[ROOT] doc DocFrag SELECT Assembly, DocFragType, Description.FirstLine() < SKIP 161 > < TAKE 240 >
240 items
| DocFragId | Assembly | DocFragType | Description.FirstLine() |
|---|---|---|---|
| ARCCore.PKHTMLAttributeP.Encoder | ARCCore | EnumMember | The class doing the HTML-encoding. |
| ARCCore.PK | ARCCore | Class | PK = AgoRapide PropertyKey. |
| ARCCore.PKLogAttributeP | ARCCore | Enum | Describes class -PKLogAttribute. |
| ARCCore.PK.TryGetEnum | ARCCore | ClassMember | Note that usually you will not have to ask for this value, usually in AgoRapide it goes the other way around, you have the enum member / enum value and want the corresponding property key. |
| ARCCore.PKLogAttributeP.DoNotLogAtAll | ARCCore | EnumMember | Originates from -DoNotLogAtAll-. |
| ARCCore.PK.TryGetV | ARCCore | ClassMember | Only type of PK, string or type of __enum is allowed to ask for (as TRequest generic type parameter). |
| ARCCore.PKLogAttributeP.CountInterval | ARCCore | EnumMember | For a value of n, log only every n'th time the property is changed. |
| ARCCore.PK.GetA | ARCCore | ClassMember | Convenience method for easy access to -BasePKAttribute- with corresponding explaining exception if fails |
| ARCCore.PKLogAttributeP.TimeInterval | ARCCore | EnumMember | Specifies a certain time interval for which the property's value shall be sent over the -PropertyStream-. |
| ARCCore.PK.TryGetA | ARCCore | ClassMember | Convenience method for easy access to -BasePKAttribute-. |
| ARCCore.PKRelAttributeP | ARCCore | Enum | Describes class -PKRelAttribute-. |
| ARCCore.PK.ModifyCleanerAndValidatorAndParserForCardinality | ARCCore | ClassMember | Called from -Initialize- after _cleaner and _validatorAndParser have been set. |
| ARCCore.PKRelAttributeP.ForeignEntity | ARCCore | EnumMember | The type of foreign entity that this property points to. |
| ARCCore.PK.ToString | ARCCore | ClassMember | Caching is supposed to be useful because may be called quite often. |
| ARCCore.PKRelAttributeP.OppositeTerm | ARCCore | EnumMember | Example: For 'Employee', the key 'SupervisorId' where the supervisor is another 'Employee', will have another meaning "as seen from" the Supervisor, namely "Subordinates" or similar. |
| ARCCore.PK.TryValidateAndParse | ARCCore | ClassMember | Parses the value according to specifications for this property key. |
| ARCCore.PKRelAttributeP.EnforceReferentialIntegrity | ARCCore | EnumMember | If TRUE then referential integrity will be enforced by -TryStore-. |
| ARCCore.PK.TryCleanValidateAndParse | ARCCore | ClassMember | Cleans and parses the value according to specifications for this property key. |
| ARCCore.PKTypeAttributeP | ARCCore | Enum | Describes class -PKTypeAttribute-. |
| ARCCore.PK.PackParseResultForStorageInEntityObject | ARCCore | ClassMember | Packs result of parsing into a -IP--derived class, suitable for sending to -AddOrUpdateP-. |
| ARCCore.PKTypeAttributeP.Type | ARCCore | EnumMember | The type of this Property. |
| ARCCore.PK.PackObjectForStorageInEntityObject | ARCCore | ClassMember | See -PackParseResultForStorageInEntityObject- for documentation. |
| ARCCore.PKTypeAttributeP.DefaultValue | ARCCore | EnumMember | The default value. |
| ARCCore.PK.FromEnum | ARCCore | ClassMember | Returns the corresponding -PK- instance from the given -PropertyKeyEnum-. |
| ARCCore.PKTypeAttributeP.Cardinality | ARCCore | EnumMember | Describes how multiple instances of a property is supposed to be handled. |
| ARCCore.PK.TryGetFromTypeAndFieldName Overload3 | ARCCore | ClassMember | Returns property key based on type and field name. |
| ARCCore.PKTypeAttributeP.IsObligatory | ARCCore | EnumMember | True means value is obligatory. |
| ARCCore.PK.TryGetFromTypeAndFieldName Overload2 | ARCCore | ClassMember | Returns property key based on type and field name. |
