[ROOT]  doc  DocFrag  SELECT Assembly, DocFragType, Description.FirstLine()   <  SKIP 8  >   <  TAKE 124  >   

124 items

DocFragIdAssemblyDocFragTypeDescription.FirstLine()
ARCCore.BasePKAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.ClassAttributeARCCoreClassDescribes a class.
ARCCore.ClassAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.ClassAttribute.GetAttributeARCCoreClassMemberThrows exception if type implements -IP- and no corresponding enum found (enum ending with capital letter 'P' (like 'CustomerP' for enum describing class 'Customer' for instance)
ARCCore.ClassAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.ClassAttribute.TryGetAsTypeScriptARCCoreClassMemberGenerates typescript code corresponding to the class which this instance describes.
ARCCore.ClassAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.ClassMemberAttributeARCCoreClassDescribes a member of a class (a method).
ARCCore.ClassMemberAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.ClassMemberAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.EnumAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.ClassMemberAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.EnumAttribute.TryGetAsTypeScriptARCCoreClassMemberGenerates typescript code corresponding to the enum which this instance describes.
ARCCore.EnumAttributeARCCoreClassDescribes an enum.
ARCCore.EnumMemberAttributeARCCoreClassDescribes an enum's value.
ARCCore.EnumAttribute.GetAttributeARCCoreClassMemberThrows exception if tagged as -PropertyKeyEnum- and name of type does not end with capital letter 'P' (like 'CustomerP' for enum describing class 'Customer' for instance).
ARCCore.EnumMemberAttribute.GetAttributeARCCoreClassMemberNote that illegal to call for -PropertyKeyEnum-.
ARCCore.EnumAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.EnumMemberAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.EnumAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.EnumMemberAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.EnumMemberAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.CardinalityExtensionsARCCoreClass 
ARCCore.IPAttributeARCCoreClassDescribes -IP- classes (describes at class-level)
ARCCore.CardinalityExtensions.IsMultipleARCCoreClassMemberReturns TRUE if given cardinality implies that multiple items are stored simultaneously in a typical in-memory data storage.
ARCCore.ExtensionsARCCoreClassContains a few general nice to have extensions methods.
ARCCore.Extensions.ToStringVeryShortARCCoreClassMemberReturns same as -ToStringShort- but without any generics information at all.
ARCCore.Extensions.ToStringShortARCCoreClassMemberReturns a shorter representation than -ToStringDB-.
ARCCore.Extensions.ToStringDBARCCoreClassMemberGives the minimum representation of type as string suitable for later reconstruction by -GetType-.
ARCCore.Extensions.ForEachARCCoreClassMemberUseful when we want to write collection.ForEach( ... ) instead of
ARCCore.Extensions.AddValueARCCoreClassMemberGives better error messages compared to 'original' Add when adding a value to a directory if key already exists
ARCCore.Extensions.UseARCCoreClassMemberConvenience method that shortens down code in cases where an instance of an object must be created first in order to use that same variable multiple times
ARCCore.Extensions.KeysAsStringARCCoreClassMemberGives a compressed overview of keys in a dictionary. Helpful for building exception messages.
ARCCore.Extensions.GetValueARCCoreClassMemberGives better error messages when reading value from directory if key does not exist
ARCCore.Extensions.SingleOrDefaultARCCoreClassMemberSame as inbuilt LINQ's SingleOrDefault except that gives a more friendly exception message
ARCCore.Extensions.SingleARCCoreClassMemberSame as inbuilt LINQ's Single except that gives a more friendly exception message
ARCCore.Extensions.ResultARCCoreClassMemberReturns heading plus return-value of function (calls function). If function == null then empty string is returned
ARCCore.Extensions.ToStringDateAndTimeARCCoreClassMemberUses format 'yyyy-MM-dd HH:mm:ss.fff'.
ARCCore.IKIPARCCoreClassContainer class for key (-IK-), and value (-IP-).
ARCCore.Extensions.ToStringWithMSARCCoreClassMemberUses either format 'd\.hh\:mm\:ss\.fff' or 'hh\:mm\:ss\.fff' depending on TotalHours >=24 hours or not.
ARCCore.IKIP.AssertTypeIntegrityARCCoreClassMemberSee -TryAssertTypeIntegrity- for documentation.
ARCCore.IKIP.TryAssertTypeIntegrityARCCoreClassMemberAsserts that value is of correct type as specified by the key.
ARCCore.IKCoded.TryCheckValidEncodedValueARCCoreClassMemberChecks if encoded value is valid.
ARCCore.IKARCCoreClassIK = Interface Key / Index key. Key used to lookup 'inside' an instance of -IP-.
