[ROOT] doc DocFrag SELECT Assembly, DocFragType, Description.FirstLine() < SKIP 27 > < TAKE 1000
1000 items
| DocFragId | Assembly | DocFragType | Description.FirstLine() |
|---|---|---|---|
| ARCCore.EnumMemberAttribute.GetAttribute | ARCCore | ClassMember | Note that illegal to call for -PropertyKeyEnum-. |
| ARCCore.EnumMemberAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.EnumMemberAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.EnumMemberAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.IPAttribute | ARCCore | Class | Describes -IP- classes (describes at class-level) |
| ARCCore.CardinalityExtensions | ARCCore | Class | |
| ARCCore.CardinalityExtensions.IsMultiple | ARCCore | ClassMember | Returns TRUE if given cardinality implies that multiple items are stored simultaneously in a typical in-memory data storage. |
| ARCCore.Extensions | ARCCore | Class | Contains a few general nice to have extensions methods. |
| ARCCore.Extensions.ToStringShort | ARCCore | ClassMember | Returns a shorter representation than -ToStringDB-. |
| ARCCore.Extensions.ToStringVeryShort | ARCCore | ClassMember | Returns same as -ToStringShort- but without any generics information at all. |
| ARCCore.Extensions.AddValue | ARCCore | ClassMember | Gives better error messages compared to 'original' Add when adding a value to a directory if key already exists |
| ARCCore.Extensions.KeysAsString | ARCCore | ClassMember | Gives a compressed overview of keys in a dictionary. Helpful for building exception messages. |
| ARCCore.Extensions.GetValue | ARCCore | ClassMember | Gives better error messages when reading value from directory if key does not exist |
| ARCCore.Extensions.Single | ARCCore | ClassMember | Same as inbuilt LINQ's Single except that gives a more friendly exception message |
| ARCCore.IKIP | ARCCore | Class | Container class for key (-IK-), and value (-IP-). |
| ARCCore.IKIP.AssertTypeIntegrity | ARCCore | ClassMember | See -TryAssertTypeIntegrity- for documentation. |
| ARCCore.IKIP.TryAssertTypeIntegrity | ARCCore | ClassMember | Asserts that value is of correct type as specified by the key. |
| ARCCore.IK | ARCCore | Class | IK = Interface Key / Index key. Key used to lookup 'inside' an instance of -IP-. |
| ARCCore.IKCoded.FromEncoded | ARCCore | ClassMember | Note how uses instance cache if already exists there. |
| ARCCore.IKCoded.TryEncode | ARCCore | ClassMember | Returns a string containing only characters in -AllowedEncodedCharacters-. |
| ARCCore.IKCoded.ToString | ARCCore | ClassMember | Returns -Encoded-'s string representation. |
| ARCCore.IKCoded.Encoded | ARCCore | ClassMember | This string value can be used directly in folder names, file names and HTTP URL's without any further encoding being necessary. |
| ARCCore.IKDate.op_Equality | ARCCore | ClassMember | It is quite natural in the code to write code like "if (a.CustomerId == b.CustomerId)", therefore the need to implement == and != operators here. |
| ARCCore.IKDate.EnrichKey | ARCCore | ClassMember | 'Implementing' -ITypeDescriber-. |
| ARCCore.IKDate.ValidDateTimeFormats | ARCCore | ClassMember | Note: Be very careful about expanding this array. ToString must be considered, and also how Equals should work with other sub classes of IK. |
| ARCCore.IKLong | ARCCore | Class | A more memory efficient alternative to -IKString-. |
| ARCCore.IKString.FromString | ARCCore | ClassMember | Note how uses instance cache if already exists there |
| ARCCore.IKString.op_Equality | ARCCore | ClassMember | It is quite natural in the code to write code like "if (a.CustomerId == b.CustomerId)", therefore the need to implement == and != operators here. |
| ARCCore.IKString.EnrichKey | ARCCore | ClassMember | 'Implementing' -ITypeDescriber-. |
| ARCCore.IKType | ARCCore | Class | Index key used when storing a collection of a given type, like 'Customer'. |
| ARCCore.ParseResult.Result | ARCCore | ClassMember | Will be null if ErrorResponse is set. |
| ARCCore.ParseResult.ErrorResponse | ARCCore | ClassMember | Will be null if Result is set |
| ARCCore.PK | ARCCore | Class | PK = AgoRapide PropertyKey. |
| ARCCore.PK.TryGetEnum | ARCCore | ClassMember | Note that usually you will not have to ask for this value, usually in AgoRapide it goes the other way around, you have the enum member / enum value and want the corresponding property key. |
| ARCCore.PK.TryGetV | ARCCore | ClassMember | Only type of PK, string or type of __enum is allowed to ask for (as TRequest generic type parameter). |
| ARCCore.PK.GetA | ARCCore | ClassMember | Convenience method for easy access to -BasePKAttribute- with corresponding explaining exception if fails |
| ARCCore.PK.TryGetA | ARCCore | ClassMember | Convenience method for easy access to -BasePKAttribute-. |
| ARCCore.PK.ModifyCleanerAndValidatorAndParserForCardinality | ARCCore | ClassMember | Called from -Initialize- after _cleaner and _validatorAndParser have been set. |
| ARCCore.PK.GetAllPKForEntityTypeString | ARCCore | ClassMember | Returns all property keys relevant for the given entity type, |
| ARCCore.Extensions.ToStringDB | ARCCore | ClassMember | Gives the minimum representation of type as string suitable for later reconstruction by -GetType-. |
| ARCCore.PK.BuildFromStringCache | ARCCore | ClassMember | Builds the content of -_fromStringCache- and also -_allPKForEntityTypeCache-. |
| ARCCore.Extensions.ForEach | ARCCore | ClassMember | Useful when we want to write collection.ForEach( ... ) instead of |
| ARCCore.PK.GetTypeMapping | ARCCore | ClassMember | Returns the relevant property key for a given type entity-type and field-type. |
| ARCCore.Extensions.Use | ARCCore | ClassMember | Convenience method that shortens down code in cases where an instance of an object must be created first in order to use that same variable multiple times |
| ARCCore.PK.GetObligatoryValuesForEntityType | ARCCore | ClassMember | Returns all obligatory values (based on -IsObligatory-) |
| ARCCore.Extensions.SingleOrDefault | ARCCore | ClassMember | Same as inbuilt LINQ's SingleOrDefault except that gives a more friendly exception message |
| ARCCore.PK.Equals | ARCCore | ClassMember | Note that ToString is only based on __enum, meaning that two enum members / enum values with same name but different type, like CustomerP.Name and OrderP.Name, will be considered equal. |
| ARCCore.Extensions.Result | ARCCore | ClassMember | Returns heading plus return-value of function (calls function). If function == null then empty string is returned |
| ARCCore.PK.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCCore.Extensions.ToStringDateAndTime | ARCCore | ClassMember | Uses format 'yyyy-MM-dd HH:mm:ss.fff'. |
| ARCCore.PK..ctor | ARCCore | ClassMember | Constructor with 'object _enum' is necessary in order for ToString to work. |
| ARCCore.Extensions.ToStringWithMS | ARCCore | ClassMember | Uses either format 'd\.hh\:mm\:ss\.fff' or 'hh\:mm\:ss\.fff' depending on TotalHours >=24 hours or not. |
| ARCCore.PK.Type | ARCCore | ClassMember | Returns type from -PKTypeAttribute-'s -Type-. |
| ARCCore.IKCoded | ARCCore | Class | Understands coded and unencoded variants of -IK-. |
| ARCCore.PKHTMLAttribute.Encode | ARCCore | ClassMember | Encodes the given string to HTML format through the static method implemented in class -Encoder-. |
| ARCCore.IKCoded.EnrichKey | ARCCore | ClassMember | 'Implementing' -ITypeDescriber-. |
| ARCCore.PKHTMLAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.IKCoded.TryCheckValidEncodedValue | ARCCore | ClassMember | Checks if encoded value is valid. |
| ARCCore.PKHTMLAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.IKCoded.FromCacheEncoded | ARCCore | ClassMember | Reduces number of objects generated by caching those known to be within a limited range |
| ARCCore.PKHTMLAttribute.Encoder | ARCCore | ClassMember | See -Encoder-. |
| ARCCore.IKCoded.FromCacheUnencoded | ARCCore | ClassMember | Reduces number of objects generated by caching those known to be within a limited range |
| ARCCore.PKHTMLAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.IKCoded.AllowedEncodedCharacters | ARCCore | ClassMember | The character set 'A...Za...z0...9-_().,='. |
| ARCCore.IHTMLEncoder | ARCCore | Class | Pseudo-interface signifying that implementing class has a static metod called 'Encode' for encoding a string to HTML. |
| ARCCore.IKDate | ARCCore | Class | A more memory efficient alternative to -IKString- (together with -IKLong-). |
| ARCCore.PKLogAttribute | ARCCore | Class | Explains how logging of changes to a property should be done. |
