[ROOT] doc DocFrag SELECT Assembly, DocFragType, Description.FirstLine() < SKIP 104 > < TAKE 496 >
496 items
DocFragId | Assembly | DocFragType | Description.FirstLine() |
---|---|---|---|
ARCDoc.PKDocAttribute.PriorityOrder | ARCDoc | ClassMember | See -PriorityOrder-. |
ARCCore.IKString.op_Equality | ARCCore | ClassMember | It is quite natural in the code to write code like "if (a.CustomerId == b.CustomerId)", therefore the need to implement == and != operators here. |
ARCCore.IKString | ARCCore | Class | Index key for any general id, like primary-key or sequence-number or similar. |
ARCDoc.PKDocAttribute.IsDefault | ARCDoc | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
ARCCore.IKString.EnrichKey | ARCCore | ClassMember | 'Implementing' -ITypeDescriber-. |
ARCCore.IKType | ARCCore | Class | Index key used when storing a collection of a given type, like 'Customer'. |
ARCDoc.DocFragType.ClassMember | ARCDoc | EnumMember | |
ARCCore.ParseResult | ARCCore | Class | NOTE: Concept is very old, from the dark ages of AgoRapide's very first inception. There might be room for improvement. |
ARCCore.IKType.ToString | ARCCore | ClassMember | Caching is supposed to be useful because may be called quite often. |
ARCDoc.DocFragType.Enum | ARCDoc | EnumMember | |
ARCCore.ParseResult.Result | ARCCore | ClassMember | Will be null if ErrorResponse is set. |
ARCCore.ITypeDescriber | ARCCore | Class | Provides a standardized mechanism for describing single-property values (like 'PhoneNumber' of 'Customer' for instance). |
ARCDoc.DocFragType.EnumMember | ARCDoc | EnumMember | |
ARCCore.ParseResult.ErrorResponse | ARCCore | ClassMember | Will be null if Result is set |
ARCCore.ITypeDescriber.GetSyntaxHelp | ARCCore | ClassMember | Enables explanation of syntax in different contexts from one source: |
ARCDoc.DocLinkP | ARCDoc | Enum | Describes class -DocLink-. |
ARCCore.PK | ARCCore | Class | PK = AgoRapide PropertyKey. |
ARCCore.PK.ModifyCleanerAndValidatorAndParserForCardinality | ARCCore | ClassMember | Called from -Initialize- after _cleaner and _validatorAndParser have been set. |
ARCDoc.DocLinkP.Location | ARCDoc | EnumMember | The location that this link points to. |
ARCCore.PK.TryGetEnum | ARCCore | ClassMember | Note that usually you will not have to ask for this value, usually in AgoRapide it goes the other way around, you have the enum member / enum value and want the corresponding property key. |
ARCCore.PK.ToString | ARCCore | ClassMember | Caching is supposed to be useful because may be called quite often. |
ARCDoc.DocLinkP.Filename | ARCDoc | EnumMember | |
ARCCore.PK.TryGetV | ARCCore | ClassMember | Only type of PK, string or type of __enum is allowed to ask for (as TRequest generic type parameter). |
ARCCore.PK.TryValidateAndParse | ARCCore | ClassMember | Parses the value according to specifications for this property key. |
ARCDoc.DocLinkP.LinkWordHTML | ARCDoc | EnumMember | Actual link as it is expected to occur in text, like '-MyCustomerClass<T>-'. |
ARCCore.PK.GetA | ARCCore | ClassMember | Convenience method for easy access to -BasePKAttribute- with corresponding explaining exception if fails |
ARCCore.PK.TryCleanValidateAndParse | ARCCore | ClassMember | Cleans and parses the value according to specifications for this property key. |
ARCDoc.DocLinkResolutionP | ARCDoc | Enum | Describes class -DocLinkResolution- |
ARCCore.PK.TryGetA | ARCCore | ClassMember | Convenience method for easy access to -BasePKAttribute-. |
ARCCore.PK.PackParseResultForStorageInEntityObject | ARCCore | ClassMember | Packs result of parsing into a -IP--derived class, suitable for sending to -AddOrUpdateP-. |
ARCDoc.DocLinkResolutionP.LinkWord | ARCDoc | EnumMember | |
ARCCore.PK.TryGetFromTypeAndFieldName Overload2 | ARCCore | ClassMember | Returns property key based on type and field name. |
ARCCore.PK.PackObjectForStorageInEntityObject | ARCCore | ClassMember | See -PackParseResultForStorageInEntityObject- for documentation. |
ARCDoc.DocLinkResolutionP.DocLinks | ARCDoc | EnumMember | The possible links for -LinkWord- |
ARCCore.PK.TryGetFromTypeAndFieldName Overload1 | ARCCore | ClassMember | Returns property key based on type and field name. |
ARCCore.PK.FromEnum | ARCCore | ClassMember | Returns the corresponding -PK- instance from the given -PropertyKeyEnum-. |
ARCDoc.DocumentatorP | ARCDoc | Enum | Describes class -Documentator-. |
ARCCore.PK.GetAllPKForEntityType | ARCCore | ClassMember | Returns all property keys relevant for the given entity type, |
ARCCore.PK.TryGetFromTypeAndFieldName Overload3 | ARCCore | ClassMember | Returns property key based on type and field name. |
ARCDoc.DummyEnumP | ARCDoc | Enum | TODO: Document better what this is for (and change name) |
ARCCore.PK.GetAllPKForEntityTypeString | ARCCore | ClassMember | Returns all property keys relevant for the given entity type, |
ARCCore.PK.BuildFromStringCache | ARCCore | ClassMember | Builds the content of -_fromStringCache- and also -_allPKForEntityTypeCache-. |
ARCDoc.DummyEnumP._MemberInherited | ARCDoc | EnumMember | Contains not only members which are inherited in the object-oriented sense, but also overrides for which the only documentation was found in base class |
ARCCore.PK.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
ARCCore.PK.GetTypeMapping | ARCCore | ClassMember | Returns the relevant property key for a given type entity-type and field-type. |
ARCDoc.HLocationP | ARCDoc | Enum | Describes class -HLocation-. |
ARCCore.PK..ctor | ARCCore | ClassMember | Constructor with 'object _enum' is necessary in order for ToString to work. |
ARCCore.PK.GetObligatoryValuesForEntityType | ARCCore | ClassMember | Returns all obligatory values (based on -IsObligatory-) |
ARCDoc.HLocationP.Location | ARCDoc | EnumMember | Folder names / hierarchical levels. |
ARCCore.PK.Type | ARCCore | ClassMember | Returns type from -PKTypeAttribute-'s -Type-. |
ARCCore.PK.Equals | ARCCore | ClassMember | Note that ToString is only based on __enum, meaning that two enum members / enum values with same name but different type, like CustomerP.Name and OrderP.Name, will be considered equal. |
ARCDoc.HLocationP.Filename | ARCDoc | EnumMember | Either the last hierarhical key for the content's location, or Index.html if no location. |
ARCCore.PK.Cardinality | ARCCore | ClassMember | Returns cardinality from -PKTypeAttribute-'s -Cardinality-. |
ARCCore.PK.AllPKEnums | ARCCore | ClassMember | All -PropertyKeyEnum--tagged enums for the whole application. |
ARCDoc.HLocationP.ContentType | ARCDoc | EnumMember | The type of the content object. The actual content object is stored as -Content-. |
ARCCore.PK.CorrespondingClass | ARCCore | ClassMember | Returns -CorrespondingClass- based on -__enum-. |
ARCCore.PK.__enum | ARCCore | ClassMember | This information is also found as EnumMember. |
ARCDoc.PKDocAttributeP | ARCDoc | Enum | Describes class -PKDocAttribute-. |
ARCCore.PK.ValidatorAndParser | ARCCore | ClassMember | Validates and parses a value. |
ARCCore.PKHTMLAttribute | ARCCore | Class | Contains pointer to HTML encoder for a property. |
ARCDoc.PKDocAttributeP.PriorityOrder | ARCDoc | EnumMember | Used by -DescribeValue-. |
ARCCore.PK.Cleaner | ARCCore | ClassMember | Cleanup of values, to be used before value is attempted validated. |