ARCCore.IKCoded.FromCacheEncodedARCCoreClassMemberReduces number of objects generated by caching those known to be within a limited range
ARCCore.IKCodedARCCoreClassUnderstands coded and unencoded variants of -IK-.
ARCCore.IKCoded.FromCacheUnencodedARCCoreClassMemberReduces number of objects generated by caching those known to be within a limited range
ARCCore.IKCoded.EnrichKeyARCCoreClassMember'Implementing' -ITypeDescriber-.
ARCCore.IKCoded.FromEncodedARCCoreClassMemberNote how uses instance cache if already exists there.
ARCCore.IKCoded.TryEncodeARCCoreClassMemberReturns a string containing only characters in -AllowedEncodedCharacters-.
ARCCore.IKDateARCCoreClassA more memory efficient alternative to -IKString- (together with -IKLong-).
ARCCore.IKCoded.ToStringARCCoreClassMemberReturns -Encoded-'s string representation.
ARCCore.IKDate.op_EqualityARCCoreClassMemberIt is quite natural in the code to write code like "if (a.CustomerId == b.CustomerId)", therefore the need to implement == and != operators here.
ARCCore.IKCoded.EncodedARCCoreClassMemberThis string value can be used directly in folder names, file names and HTTP URL's without any further encoding being necessary.
ARCCore.IKDate.EnrichKeyARCCoreClassMember'Implementing' -ITypeDescriber-.
ARCCore.IKCoded.AllowedEncodedCharactersARCCoreClassMemberThe character set 'A...Za...z0...9-_().,='.
ARCCore.IKDate.ValidDateTimeFormatsARCCoreClassMemberNote: Be very careful about expanding this array. ToString must be considered, and also how Equals should work with other sub classes of IK.
ARCCore.IKLongARCCoreClassA more memory efficient alternative to -IKString-.
ARCCore.IKString.FromCacheARCCoreClassMemberReduces number of objects generated by caching those known to be within a limited range
ARCCore.IKLong.op_EqualityARCCoreClassMemberIt is quite natural in the code to write code like "if (a.CustomerId == b.CustomerId)", therefore the need to implement == and != operators here.
ARCCore.IKString.FromStringARCCoreClassMemberNote how uses instance cache if already exists there
ARCCore.IKLong.EnrichKeyARCCoreClassMember'Implementing' -ITypeDescriber-.
ARCCore.IKString.op_EqualityARCCoreClassMemberIt is quite natural in the code to write code like "if (a.CustomerId == b.CustomerId)", therefore the need to implement == and != operators here.
ARCCore.IKStringARCCoreClassIndex key for any general id, like primary-key or sequence-number or similar.
ARCCore.IKString.EnrichKeyARCCoreClassMember'Implementing' -ITypeDescriber-.
ARCCore.IKTypeARCCoreClassIndex key used when storing a collection of a given type, like 'Customer'.
ARCCore.ParseResultARCCoreClassNOTE: Concept is very old, from the dark ages of AgoRapide's very first inception. There might be room for improvement.
ARCCore.IKType.ToStringARCCoreClassMemberCaching is supposed to be useful because may be called quite often.
ARCCore.ParseResult.ResultARCCoreClassMemberWill be null if ErrorResponse is set.
ARCCore.ITypeDescriberARCCoreClassProvides a standardized mechanism for describing single-property values (like 'PhoneNumber' of 'Customer' for instance).
ARCCore.ParseResult.ErrorResponseARCCoreClassMemberWill be null if Result is set
ARCCore.ITypeDescriber.GetSyntaxHelpARCCoreClassMemberEnables explanation of syntax in different contexts from one source:
ARCCore.PKARCCoreClassPK = AgoRapide PropertyKey.
ARCCore.PK.TryGetEnumARCCoreClassMemberNote that usually you will not have to ask for this value, usually in AgoRapide it goes the other way around, you have the enum member / enum value and want the corresponding property key.
ARCCore.PK.ModifyCleanerAndValidatorAndParserForCardinalityARCCoreClassMemberCalled from -Initialize- after _cleaner and _validatorAndParser have been set.
ARCCore.PK.TryGetVARCCoreClassMemberOnly type of PK, string or type of __enum is allowed to ask for (as TRequest generic type parameter).
ARCCore.PK.ToStringARCCoreClassMemberCaching is supposed to be useful because may be called quite often.
ARCCore.PK.GetAARCCoreClassMemberConvenience method for easy access to -BasePKAttribute- with corresponding explaining exception if fails
ARCCore.PK.TryValidateAndParseARCCoreClassMemberParses the value according to specifications for this property key.
ARCCore.PK.TryGetAARCCoreClassMemberConvenience method for easy access to -BasePKAttribute-.