| ARCCore.IKLong.op_Equality | ARCCore | ClassMember | It is quite natural in the code to write code like "if (a.CustomerId == b.CustomerId)", therefore the need to implement == and != operators here. |
| ARCCore.PKLogAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.IKLong.EnrichKey | ARCCore | ClassMember | 'Implementing' -ITypeDescriber-. |
| ARCCore.PKRelAttribute.EnforceReferentialIntegrity | ARCCore | ClassMember | See -EnforceReferentialIntegrity-. |
| ARCCore.IKString | ARCCore | Class | Index key for any general id, like primary-key or sequence-number or similar. |
| ARCCore.PKRelAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.IKString.FromCache | ARCCore | ClassMember | Reduces number of objects generated by caching those known to be within a limited range |
| ARCCore.PKTypeAttribute | ARCCore | Class | Contains the most basic essential information about a property key, like its description, -Type-, -Cardinality-, -IsObligatory- and -DefaultValue-. |
| ARCCore.IKType.ToString | ARCCore | ClassMember | Caching is supposed to be useful because may be called quite often. |
| ARCCore.PKTypeAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.ITypeDescriber | ARCCore | Class | Provides a standardized mechanism for describing single-property values (like 'PhoneNumber' of 'Customer' for instance). |
| ARCCore.PKTypeAttribute.StandardValidatorAndParser | ARCCore | ClassMember | Returns validator and parser for well known types like string, int, long, bool, DateTime, TimeSpan, Type, Uri. |
| ARCCore.ITypeDescriber.GetSyntaxHelp | ARCCore | ClassMember | Enables explanation of syntax in different contexts from one source: |
| ARCCore.PKTypeAttribute.StandardCleaner | ARCCore | ClassMember | Returns a cleaner for well known types like bool |
| ARCCore.ParseResult | ARCCore | Class | NOTE: Concept is very old, from the dark ages of AgoRapide's very first inception. There might be room for improvement. |
| ARCCore.PKTypeAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.PK.ToString | ARCCore | ClassMember | Caching is supposed to be useful because may be called quite often. |
| ARCCore.PKTypeAttribute.Type | ARCCore | ClassMember | See -Type-. |
| ARCCore.PK.TryValidateAndParse | ARCCore | ClassMember | Parses the value according to specifications for this property key. |
| ARCCore.IP.TrySetPP | ARCCore | ClassMember | SetPP = set property of property. Sets property of entity contained within this class. |
| ARCCore.PK.TryCleanValidateAndParse | ARCCore | ClassMember | Cleans and parses the value according to specifications for this property key. |
| ARCCore.IP.GetKeysEqualToValue | ARCCore | ClassMember | Returns properties which themselves again have key and value equal to the given key and value. |
| ARCCore.PK.PackParseResultForStorageInEntityObject | ARCCore | ClassMember | Packs result of parsing into a -IP--derived class, suitable for sending to -AddOrUpdateP-. |
| ARCCore.IP.OnTrySetP | ARCCore | ClassMember | Event handler to be called by -TrySetP- before it changes a property value (but AFTER it has done any validity checks, that is, after it has 'decided' to return TRUE, in other words, event handler should be called when change is guaranteed to go through, but before it actually has been done). |
| ARCCore.PK.PackObjectForStorageInEntityObject | ARCCore | ClassMember | See -PackParseResultForStorageInEntityObject- for documentation. |
| ARCCore.IP.TryGetP | ARCCore | ClassMember | Gets a single property for this object |
| ARCCore.PK.FromEnum | ARCCore | ClassMember | Returns the corresponding -PK- instance from the given -PropertyKeyEnum-. |
| ARCCore.IP.ToPropertyStream | ARCCore | ClassMember | Turns object into a -PropertyStream- |
| ARCCore.PK.TryGetFromTypeAndFieldName Overload3 | ARCCore | ClassMember | Returns property key based on type and field name. |
| ARCCore.IP.ToJSONSerializeable | ARCCore | ClassMember | Prepares the data into a format acceptable for System.Text.Json.JsonSerializer.Serialize. |
| ARCCore.PK.TryGetFromTypeAndFieldName Overload2 | ARCCore | ClassMember | Returns property key based on type and field name. |
| ARCCore.IP.GetValueForJSONSerializer | ARCCore | ClassMember | Practical approach to serializing of -IP- based values to JSON. |
| ARCCore.PK.TryGetFromTypeAndFieldName Overload1 | ARCCore | ClassMember | Returns property key based on type and field name. |
| ARCCore.IP.TrySetP | ARCCore | ClassMember | Set property regardless of whether exists or not. |
| ARCCore.PK.GetAllPKForEntityType | ARCCore | ClassMember | Returns all property keys relevant for the given entity type, |
| ARCCore.IP.TryGetV Overload1 | ARCCore | ClassMember | The actual 'unpacking' of the object. |
| ARCCore.PK.Cardinality | ARCCore | ClassMember | Returns cardinality from -PKTypeAttribute-'s -Cardinality-. |
| ARCCore.IP.DeepCopy | ARCCore | ClassMember | Creates a deep copy of this object instance, that is, a copy with all new object instances (except for immutable objects). |
| ARCCore.PK.CorrespondingClass | ARCCore | ClassMember | Returns -CorrespondingClass- based on -__enum-. |
| ARCCore.IP.AddPV Overload2 | ARCCore | ClassMember | NOTE: The different AddPV / AddP overloads should only be used if you want an assertion against the |
| ARCCore.PK.ValidatorAndParser | ARCCore | ClassMember | Validates and parses a value. |
| ARCCore.IP.AddPV Overload1 | ARCCore | ClassMember | Adds a property value (as a -PValue-) for this objectThrows -KeyAlreadyExistsException- when relevant. |
| ARCCore.PK.Cleaner | ARCCore | ClassMember | Cleanup of values, to be used before value is attempted validated. |
| ARCCore.IP.AddP | ARCCore | ClassMember | Adds a property for this object. |
| ARCCore.PK.AllEnums | ARCCore | ClassMember | All enums for the whole application. |
| ARCCore.IP.AddOrUpdateP | ARCCore | ClassMember | Duplicates functionality of SetP. |
| ARCCore.PK.AllPKEnums | ARCCore | ClassMember | All -PropertyKeyEnum--tagged enums for the whole application. |
| ARCCore.IP.GetOrAddPV | ARCCore | ClassMember | Gets value. If not set then value will be added |
| ARCCore.PK.__enum | ARCCore | ClassMember | This information is also found as EnumMember. |
| ARCCore.IP.GetPV | ARCCore | ClassMember | Gets a single property's value for this object. Returns default value if not successful. |
| ARCCore.PKHTMLAttribute | ARCCore | Class | Contains pointer to HTML encoder for a property. |
| ARCCore.IP.AllIPDerivedTypesWithPKEnumApplicationSpecific | ARCCore | ClassMember | All relevant -IP--derived types for the -ApplicationSpecificCode- part of the application for which also is defined a -PropertyKeyEnum-. |
| ARCCore.PKLogAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.IP.AllIPDerivedEntityCollectionClassesDict | ARCCore | ClassMember | All -IP--derived types for which is found a corresponding class with name like '{EntityType}Collection' |
| ARCCore.PKLogAttribute.DoNotLogAtAll | ARCCore | ClassMember | See -DoNotLogAtAll-. |
| ARCCore.IP.AllIPDerivedTypesInludingGenericAndAbstract | ARCCore | ClassMember | All relevant -IP--derived types (except the interface -IP- itself) known to the application. |
| ARCCore.PKLogAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.IP.AllIPDerivedTypesDict | ARCCore | ClassMember | Provides lookup of a type in -AllIPDerivedTypes- given its string representation. |
| ARCCore.PKRelAttribute | ARCCore | Class | Describes relationships between entities (between tables in RDBMS terms). |
| ARCCore.IP.AllIPDerivedTypesDictIKType | ARCCore | ClassMember | Same as -AllIPDerivedTypesDict- except that value is -IKType-, not string. |
| ARCCore.PKRelAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.P | ARCCore | Class | 'Dummy'-class, not necessarily in use. See -PP- for more information. Created because of the concept of CorrespondingClass which is strictly enforced |
| ARCCore.PKRelAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.P.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCCore.PKRelAttribute.ForeignEntity | ARCCore | ClassMember | See -ForeignEntity-. |
| ARCCore.P.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.PKRelAttribute.OppositeTerm | ARCCore | ClassMember | See -OppositeTerm-. |
| ARCCore.PExact<TEnumType>..ctor | ARCCore | ClassMember | Set capacity to the number of members in the -PropertyKeyEnum- for this class (minus the __invalid-value) |
| ARCCore.PKTypeAttribute.Cardinality | ARCCore | ClassMember | See -Cardinality-. |
| ARCCore.PExact<TEnumType>.Storage | ARCCore | ClassMember | Uses int-value of -__enum- minus 1 as index. |
| ARCCore.PKTypeAttribute.DefaultValue | ARCCore | ClassMember | See -DefaultValue-. |