ARCCore.PKHTMLAttribute.Encode | ARCCore | ClassMember | Encodes the given string to HTML format through the static method implemented in class -Encoder-. |
ARCDoc.PriorityOrder | ARCDoc | Enum | Used for general sorting / prioritizing when showing properties for an entity. |
ARCCore.PK.AllEnums | ARCCore | ClassMember | All enums for the whole application. |
ARCCore.PKLogAttribute.DoNotLogAtAll | ARCCore | ClassMember | See -DoNotLogAtAll-. |
ARCDoc.PriorityOrder.NotImportant | ARCDoc | EnumMember | |
ARCCore.PKHTMLAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
ARCCore.PKLogAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
ARCDoc.PriorityOrder.Important | ARCDoc | EnumMember | |
ARCCore.PKHTMLAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
ARCCore.PKRelAttribute | ARCCore | Class | Describes relationships between entities (between tables in RDBMS terms). |
Assembly ARCQuery | Assembly | ARCQuery provides a query language that mimicks SQL but is usable through HTTP as GET URLs. | |
ARCCore.PKHTMLAttribute.Encoder | ARCCore | ClassMember | See -Encoder-. |
ARCCore.PKRelAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
ARCQuery.BinaryOperatorKey | ARCQuery | Class | Offers expressions with operators like +, -, * and /. |
ARCCore.PKHTMLAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
ARCCore.PKRelAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
ARCQuery.BinaryOperatorKey.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
ARCCore.IHTMLEncoder | ARCCore | Class | Pseudo-interface signifying that implementing class has a static metod called 'Encode' for encoding a string to HTML. |
ARCCore.PKRelAttribute.ForeignEntity | ARCCore | ClassMember | See -ForeignEntity-. |
ARCQuery.BinaryOperatorKey.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
ARCCore.PKLogAttribute | ARCCore | Class | Explains how logging of changes to a property should be done. |
ARCCore.PKRelAttribute.OppositeTerm | ARCCore | ClassMember | See -OppositeTerm-. |
ARCQuery.BinaryOperatorKey.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
ARCCore.PKLogAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
ARCCore.PKRelAttribute.EnforceReferentialIntegrity | ARCCore | ClassMember | See -EnforceReferentialIntegrity-. |
ARCQuery.BinaryOperatorKey.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
ARCCore.PKLogAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
ARCCore.PKRelAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
ARCQuery.ForeignKey | ARCQuery | Class | Can find related values, through compound field names. |
ARCCore.PKTypeAttribute.DefaultValue | ARCCore | ClassMember | See -DefaultValue-. |
ARCCore.PKTypeAttribute | ARCCore | Class | Contains the most basic essential information about a property key, like its description, -Type-, -Cardinality-, -IsObligatory- and -DefaultValue-. |
ARCQuery.ForeignKey.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
ARCCore.PKTypeAttribute.IsObligatory | ARCCore | ClassMember | See -IsObligatory-. |
ARCCore.PKTypeAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
ARCQuery.ForeignKey.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
ARCCore.PKTypeAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
ARCCore.PKTypeAttribute.StandardValidatorAndParser | ARCCore | ClassMember | Returns validator and parser for well known types like string, int, long, bool, DateTime, TimeSpan, Type, Uri. |
ARCQuery.ForeignKey.AllForeignKeysForEntityType | ARCQuery | ClassMember | Returns all possible foreign keys relevant for the given entity type, like for Order: 'Customer.FirstName' and 'Customer.LastName'. |
ARCCore.IP | ARCCore | Class | IP = IProperty. |
ARCCore.PKTypeAttribute.StandardCleaner | ARCCore | ClassMember | Returns a cleaner for well known types like bool |
ARCQuery.ForeignKey.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
ARCCore.IP.TryGetV Overload2 | ARCCore | ClassMember | The actual value of the property. Mostly relevant for single-value properties like -PValue-. |
ARCCore.PKTypeAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
ARCQuery.ForeignKey.Steps | ARCQuery | ClassMember | The actual -ForeignKeySingleStep- leading to the -ForeignField-. |
ARCCore.IP.Inc | ARCCore | ClassMember | Increments given property key by 1. Sets to 1 if not found. Uses long, not integer. |
ARCCore.PKTypeAttribute.Type | ARCCore | ClassMember | See -Type-. |
ARCQuery.ForeignKey.StepsAreOnlyDirectionToOne | ARCQuery | ClassMember | If TRUE then -TryGetPInternal) will use much simpler code without collections and parallell executions. |
ARCCore.IP.Dec | ARCCore | ClassMember | Decrements given property key by 1. Sets to -1 if not found. Uses long, not integer. |
ARCCore.PKTypeAttribute.Cardinality | ARCCore | ClassMember | See -Cardinality-. |
ARCQuery.ForeignKey.ForeignField | ARCQuery | ClassMember | The actual field in the final foreign entity to return value for. |
ARCCore.IP.Log | ARCCore | ClassMember | The 'final' overload of -Log- that is called by the other overloads. |
ARCCore.IP.LogExecuteTime | ARCCore | ClassMember | Times the execution of the given function and logs details about elapsed time. |
ARCQuery.ForeignKey.AggregateKeys | ARCQuery | ClassMember | Aggregations to be used on the multiple foreign entity values that are found when one of the -Steps- are -ToMany-. |
ARCCore.IP.GetKeysEqualToValue | ARCCore | ClassMember | Returns properties which themselves again have key and value equal to the given key and value. |
ARCCore.IP.HandleException | ARCCore | ClassMember | Note that most relevant to use for -PConcurrent-. |
ARCQuery.ForeignKey.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
ARCCore.IP.OnTrySetP | ARCCore | ClassMember | Event handler to be called by -TrySetP- before it changes a property value (but AFTER it has done any validity checks, that is, after it has 'decided' to return TRUE, in other words, event handler should be called when change is guaranteed to go through, but before it actually has been done). |
ARCCore.IP.TryParseDtr | ARCCore | ClassMember | Parses a PropertyStreamLine- beginning with -dtr-. |
ARCQuery.ForeignKey.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
ARCCore.IP.TryGetP | ARCCore | ClassMember | Gets a single property for this object |
ARCCore.IP.Initialize | ARCCore | ClassMember | Note that has a default implementation (doing nothing). |
ARCQuery.ForeignKey.IPRelationsKeysPointingTo | ARCQuery | ClassMember | Contains, for each (entity type) key, a list of entity types with foreign keys pointing to that entity type. |
ARCCore.IP.ToPropertyStream | ARCCore | ClassMember | Turns object into a -PropertyStream- |
ARCCore.IP.AssertIntegrity | ARCCore | ClassMember | See -TryAssertIntegrity-. |
ARCQuery.ForeignKey.IPRelationsKeysPointingFrom | ARCQuery | ClassMember | Contains, for each (entity type) key, a list of entity types which that entity type points to. |
ARCCore.IP.ToJSONSerializeable | ARCCore | ClassMember | Prepares the data into a format acceptable for System.Text.Json.JsonSerializer.Serialize. |
ARCCore.IP.TryAssertIntegrity | ARCCore | ClassMember | Asserts the integrity of this entity. |
ARCQuery.MemberEntityKey | ARCQuery | Class | Can find value for entity which is member of entity being queried. |
ARCCore.IP.GetValueForJSONSerializer | ARCCore | ClassMember | Practical approach to serializing of -IP- based values to JSON. |