| ARCCore.PKTypeAttributeP.BoilerplateCodeProperties | ARCCore | EnumMember | Automatically generated boilerplate code that implements traditional setters and getters for this key. |
| ARCCore.PK.TryGetFromTypeAndFieldName Overload1 | ARCCore | ClassMember | Returns property key based on type and field name. |
| ARCCore.PP | ARCCore | Enum | Describes meta data for any class (property) implementing -IP-. |
| ARCCore.PK.GetAllPKForEntityType | ARCCore | ClassMember | Returns all property keys relevant for the given entity type, |
| ARCCore.PP.Created | ARCCore | EnumMember | Timestamp when property was created in database. |
| ARCCore.PK.GetAllPKForEntityTypeString | ARCCore | ClassMember | Returns all property keys relevant for the given entity type, |
| ARCCore.PP.Cid | ARCCore | EnumMember | Creator id (entity which created this property). |
| ARCCore.PK.BuildFromStringCache | ARCCore | ClassMember | Builds the content of -_fromStringCache- and also -_allPKForEntityTypeCache-. |
| ARCCore.PP.Value | ARCCore | EnumMember | The actual value. |
| ARCCore.PK.GetTypeMapping | ARCCore | ClassMember | Returns the relevant property key for a given type entity-type and field-type. |
| ARCCore.PP.Valid | ARCCore | EnumMember | Timestamp when property was last known to be (still) valid |
| ARCCore.PK.GetObligatoryValuesForEntityType | ARCCore | ClassMember | Returns all obligatory values (based on -IsObligatory-) |
| ARCCore.PP.Vid | ARCCore | EnumMember | Validator id, that is entity which set -Valid- for this property. |
| ARCCore.PK.Equals | ARCCore | ClassMember | Note that ToString is only based on __enum, meaning that two enum members / enum values with same name but different type, like CustomerP.Name and OrderP.Name, will be considered equal. |
| ARCCore.PP.Invalid | ARCCore | EnumMember | Timestamp when property was invalidated / 'deleted'. |
| ARCCore.PK.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCCore.PP.Iid | ARCCore | EnumMember | Invalidator id, that is entity which set -Invalid- for this property (or removed / 'undid' the invalidation by setting the value to '0001-01-01'). |
| ARCCore.PK..ctor | ARCCore | ClassMember | Constructor with 'object _enum' is necessary in order for ToString to work. |
| ARCCore.PP.ExceptionText | ARCCore | EnumMember | General property for logging of exceptions, usually set through -HandleException-. |
| ARCCore.PK.Type | ARCCore | ClassMember | Returns type from -PKTypeAttribute-'s -Type-. |
| ARCCore.PConcurrentP | ARCCore | Enum | Describes class -PConcurrent-. |
| ARCCore.PK.Cardinality | ARCCore | ClassMember | Returns cardinality from -PKTypeAttribute-'s -Cardinality-. |
| ARCCore.PConcurrentP.Heartbeat | ARCCore | EnumMember | |
| ARCCore.PK.CorrespondingClass | ARCCore | ClassMember | Returns -CorrespondingClass- based on -__enum-. |
| ARCCore.ActualConnectionP | ARCCore | Enum | Describes class -ActualConnection-. |
| ARCCore.PK.ValidatorAndParser | ARCCore | ClassMember | Validates and parses a value. |
| ARCCore.ActualConnectionP.Id | ARCCore | EnumMember | When connection is used with-StreamProcessor-, the Id should be the same as the key used in the incoming / outgoing connection dictionary collection. |
| ARCCore.PK.Cleaner | ARCCore | ClassMember | Cleanup of values, to be used before value is attempted validated. |
| ARCCore.ActualConnectionP.ConnectionInstruction | ARCCore | EnumMember | Only relevant when we are an -Outgoing-. |
| ARCCore.PK.AllEnums | ARCCore | ClassMember | All enums for the whole application. |
| ARCCore.ActualConnectionP.ConnectionDirection | ARCCore | EnumMember | |
| ARCCore.PK.AllPKEnums | ARCCore | ClassMember | All -PropertyKeyEnum--tagged enums for the whole application. |
| ARCCore.ActualConnectionP.CountReceiveMessage | ARCCore | EnumMember | |