| ARCCore.PII | ARCCore | Class | PII = property for storing individual items. |
| ARCCore.PKTypeAttribute.IsObligatory | ARCCore | ClassMember | See -IsObligatory-. |
| ARCCore.PII.TryGetV | ARCCore | ClassMember | Since value is stored in keys, we need to override this method. |
| ARCCore.PKTypeAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.PII.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCCore.IP | ARCCore | Class | IP = IProperty. |
| ARCCore.PII.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.IP.TryGetV Overload2 | ARCCore | ClassMember | The actual value of the property. Mostly relevant for single-value properties like -PValue-. |
| ARCCore.IPII | ARCCore | Class | Future expansion, using different classes for storing, not only -PII-. |
| ARCCore.IP.Inc | ARCCore | ClassMember | Increments given property key by 1. Sets to 1 if not found. Uses long, not integer. |
| ARCCore.IIKII | ARCCore | Class | Related to -PII-, property for storing individual items |
| ARCCore.IP.Dec | ARCCore | ClassMember | Decrements given property key by 1. Sets to -1 if not found. Uses long, not integer. |
| ARCCore.IIKII.PackParseResultForStorageInIKII | ARCCore | ClassMember | This method corresponds to -PackParseResultForStorageInEntityObject-. |
| ARCCore.IP.Log | ARCCore | ClassMember | The 'final' overload of -Log- that is called by the other overloads. |
| ARCCore.IIKII.PackObjectForStorageInIKII | ARCCore | ClassMember | This method corresponds to -PackObjectForStorageInEntityObject-. |
| ARCCore.IP.LogExecuteTime | ARCCore | ClassMember | Times the execution of the given function and logs details about elapsed time. |
| ARCCore.PReadOnly | ARCCore | Class | Experimental (from Feb 2022) class suitable for classes that do not need to be deserialized, or to accept write requests through -PropertyAccess-. |
| ARCCore.IP.HandleException | ARCCore | ClassMember | Note that most relevant to use for -PConcurrent-. |
| ARCCore.PRich | ARCCore | Class | Fully flexible storage. Can store anything. Typical inherited for entity representations like 'Customer' or 'Order'. |
| ARCCore.IP.TryParseDtr | ARCCore | ClassMember | Parses a PropertyStreamLine- beginning with -dtr-. |
| ARCCore.PRich.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCCore.IP.Initialize | ARCCore | ClassMember | Note that has a default implementation (doing nothing). |
| ARCCore.PRich.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.IP.AssertIntegrity | ARCCore | ClassMember | See -TryAssertIntegrity-. |
| ARCCore.PRich.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.IP.TryAssertIntegrity | ARCCore | ClassMember | Asserts the integrity of this entity. |
| ARCCore.PValue<T> | ARCCore | Class | Single value storage. |
| ARCCore.IP.ToString | ARCCore | ClassMember | The ToString()-implementation in the classes implementing this interface is supposed to give a short concise representation of the object for debugging and logging purposes, that is, intended for human consumption. The most 'important' implementation is probably the one in -PRich- (-ToString-) because that one is often the basis for your entity classes like 'Customer', 'Order' and so on |
| ARCCore.PValue<T>.TrySetP | ARCCore | ClassMember | NOTE: -TryStore- is explicit aware that -PValue- and -PValueEmpty- |
| ARCCore.IP.TryGetPV | ARCCore | ClassMember | Gets a single property's value for the given property key. |
| ARCCore.PValue<T>.TryGetV | ARCCore | ClassMember | Supports duck typing. |
| ARCCore.IP.IsValid | ARCCore | ClassMember | Note that by default all properties are 'valid' but because of -NoRealDeletion-, we must have a mechanism for invalidating properties. This property returns FALSE if property has been invalidated and timestamp for invalidation is not '0001-01-01'. |
| ARCCore.PValue<T>.ConvertObjectToString | ARCCore | ClassMember | Converts object to string. |
| ARCCore.IP.Item | ARCCore | ClassMember | Offers string-based direct indexing. |
| ARCCore.PValue<T>.ToString | ARCCore | ClassMember | Do no cache this value, because memory consumption would then increase significantly in your applicationj |
| ARCCore.IP.Keys | ARCCore | ClassMember | Returns all the keys for this instance. |
| ARCCore.PValue<T>.DeepCopy | ARCCore | ClassMember | Note that if the generic type (T) is not immutable, then what we return will not be a truly deep copy. |
| ARCCore.IP.Values | ARCCore | ClassMember | Returns all the values (all the properties) for this instance. |
| ARCCore.PValue<T>..ctor | ARCCore | ClassMember | Note how this class does not have a parameter-less constructor (unlike all other -IP--derived classes in AgoRapide) |
| ARCCore.IP.Logger | ARCCore | ClassMember | Describes a logger. |
| ARCCore.PValueEmpty | ARCCore | Class | Represents the 'no value'. |
| ARCCore.IP.AllIPDerivedTypes | ARCCore | ClassMember | All relevant -IP--derived types for the whole application. |
| ARCCore.PValueEmpty.TrySetP | ARCCore | ClassMember | NOTE: -TryStore- is explicit aware that -PValue- and -PValueEmpty- |
| ARCCore.IP.AllIPDerivedTypesWithPKEnum | ARCCore | ClassMember | All relevant -IP--derived types for the whole application for which the also is defined a -PropertyKeyEnum-. |
| ARCCore.ClientUpdatePosition.OnlyNewDataIsRequested | ARCCore | ClassMember | Used by the subscribing client to signify that it does not care about historical data, the server may start with sending only new data. |
| ARCCore.P.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.ClientUpdatePosition.IsGoBack | ARCCore | ClassMember | Has to be translated by -StreamProcessor- into a concrete filename / index. |
| ARCCore.ICreated | ARCCore | Class | A dummy interface signifying that implementing class has the ability to store (in-memory) metadata -Created- |
| ARCCore.ClientUpdatePosition.IsAtEndOfStream | ARCCore | ClassMember | Necessary in order to implement -AdHocQuery-. |
| ARCCore.PCollection | ARCCore | Class | A class useful for storing a collection of entities (a table in RDBMS-terms) because it implements -Indexing-. |
| ARCCore.ClientUpdatePosition.ClientDatastoreIsEmptyInstance | ARCCore | ClassMember | See also -ClientDatastoreIsEmpty. |
| ARCCore.PCollection.TrySetPP | ARCCore | ClassMember | Replaces default interface method -TrySetPP-. |
| ARCCore.ClientUpdatePosition.OnlyNewDataIsRequestedInstance | ARCCore | ClassMember | See also -OnlyNewDataIsRequested. |
| ARCCore.PCollection.GetKeysEqualToValue | ARCCore | ClassMember | Returns properties which themselves again have key and value equal to the given key and value. |
| ARCCore.ConnectionInstruction | ARCCore | Class | The instruction about what connections to make (host, portnr, data transfer direction and so on). |
| ARCCore.PCollection.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCCore.ConnectionInstruction.Initialize | ARCCore | ClassMember | Initializes to sane values. |
| ARCCore.PCollection.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.ConnectionInstruction.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCCore.PCollection.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.ConnectionInstruction.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.IGetKeysEqualToValue | ARCCore | Class | Interface stating that implementing class does not use the default implementation of -GetKeysEqualToValue- (which does not use -Indexing-) but has replaced it with a more efficient implementation assumed to utilize -Indexing-. |
| ARCCore.ConnectionInstruction.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.PConcurrent | ARCCore | Class | A (somewhat) thread-safe alternative to -PRich- which also supports -ExposingApplicationState- (through -Logger-). |
| ARCCore.Sharding | ARCCore | Class | Enables load-balancing by describing what data should be sent over a given connection. |
| ARCCore.PConcurrent.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.PropertyStreamLine | ARCCore | Class | Has two main functions: |
| ARCCore.PExact<TEnumType> | ARCCore | Class | Very -MemoryConsumption- efficient alternative to -PRich-. |
| ARCCore.PropertyStreamLine.EncodeKeys | ARCCore | ClassMember | Encodes the key part of a -PropertyStreamLine-. |
| ARCCore.PExact<TEnumType>.SetPVDirect | ARCCore | ClassMember | High performance alternative to -TrySetP-, accessing -Storage- more direct. |
| ARCCore.PropertyStreamLine.EncodeValues | ARCCore | ClassMember | Typically used when turning -WholeCollection- into a value part of a -PropertyStreamLine-. |
| ARCCore.PExact<TEnumType>.GetPVDirect | ARCCore | ClassMember | High performance alternative to -TryGetP-, accessing -Storage- more direct. |