ARCCore.IP.ToString | ARCCore | ClassMember | The ToString()-implementation in the classes implementing this interface is supposed to give a short concise representation of the object for debugging and logging purposes, that is, intended for human consumption. The most 'important' implementation is probably the one in -PRich- (-ToString-) because that one is often the basis for your entity classes like 'Customer', 'Order' and so on |
ARCQuery.MemberEntityKey.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
ARCCore.IP.TrySetP | ARCCore | ClassMember | Set property regardless of whether exists or not. |
ARCCore.IP.TrySetPP | ARCCore | ClassMember | SetPP = set property of property. Sets property of entity contained within this class. |
ARCQuery.MemberEntityKey.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
ARCCore.IP.TryGetV Overload1 | ARCCore | ClassMember | The actual 'unpacking' of the object. |
ARCCore.IP.DeepCopy | ARCCore | ClassMember | Creates a deep copy of this object instance, that is, a copy with all new object instances (except for immutable objects). |
ARCQuery.MemberEntityKey.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
ARCCore.IP.IsValid | ARCCore | ClassMember | Note that by default all properties are 'valid' but because of -NoRealDeletion-, we must have a mechanism for invalidating properties. This property returns FALSE if property has been invalidated and timestamp for invalidation is not '0001-01-01'. |
ARCCore.IP.AddPV Overload2 | ARCCore | ClassMember | NOTE: The different AddPV / AddP overloads should only be used if you want an assertion against the |
ARCQuery.MemberEntityKey.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
ARCCore.IP.Item | ARCCore | ClassMember | Offers string-based direct indexing. |
ARCCore.IP.AddPV Overload1 | ARCCore | ClassMember | Adds a property value (as a -PValue-) for this objectThrows -KeyAlreadyExistsException- when relevant. |
ARCQuery.MemberEntityKey.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
ARCCore.IP.Keys | ARCCore | ClassMember | Returns all the keys for this instance. |
ARCCore.IP.AddP | ARCCore | ClassMember | Adds a property for this object. |
ARCQuery.OrdinaryKeyPlusFunctionOrQuantile | ARCQuery | Class | A -CompoundKey- containing some function keys or quantile key operating on an existing property of the entity in question. |
ARCCore.IP.Values | ARCCore | ClassMember | Returns all the values (all the properties) for this instance. |
ARCCore.IP.AddOrUpdateP | ARCCore | ClassMember | Duplicates functionality of SetP. |
ARCQuery.OrdinaryKeyPlusFunctionOrQuantile.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
ARCCore.IP.Logger | ARCCore | ClassMember | Describes a logger. |
ARCCore.IP.GetOrAddPV | ARCCore | ClassMember | Gets value. If not set then value will be added |
ARCQuery.OrdinaryKeyPlusFunctionOrQuantile.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
ARCCore.IP.AllIPDerivedTypes | ARCCore | ClassMember | All relevant -IP--derived types for the whole application. |
ARCCore.IP.GetPV | ARCCore | ClassMember | Gets a single property's value for this object. Returns default value if not successful. |
ARCQuery.OrdinaryKeyPlusFunctionOrQuantile.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
ARCCore.IP.AllIPDerivedTypesWithPKEnum | ARCCore | ClassMember | All relevant -IP--derived types for the whole application for which the also is defined a -PropertyKeyEnum-. |
ARCCore.IP.TryGetPV | ARCCore | ClassMember | Gets a single property's value for the given property key. |
ARCQuery.OrdinaryKeyPlusFunctionOrQuantile..ctor | ARCQuery | ClassMember | Note that calling only this constructor without afterwards setting -FunctionKeys- and / or -QuantileKey- would be meaningless. |
ARCCore.IP.AllIPDerivedTypesWithPKEnumApplicationSpecific | ARCCore | ClassMember | All relevant -IP--derived types for the -ApplicationSpecificCode- part of the application for which also is defined a -PropertyKeyEnum-. |
ARCCore.IP.AllIPDerivedEntityCollectionClassesDict | ARCCore | ClassMember | All -IP--derived types for which is found a corresponding class with name like '{EntityType}Collection' |
ARCQuery.OrdinaryKeyPlusFunctionOrQuantile.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
ARCCore.ICreated | ARCCore | Class | A dummy interface signifying that implementing class has the ability to store (in-memory) metadata -Created- |
ARCCore.IP.AllIPDerivedTypesInludingGenericAndAbstract | ARCCore | ClassMember | All relevant -IP--derived types (except the interface -IP- itself) known to the application. |
ARCQuery.OrdinaryKeyPlusFunctionOrQuantile.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
ARCCore.PCollection | ARCCore | Class | A class useful for storing a collection of entities (a table in RDBMS-terms) because it implements -Indexing-. |
ARCCore.IP.AllIPDerivedTypesDict | ARCCore | ClassMember | Provides lookup of a type in -AllIPDerivedTypes- given its string representation. |
ARCQuery.Extensions | ARCQuery | Class | |
ARCCore.PCollection.TrySetPP | ARCCore | ClassMember | Replaces default interface method -TrySetPP-. |
ARCCore.IP.AllIPDerivedTypesDictIKType | ARCCore | ClassMember | Same as -AllIPDerivedTypesDict- except that value is -IKType-, not string. |
ARCQuery.Extensions.TryGetP | ARCQuery | ClassMember | Same functionality as -TryGetP- but understands the concept of -CompoundKey-. |
ARCCore.PCollection.GetKeysEqualToValue | ARCCore | ClassMember | Returns properties which themselves again have key and value equal to the given key and value. |
ARCCore.P | ARCCore | Class | 'Dummy'-class, not necessarily in use. See -PP- for more information. Created because of the concept of CorrespondingClass which is strictly enforced |
ARCQuery.FunctionKeyAggregate | ARCQuery | Class | Operates over a collection of properties. |
ARCCore.PCollection.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
ARCCore.P.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
ARCQuery.FunctionKeyAggregate.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
ARCCore.PCollection.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
ARCCore.P.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
ARCQuery.FunctionKeyAggregateAvg | ARCQuery | Class | Calculates the average of the given properties. |
ARCCore.PCollection.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
ARCCore.P.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
ARCQuery.FunctionKeyAggregateAvg.SyntaxHelp | ARCQuery | ClassMember | 'Avg()' |
ARCCore.IGetKeysEqualToValue | ARCCore | Class | Interface stating that implementing class does not use the default implementation of -GetKeysEqualToValue- (which does not use -Indexing-) but has replaced it with a more efficient implementation assumed to utilize -Indexing-. |
ARCCore.PConcurrent | ARCCore | Class | A (somewhat) thread-safe alternative to -PRich- which also supports -ExposingApplicationState- (through -Logger-). |
ARCQuery.FunctionKeyDouble.SyntaxHelp | ARCQuery | ClassMember | 'Double()' |
ARCCore.PExact<TEnumType>.Storage | ARCCore | ClassMember | Uses int-value of -__enum- minus 1 as index. |
ARCCore.PConcurrent.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
ARCQuery.FunctionKeyFirstLine | ARCQuery | Class | Extracts first line from string of text. |
ARCCore.PII | ARCCore | Class | PII = property for storing individual items. |