| ARCCore.PK.__enum | ARCCore | ClassMember | This information is also found as EnumMember. |
| ARCCore.ActualConnectionP.CountSendMessage | ARCCore | EnumMember | |
| ARCCore.PKHTMLAttribute | ARCCore | Class | Contains pointer to HTML encoder for a property. |
| ARCCore.ActualConnectionP.ClientUpdatePosition | ARCCore | EnumMember | Note how this is stored both as -ClientUpdatePosition- (on the client side) and -ClientUpdatePosition- (on the server side). |
| ARCCore.PKHTMLAttribute.Encode | ARCCore | ClassMember | Encodes the given string to HTML format through the static method implemented in class -Encoder-. |
| ARCCore.ActualConnectionP.SubscriptionAsRequestedByClient | ARCCore | EnumMember | Originates from -Subscription-. |
| ARCCore.PKHTMLAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.ActualConnectionP.ClosingReason | ARCCore | EnumMember | Reason why this connection was closed |
| ARCCore.PKHTMLAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.ActualConnectionP.IsErrorCondition | ARCCore | EnumMember | Some kind of error condition has occured regarding data going back and forth, but the TCP/IP connection itself is probably sound. |
| ARCCore.PKHTMLAttribute.Encoder | ARCCore | ClassMember | See -Encoder-. |
| ARCCore.ActualConnectionP.ErrorConditionData | ARCCore | EnumMember | Detailed explanation about -IsErrorCondition- |
| ARCCore.PKHTMLAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.ActualConnectionP.UnderClosure | ARCCore | EnumMember | Set to TRUE if to be closed and reinitialized. |
| ARCCore.IHTMLEncoder | ARCCore | Class | Pseudo-interface signifying that implementing class has a static metod called 'Encode' for encoding a string to HTML. |
| ARCCore.ActualConnectionP.MonkeyWrench | ARCCore | EnumMember | |
| ARCCore.PKLogAttribute | ARCCore | Class | Explains how logging of changes to a property should be done. |
| ARCCore.ActualConnectionP.PartnerIPAddress | ARCCore | EnumMember | TODO: Use more strongly typing for this. |
| ARCCore.PKLogAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.ConnectionInstructionP | ARCCore | Enum | Describes class -ConnectionInstruction-. |
| ARCCore.PKLogAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.ConnectionInstructionP.ClientId | ARCCore | EnumMember | The AgoRapide node-id for which this connection is relevant. Used for distributing over the -PropertyStream- information to the clients about which possible nodes they can connect to. |
| ARCCore.PKLogAttribute.DoNotLogAtAll | ARCCore | ClassMember | See -DoNotLogAtAll-. |
| ARCCore.ConnectionInstructionP.ServerHostName | ARCCore | EnumMember | The host (DNS or IP-address) for which to connect. |
| ARCCore.PKLogAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.ConnectionInstructionP.ServerPortNo | ARCCore | EnumMember | The port number for which to connect. |
| ARCCore.PKRelAttribute | ARCCore | Class | Describes relationships between entities (between tables in RDBMS terms). |
| ARCCore.ConnectionInstructionP.ConnectionId | ARCCore | EnumMember | Usually a combination of -ClientId-, -ServerHostName- and -ServerPortNo-. |
| ARCCore.PKRelAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.ConnectionInstructionP.DataTransferDirection | ARCCore | EnumMember | |
| ARCCore.PKRelAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.ConnectionInstructionP.Subscription | ARCCore | EnumMember | The actual subscripton. This is what the connecting party / (downstream) client would send over its TCP/IP connection to the (upstream) server. |
| ARCCore.PKRelAttribute.ForeignEntity | ARCCore | ClassMember | See -ForeignEntity-. |
| ARCCore.ConnectionInstructionP.MultipleConnectionUsage | ARCCore | EnumMember | |
| ARCCore.PKRelAttribute.OppositeTerm | ARCCore | ClassMember | See -OppositeTerm-. |