| ARCCore.PropertyStreamLine.EncodeKeyPart | ARCCore | ClassMember | Converts a single key part of a -PropertyStreamLine- to a format suitable for sending over a -PropertyStream-. |
| ARCCore.PExact<TEnumType>.TryGetPVDirect | ARCCore | ClassMember | High performance alternative to -TryGetP-, accessing -Storage- more direct. |
| ARCCore.PropertyStreamLine.EncodeValuePart | ARCCore | ClassMember | Converts a single value part of a -PropertyStreamLine- to a format suitable for sending over a -PropertyStream-. |
| ARCCore.PExact<TEnumType>.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.StorageFile.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCCore.PValueEmpty.ToPropertyStream | ARCCore | ClassMember | Typicall return value could be something like |
| ARCCore.StorageFile.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.ActualConnection | ARCCore | Class | The actual connection, its internal state, queue for sending and so on. |
| ARCCore.StorageFile.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.ActualConnection.SetMyUpdatePositionGenerator | ARCCore | ClassMember | Set by -StreamProcessor-. |
| ARCCore.Subscription | ARCCore | Class | A stream -Subscription- is the concept of how nodes (see -ARNodeType-) subscribe to the -PropertyStream- (either the whole stream or just part of it) in a distributed manner. |
| ARCCore.ActualConnection.SetSinglePropertyStreamReceiver | ARCCore | ClassMember | Set by -StreamProcessor-. |
| ARCCore.Subscription.FromTime | ARCCore | ClassMember | TODO: Implement concept of specifying starting-point in TIME (often for an -AdHocQuery-?). |
| ARCCore.ActualConnection.SetUpToDatePositionGenerator | ARCCore | ClassMember | Set by -StreamProcessor-. Not used by -Client-. |
| ARCCore.Subscription.ToTime | ARCCore | ClassMember | TODO: Implement concept of specifying ending-point in TIME (often for an -AdHocQuery-?). |
| ARCCore.ActualConnection.InitializeOutgoingConnection | ARCCore | ClassMember | Relevant for -Outgoing-. |
| ARCCore.Subscription.IsMatch Overload1 | ARCCore | ClassMember | Evaluates a query consisting of multiple instances of -Subscription- against a single property stream line. |
| ARCCore.ActualConnection.Communicate | ARCCore | ClassMember | Common for both -Incoming- and -Outgoing-. |
| ARCCore.Subscription.IsMatch Overload2 | ARCCore | ClassMember | Evaluates this instance of -Subscription- against a single property stream line (which has been split up into its constituent elements). |
| ARCCore.ActualConnection.LogAndSendErrorConditionData | ARCCore | ClassMember | Called when a serious error condition has been discovered and connection should be terminated. |
| ARCCore.Subscription.SyntaxHelp | ARCCore | ClassMember | '+*' Subscribe to everything in database. |
| ARCCore.ActualConnection.Send | ARCCore | ClassMember | Sends all messages in queue. |
| ARCCore.Subscription.IsAdd | ARCCore | ClassMember | Corresponds to whether value starts with a plus sign, '+' or not. |
| ARCCore.ActualConnection.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.Subscription.IsRemove | ARCCore | ClassMember | Corresponds to whether value starts with a minus sign, '+' or not. |
| ARCCore.ActualConnection..ctor | ARCCore | ClassMember | Note parameter-less constructor as desired for all classes inheriting -IP-. |
| ARCCore.UtilCore | ARCCore | Class | Utility methods for -ARCCore-. |
| ARCCore.MonkeyWrench | ARCCore | Class | Describes level of 'spanner-throwing' this connection shall contibute with |
| ARCCore.UtilCore.AssertCurrentlyStartingUp | ARCCore | ClassMember | Normally called from non-thread safe methods that should be run single-threaded at application startup only. |
| ARCCore.ClientUpdatePosition | ARCCore | Class | Describes from WHERE (from WHEN) in the historic -PropertyStream- new data is to be returned. |
| ARCCore.UtilCore.DoubleTryParse | ARCCore | ClassMember | Note that treats ',' (comma) as decimal point (not as thousands separator). |
| ARCCore.ClientUpdatePosition.Filename | ARCCore | ClassMember | Filename like '2020-04-03 08:42:22_R001' |
| ARCCore.UtilCore.EnumTryParse | ARCCore | ClassMember | Same as the inbuilt .NET method -TryParse- but with some additional checks. |
| ARCCore.ClientUpdatePosition.Index | ARCCore | ClassMember | Index (zero-based) into file. Value of -1 means blank update status / no data received at all (or no data received for this specific filename) |
| ARCCore.UtilCore.TryGetTypeFromStringNoCache | ARCCore | ClassMember | See -TryGetTypeFromStringFromCache- for documentation. |
| ARCCore.ClientUpdatePosition.ClientDatastoreIsEmpty | ARCCore | ClassMember | Used by the subscribing client to signify that it has no data stored locally, and it therefore needs an update from the beginning of the -PropertyStream-, that is, 'from the beginning of time'. |
| ARCCore.REx.Dec | ARCCore | ClassMember | This method should be called from inside a 'finally' block, in order to secure its execution, if not then your static recursion depth counter could slowly increase over time due to exceptions ocurring after call to -Inc- but before call to -Dec-. |
| ARCCore.PropertyStreamLine.Decode | ARCCore | ClassMember | Decodes string as encoded by -EncodeKeyPart- or -EncodeValuePart-. |
| ARCCore.InvalidTypeException | ARCCore | Class | |
| ARCCore.PropertyStreamLine.TryParseDirectToIP | ARCCore | ClassMember | Parses a series of -PropertyStreamLine- directly to the given type of -IP-. |
| ARCCore.InvalidTypeException.AssertAssignable | ARCCore | ClassMember | Asserts that expectedType.IsAssignableFrom(foundType) |
| ARCCore.PropertyStreamLine.TryParseDirectToProperty | ARCCore | ClassMember | Parses direct to a given property value. |
| ARCCore.InvalidTypeException.AssertEquals | ARCCore | ClassMember | Asserts that expectedType.Equals(foundType) |
| ARCCore.PropertyStreamLine.ParseAndStore | ARCCore | ClassMember | Note that throws exception if -TryParseAndStore- fails. |
| ARCCore.TValue | ARCCore | Class | Placeholder for any class type suitable as generic type parameter -PValue-. |
| ARCCore.PropertyStreamLine.ParseAndStoreFailSafe | ARCCore | ClassMember | If either parsing or storing fails then this method will call -StoreFailure- in order to keep some track of why parsing or storing failed. |
| ARCCore.TIP | ARCCore | Class | Placeholder for any class type suitable as generic type parameter restricted to -IP. |
| ARCCore.PropertyStreamLine.StoreFailSafe | ARCCore | ClassMember | Stores if possible and fails silently. |
| ARCCore.TIP.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCCore.PropertyStreamLine.StoreFailure | ARCCore | ClassMember | Stores a 'ParseOrStoreFailure'-object. |
| ARCCore.TIP.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.PropertyStreamLine.TryStore | ARCCore | ClassMember | Stores the given -PropertyStreamLineParsed- in the given storage object. |
| ARCCore.TIP.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.PropertyStreamLine.AllowedKeyChars | ARCCore | ClassMember | Allowed characters in the Key-part of a -PropertyStreamLine-. |
| ARCCore.BaseAttribute+IncorrectAttributeTypeUsedException | ARCCore | Class | Helps to clean up any confusion about which -BaseAttribute- to use in a given concept. |
| ARCCore.PropertyStreamLine.AllowedValueChars | ARCCore | ClassMember | Allowed characters in the Value-part of a -PropertyStreamLine-. |
| ARCCore.PK+BasePKAttributeNotFoundException<T> | ARCCore | Class | Explains how to implement a given -BasePKAttribute- for an enum |
| ARCCore.PropertyStreamLineParsed | ARCCore | Class | Parses the keys part of a line from -PropertyStream-, like 'Customer/42/FirstName = John. |
| ARCCore.PK+PKBoolPair | ARCCore | Class | Used to signify that a given -PK- returned from value factory inside -FromEnum- has not been initialized (has not yet been populated with -PKTypeAttribute- collection). |
| ARCCore.PropertyStreamLineParsed.ToString | ARCCore | ClassMember | Note relatively complex operation of 'restoring' original property stream line. |
| ARCCore.PK+PKBoolPair.TrulyInitialized | ARCCore | ClassMember | Not used currently (May 2020). Useful for debugging purposes |
| ARCCore.PropertyStreamLineParsed.TryParse | ARCCore | ClassMember | Generate list of <(IK key, Type valueType)> together with value from value part. |
| ARCCore.StreamProcessor+StorageFile | ARCCore | Class | |
| ARCCore.PropertyStreamLineParsed.IsComment | ARCCore | ClassMember | Signifies that property stream line given for parsing started with '//' (two forward slashes). |
| ARCCore.StreamProcessor+StorageFile.Filepath | ARCCore | ClassMember | Complete path to file |