ARCCore.PExact<TEnumType> | ARCCore | Class | Very -MemoryConsumption- efficient alternative to -PRich-. |
ARCQuery.FunctionKeyFirstLine.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
ARCCore.PII.TryGetV | ARCCore | ClassMember | Since value is stored in keys, we need to override this method. |
ARCCore.PExact<TEnumType>.SetPVDirect | ARCCore | ClassMember | High performance alternative to -TrySetP-, accessing -Storage- more direct. |
ARCQuery.FunctionKeyFirstLine.SyntaxHelp | ARCQuery | ClassMember | 'FirstLine()' |
ARCCore.PII.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
ARCCore.PExact<TEnumType>.GetPVDirect | ARCCore | ClassMember | High performance alternative to -TryGetP-, accessing -Storage- more direct. |
ARCQuery.FunctionKeyVeryShort | ARCQuery | Class | Returns the -ToStringVeryShort- representation of the given type. |
ARCCore.PII.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
ARCCore.PExact<TEnumType>.TryGetPVDirect | ARCCore | ClassMember | High performance alternative to -TryGetP-, accessing -Storage- more direct. |
ARCQuery.FunctionKeyVeryShort.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
ARCCore.IPII | ARCCore | Class | Future expansion, using different classes for storing, not only -PII-. |
ARCCore.PExact<TEnumType>.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
ARCQuery.FunctionKeyVeryShort.SyntaxHelp | ARCQuery | ClassMember | 'VeryShort()' |
ARCCore.IIKII | ARCCore | Class | Related to -PII-, property for storing individual items |
ARCCore.PExact<TEnumType>..ctor | ARCCore | ClassMember | Set capacity to the number of members in the -PropertyKeyEnum- for this class (minus the __invalid-value) |
ARCQuery.FunctionKeyHourMinute | ARCQuery | Class | Formats a timespan with only the hour and minute part. Uses format hh:mm. |
ARCCore.IIKII.PackParseResultForStorageInIKII | ARCCore | ClassMember | This method corresponds to -PackParseResultForStorageInEntityObject-. |
ARCCore.PValue<T>.TryGetV | ARCCore | ClassMember | Supports duck typing. |
ARCQuery.FunctionKeyHourMinute.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
ARCCore.IIKII.PackObjectForStorageInIKII | ARCCore | ClassMember | This method corresponds to -PackObjectForStorageInEntityObject-. |
ARCCore.PValue<T>.ConvertObjectToString | ARCCore | ClassMember | Converts object to string. |
ARCQuery.FunctionKeyHourMinute.SyntaxHelp | ARCQuery | ClassMember | 'HourMinute()' |
ARCCore.PReadOnly | ARCCore | Class | Experimental (from Feb 2022) class suitable for classes that do not need to be deserialized, or to accept write requests through -PropertyAccess-. |
ARCCore.PValue<T>.ToString | ARCCore | ClassMember | Do no cache this value, because memory consumption would then increase significantly in your applicationj |
ARCQuery.FunctionKeyInt | ARCQuery | Class | Rounds a double value to the nearest integer (uses .NET data type Int64 (long)). |
ARCCore.PRich | ARCCore | Class | Fully flexible storage. Can store anything. Typical inherited for entity representations like 'Customer' or 'Order'. |
ARCCore.PValue<T>.DeepCopy | ARCCore | ClassMember | Note that if the generic type (T) is not immutable, then what we return will not be a truly deep copy. |
ARCQuery.FunctionKeyInt.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
ARCCore.PRich.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
ARCCore.PValue<T>..ctor | ARCCore | ClassMember | Note how this class does not have a parameter-less constructor (unlike all other -IP--derived classes in AgoRapide) |
ARCQuery.FunctionKeyInt.SyntaxHelp | ARCQuery | ClassMember | 'Int()' |
ARCCore.PRich.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
ARCCore.PValueEmpty | ARCCore | Class | Represents the 'no value'. |
ARCQuery.FunctionKeyLength | ARCQuery | Class | Returns length of (string) value of field, like 4 for 'John'. |
ARCCore.PRich.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
ARCCore.PValueEmpty.TrySetP | ARCCore | ClassMember | NOTE: -TryStore- is explicit aware that -PValue- and -PValueEmpty- |
ARCQuery.FunctionKeyLength.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
ARCCore.PValue<T> | ARCCore | Class | Single value storage. |
ARCCore.PValueEmpty.ToPropertyStream | ARCCore | ClassMember | Typicall return value could be something like |
ARCQuery.FunctionKeyLength.SyntaxHelp | ARCQuery | ClassMember | 'Length()' |
ARCCore.PValue<T>.TrySetP | ARCCore | ClassMember | NOTE: -TryStore- is explicit aware that -PValue- and -PValueEmpty- |
ARCCore.ActualConnection | ARCCore | Class | The actual connection, its internal state, queue for sending and so on. |
ARCQuery.FunctionKeyMonth | ARCQuery | Class | Extracts month component from field like '2020-12-09' becoming '12'. |
ARCCore.ActualConnection.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
ARCCore.ActualConnection.SetMyUpdatePositionGenerator | ARCCore | ClassMember | Set by -StreamProcessor-. |
ARCQuery.FunctionKeyMonth.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
ARCCore.ActualConnection..ctor | ARCCore | ClassMember | Note parameter-less constructor as desired for all classes inheriting -IP-. |
ARCCore.ActualConnection.SetSinglePropertyStreamReceiver | ARCCore | ClassMember | Set by -StreamProcessor-. |
ARCQuery.FunctionKeyMonth.SyntaxHelp | ARCQuery | ClassMember | 'Month()' |
ARCCore.MonkeyWrench | ARCCore | Class | Describes level of 'spanner-throwing' this connection shall contibute with |
ARCCore.ActualConnection.SetUpToDatePositionGenerator | ARCCore | ClassMember | Set by -StreamProcessor-. Not used by -Client-. |
ARCQuery.FunctionKeyQuarter | ARCQuery | Class | Extracts quarter component from datetime field like '2020-12-09' becoming 'Q4'. |
ARCCore.ClientUpdatePosition | ARCCore | Class | Describes from WHERE (from WHEN) in the historic -PropertyStream- new data is to be returned. |
ARCCore.ActualConnection.InitializeOutgoingConnection | ARCCore | ClassMember | Relevant for -Outgoing-. |
ARCQuery.FunctionKeyQuarter.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
ARCCore.ClientUpdatePosition.Filename | ARCCore | ClassMember | Filename like '2020-04-03 08:42:22_R001' |
ARCCore.ActualConnection.Communicate | ARCCore | ClassMember | Common for both -Incoming- and -Outgoing-. |
ARCQuery.FunctionKeyQuarter.SyntaxHelp | ARCQuery | ClassMember | 'Quarter()' |
ARCCore.ClientUpdatePosition.Index | ARCCore | ClassMember | Index (zero-based) into file. Value of -1 means blank update status / no data received at all (or no data received for this specific filename) |
ARCCore.ActualConnection.LogAndSendErrorConditionData | ARCCore | ClassMember | Called when a serious error condition has been discovered and connection should be terminated. |
ARCQuery.FunctionKeyShort | ARCQuery | Class | 'Smart' way of showing time. Removes unnecessary information. |
ARCCore.ClientUpdatePosition.ClientDatastoreIsEmpty | ARCCore | ClassMember | Used by the subscribing client to signify that it has no data stored locally, and it therefore needs an update from the beginning of the -PropertyStream-, that is, 'from the beginning of time'. |
ARCCore.ActualConnection.Send | ARCCore | ClassMember | Sends all messages in queue. |
ARCQuery.FunctionKeyShort.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
ARCCore.ClientUpdatePosition.OnlyNewDataIsRequested | ARCCore | ClassMember | Used by the subscribing client to signify that it does not care about historical data, the server may start with sending only new data. |