ARCCore.PK.TryCleanValidateAndParseARCCoreClassMemberCleans and parses the value according to specifications for this property key.
ARCCore.PK.PackParseResultForStorageInEntityObjectARCCoreClassMemberPacks result of parsing into a -IP--derived class, suitable for sending to -AddOrUpdateP-.
ARCCore.PK.TryGetFromTypeAndFieldName Overload2ARCCoreClassMemberReturns property key based on type and field name.
ARCCore.PK.PackObjectForStorageInEntityObjectARCCoreClassMemberSee -PackParseResultForStorageInEntityObject- for documentation.
ARCCore.PK.TryGetFromTypeAndFieldName Overload1ARCCoreClassMemberReturns property key based on type and field name.
ARCCore.PK.FromEnumARCCoreClassMemberReturns the corresponding -PK- instance from the given -PropertyKeyEnum-.
ARCCore.PK.GetAllPKForEntityTypeARCCoreClassMemberReturns all property keys relevant for the given entity type,
ARCCore.PK.TryGetFromTypeAndFieldName Overload3ARCCoreClassMemberReturns property key based on type and field name.
ARCCore.PK.GetAllPKForEntityTypeStringARCCoreClassMemberReturns all property keys relevant for the given entity type,
ARCCore.PK.TryGetPARCCoreClassMemberMade virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway.
ARCCore.PK.BuildFromStringCacheARCCoreClassMemberBuilds the content of -_fromStringCache- and also -_allPKForEntityTypeCache-.
ARCCore.PK..ctorARCCoreClassMemberConstructor with 'object _enum' is necessary in order for ToString to work.
ARCCore.PK.GetTypeMappingARCCoreClassMemberReturns the relevant property key for a given type entity-type and field-type.
ARCCore.PK.TypeARCCoreClassMemberReturns type from -PKTypeAttribute-'s -Type-.
ARCCore.PK.GetObligatoryValuesForEntityTypeARCCoreClassMemberReturns all obligatory values (based on -IsObligatory-)
ARCCore.PK.CardinalityARCCoreClassMemberReturns cardinality from -PKTypeAttribute-'s -Cardinality-.
ARCCore.PK.EqualsARCCoreClassMemberNote that ToString is only based on __enum, meaning that two enum members / enum values with same name but different type, like CustomerP.Name and OrderP.Name, will be considered equal.
ARCCore.PK.CorrespondingClassARCCoreClassMemberReturns -CorrespondingClass- based on -__enum-.
ARCCore.PK.AllPKEnumsARCCoreClassMemberAll -PropertyKeyEnum--tagged enums for the whole application.
ARCCore.PK.ValidatorAndParserARCCoreClassMemberValidates and parses a value.
ARCCore.PK.__enumARCCoreClassMemberThis information is also found as EnumMember.
ARCCore.PK.CleanerARCCoreClassMemberCleanup of values, to be used before value is attempted validated.
ARCCore.PKHTMLAttributeARCCoreClassContains pointer to HTML encoder for a property.
ARCCore.PK.AllEnumsARCCoreClassMemberAll enums for the whole application.
ARCCore.PKHTMLAttribute.EncodeARCCoreClassMemberEncodes the given string to HTML format through the static method implemented in class -Encoder-.
ARCCore.PKHTMLAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.PKLogAttribute.DoNotLogAtAllARCCoreClassMemberSee -DoNotLogAtAll-.
ARCCore.PKHTMLAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.PKLogAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.PKHTMLAttribute.EncoderARCCoreClassMemberSee -Encoder-.
ARCCore.PKRelAttributeARCCoreClassDescribes relationships between entities (between tables in RDBMS terms).
ARCCore.PKHTMLAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.PKRelAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.IHTMLEncoderARCCoreClassPseudo-interface signifying that implementing class has a static metod called 'Encode' for encoding a string to HTML.
ARCCore.PKRelAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.PKLogAttributeARCCoreClassExplains how logging of changes to a property should be done.
ARCCore.PKRelAttribute.ForeignEntityARCCoreClassMemberSee -ForeignEntity-.
ARCCore.PKLogAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.PKRelAttribute.OppositeTermARCCoreClassMemberSee -OppositeTerm-.
ARCCore.PKLogAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.PKRelAttribute.EnforceReferentialIntegrityARCCoreClassMemberSee -EnforceReferentialIntegrity-.
ARCCore.PKTypeAttribute.DefaultValueARCCoreClassMemberSee -DefaultValue-.
ARCCore.PKRelAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.PKTypeAttribute.IsObligatoryARCCoreClassMemberSee -IsObligatory-.

Generated 2025-06-21 09:02:26.299 UTC