| ARCCore.PropertyStreamLineParsed.Keys | ARCCore | ClassMember | The keys part of the -PropertyStreamLine-, that is, everything before ' = '. |
| ARCCore.StreamProcessor+StorageFile.Filename | ARCCore | ClassMember | Filename: Main file name, like 2020-04-03 08:42 |
| ARCCore.PropertyStreamLineParsed.Value | ARCCore | ClassMember | The original (non-parsed, non-validated)) value part of the -PropertyStreamLine-, that is, everything after ' = '. |
| ARCCore.ClassMemberAttributeP.DeclaringType | ARCCore | EnumMember | The actual MemberInfo.DeclaringType. |
| ARCCore.StreamProcessor | ARCCore | Class | Implements the storage mechanism for AgoRapide. |
| ARCCore.ClassMemberAttributeP.MethodName | ARCCore | EnumMember | The actual MemberInfo.Name. |
| ARCCore.StreamProcessor.CreateBareBonesInstance | ARCCore | ClassMember | Creates a bare-bones -StreamProcessor- instance. |
| ARCCore.ClassMemberAttributeP.MethodSignature | ARCCore | EnumMember | The actual MemberInfo.ToString. |
| ARCCore.StreamProcessor.Initialize | ARCCore | ClassMember | Initializes this instance of -StreamProcessor- |
| ARCCore.EnumAttributeP | ARCCore | Enum | Describes class -EnumAttribute-. |
| ARCCore.StreamProcessor.AddOrRemoveOutgoingConnections | ARCCore | ClassMember | Not relevant for -CoreDB-. |
| ARCCore.EnumAttributeP.AssemblyName | ARCCore | EnumMember | The assembly in which this class resides. |
| ARCCore.StreamProcessor.StartTCPIPCommunication | ARCCore | ClassMember | Starts communicating over TCP/IP. |
| ARCCore.EnumAttributeP.EnumNamespace | ARCCore | EnumMember | The namespace for -EnumType-. |
| ARCCore.StreamProcessor.ReceiveAndDistribute | ARCCore | ClassMember | Process all messages in receive queue. |
| ARCCore.EnumAttributeP.EnumType | ARCCore | EnumMember | The type of the enum (like type of 'CustomerP' in CustomerP.FirstName) that we are an attribute for |
| ARCCore.StreamProcessor.AddTimestampAsRequired | ARCCore | ClassMember | Adds -Timestamp- to the property stream (to -_queueReceive-) as specified by -TimestampResolution-. |
| ARCCore.EnumAttributeP.AREnumType | ARCCore | EnumMember | Note that will default to -__invalid- if not explicit set. |
| ARCCore.StreamProcessor.ReadStorageFile | ARCCore | ClassMember | Reads one storage file from disk |
| ARCCore.EnumAttributeP.CorrespondingClass | ARCCore | EnumMember | Only relevant when -PropertyKeyEnum-. |
| ARCCore.StreamProcessor.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.EnumMemberAttributeP | ARCCore | Enum | Describes class -EnumMemberAttribute-. |
| ARCCore.StreamProcessor.OutsideLocalReceiver | ARCCore | ClassMember | The outside (in the sense outside of this class) local mechanism which receives all -PropertyStreamLine- registered by this class. |
| ARCCore.EnumMemberAttributeP.EnumType | ARCCore | EnumMember | The type of the enum (like type of 'CustomerP' in CustomerP.FirstName) that we are an attribute for |
| ARCCore.PropertyStreamLineWithOrigin | ARCCore | Class | The rationale for this class is that -ReceiveAndDistribute- needs to distingush origin of data when routing it (in general, in order to avoid sending it back to its source). |
| ARCCore.EnumMemberAttributeP.EnumMember | ARCCore | EnumMember | The actual enum member / enum value (like 'Firstname' in CustomerP.FirstName) that we are an attribute for |
| ARCCore.PropertyStreamLineWithOrigin.HasLocalOrigin | ARCCore | ClassMember | Locally generated data is not to be sent to -OutsideLocalReceiver-). We instead leave it to the 'outside' to decide if |
| ARCCore.ARComponents | ARCCore | Enum | ARComponents = AgoRapide Components. Contains short descriptions of the different 'official' AgoRapide components. |
| ARCCore.PropertyStreamLineWithOrigin.SendToLocalReceiver | ARCCore | ClassMember | Means 'send to local receiver regardless of origin'. |
| ARCCore.ARComponents.ARCCore | ARCCore | EnumMember | A necessary library (.DLL in Windows terms) that every -ARNodeType- should link to. |
| ARCCore.PropertyStreamLineWithOrigin.DoNotAddTimestamp | ARCCore | ClassMember | Normally -StreamProcessor- inserts the required -Timestamp-s in the AgoRapide storage. |
| ARCCore.ARComponents.ARADB | ARCCore | EnumMember | An application constituting the full functionality of a -CoreDB- (linking to -ARCCore-). |
| ARCCore.PropertyStreamLineWithOrigin.ReceivedFromOutgoing | ARCCore | ClassMember | Data received from an outgoing connection, that is, data received based on 'this' application's subscription request (as subscribing client). |
| ARCCore.ARComponents.ARAClient | ARCCore | EnumMember | A template application for a -Client- (linking to -ARCCore-). |
| ARCCore.StorageFile | ARCCore | Class | Implemented only in order to store some ideas about -Hash-. |
| ARCCore.ARConcepts.PropertyAccess | ARCCore | EnumMember | The general mechanism for accessing properties of objects in AgoRapide. |
| ARCCore.UtilCore.TryGetTypeFromStringFromCache | ARCCore | ClassMember | Corresponding method for creating string-representation of type is -ToStringDB-. |
| ARCCore.ARConcepts.AvoidingRepetition | ARCCore | EnumMember | Avoiding repetition, the overarching philosophy that inspired the rest of AgoRapide. |
| ARCCore.UtilCore.GetExceptionChainAsString | ARCCore | ClassMember | Follows the chain of InnerException and returns types as comma-separated string |
| ARCCore.ARConcepts.AgoRapideHistory | ARCCore | EnumMember | AgoRapide has roots back to 2011 when Bjørn Erling Fløtten invented panSL (SL = Schema language). |
| ARCCore.UtilCore.GetExeptionDetails | ARCCore | ClassMember | Gives as much information about exception as possible. |
| ARCCore.ARConcepts.AdHocQuery | ARCCore | EnumMember | The concept of a -Client- doing an ad-hoc query against (normally) a -ArmDB-. |
| ARCCore.UtilCore.DateTimeTryParse | ARCCore | ClassMember | Accepts on of the formats specified in -ValidDateTimeFormats-. |
| ARCCore.ARConcepts.StandardAgoRapideCode | ARCCore | EnumMember | Code originating from the main official AgoRapide distribution (which therefore does not include any end-application specific code) |
| ARCCore.UtilCore.TimeSpanTryParse | ARCCore | ClassMember | Accepts on of the formats specified in -ValidDateTimeFormats-. |
| ARCCore.ARConcepts.ApplicationSpecificCode | ARCCore | EnumMember | Code specific for an end-application. |
| ARCCore.UtilCore.UseLocalTimeInsteadOfUTC | ARCCore | ClassMember | By default AgoRapide operates only with UTC time. |
| ARCCore.ARConcepts.MemoryConsumption | ARCCore | EnumMember | A naïve implementation of key-value storages like AgoRapide may lead to excessive memory (RAM) consumption. |
| ARCCore.UtilCore.DateTimeNow | ARCCore | ClassMember | Returns DateTime.UtcNow unless -UseLocalTimeInsteadOfUTC- has been set to TRUE in which case DateTime.Now is returned. |
| ARCCore.ARConcepts.Indexing | ARCCore | EnumMember | In-memory indexing of data is done 'behind-the-scenes' by some classes implementing -IP-. |
| ARCCore.UtilCore.CurrentlyStartingUp | ARCCore | ClassMember | Called once at application startup after all Attribute instances in the C# code has been processed. |
| ARCCore.ARConcepts.CoreDBSynchronization | ARCCore | EnumMember | The concept of how multiple -CoreDB- instances synchronizes their data. |
| ARCCore.UtilCore.Assemblies | ARCCore | ClassMember | All relevant assemblies for application. |
| ARCCore.ARConcepts.SingleThreadedCode | ARCCore | EnumMember | Some practical choices have been made in AgoRapide which requires object access to be done in a single-threaded manner, or within a locking context (using for instance -ReaderWriterLockSlim-). |
| ARCCore.UtilCore.Culture | ARCCore | ClassMember | The general culture used for parsing. |
| ARCCore.ARConcepts.DataRetention | ARCCore | EnumMember | The concept of when to delete old data (if deemed necessary). |
| ARCCore.UtilCore.Culture_en_US | ARCCore | ClassMember | Used by -DoubleTryParse-. |
| ARCCore.ARConcepts.NoRealDeletion | ARCCore | EnumMember | AgoRapide has no real concept for deletion of data (apart from -DataRetention-, which is mostly relevant for 'old' data). |
| ARCCore.UtilCore.DefaultAgoRapideEncoding | ARCCore | ClassMember | The standard encoding used for text (UTF8). |
| ARCCore.ARConcepts.ManyToManyRelations | ARCCore | EnumMember | -ARCQuery- supports many-to-many relations in a simple manner without introducing a third entity type (a third table). |
| ARCCore.UtilCore.ValidDateTimeFormats | ARCCore | ClassMember | 'yyyy-MM-dd HH:mm:ss.fff', 'yyyy-MM-dd HH:mm:ss', 'yyyy-MM-dd HH:mm', 'yyyy-MM-dd' |