ARCCore.ClientUpdatePosition.IsGoBack | ARCCore | ClassMember | Has to be translated by -StreamProcessor- into a concrete filename / index. |
ARCQuery.FunctionKeyShort.SyntaxHelp | ARCQuery | ClassMember | 'Short()' |
ARCCore.PropertyStreamLine.TryParseDirectToIP | ARCCore | ClassMember | Parses a series of -PropertyStreamLine- directly to the given type of -IP-. |
ARCCore.ClientUpdatePosition.IsAtEndOfStream | ARCCore | ClassMember | Necessary in order to implement -AdHocQuery-. |
ARCQuery.FunctionKeyTMB | ARCQuery | Class | TMB = Thousands, Millions, Billions. |
ARCCore.PropertyStreamLine.TryParseDirectToProperty | ARCCore | ClassMember | Parses direct to a given property value. |
ARCCore.ClientUpdatePosition.ClientDatastoreIsEmptyInstance | ARCCore | ClassMember | See also -ClientDatastoreIsEmpty. |
ARCQuery.FunctionKeyTMB.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
ARCCore.PropertyStreamLine.ParseAndStore | ARCCore | ClassMember | Note that throws exception if -TryParseAndStore- fails. |
ARCCore.ClientUpdatePosition.OnlyNewDataIsRequestedInstance | ARCCore | ClassMember | See also -OnlyNewDataIsRequested. |
ARCQuery.FunctionKeyTMB.SyntaxHelp | ARCQuery | ClassMember | 'TMB()' |
ARCCore.PropertyStreamLine.ParseAndStoreFailSafe | ARCCore | ClassMember | If either parsing or storing fails then this method will call -StoreFailure- in order to keep some track of why parsing or storing failed. |
ARCCore.ConnectionInstruction | ARCCore | Class | The instruction about what connections to make (host, portnr, data transfer direction and so on). |
ARCQuery.FunctionKeyTotalHours | ARCQuery | Class | Converts a timespan to total hours (as an integer). |
ARCCore.PropertyStreamLine.StoreFailSafe | ARCCore | ClassMember | Stores if possible and fails silently. |
ARCCore.ConnectionInstruction.Initialize | ARCCore | ClassMember | Initializes to sane values. |
ARCQuery.FunctionKeyTotalHours.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
ARCCore.PropertyStreamLine.StoreFailure | ARCCore | ClassMember | Stores a 'ParseOrStoreFailure'-object. |
ARCCore.ConnectionInstruction.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
ARCQuery.FunctionKeyTotalHours.SyntaxHelp | ARCQuery | ClassMember | 'TotalHours()' |
ARCCore.PropertyStreamLine.TryStore | ARCCore | ClassMember | Stores the given -PropertyStreamLineParsed- in the given storage object. |
ARCCore.ConnectionInstruction.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
ARCQuery.FunctionKeyTotalMinutes | ARCQuery | Class | Converts a timespan to total minutes (as an integer). |
ARCCore.PropertyStreamLine.AllowedKeyChars | ARCCore | ClassMember | Allowed characters in the Key-part of a -PropertyStreamLine-. |
ARCCore.ConnectionInstruction.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
ARCQuery.FunctionKeyTotalMinutes.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
ARCCore.PropertyStreamLine.AllowedValueChars | ARCCore | ClassMember | Allowed characters in the Value-part of a -PropertyStreamLine-. |
ARCCore.Sharding | ARCCore | Class | Enables load-balancing by describing what data should be sent over a given connection. |
ARCQuery.FunctionKeyTotalMinutes.SyntaxHelp | ARCQuery | ClassMember | 'TotalMinutes()' |
ARCCore.PropertyStreamLineParsed | ARCCore | Class | Parses the keys part of a line from -PropertyStream-, like 'Customer/42/FirstName = John. |
ARCCore.PropertyStreamLine | ARCCore | Class | Has two main functions: |
ARCQuery.FunctionKeyType | ARCQuery | Class | Returns the type of a property. |
ARCCore.PropertyStreamLineParsed.ToString | ARCCore | ClassMember | Note relatively complex operation of 'restoring' original property stream line. |
ARCCore.PropertyStreamLine.EncodeKeys | ARCCore | ClassMember | Encodes the key part of a -PropertyStreamLine-. |
ARCQuery.FunctionKeyType.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
ARCCore.PropertyStreamLineParsed.TryParse | ARCCore | ClassMember | Generate list of <(IK key, Type valueType)> together with value from value part. |
ARCCore.PropertyStreamLine.EncodeValues | ARCCore | ClassMember | Typically used when turning -WholeCollection- into a value part of a -PropertyStreamLine-. |
ARCQuery.FunctionKeyType.SyntaxHelp | ARCQuery | ClassMember | 'Type()' |
ARCCore.PropertyStreamLineParsed.IsComment | ARCCore | ClassMember | Signifies that property stream line given for parsing started with '//' (two forward slashes). |
ARCCore.PropertyStreamLine.EncodeKeyPart | ARCCore | ClassMember | Converts a single key part of a -PropertyStreamLine- to a format suitable for sending over a -PropertyStream-. |
ARCQuery.FunctionKeyWeek | ARCQuery | Class | Extract week-number from field according to ISO 8601. |
ARCCore.PropertyStreamLineParsed.Keys | ARCCore | ClassMember | The keys part of the -PropertyStreamLine-, that is, everything before ' = '. |
ARCCore.PropertyStreamLine.EncodeValuePart | ARCCore | ClassMember | Converts a single value part of a -PropertyStreamLine- to a format suitable for sending over a -PropertyStream-. |
ARCQuery.FunctionKeyWeek.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
ARCCore.PropertyStreamLineParsed.Value | ARCCore | ClassMember | The original (non-parsed, non-validated)) value part of the -PropertyStreamLine-, that is, everything after ' = '. |
ARCCore.PropertyStreamLine.Decode | ARCCore | ClassMember | Decodes string as encoded by -EncodeKeyPart- or -EncodeValuePart-. |
ARCQuery.FunctionKeyWeek.SyntaxHelp | ARCQuery | ClassMember | 'Week()' |
ARCCore.StreamProcessor | ARCCore | Class | Implements the storage mechanism for AgoRapide. |
ARCCore.StreamProcessor.CreateBareBonesInstance | ARCCore | ClassMember | Creates a bare-bones -StreamProcessor- instance. |
ARCQuery.NewKeyCountPRec.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
ARCCore.StorageFile.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
ARCCore.StreamProcessor.Initialize | ARCCore | ClassMember | Initializes this instance of -StreamProcessor- |
ARCQuery.NewKeyCountPRec.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
ARCCore.StorageFile.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
ARCCore.StreamProcessor.AddOrRemoveOutgoingConnections | ARCCore | ClassMember | Not relevant for -CoreDB-. |
ARCQuery.NewKeyCountPRec.SyntaxHelp | ARCQuery | ClassMember | 'CountPRec()' |
ARCCore.Subscription | ARCCore | Class | A stream -Subscription- is the concept of how nodes (see -ARNodeType-) subscribe to the -PropertyStream- (either the whole stream or just part of it) in a distributed manner. |
ARCCore.StreamProcessor.StartTCPIPCommunication | ARCCore | ClassMember | Starts communicating over TCP/IP. |
ARCQuery.NewKeyCountPRec.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
ARCCore.Subscription.FromTime | ARCCore | ClassMember | TODO: Implement concept of specifying starting-point in TIME (often for an -AdHocQuery-?). |
ARCCore.StreamProcessor.ReceiveAndDistribute | ARCCore | ClassMember | Process all messages in receive queue. |
ARCQuery.NewKeyCountPRec.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
ARCCore.Subscription.ToTime | ARCCore | ClassMember | TODO: Implement concept of specifying ending-point in TIME (often for an -AdHocQuery-?). |