| ARCCore.ConnectionInstructionP.Sharding | ARCCore | EnumMember | |
| AgoBrowse.Controllers.ControllerFacade.CatchAll Overload2 | AgoBrowse | ClassMember | Catches all HTTP GET requests to this API. |
| ARCCore.PKRelAttribute.EnforceReferentialIntegrity | ARCCore | ClassMember | See -EnforceReferentialIntegrity-. |
| ARCCore.MultipleConnectionUsage | ARCCore | Enum | Enables fault-tolerance by describing use of multiple connections |
| AgoBrowse.Controllers.ControllerFacade.CatchAll Overload1 | AgoBrowse | ClassMember | Catches all HTTP POST requests to this API. |
| ARCCore.PKRelAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.MultipleConnectionUsage.Admin | ARCCore | EnumMember | Connection is a special administrative connection to a central 'command-and-control' server which instructs which connections to make. |
| Namespace ARCCore | Namespace | A necessary library (.DLL in Windows terms) that every -ARNodeType- should link to. | |
| ARCCore.PKTypeAttribute | ARCCore | Class | Contains the most basic essential information about a property key, like its description, -Type-, -Cardinality-, -IsObligatory- and -DefaultValue-. |
| ARCCore.MultipleConnectionUsage.RoundRobin | ARCCore | EnumMember | This connection to be used in a turn based system, together with other connections with -RoundRobin-. |
| Namespace ARCDoc | Namespace | A library supporting documentation and demonstrating usage of AgoRapide. | |
| ARCCore.PKTypeAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.MultipleConnectionUsage.Simultaneous | ARCCore | EnumMember | This connection to be used simultaneously with other connections with -Simultaneous- |
| Namespace ARCQuery | Namespace | ARCQuery provides a query language that mimicks SQL but is usable through HTTP as GET URLs. | |
| ARCCore.PKTypeAttribute.StandardValidatorAndParser | ARCCore | ClassMember | Returns validator and parser for well known types like string, int, long, bool, DateTime, TimeSpan, Type, Uri. |
| ARCCore.StreamProcessorP | ARCCore | Enum | Describes class -StreamProcessor-. |
| Namespace ARCAPI | Namespace | A library providing an API on top of the -PropertyStream-. | |
| ARCCore.PKTypeAttribute.StandardCleaner | ARCCore | ClassMember | Returns a cleaner for well known types like bool |
| ARCCore.StreamProcessorP.LocalStorageFolder | ARCCore | EnumMember | The local path to which new properties are stored. Should NOT end with any trailing DirectorySeparatorChar |
| Namespace AgoBrowse | Namespace | ||
| ARCCore.PKTypeAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.StreamProcessorP.IndividualStorageFileSize | ARCCore | EnumMember | Max size (in bytes) for a single storage file before a new file is created by call to -StreamProcessor.CreateNewStorageFile-. |
| Namespace AgoBrowse.Controllers | Namespace | ||
| ARCCore.PKTypeAttribute.Type | ARCCore | ClassMember | See -Type-. |
| ARCCore.StreamProcessorP.CurrentlyInitializing | ARCCore | EnumMember | Set to TRUE at initialization (signals for instance -ReceiveAndDistribute- that it can only queue messages, not process them). |
| ARCCore.PKTypeAttribute.Cardinality | ARCCore | ClassMember | See -Cardinality-. |
| ARCCore.StreamProcessorP.ClientUpdatePositionPath | ARCCore | EnumMember | Complete path to file containing -ClientUpdatePosition-. |
| ARCCore.PKTypeAttribute.DefaultValue | ARCCore | ClassMember | See -DefaultValue-. |
| ARCCore.StreamProcessorP.ClientUpdatePosition | ARCCore | EnumMember | Note how this is stored both as -ClientUpdatePosition- (on the client side) and -ClientUpdatePosition- (on the server side). |
| ARCCore.PKTypeAttribute.IsObligatory | ARCCore | ClassMember | See -IsObligatory-. |
| ARCCore.StreamProcessorP.IncomingConnectionsPortNo | ARCCore | EnumMember | If not set, then class will not listen for incoming connections (meaning that our application is probably a -Client-). |
