.AllIPDerivedTypesDictARCCoreClassMemberProvides lookup of a type in -AllIPDerivedTypes- given its string representation.
ARCCore.IP.LoggerARCCoreClassMemberDescribes a logger.
ARCCore.PExact<TEnumType>.SetPVDirectARCCoreClassMemberHigh performance alternative to -TrySetP-, accessing -Storage- more direct.
ARCCore.IP.AllIPDerivedTypesDictIKTypeARCCoreClassMemberSame as -AllIPDerivedTypesDict- except that value is -IKType-, not string.
ARCCore.PExact<TEnumType>.GetPVDirectARCCoreClassMemberHigh performance alternative to -TryGetP-, accessing -Storage- more direct.
ARCCore.PARCCoreClass'Dummy'-class, not necessarily in use. See -PP- for more information. Created because of the concept of CorrespondingClass which is strictly enforced
ARCCore.PExact<TEnumType>.TryGetPVDirectARCCoreClassMemberHigh performance alternative to -TryGetP-, accessing -Storage- more direct.
ARCCore.P.TryGetPARCCoreClassMemberMade virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway.
ARCCore.PExact<TEnumType>.ToStringARCCoreClassMemberTODO: Decide on what we actually want with ToString for this class.
ARCCore.P.TryGetVARCCoreClassMemberNote that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.IIKII.PackParseResultForStorageInIKIIARCCoreClassMemberThis method corresponds to -PackParseResultForStorageInEntityObject-.
ARCCore.PIIARCCoreClassPII = property for storing individual items.
ARCCore.IIKII.PackObjectForStorageInIKIIARCCoreClassMemberThis method corresponds to -PackObjectForStorageInEntityObject-.
ARCCore.PII.TryGetVARCCoreClassMemberSince value is stored in keys, we need to override this method.
ARCCore.PReadOnlyARCCoreClassExperimental (from Feb 2022) class suitable for classes that do not need to be deserialized, or to accept write requests through -PropertyAccess-.
ARCCore.PII.TryGetPARCCoreClassMemberMade virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway.
ARCCore.PRichARCCoreClassFully flexible storage. Can store anything. Typical inherited for entity representations like 'Customer' or 'Order'.
ARCCore.PII.ToStringARCCoreClassMemberTODO: Decide on what we actually want with ToString for this class.
ARCCore.ActualConnection.SendARCCoreClassMemberSends all messages in queue.
ARCCore.PRich.ToStringARCCoreClassMemberTODO: Decide on what we actually want with ToString for this class.
ARCCore.ActualConnection.ToStringARCCoreClassMemberTODO: Decide on what we actually want with ToString for this class.
ARCCore.PValue<T>ARCCoreClassSingle value storage.
ARCCore.ActualConnection..ctorARCCoreClassMemberNote parameter-less constructor as desired for all classes inheriting -IP-.
ARCCore.PValue<T>.TrySetPARCCoreClassMemberNOTE: -TryStore- is explicit aware that -PValue- and -PValueEmpty-
ARCCore.MonkeyWrenchARCCoreClassDescribes level of 'spanner-throwing' this connection shall contibute with
ARCCore.PValue<T>.TryGetVARCCoreClassMemberSupports duck typing.
ARCCore.ClientUpdatePositionARCCoreClassDescribes from WHERE (from WHEN) in the historic -PropertyStream- new data is to be returned.
ARCCore.PValue<T>.ConvertObjectToStringARCCoreClassMemberConverts object to string.
ARCCore.ClientUpdatePosition.FilenameARCCoreClassMemberFilename like '2020-04-03 08:42:22_R001'
ARCCore.PValue<T>.ToStringARCCoreClassMemberDo no cache this value, because memory consumption would then increase significantly in your applicationj
ARCCore.ClientUpdatePosition.IndexARCCoreClassMemberIndex (zero-based) into file. Value of -1 means blank update status / no data received at all (or no data received for this specific filename)
ARCCore.PValue<T>.DeepCopyARCCoreClassMemberNote that if the generic type (T) is not immutable, then what we return will not be a truly deep copy.
ARCCore.ClientUpdatePosition.ClientDatastoreIsEmptyARCCoreClassMemberUsed by the subscribing client to signify that it has no data stored locally, and it therefore needs an update from the beginning of the -PropertyStream-, that is, 'from the beginning of time'.
ARCCore.PValue<T>..ctorARCCoreClassMemberNote how this class does not have a parameter-less constructor (unlike all other -IP--derived classes in AgoRapide)
ARCCore.BaseAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.BasePKAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.ClassAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.ClassAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.EnumAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.EnumMemberAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.IPAttributeARCCoreClassDescribes -IP- classes (describes at class-level)
ARCCore.Extensions.ToStringShortARCCoreClassMemberReturns a shorter representation than -ToStringDB-.
ARCCore.Extensions.KeysAsStringARCCoreClassMemberGives a compressed overview of keys in a dictionary. Helpful for building exception messages.
ARCCore.Extensions.GetValueARCCoreClassMemberGives better error messages when reading value from directory if key does not exist

Generated 2025-09-24 16:14:00.727 UTC