ARCCore.StreamProcessor.AddTimestampAsRequired | ARCCore | ClassMember | Adds -Timestamp- to the property stream (to -_queueReceive-) as specified by -TimestampResolution-. |
ARCQuery.NewKeyGetType | ARCQuery | Class | Returns the internal C# object type of the given object. |
ARCCore.Subscription.IsMatch Overload1 | ARCCore | ClassMember | Evaluates a query consisting of multiple instances of -Subscription- against a single property stream line. |
ARCCore.StreamProcessor.ReadStorageFile | ARCCore | ClassMember | Reads one storage file from disk |
ARCQuery.NewKeyGetType.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
ARCCore.Subscription.IsMatch Overload2 | ARCCore | ClassMember | Evaluates this instance of -Subscription- against a single property stream line (which has been split up into its constituent elements). |
ARCCore.StreamProcessor.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
ARCQuery.NewKeyGetType.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
ARCCore.Subscription.SyntaxHelp | ARCCore | ClassMember | '+*' Subscribe to everything in database. |
ARCCore.StreamProcessor.OutsideLocalReceiver | ARCCore | ClassMember | The outside (in the sense outside of this class) local mechanism which receives all -PropertyStreamLine- registered by this class. |
ARCQuery.NewKeyGetType.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
ARCCore.Subscription.IsAdd | ARCCore | ClassMember | Corresponds to whether value starts with a plus sign, '+' or not. |
ARCCore.PropertyStreamLineWithOrigin | ARCCore | Class | The rationale for this class is that -ReceiveAndDistribute- needs to distingush origin of data when routing it (in general, in order to avoid sending it back to its source). |
ARCQuery.NewKeyGetType.SyntaxHelp | ARCQuery | ClassMember | 'GetType()' |
ARCCore.Subscription.IsRemove | ARCCore | ClassMember | Corresponds to whether value starts with a minus sign, '+' or not. |
ARCCore.PropertyStreamLineWithOrigin.HasLocalOrigin | ARCCore | ClassMember | Locally generated data is not to be sent to -OutsideLocalReceiver-). We instead leave it to the 'outside' to decide if |
ARCQuery.NewKeyGetType.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
ARCCore.UtilCore | ARCCore | Class | Utility methods for -ARCCore-. |
ARCCore.PropertyStreamLineWithOrigin.SendToLocalReceiver | ARCCore | ClassMember | Means 'send to local receiver regardless of origin'. |
ARCQuery.NewKeyGetType.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
ARCCore.UtilCore.AssertCurrentlyStartingUp | ARCCore | ClassMember | Normally called from non-thread safe methods that should be run single-threaded at application startup only. |
ARCCore.PropertyStreamLineWithOrigin.DoNotAddTimestamp | ARCCore | ClassMember | Normally -StreamProcessor- inserts the required -Timestamp-s in the AgoRapide storage. |
ARCQuery.NewKeyToPropertyStream | ARCQuery | Class | Returns the -PropertyStream- representation of the given object. |
ARCCore.UtilCore.DoubleTryParse | ARCCore | ClassMember | Note that treats ',' (comma) as decimal point (not as thousands separator). |
ARCCore.PropertyStreamLineWithOrigin.ReceivedFromOutgoing | ARCCore | ClassMember | Data received from an outgoing connection, that is, data received based on 'this' application's subscription request (as subscribing client). |
ARCQuery.NewKeyToPropertyStream.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
ARCCore.UtilCore.EnumTryParse | ARCCore | ClassMember | Same as the inbuilt .NET method -TryParse- but with some additional checks. |
ARCCore.StorageFile | ARCCore | Class | Implemented only in order to store some ideas about -Hash-. |
ARCQuery.NewKeyToPropertyStream.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
ARCCore.UtilCore.TryGetTypeFromStringNoCache | ARCCore | ClassMember | See -TryGetTypeFromStringFromCache- for documentation. |
ARCCore.StorageFile.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
ARCQuery.NewKeyToPropertyStream.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
ARCCore.UtilCore.TryGetTypeFromStringFromCache | ARCCore | ClassMember | Corresponding method for creating string-representation of type is -ToStringDB-. |
ARCCore.UtilCore.GetExceptionChainAsString | ARCCore | ClassMember | Follows the chain of InnerException and returns types as comma-separated string |
ARCQuery.NewKeyToPropertyStream.SyntaxHelp | ARCQuery | ClassMember | 'ToPropertyStream()' |
ARCCore.InvalidTypeException | ARCCore | Class | |
ARCCore.UtilCore.GetExeptionDetails | ARCCore | ClassMember | Gives as much information about exception as possible. |
ARCQuery.NewKeyToPropertyStream.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
ARCCore.InvalidTypeException.AssertAssignable | ARCCore | ClassMember | Asserts that expectedType.IsAssignableFrom(foundType) |
ARCCore.UtilCore.DateTimeTryParse | ARCCore | ClassMember | Accepts on of the formats specified in -ValidDateTimeFormats-. |
ARCQuery.NewKeyToPropertyStream.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
ARCCore.InvalidTypeException.AssertEquals | ARCCore | ClassMember | Asserts that expectedType.Equals(foundType) |
ARCCore.UtilCore.TimeSpanTryParse | ARCCore | ClassMember | Accepts on of the formats specified in -ValidDateTimeFormats-. |
ARCQuery.QuantileKey | ARCQuery | Class | Can separate entities into quantiles, like Quartiles, Quintiles or Sextiles. |
ARCCore.TValue | ARCCore | Class | Placeholder for any class type suitable as generic type parameter -PValue-. |
ARCCore.UtilCore.UseLocalTimeInsteadOfUTC | ARCCore | ClassMember | By default AgoRapide operates only with UTC time. |
ARCQuery.QuantileKey.TryGetP | ARCQuery | ClassMember | Returns an integer with the number of the quantile group for the value returned by the given -CompoundKey-). |
ARCCore.TIP | ARCCore | Class | Placeholder for any class type suitable as generic type parameter restricted to -IP. |
ARCCore.UtilCore.DateTimeNow | ARCCore | ClassMember | Returns DateTime.UtcNow unless -UseLocalTimeInsteadOfUTC- has been set to TRUE in which case DateTime.Now is returned. |
ARCQuery.QuantileKey.TryParse | ARCQuery | ClassMember | Note that any value (positive integer greated than 2) is accepted, not necessarily only string-representations of enums within -Quantile-. |
ARCCore.TIP.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
ARCCore.UtilCore.CurrentlyStartingUp | ARCCore | ClassMember | Called once at application startup after all Attribute instances in the C# code has been processed. |
ARCQuery.Query | ARCQuery | Class | Keeps track of progress of query, and the interim result. |
ARCCore.TIP.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
ARCCore.UtilCore.Assemblies | ARCCore | ClassMember | All relevant assemblies for application. |
ARCQuery.Query.ShouldTerminate | ARCQuery | ClassMember | Attempts to explain problem, in -TerminateReason- and by logging. |
ARCCore.TIP.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
ARCCore.UtilCore.Culture | ARCCore | ClassMember | The general culture used for parsing. |
ARCQuery.Query.ExecuteOne | ARCQuery | ClassMember | NOTE: Note how avoids deferred execution in order to always correctly time execution of each query element separately. |
ARCCore.BaseAttribute+IncorrectAttributeTypeUsedException | ARCCore | Class | Helps to clean up any confusion about which -BaseAttribute- to use in a given concept. |