| ARCCore.PKTypeAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.StreamProcessorP.UnderClosure | ARCCore | EnumMember | Set to TRUE if to be closed, whenever an exception occurs or when class goes out of scope |
| ARCCore.IP | ARCCore | Class | IP = IProperty. |
| ARCCore.StreamProcessorP.WriteToConsole | ARCCore | EnumMember | If true then incoming data (from other nodes will be written to console. |
| ARCCore.IP.TryGetV Overload2 | ARCCore | ClassMember | The actual value of the property. Mostly relevant for single-value properties like -PValue-. |
| ARCCore.StreamProcessorP.Timestamp | ARCCore | EnumMember | The timestamp inserted at regular intervals in the -PropertyStream- according to -TimestampResolution-. |
| ARCCore.IP.Inc | ARCCore | ClassMember | Increments given property key by 1. Sets to 1 if not found. Uses long, not integer. |
| ARCCore.StreamProcessorP.TimestampIsOld | ARCCore | EnumMember | A warning sent by -StreamProcessor- to -OutsideLocalReceiver- when it knows that data as served is out of date. |
| ARCCore.IP.Dec | ARCCore | ClassMember | Decrements given property key by 1. Sets to -1 if not found. Uses long, not integer. |
| ARCCore.StreamProcessorP.TimestampResolution | ARCCore | EnumMember | The time interval between each timestamp update in the -PropertyStream-. |
| ARCCore.IP.Log | ARCCore | ClassMember | The 'final' overload of -Log- that is called by the other overloads. |
| ARCCore.StreamProcessorP.DoNotStoreLocally | ARCCore | EnumMember | For -Client-, incoming data (as received from a -Outgoing-) is possible to store BOTH to disk, AND to (normally) a -PRich-. |
| ARCCore.IP.LogExecuteTime | ARCCore | ClassMember | Times the execution of the given function and logs details about elapsed time. |
| ARCCore.StreamProcessorP.DoNotStoreLocalOriginLocally | ARCCore | EnumMember | Means 'do not store local origin locally but wait until it gets confirmed by core storage'. |
| ARCCore.IP.HandleException | ARCCore | ClassMember | Note that most relevant to use for -PConcurrent-. |
| ARCCore.StreamProcessorP.CacheDiskWrites | ARCCore | EnumMember | If TRUE then will write the -PropertyStream- to disk in bigger chunks, thereby increasing performance. |
| ARCCore.IP.TryParseDtr | ARCCore | ClassMember | Parses a PropertyStreamLine- beginning with -dtr-. |
| ARCCore.StreamProcessorP.CopyFileStructureFromCore | ARCCore | EnumMember | If TRUE, will copy the exact file structure (through information given in -ClientUpdatePosition-). |
| ARCCore.IP.Initialize | ARCCore | ClassMember | Note that has a default implementation (doing nothing). |
| ARCCore.StreamProcessorP.CountIncomingConnections | ARCCore | EnumMember | |
| ARCCore.IP.AssertIntegrity | ARCCore | ClassMember | See -TryAssertIntegrity-. |
| ARCCore.StreamProcessorP.CountOutgoingConnections | ARCCore | EnumMember | |
| ARCCore.IP.TryAssertIntegrity | ARCCore | ClassMember | Asserts the integrity of this entity. |
| ARCCore.StreamProcessorP.CountOutsideLocalReceiver | ARCCore | EnumMember | Count of calls to -OutsideLocalReceiver-. |
| ARCCore.IP.ToString | ARCCore | ClassMember | The ToString()-implementation in the classes implementing this interface is supposed to give a short concise representation of the object for debugging and logging purposes, that is, intended for human consumption. The most 'important' implementation is probably the one in -PRich- (-ToString-) because that one is often the basis for your entity classes like 'Customer', 'Order' and so on |
| ARCCore.StreamProcessorP.CountReceiveLocalOrigin | ARCCore | EnumMember | Count of -PropertyStreamLine- with -HasLocalOrigin-. |
| ARCCore.IP.TrySetPP | ARCCore | ClassMember | SetPP = set property of property. Sets property of entity contained within this class. |