| ARCCore.ARConcepts.Documentation | ARCCore | EnumMember | Thanks to the tagging of enums and classes in AgoRapide (like this description), automatically generation of documentation is possible. |
| ARCCore.UtilCore.ValidTimeSpanFormats | ARCCore | ClassMember | 'hh\:mm', 'hh\:mm\:ss', 'd\.hh\:mm\:ss', 'hh\:mm\:ss\.fff' // Milliseconds,'d\.hh\:mm\:ss\.fff' |
| ARCCore.ARConcepts.AssertionsAndDetailedExceptionMessages | ARCCore | EnumMember | The abstraction level in AgoRapide is very high. |
| ARCCore.REx | ARCCore | Class | REx = 'TooDeepRecursiveDepthException' |
| ARCCore.ARConcepts.ExposingApplicationState | ARCCore | EnumMember | The traditional debugging process usually entails reading through logs and querying about your application state through a debugging tool. |
| ARCCore.REx.Inc | ARCCore | ClassMember | Increases recursive count. |
| ARCCore.PSPrefix.dtr | ARCCore | EnumMember | Data, whole records. |
| ARCCore.StreamProcessor+StorageFile.Length | ARCCore | ClassMember | Wrongly placed. Belongs to each individual revision file. |
| ARCCore.PSPrefix.RS | ARCCore | EnumMember | RS = Registration Stream (see -RegStream-). |
| ARCCore.StreamProcessor+StorageFile.Properties | ARCCore | ClassMember | Key = revision number of file (due to compression / -DataRetention-), like R00001, R00002 and so on. |
| ARCCore.PSPrefix.ES | ARCCore | EnumMember | ES = Event Stream (see -EventStream-). |
| ARCCore.BaseAttributeP | ARCCore | Enum | Describes class -BaseAttribute-. |
| ARCCore.PSPrefix.cmd | ARCCore | EnumMember | Command. |
| ARCCore.BaseAttributeP.Description | ARCCore | EnumMember | The description for the attribute, like this description |
| ARCCore.PSPrefix.app | ARCCore | EnumMember | Application state, like app/ |
| ARCCore.BaseAttributeP.LongDescription | ARCCore | EnumMember | The long (detailed) description for the attribute. |
| ARCCore.PSPrefix.doc | ARCCore | EnumMember | Documentation. |
| ARCCore.ClassAttributeP | ARCCore | Enum | Describes class -ClassAttribute-. |
| ARCCore.PSPrefix.t | ARCCore | EnumMember | Translations. |
| ARCCore.ClassAttributeP.AssemblyName | ARCCore | EnumMember | The assembly in which this class resides. |
| ARCCore.PKHTMLAttributeP | ARCCore | Enum | Describes class -PKRelAttribute-. |
| ARCCore.ClassAttributeP.ClassNamespace | ARCCore | EnumMember | The namespace for -ClassType-. |
| ARCCore.PKHTMLAttributeP.Encoder | ARCCore | EnumMember | The class doing the HTML-encoding. |
| ARCCore.ClassAttributeP.ClassType | ARCCore | EnumMember | The actual type that we are a -ClassAttribute- for |
| ARCCore.PKLogAttributeP | ARCCore | Enum | Describes class -PKLogAttribute. |
| ARCCore.ClassAttributeP.BaseTypes | ARCCore | EnumMember | The inheritance hierarchy for this class, starting with base type (excluding 'object').r Not set if class does not inherit any class except 'object' |
| ARCCore.PKLogAttributeP.DoNotLogAtAll | ARCCore | EnumMember | Originates from -DoNotLogAtAll-. |
| ARCCore.ClassAttributeP.SubTypes | ARCCore | EnumMember | Direct and indirect sub types of this class. |
| ARCCore.PKLogAttributeP.CountInterval | ARCCore | EnumMember | For a value of n, log only every n'th time the property is changed. |
| ARCCore.ClassAttributeP.Interfaces | ARCCore | EnumMember | All interfaces that this class and its base classes implement |
| ARCCore.PKLogAttributeP.TimeInterval | ARCCore | EnumMember | Specifies a certain time interval for which the property's value shall be sent over the -PropertyStream-. |
| ARCCore.ClassAttributeP.InterfacesDirectlyImplemented | ARCCore | EnumMember | All interfaces that this class directly implements. |
| ARCCore.PKRelAttributeP | ARCCore | Enum | Describes class -PKRelAttribute-. |
| ARCCore.ClassAttributeP.CorrespondingEnumType | ARCCore | EnumMember | Only relevant when implements -IP-. |
| ARCCore.PKRelAttributeP.ForeignEntity | ARCCore | EnumMember | The type of foreign entity that this property points to. |
| ARCCore.ClassAttributeP.BoilerplateCodePropertiesAndStorage | ARCCore | EnumMember | Only relevant when implements -IP- and when a -CorrespondingEnumType- is found. |
| ARCCore.PKRelAttributeP.OppositeTerm | ARCCore | EnumMember | Example: For 'Employee', the key 'SupervisorId' where the supervisor is another 'Employee', will have another meaning "as seen from" the Supervisor, namely "Subordinates" or similar. |
| ARCCore.ClassMemberAttributeP | ARCCore | Enum | Describes class -ClassMemberAttribute-. |
| ARCCore.PKRelAttributeP.EnforceReferentialIntegrity | ARCCore | EnumMember | If TRUE then referential integrity will be enforced by -TryStore-. |
| ARCCore.ARComponents.ARCDoc | ARCCore | EnumMember | A library supporting documentation and demonstrating usage of AgoRapide. |
| ARCCore.PKTypeAttributeP | ARCCore | Enum | Describes class -PKTypeAttribute-. |
| ARCCore.ARComponents.ARCQuery | ARCCore | EnumMember | ARCQuery provides a query language that mimicks SQL but is usable through HTTP as GET URLs. |
| ARCCore.PKTypeAttributeP.Type | ARCCore | EnumMember | The type of this Property. |
| ARCCore.ARComponents.ARCEvent | ARCCore | EnumMember | ARCEvent contains an -EventSourcing- engine offering a unique -PropertyStream2D- concept where processes (of some business domain) can be expressed in very compact manner through the concept of -IRegHandler-. |
| ARCCore.PKTypeAttributeP.DefaultValue | ARCCore | EnumMember | The default value. |
| ARCCore.ARComponents.ARCSync | ARCCore | EnumMember | (Not implemented as of March 2020) |
| ARCCore.PKTypeAttributeP.Cardinality | ARCCore | EnumMember | Describes how multiple instances of a property is supposed to be handled. |
| ARCCore.ARComponents.ARCSec | ARCCore | EnumMember | (Not implemented as of March 2020) |
| ARCCore.PKTypeAttributeP.IsObligatory | ARCCore | EnumMember | True means value is obligatory. |
| ARCCore.ARComponents.ARCAPI | ARCCore | EnumMember | A library providing an API on top of the -PropertyStream-. |
| ARCCore.PKTypeAttributeP.BoilerplateCodeProperties | ARCCore | EnumMember | Automatically generated boilerplate code that implements traditional setters and getters for this key. |
| ARCCore.ARComponents.ARAAPI | ARCCore | EnumMember | The corresponding template application for -ARCAPI- demonstrating its usage, providing an HTTP / HTTPS interface with the help of Microsoft.AspNetCore.Mvc. |
| ARCCore.PP | ARCCore | Enum | Describes meta data for any class (property) implementing -IP-. |
| ARCCore.ARConcepts | ARCCore | Enum | The overarching concepts upon which AgoRapide is built. |
| ARCCore.PP.Created | ARCCore | EnumMember | Timestamp when property was created in database. |
| ARCCore.ARConcepts.GettingStarted | ARCCore | EnumMember | AgoRapide 2020 is an open source library for building data-oriented backend applications using .NET. |
| ARCCore.PP.Cid | ARCCore | EnumMember | Creator id (entity which created this property). |
| ARCCore.ARConcepts.PropertyStream | ARCCore | EnumMember | AgoRapide, the 'streams-of-water' database". |
| ARCCore.PP.Value | ARCCore | EnumMember | The actual value. |
| ARCCore.ARConcepts.PropertyStream2D | ARCCore | EnumMember | PropertyStream2D is an expansion of the -PropertyStream- concept supported by the library -ARCEvent-. |
| ARCCore.PP.Valid | ARCCore | EnumMember | Timestamp when property was last known to be (still) valid |
| ARCCore.ARConcepts.EventSourcing | ARCCore | EnumMember | (related to -ARCEvent-). |
| ARCCore.PP.Vid | ARCCore | EnumMember | Validator id, that is entity which set -Valid- for this property. |
| ARCCore.ARConcepts.RegStream | ARCCore | EnumMember | The concept in -ARCEvent- of an "axis" (usefully referred to as the vertical axis) within the concept of -PropertyStream2D-. |
| ARCCore.PP.Invalid | ARCCore | EnumMember | Timestamp when property was invalidated / 'deleted'. |
| ARCCore.ARConcepts.EventStream | ARCCore | EnumMember | The concept in -ARCEvent- of an "axis" (usefully referred to as the horizontal axis) within the concept of -PropertyStream2D-. |
| ARCCore.PP.Iid | ARCCore | EnumMember | Invalidator id, that is entity which set -Invalid- for this property (or removed / 'undid' the invalidation by setting the value to '0001-01-01'). |
| ARCCore.ARConcepts.TransientEventTree | ARCCore | EnumMember | The concept in -ARCEvent- of how an -Event- in the -EventStream- generates transient events which in turn may generate |
| ARCCore.PP.ExceptionText | ARCCore | EnumMember | General property for logging of exceptions, usually set through -HandleException-. |
| ARCCore.ARConcepts.TaggingOfPropertyKeys | ARCCore | EnumMember | The concept of specifying in a single place all relevant information about a given property (data field). |