ARCCore.UtilCore.Culture_en_US | ARCCore | ClassMember | Used by -DoubleTryParse-. |
ARCQuery.Query.AllLogEntriesForThisQuery | ARCQuery | ClassMember | Temporary storage of log information. |
ARCCore.PK+BasePKAttributeNotFoundException<T> | ARCCore | Class | Explains how to implement a given -BasePKAttribute- for an enum |
ARCCore.UtilCore.DefaultAgoRapideEncoding | ARCCore | ClassMember | The standard encoding used for text (UTF8). |
ARCQuery.Query.Progress | ARCQuery | ClassMember | Use of member class in order for -Query- not to inherit -IP-. |
ARCCore.PK+PKBoolPair | ARCCore | Class | Used to signify that a given -PK- returned from value factory inside -FromEnum- has not been initialized (has not yet been populated with -PKTypeAttribute- collection). |
ARCCore.UtilCore.ValidDateTimeFormats | ARCCore | ClassMember | 'yyyy-MM-dd HH:mm:ss.fff', 'yyyy-MM-dd HH:mm:ss', 'yyyy-MM-dd HH:mm', 'yyyy-MM-dd' |
ARCQuery.QueryExpression | ARCQuery | Class | Represents part of a query (or actually a transformation) against a given collection and the data storage from which it was taken. |
ARCCore.PK+PKBoolPair.TrulyInitialized | ARCCore | ClassMember | Not used currently (May 2020). Useful for debugging purposes |
ARCCore.UtilCore.ValidTimeSpanFormats | ARCCore | ClassMember | 'hh\:mm', 'hh\:mm\:ss', 'd\.hh\:mm\:ss', 'hh\:mm\:ss\.fff' // Milliseconds,'d\.hh\:mm\:ss\.fff' |
ARCQuery.QueryExpression.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
ARCCore.StreamProcessor+StorageFile | ARCCore | Class | |
ARCCore.REx | ARCCore | Class | REx = 'TooDeepRecursiveDepthException' |
ARCQuery.QueryExpression.AddParser | ARCQuery | ClassMember | Adds a -ApplicationSpecificCode- parser. |
ARCCore.StreamProcessor+StorageFile.Filepath | ARCCore | ClassMember | Complete path to file |
ARCCore.REx.Inc | ARCCore | ClassMember | Increases recursive count. |
ARCQuery.QueryExpression.TryParse | ARCQuery | ClassMember | Find parsers from -Parsers- based on first word in query. |
ARCCore.StreamProcessor+StorageFile.Filename | ARCCore | ClassMember | Filename: Main file name, like 2020-04-03 08:42 |
ARCCore.REx.Dec | ARCCore | ClassMember | This method should be called from inside a 'finally' block, in order to secure its execution, if not then your static recursion depth counter could slowly increase over time due to exceptions ocurring after call to -Inc- but before call to -Dec-. |
ARCQuery.QueryExpression.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
ARCCore.StreamProcessor+StorageFile.Length | ARCCore | ClassMember | Wrongly placed. Belongs to each individual revision file. |
ARCCore.StreamProcessor+StorageFile.Properties | ARCCore | ClassMember | Key = revision number of file (due to compression / -DataRetention-), like R00001, R00002 and so on. |
ARCQuery.QueryExpressionHint.SyntaxHelp | ARCQuery | ClassMember | HINT {ON|OFF} |
ARCCore.ClassMemberAttributeP.MethodName | ARCCore | EnumMember | The actual MemberInfo.Name. |
ARCCore.BaseAttributeP | ARCCore | Enum | Describes class -BaseAttribute-. |
ARCQuery.QueryExpressionLimit | ARCQuery | Class | Limits the final HTML presentation of results (limits the number of elements being presented). |
ARCCore.ClassMemberAttributeP.MethodSignature | ARCCore | EnumMember | The actual MemberInfo.ToString. |
ARCCore.BaseAttributeP.Description | ARCCore | EnumMember | The description for the attribute, like this description |
ARCQuery.QueryExpressionLimit.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
ARCCore.EnumAttributeP | ARCCore | Enum | Describes class -EnumAttribute-. |
ARCCore.BaseAttributeP.LongDescription | ARCCore | EnumMember | The long (detailed) description for the attribute. |
ARCQuery.QueryExpressionLimit.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
ARCCore.EnumAttributeP.AssemblyName | ARCCore | EnumMember | The assembly in which this class resides. |
ARCCore.ClassAttributeP | ARCCore | Enum | Describes class -ClassAttribute-. |
ARCQuery.QueryExpressionLimit.SyntaxHelp | ARCQuery | ClassMember | Syntax: LIMIT {limit} like 'LIMIT 42' |
ARCCore.EnumAttributeP.EnumNamespace | ARCCore | EnumMember | The namespace for -EnumType-. |
ARCCore.ClassAttributeP.AssemblyName | ARCCore | EnumMember | The assembly in which this class resides. |
ARCQuery.QueryExpressionLog | ARCQuery | Class | A debugging tool used to extract detailed log information about the execution of the query. |
ARCCore.EnumAttributeP.EnumType | ARCCore | EnumMember | The type of the enum (like type of 'CustomerP' in CustomerP.FirstName) that we are an attribute for |
ARCCore.ClassAttributeP.ClassNamespace | ARCCore | EnumMember | The namespace for -ClassType-. |
ARCQuery.QueryExpressionLog.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
ARCCore.EnumAttributeP.AREnumType | ARCCore | EnumMember | Note that will default to -__invalid- if not explicit set. |
ARCCore.ClassAttributeP.ClassType | ARCCore | EnumMember | The actual type that we are a -ClassAttribute- for |
ARCQuery.QueryExpressionLog.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
ARCCore.EnumAttributeP.CorrespondingClass | ARCCore | EnumMember | Only relevant when -PropertyKeyEnum-. |
ARCCore.ClassAttributeP.BaseTypes | ARCCore | EnumMember | The inheritance hierarchy for this class, starting with base type (excluding 'object').r Not set if class does not inherit any class except 'object' |
ARCQuery.QueryExpressionLog.SyntaxHelp | ARCQuery | ClassMember | 'Log'. |
ARCCore.EnumMemberAttributeP | ARCCore | Enum | Describes class -EnumMemberAttribute-. |
ARCCore.ClassAttributeP.SubTypes | ARCCore | EnumMember | Direct and indirect sub types of this class. |
ARCQuery.QueryExpressionOrderBy | ARCQuery | Class | Orders collection. |
ARCCore.EnumMemberAttributeP.EnumType | ARCCore | EnumMember | The type of the enum (like type of 'CustomerP' in CustomerP.FirstName) that we are an attribute for |
ARCCore.ClassAttributeP.Interfaces | ARCCore | EnumMember | All interfaces that this class and its base classes implement |
ARCQuery.QueryExpressionOrderBy.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
ARCCore.EnumMemberAttributeP.EnumMember | ARCCore | EnumMember | The actual enum member / enum value (like 'Firstname' in CustomerP.FirstName) that we are an attribute for |
ARCCore.ClassAttributeP.InterfacesDirectlyImplemented | ARCCore | EnumMember | All interfaces that this class directly implements. |
ARCQuery.QueryExpressionOrderBy.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
ARCCore.ARComponents | ARCCore | Enum | ARComponents = AgoRapide Components. Contains short descriptions of the different 'official' AgoRapide components. |
ARCCore.ClassAttributeP.CorrespondingEnumType | ARCCore | EnumMember | Only relevant when implements -IP-. |
ARCQuery.QueryExpressionOrderBy.SyntaxHelp | ARCQuery | ClassMember | ORDER BY {key} [DESC] / [ASC] |
ARCCore.ARComponents.ARCCore | ARCCore | EnumMember | A necessary library (.DLL in Windows terms) that every -ARNodeType- should link to. |
ARCCore.ClassAttributeP.BoilerplateCodePropertiesAndStorage | ARCCore | EnumMember | Only relevant when implements -IP- and when a -CorrespondingEnumType- is found. |
ARCQuery.QueryExpressionPivot | ARCQuery | Class | Creates a table by querying over two keys like |
ARCCore.ARComponents.ARADB | ARCCore | EnumMember | An application constituting the full functionality of a -CoreDB- (linking to -ARCCore-). |