| ARCCore.StreamProcessorP.CountReceiveNonLocalOrigin | ARCCore | EnumMember | Count of -PropertyStreamLine- not with -HasLocalOrigin-. |
| ARCCore.IP.GetKeysEqualToValue | ARCCore | ClassMember | Returns properties which themselves again have key and value equal to the given key and value. |
| ARCCore.StorageFileP | ARCCore | Enum | Describes class -StorageFile-. |
| ARCCore.IP.OnTrySetP | ARCCore | ClassMember | Event handler to be called by -TrySetP- before it changes a property value (but AFTER it has done any validity checks, that is, after it has 'decided' to return TRUE, in other words, event handler should be called when change is guaranteed to go through, but before it actually has been done). |
| ARCCore.StorageFileP.Filename | ARCCore | EnumMember | |
| ARCCore.IP.TryGetP | ARCCore | ClassMember | Gets a single property for this object |
| ARCCore.StorageFileP.Hash | ARCCore | EnumMember | Hash of storage file. Not implemented as of Apr 2020. It is envisaged to store hash-value as last line in storage file. In this case the hash must be the hash of the file excluding the last line |
| ARCCore.IP.ToPropertyStream | ARCCore | ClassMember | Turns object into a -PropertyStream- |
| ARCCore.ConnectionDirection | ARCCore | Enum | The concept of who took the initiative for the connections (who asked to open the TCP/IP session). |
| ARCCore.IP.ToJSONSerializeable | ARCCore | ClassMember | Prepares the data into a format acceptable for System.Text.Json.JsonSerializer.Serialize. |
| ARCCore.ConnectionDirection.Incoming | ARCCore | EnumMember | ConnectionInstruction will not be set for these. |
| ARCCore.IP.GetValueForJSONSerializer | ARCCore | ClassMember | Practical approach to serializing of -IP- based values to JSON. |
| ARCCore.ConnectionDirection.Outgoing | ARCCore | EnumMember | There would normally exist two live outgoing connection at a given point in time for -Client- / -ArmDB-: |
| ARCCore.IP.TrySetP | ARCCore | ClassMember | Set property regardless of whether exists or not. |
| ARCCore.DataTransferDirection | ARCCore | Enum | Direction for transfer of data. |
| ARCCore.IP.TryGetV Overload1 | ARCCore | ClassMember | The actual 'unpacking' of the object. |
| ARCCore.DataTransferDirection.Send | ARCCore | EnumMember | Like -Client- sending in-application generated properties to -ArmDB- / -CoreDB- or -ArmDB- sending data received over an incoming connection to -CoreDB-. |
| ARCCore.IP.DeepCopy | ARCCore | ClassMember | Creates a deep copy of this object instance, that is, a copy with all new object instances (except for immutable objects). |
| ARCCore.DataTransferDirection.Receive | ARCCore | EnumMember | Like -Client- receiving data from an upstream -ArmDB- / -CoreDB- or -ArmDB- receiving data from an upstream -CoreDB-. |
| ARCCore.IP.AddPV Overload2 | ARCCore | ClassMember | NOTE: The different AddPV / AddP overloads should only be used if you want an assertion against the |
| ARCCore.TPropertyKeyEnum | ARCCore | Enum | Placeholder for any enum type suitable as generic type parameter for -PExact-. |
| ARCCore.IP.AddPV Overload1 | ARCCore | ClassMember | Adds a property value (as a -PValue-) for this objectThrows -KeyAlreadyExistsException- when relevant. |
| Assembly ARCDoc | Assembly | A library supporting documentation and demonstrating usage of AgoRapide. | |
| ARCCore.IP.AddP | ARCCore | ClassMember | Adds a property for this object. |
| ARCDoc.Apple | ARCDoc | Class | The most 'standard' way of implementing an entity-class in AgoRapide, by just inheriting -PRich-. |
| ARCCore.IP.AddOrUpdateP | ARCCore | ClassMember | Duplicates functionality of SetP. |
| ARCDoc.Apple.AddName | ARCDoc | ClassMember | Convenience method, not obligatory. |