| ARCCore.StreamProcessorP.CurrentlyInitializing | ARCCore | EnumMember | Set to TRUE at initialization (signals for instance -ReceiveAndDistribute- that it can only queue messages, not process them). |
| ARCCore.ARConcepts.LinkInsertionInDocumentation | ARCCore | EnumMember | Documentation with links is much easier to read. |
| ARCCore.StreamProcessorP.ClientUpdatePositionPath | ARCCore | EnumMember | Complete path to file containing -ClientUpdatePosition-. |
| ARCCore.ARConcepts.TryPatternAndNull | ARCCore | EnumMember | AgoRapide uses non-nullable reference types as default throughout the system |
| ARCCore.StreamProcessorP.ClientUpdatePosition | ARCCore | EnumMember | Note how this is stored both as -ClientUpdatePosition- (on the client side) and -ClientUpdatePosition- (on the server side). |
| ARCCore.AREnumType | ARCCore | Enum | Categories different types of enum used in AgoRapide. The most important one is -PropertyKeyEnum-. |
| ARCCore.StreamProcessorP.IncomingConnectionsPortNo | ARCCore | EnumMember | If not set, then class will not listen for incoming connections (meaning that our application is probably a -Client-). |
| ARCCore.AREnumType.PropertyKeyEnum | ARCCore | EnumMember | Designates enums that describe relevant values for an 'entity' object like 'Customer'. |
| ARCCore.StreamProcessorP.UnderClosure | ARCCore | EnumMember | Set to TRUE if to be closed, whenever an exception occurs or when class goes out of scope |
| ARCCore.AREnumType.OrdinaryEnum | ARCCore | EnumMember | Designates "Ordinary" enums used for indicating range of valid values for a given key |
| ARCCore.StreamProcessorP.WriteToConsole | ARCCore | EnumMember | If true then incoming data (from other nodes will be written to console. |
| ARCCore.AREnumType.DocumentationOnlyEnum | ARCCore | EnumMember | Designates enums that provide a central repository of explanation of terms that are not present in the C# code. |
| ARCCore.StreamProcessorP.Timestamp | ARCCore | EnumMember | The timestamp inserted at regular intervals in the -PropertyStream- according to -TimestampResolution-. |
| ARCCore.ARNodeType | ARCCore | Enum | Describes what function a node in an AgoRapide system serves. A given node may constitute of only -StandardAgoRapideCode- or a combination of -StandardAgoRapideCode- and -ApplicationSpecificCode-. |
| ARCCore.StreamProcessorP.TimestampIsOld | ARCCore | EnumMember | A warning sent by -StreamProcessor- to -OutsideLocalReceiver- when it knows that data as served is out of date. |
| ARCCore.ARNodeType.CoreDB | ARCCore | EnumMember | A node containing the core or central database. |
| ARCCore.StreamProcessorP.TimestampResolution | ARCCore | EnumMember | The time interval between each timestamp update in the -PropertyStream-. |
| ARCCore.ARNodeType.ArmDB | ARCCore | EnumMember | A node with a 'client -Subscription-' towards -CoreDB- to a (usually) subset of the entire database (acting as a cache and filtering mechanism), or with a 'client -Subscription-' towards -CoreDB- to the whole database (acting as a cache mechanism only) |
| ARCCore.StreamProcessorP.DoNotStoreLocally | ARCCore | EnumMember | For -Client-, incoming data (as received from a -Outgoing-) is possible to store BOTH to disk, AND to (normally) a -PRich-. |
| ARCCore.ARNodeType.Client | ARCCore | EnumMember | An outer node / 'end' node with (usually) -ApplicationSpecificCode- but based on -ARADB-. |
| ARCCore.StreamProcessorP.DoNotStoreLocalOriginLocally | ARCCore | EnumMember | Means 'do not store local origin locally but wait until it gets confirmed by core storage'. |
| ARCCore.Cardinality | ARCCore | Enum | Describes how multiple instances of a property is supposed to be handled. |
| ARCCore.StreamProcessorP.CacheDiskWrites | ARCCore | EnumMember | If TRUE then will write the -PropertyStream- to disk in bigger chunks, thereby increasing performance. |
| ARCCore.Cardinality.HistoryOnly | ARCCore | EnumMember | The default value. |
| ARCCore.StreamProcessorP.CopyFileStructureFromCore | ARCCore | EnumMember | If TRUE, will copy the exact file structure (through information given in -ClientUpdatePosition-). |
| ARCCore.Cardinality.WholeCollection | ARCCore | EnumMember | Values are always set as a whole (there is no need or no meaning in setting or deleting individual items) |
| ARCCore.StreamProcessorP.CountIncomingConnections | ARCCore | EnumMember | |
| ARCCore.Cardinality.IndividualItems | ARCCore | EnumMember | Values are supposed to be set and 'deleted' individually. |
| ARCCore.StreamProcessorP.CountOutgoingConnections | ARCCore | EnumMember | |
| ARCCore.PSPrefix | ARCCore | Enum | Describes some recommended prefixes to use in a -PropertyStreamLine-. |
| ARCCore.StreamProcessorP.CountOutsideLocalReceiver | ARCCore | EnumMember | Count of calls to -OutsideLocalReceiver-. |
| ARCCore.PSPrefix.dt | ARCCore | EnumMember | Data, single key + value. |
| ARCCore.StreamProcessorP.CountReceiveLocalOrigin | ARCCore | EnumMember | Count of -PropertyStreamLine- with -HasLocalOrigin-. |
| ARCCore.PConcurrentP | ARCCore | Enum | Describes class -PConcurrent-. |
| ARCCore.StreamProcessorP.CountReceiveNonLocalOrigin | ARCCore | EnumMember | Count of -PropertyStreamLine- not with -HasLocalOrigin-. |
| ARCCore.PConcurrentP.Heartbeat | ARCCore | EnumMember | |
| ARCCore.StorageFileP | ARCCore | Enum | Describes class -StorageFile-. |
| ARCCore.ActualConnectionP | ARCCore | Enum | Describes class -ActualConnection-. |
| ARCCore.StorageFileP.Filename | ARCCore | EnumMember | |
| ARCCore.ActualConnectionP.Id | ARCCore | EnumMember | When connection is used with-StreamProcessor-, the Id should be the same as the key used in the incoming / outgoing connection dictionary collection. |
| ARCCore.StorageFileP.Hash | ARCCore | EnumMember | Hash of storage file. Not implemented as of Apr 2020. It is envisaged to store hash-value as last line in storage file. In this case the hash must be the hash of the file excluding the last line |
| ARCCore.ActualConnectionP.ConnectionInstruction | ARCCore | EnumMember | Only relevant when we are an -Outgoing-. |
| ARCCore.ConnectionDirection | ARCCore | Enum | The concept of who took the initiative for the connections (who asked to open the TCP/IP session). |
| ARCCore.ActualConnectionP.ConnectionDirection | ARCCore | EnumMember | |
| ARCCore.ConnectionDirection.Incoming | ARCCore | EnumMember | ConnectionInstruction will not be set for these. |
| ARCCore.ActualConnectionP.CountReceiveMessage | ARCCore | EnumMember | |
| ARCCore.ConnectionDirection.Outgoing | ARCCore | EnumMember | There would normally exist two live outgoing connection at a given point in time for -Client- / -ArmDB-: |
| ARCCore.ActualConnectionP.CountSendMessage | ARCCore | EnumMember | |
| ARCCore.DataTransferDirection | ARCCore | Enum | Direction for transfer of data. |
| ARCCore.ActualConnectionP.ClientUpdatePosition | ARCCore | EnumMember | Note how this is stored both as -ClientUpdatePosition- (on the client side) and -ClientUpdatePosition- (on the server side). |
| ARCCore.DataTransferDirection.Send | ARCCore | EnumMember | Like -Client- sending in-application generated properties to -ArmDB- / -CoreDB- or -ArmDB- sending data received over an incoming connection to -CoreDB-. |
| ARCCore.ActualConnectionP.SubscriptionAsRequestedByClient | ARCCore | EnumMember | Originates from -Subscription-. |
| ARCCore.DataTransferDirection.Receive | ARCCore | EnumMember | Like -Client- receiving data from an upstream -ArmDB- / -CoreDB- or -ArmDB- receiving data from an upstream -CoreDB-. |
| ARCCore.ActualConnectionP.ClosingReason | ARCCore | EnumMember | Reason why this connection was closed |
| ARCCore.TPropertyKeyEnum | ARCCore | Enum | Placeholder for any enum type suitable as generic type parameter for -PExact-. |
| ARCCore.ActualConnectionP.IsErrorCondition | ARCCore | EnumMember | Some kind of error condition has occured regarding data going back and forth, but the TCP/IP connection itself is probably sound. |
| Assembly ARCDoc | Assembly | A library supporting documentation and demonstrating usage of AgoRapide. | |
| ARCCore.ActualConnectionP.ErrorConditionData | ARCCore | EnumMember | Detailed explanation about -IsErrorCondition- |
| ARCDoc.Apple | ARCDoc | Class | The most 'standard' way of implementing an entity-class in AgoRapide, by just inheriting -PRich-. |
| ARCCore.ActualConnectionP.UnderClosure | ARCCore | EnumMember | Set to TRUE if to be closed and reinitialized. |
| ARCDoc.Apple.AddName | ARCDoc | ClassMember | Convenience method, not obligatory. |
| ARCCore.ActualConnectionP.MonkeyWrench | ARCCore | EnumMember | |