ARCCore.ClassMemberAttributeP | ARCCore | Enum | Describes class -ClassMemberAttribute-. |
ARCQuery.QueryExpressionPivot.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
ARCCore.ARComponents.ARAClient | ARCCore | EnumMember | A template application for a -Client- (linking to -ARCCore-). |
ARCCore.ClassMemberAttributeP.DeclaringType | ARCCore | EnumMember | The actual MemberInfo.DeclaringType. |
ARCQuery.QueryExpressionPivot.GetCrossSummationChecker | ARCQuery | ClassMember | Returns a cross sum checker for int, long, double, Timespan. |
ARCCore.ARComponents.ARCDoc | ARCCore | EnumMember | A library supporting documentation and demonstrating usage of AgoRapide. |
ARCCore.ARComponents.ARCQuery | ARCCore | EnumMember | ARCQuery provides a query language that mimicks SQL but is usable through HTTP as GET URLs. |
ARCQuery.QueryExpressionPivot.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
ARCCore.ARConcepts.AvoidingRepetition | ARCCore | EnumMember | Avoiding repetition, the overarching philosophy that inspired the rest of AgoRapide. |
ARCCore.ARComponents.ARCEvent | ARCCore | EnumMember | ARCEvent contains an -EventSourcing- engine offering a unique -PropertyStream2D- concept where processes (of some business domain) can be expressed in very compact manner through the concept of -IRegHandler-. |
ARCQuery.QueryExpressionPivot.SyntaxHelp | ARCQuery | ClassMember | 1) 'PIVOT {rowKey} BY {columnKey}' like "PIVOT Colour BY Production.Year" |
ARCCore.ARConcepts.AgoRapideHistory | ARCCore | EnumMember | AgoRapide has roots back to 2011 when Bjørn Erling Fløtten invented panSL (SL = Schema language). |
ARCCore.ARComponents.ARCSync | ARCCore | EnumMember | (Not implemented as of March 2020) |
ARCQuery.QueryExpressionPivot.AggregationType | ARCQuery | ClassMember | Most common value is -Count-, in which case -AggregationKey- may be correspondingly set to null. |
ARCCore.ARConcepts.AdHocQuery | ARCCore | EnumMember | The concept of a -Client- doing an ad-hoc query against (normally) a -ArmDB-. |
ARCCore.ARComponents.ARCSec | ARCCore | EnumMember | (Not implemented as of March 2020) |
ARCQuery.QueryExpressionPivot.AggregationKey | ARCQuery | ClassMember | This is often null (with -AggregationType- correspondingly set to Count-). |
ARCCore.ARConcepts.StandardAgoRapideCode | ARCCore | EnumMember | Code originating from the main official AgoRapide distribution (which therefore does not include any end-application specific code) |
ARCCore.ARComponents.ARCAPI | ARCCore | EnumMember | A library providing an API on top of the -PropertyStream-. |
ARCQuery.QueryExpressionRel | ARCQuery | Class | Enables 'jumping' or 'travelling' from a collection of one entity type to another (related) entity type. |
ARCCore.ARConcepts.ApplicationSpecificCode | ARCCore | EnumMember | Code specific for an end-application. |
ARCCore.ARComponents.ARAAPI | ARCCore | EnumMember | The corresponding template application for -ARCAPI- demonstrating its usage, providing an HTTP / HTTPS interface with the help of Microsoft.AspNetCore.Mvc. |
ARCQuery.QueryExpressionRel.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
ARCCore.ARConcepts.MemoryConsumption | ARCCore | EnumMember | A naïve implementation of key-value storages like AgoRapide may lead to excessive memory (RAM) consumption. |
ARCCore.ARConcepts | ARCCore | Enum | The overarching concepts upon which AgoRapide is built. |
ARCQuery.QueryExpressionRel.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
ARCCore.ARConcepts.Indexing | ARCCore | EnumMember | In-memory indexing of data is done 'behind-the-scenes' by some classes implementing -IP-. |
ARCCore.ARConcepts.GettingStarted | ARCCore | EnumMember | AgoRapide 2020 is an open source library for building data-oriented backend applications using .NET. |
ARCQuery.QueryExpressionRel.SyntaxHelp | ARCQuery | ClassMember | 'REL {type}' |
ARCCore.ARConcepts.CoreDBSynchronization | ARCCore | EnumMember | The concept of how multiple -CoreDB- instances synchronizes their data. |
ARCCore.ARConcepts.PropertyStream | ARCCore | EnumMember | AgoRapide, the 'streams-of-water' database". |
ARCQuery.QueryExpressionRel.StrType | ARCQuery | ClassMember | In the simplest terms, the -ToStringVeryShort- representation of the type that we are 'jumping' to. |
ARCCore.ARConcepts.SingleThreadedCode | ARCCore | EnumMember | Some practical choices have been made in AgoRapide which requires object access to be done in a single-threaded manner, or within a locking context (using for instance -ReaderWriterLockSlim-). |
ARCCore.ARConcepts.PropertyStream2D | ARCCore | EnumMember | PropertyStream2D is an expansion of the -PropertyStream- concept supported by the library -ARCEvent-. |
ARCQuery.QueryExpressionSelect | ARCQuery | Class | Selects which fields to include. |
ARCCore.ARConcepts.DataRetention | ARCCore | EnumMember | The concept of when to delete old data (if deemed necessary). |
ARCCore.ARConcepts.EventSourcing | ARCCore | EnumMember | (related to -ARCEvent-). |
ARCQuery.QueryExpressionSelect.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
ARCCore.ARConcepts.NoRealDeletion | ARCCore | EnumMember | AgoRapide has no real concept for deletion of data (apart from -DataRetention-, which is mostly relevant for 'old' data). |
ARCCore.ARConcepts.RegStream | ARCCore | EnumMember | The concept in -ARCEvent- of an "axis" (usefully referred to as the vertical axis) within the concept of -PropertyStream2D-. |
ARCQuery.QueryExpressionSelect.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
ARCCore.ARConcepts.ManyToManyRelations | ARCCore | EnumMember | -ARCQuery- supports many-to-many relations in a simple manner without introducing a third entity type (a third table). |
ARCCore.ARConcepts.EventStream | ARCCore | EnumMember | The concept in -ARCEvent- of an "axis" (usefully referred to as the horizontal axis) within the concept of -PropertyStream2D-. |
ARCQuery.QueryExpressionSelect.SyntaxHelp | ARCQuery | ClassMember | SELECT {field-1}, {field-2} ... {field-n} |
ARCCore.ARConcepts.Documentation | ARCCore | EnumMember | Thanks to the tagging of enums and classes in AgoRapide (like this description), automatically generation of documentation is possible. |
ARCCore.ARConcepts.TransientEventTree | ARCCore | EnumMember | The concept in -ARCEvent- of how an -Event- in the -EventStream- generates transient events which in turn may generate |
ARCQuery.QueryExpressionSelfCreate | ARCQuery | Class | Returns self created collection from given class type. |
ARCCore.ARConcepts.AssertionsAndDetailedExceptionMessages | ARCCore | EnumMember | The abstraction level in AgoRapide is very high. |
ARCCore.ARConcepts.TaggingOfPropertyKeys | ARCCore | EnumMember | The concept of specifying in a single place all relevant information about a given property (data field). |
ARCQuery.QueryExpressionSelfCreate.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
ARCCore.ARConcepts.ExposingApplicationState | ARCCore | EnumMember | The traditional debugging process usually entails reading through logs and querying about your application state through a debugging tool. |
ARCCore.ARConcepts.PropertyAccess | ARCCore | EnumMember | The general mechanism for accessing properties of objects in AgoRapide. |
ARCQuery.QueryExpressionSelfCreate.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
Generated 2025-07-11 10:05:58.413 UTC