| ARCCore.IP.GetOrAddPV | ARCCore | ClassMember | Gets value. If not set then value will be added |
| ARCDoc.Apple.GetName | ARCDoc | ClassMember | Convenience method, not obligatory. |
| ARCCore.IP.GetPV | ARCCore | ClassMember | Gets a single property's value for this object. Returns default value if not successful. |
| ARCDoc.Apple.TryGetName | ARCDoc | ClassMember | Convenience method, not obligatory. |
| ARCCore.IP.TryGetPV | ARCCore | ClassMember | Gets a single property's value for the given property key. |
| ARCDoc.Apple.TryGetP | ARCDoc | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCCore.IP.IsValid | ARCCore | ClassMember | Note that by default all properties are 'valid' but because of -NoRealDeletion-, we must have a mechanism for invalidating properties. This property returns FALSE if property has been invalidated and timestamp for invalidation is not '0001-01-01'. |
| ARCDoc.Apple.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.IP.Item | ARCCore | ClassMember | Offers string-based direct indexing. |
| ARCDoc.Apple.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.IP.Keys | ARCCore | ClassMember | Returns all the keys for this instance. |
| ARCDoc.Apple.Name | ARCDoc | ClassMember | Convenience method, not obligatory. |
| ARCCore.IP.Values | ARCCore | ClassMember | Returns all the values (all the properties) for this instance. |
| ARCDoc.Banana | ARCDoc | Class | Implements -IP- directly and uses traditional property storage for optimum -MemoryConsumption- efficiency. |
| ARCCore.IP.Logger | ARCCore | ClassMember | Describes a logger. |
| ARCDoc.Banana.Name | ARCDoc | ClassMember | Annotated as nullable in order to keep flexibility of -PropertyAccess-, including what happens if values are not set (TryGetP etc) |
| ARCCore.IP.AllIPDerivedTypes | ARCCore | ClassMember | All relevant -IP--derived types for the whole application. |
| ARCDoc.Banana.Colour | ARCDoc | ClassMember | Annotated as nullable in order to keep flexibility of -PropertyAccess-, including what happens if values are not set (TryGetP etc) |
| ARCCore.IP.AllIPDerivedTypesWithPKEnum | ARCCore | ClassMember | All relevant -IP--derived types for the whole application for which the also is defined a -PropertyKeyEnum-. |
| ARCDoc.Demonstrator | ARCDoc | Class | Demonstrates various concepts from -ARCCore-, especially -PropertyAccess-. |
| ARCCore.IP.AllIPDerivedTypesWithPKEnumApplicationSpecific | ARCCore | ClassMember | All relevant -IP--derived types for the -ApplicationSpecificCode- part of the application for which also is defined a -PropertyKeyEnum-. |
| ARCDoc.Demonstrator.DemonstratePropertyAccessApple | ARCDoc | ClassMember | Demonstrates use of -PropertyAccess- through the -Apple- class. |
| ARCCore.IP.AllIPDerivedEntityCollectionClassesDict | ARCCore | ClassMember | All -IP--derived types for which is found a corresponding class with name like '{EntityType}Collection' |
| ARCDoc.Demonstrator.DemonstratePropertyAccessOrange | ARCDoc | ClassMember | Demonstrates use of -PropertyAccess- through the -Orange- class. |
| ARCCore.IP.AllIPDerivedTypesInludingGenericAndAbstract | ARCCore | ClassMember | All relevant -IP--derived types (except the interface -IP- itself) known to the application. |
| ARCDoc.Demonstrator.DemonstratePropertyAccessBanana | ARCDoc | ClassMember | Demonstrates use of -PropertyAccess- through the -Banana- class. |
| ARCCore.IP.AllIPDerivedTypesDict | ARCCore | ClassMember | Provides lookup of a type in -AllIPDerivedTypes- given its string representation. |
| ARCDoc.Demonstrator.DemonstrateITypeDescriber | ARCDoc | ClassMember | Demonstrates use of -ITypeDescriber- for describing single-property values. |
| ARCCore.IP.AllIPDerivedTypesDictIKType | ARCCore | ClassMember | Same as -AllIPDerivedTypesDict- except that value is -IKType-, not string. |
| ARCDoc.Demonstrator.DemonstratePRichHierarchicalStorage | ARCDoc | ClassMember | Demonstrates use of -PRich-, how it receives -PropertyStream--lines and builds up a strongly typed hierarchical object storage. |
| ARCCore.P | ARCCore | Class | 'Dummy'-class, not necessarily in use. See -PP- for more information. Created because of the concept of CorrespondingClass which is strictly enforced |
| ARCDoc.Demonstrator.DemonstratePropertyStream | ARCDoc | ClassMember | Demonstrates use of -PropertyStream- by generating local data (documentation data) and writing locally to console. |
| ARCCore.P.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCDoc.Demonstrator.DemonstrateBareBonesClient | ARCDoc | ClassMember | Demonstrates adding -PropertyStream--lines to -CoreDB- without using ANY AgoRapide component, only standard TCP/IP functionality in .NET. |
| ARCCore.P.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCDoc.Demonstrator.DemonstrateLogConsole | ARCDoc | ClassMember | Demonstrates a quite simple log console. |
| ARCCore.P.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.Demonstrator.DemonstrateStreamProcessorAsClient | ARCDoc | ClassMember | Demonstrates use of -StreamProcessor- as a general client. |
| ARCCore.ICreated | ARCCore | Class | A dummy interface signifying that implementing class has the ability to store (in-memory) metadata -Created- |
| ARCDoc.Orange | ARCDoc | Class | Inherits -PExact- for probably the best compromise between memory consumption and easy of development. |
| ARCCore.PCollection | ARCCore | Class | A class useful for storing a collection of entities (a table in RDBMS-terms) because it implements -Indexing-. |
| ARCDoc.Orange.SetPVDirect | ARCDoc | ClassMember | High performance alternative to -TrySetP-, accessing -Storage- more direct. |
| ARCCore.PCollection.TrySetPP | ARCCore | ClassMember | Replaces default interface method -TrySetPP-. |
| ARCDoc.Orange.GetPVDirect | ARCDoc | ClassMember | High performance alternative to -TryGetP-, accessing -Storage- more direct. |
| ARCCore.PCollection.GetKeysEqualToValue | ARCCore | ClassMember | Returns properties which themselves again have key and value equal to the given key and value. |
| ARCDoc.Orange.TryGetPVDirect | ARCDoc | ClassMember | High performance alternative to -TryGetP-, accessing -Storage- more direct. |
| ARCCore.PCollection.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCDoc.Orange.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.PCollection.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCDoc.Orange.Name | ARCDoc | ClassMember | See -Name- for more information. |
| ARCCore.PCollection.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.Orange.Storage | ARCDoc | ClassMember | Uses int-value of -__enum- minus 1 as index. |
| ARCCore.IGetKeysEqualToValue | ARCCore | Class | Interface stating that implementing class does not use the default implementation of -GetKeysEqualToValue- (which does not use -Indexing-) but has replaced it with a more efficient implementation assumed to utilize -Indexing-. |
| ARCDoc.SomeAppComponent | ARCDoc | Class | Demonstrates how also your actual application classes, not only your data classes, should implement -IP-. |
| ARCCore.PConcurrent | ARCCore | Class | A (somewhat) thread-safe alternative to -PRich- which also supports -ExposingApplicationState- (through -Logger-). |
| ARCDoc.SomeAppComponent.MethodC | ARCDoc | ClassMember | Note structured format in logging. |
| ARCCore.PConcurrent.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.SomeAppComponent.MethodD | ARCDoc | ClassMember | Same as MethodC- but returns data ('Func<string>()' instead of 'Action()') |
| ARCCore.PExact<TEnumType> | ARCCore | Class | Very -MemoryConsumption- efficient alternative to -PRich-. |
Generated 2025-07-11 03:37:17.836 UTC