| ARCDoc.Apple.GetName | ARCDoc | ClassMember | Convenience method, not obligatory. |
| ARCCore.ActualConnectionP.PartnerIPAddress | ARCCore | EnumMember | TODO: Use more strongly typing for this. |
| ARCDoc.DocLink.LinkWordHTMLWithHyphens | ARCDoc | ClassMember | -LinkWordHTML- with '-' (minus sign / hyphen) prepended and appended. |
| ARCCore.ConnectionInstructionP | ARCCore | Enum | Describes class -ConnectionInstruction-. |
| ARCDoc.DocLink.LinkWordHTMLBeforeLt | ARCDoc | ClassMember | If -LinkWordHTML contains '<' (really '<') (for generic types, like 'PValue<TValue>') then this will contain the part before '<' like 'PValue'. |
| ARCCore.ConnectionInstructionP.ClientId | ARCCore | EnumMember | The AgoRapide node-id for which this connection is relevant. Used for distributing over the -PropertyStream- information to the clients about which possible nodes they can connect to. |
| ARCDoc.DocLink.LinkWordHTMLBeforeLtWithHyphens | ARCDoc | ClassMember | -LinkWordHTMLBeforeLt- with '-' (minus sign / hyphen) prepended and appended. |
| ARCCore.ConnectionInstructionP.ServerHostName | ARCCore | EnumMember | The host (DNS or IP-address) for which to connect. |
| ARCDoc.DocLink.AHrefEndPart | ARCDoc | ClassMember | 'Filename.Encoded + "> + LinkWordHTML + </a>' |
| ARCCore.ConnectionInstructionP.ServerPortNo | ARCCore | EnumMember | The port number for which to connect. |
| ARCDoc.DocLinkCollection | ARCDoc | Class | Contains a collection of -DocLink- objects. |
| ARCCore.ConnectionInstructionP.ConnectionId | ARCCore | EnumMember | Usually a combination of -ClientId-, -ServerHostName- and -ServerPortNo-. |
| ARCDoc.DocLinkCollection.Create | ARCDoc | ClassMember | Notes all locations and their positions in the hierarchical directory structure. |
| ARCCore.ConnectionInstructionP.DataTransferDirection | ARCCore | EnumMember | |
| ARCDoc.DocLinkCollection.InsertLinks Overload1 | ARCDoc | ClassMember | Does -LinkInsertionInDocumentation- on the given HTML content. |
| ARCCore.ConnectionInstructionP.Subscription | ARCCore | EnumMember | The actual subscripton. This is what the connecting party / (downstream) client would send over its TCP/IP connection to the (upstream) server. |
| ARCDoc.DocLinkCollection.InsertLinks Overload2 | ARCDoc | ClassMember | See overload with 'contentLocation' as parameter for documentation. |
| ARCCore.ConnectionInstructionP.MultipleConnectionUsage | ARCCore | EnumMember | |
| ARCDoc.DocLinkCollection.TryGetP | ARCDoc | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCCore.ConnectionInstructionP.Sharding | ARCCore | EnumMember | |
| ARCDoc.DocLinkCollection.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.MultipleConnectionUsage | ARCCore | Enum | Enables fault-tolerance by describing use of multiple connections |
| ARCDoc.DocLinkCollection.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.MultipleConnectionUsage.Admin | ARCCore | EnumMember | Connection is a special administrative connection to a central 'command-and-control' server which instructs which connections to make. |
| ARCDoc.DocLinkResolution | ARCDoc | Class | Contains a resolution page for a link word which has duplicate 'targets' (pointing to multiple -DocLink- instances). |
| ARCCore.MultipleConnectionUsage.RoundRobin | ARCCore | EnumMember | This connection to be used in a turn based system, together with other connections with -RoundRobin-. |
| ARCDoc.DocLinkResolution.ToHTMLSimpleSingle | ARCDoc | ClassMember | Gives a friendly description about possible targets for LinkWord-. |
| ARCCore.MultipleConnectionUsage.Simultaneous | ARCCore | EnumMember | This connection to be used simultaneously with other connections with -Simultaneous- |
| ARCDoc.DocLinkResolution.TryGetP | ARCDoc | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCCore.StreamProcessorP | ARCCore | Enum | Describes class -StreamProcessor-. |
| ARCDoc.DocLinkResolution.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.StreamProcessorP.LocalStorageFolder | ARCCore | EnumMember | The local path to which new properties are stored. Should NOT end with any trailing DirectorySeparatorChar |
| ARCDoc.DocLinkResolution.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.StreamProcessorP.IndividualStorageFileSize | ARCCore | EnumMember | Max size (in bytes) for a single storage file before a new file is created by call to -StreamProcessor.CreateNewStorageFile-. |
| ARCDoc.DocLinkResolutionCollection | ARCDoc | Class | Contains a collection of -DocLinkResolution- objects. |
| ARCDoc.Apple.TryGetName | ARCDoc | ClassMember | Convenience method, not obligatory. |
| ARCDoc.DocLinkResolutionCollection.TryGetP | ARCDoc | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCDoc.Apple.TryGetP | ARCDoc | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCDoc.DocLinkResolutionCollection.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCDoc.Apple.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCDoc.DocLinkResolutionCollection.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.Apple.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.Documentator | ARCDoc | Class | General class for documenting AgoRapide and also your own -ApplicationSpecificCode-. |
| ARCDoc.Apple.Name | ARCDoc | ClassMember | Convenience method, not obligatory. |
| ARCDoc.Documentator.CreateAndInsert | ARCDoc | ClassMember | Creates an instance of -Documentator- with a natural hierarchical representation of documentation attributes found in the given assemblies. |
| ARCDoc.Banana | ARCDoc | Class | Implements -IP- directly and uses traditional property storage for optimum -MemoryConsumption- efficiency. |
| ARCDoc.Documentator.ToHTMLSimpleSingle | ARCDoc | ClassMember | Alternative ('override') to -ToHTMLSimpleSingle-. |
| ARCDoc.Banana.Name | ARCDoc | ClassMember | Annotated as nullable in order to keep flexibility of -PropertyAccess-, including what happens if values are not set (TryGetP etc) |
| ARCDoc.Documentator.CreateHTOCStandard | ARCDoc | ClassMember | Creates a 'standard' table of contents, structured by assembly and each assembly divided into 'Class' and 'Enum'. |
| ARCDoc.Banana.Colour | ARCDoc | ClassMember | Annotated as nullable in order to keep flexibility of -PropertyAccess-, including what happens if values are not set (TryGetP etc) |
| ARCDoc.Documentator.CreateHTOCNamespace | ARCDoc | ClassMember | Creates a table of contents structured by namespace |
| ARCDoc.Demonstrator | ARCDoc | Class | Demonstrates various concepts from -ARCCore-, especially -PropertyAccess-. |
| ARCDoc.Documentator.CreateHTOCInheritance | ARCDoc | ClassMember | Creates a table of contents structured by inheritance (classes and interfaces only, not members). |
| ARCDoc.Demonstrator.DemonstratePropertyAccessApple | ARCDoc | ClassMember | Demonstrates use of -PropertyAccess- through the -Apple- class. |
| ARCDoc.Documentator.TryGetP | ARCDoc | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCDoc.Demonstrator.DemonstratePropertyAccessOrange | ARCDoc | ClassMember | Demonstrates use of -PropertyAccess- through the -Orange- class. |
| ARCDoc.Documentator.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCDoc.Demonstrator.DemonstratePropertyAccessBanana | ARCDoc | ClassMember | Demonstrates use of -PropertyAccess- through the -Banana- class. |
| ARCDoc.Documentator.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.Demonstrator.DemonstrateITypeDescriber | ARCDoc | ClassMember | Demonstrates use of -ITypeDescriber- for describing single-property values. |
| ARCDoc.Documentator.DocLinks | ARCDoc | ClassMember | Set by -CreateAndInsert-. |
| ARCDoc.Demonstrator.DemonstratePRichHierarchicalStorage | ARCDoc | ClassMember | Demonstrates use of -PRich-, how it receives -PropertyStream--lines and builds up a strongly typed hierarchical object storage. |
| ARCDoc.Documentator.DocLinkResolutionLocation | ARCDoc | ClassMember | Default position within the global storage context of doc link resolution pages. |
| ARCDoc.Demonstrator.DemonstratePropertyStream | ARCDoc | ClassMember | Demonstrates use of -PropertyStream- by generating local data (documentation data) and writing locally to console. |
| ARCDoc.DummyEnum | ARCDoc | Class | TODO: Document better what this is for (and change name) |
| ARCDoc.Demonstrator.DemonstrateBareBonesClient | ARCDoc | ClassMember | Demonstrates adding -PropertyStream--lines to -CoreDB- without using ANY AgoRapide component, only standard TCP/IP functionality in .NET. |
| ARCDoc.PKDocAttribute | ARCDoc | Class | Describes documentation and presentation of a property. |
| ARCDoc.Demonstrator.DemonstrateLogConsole | ARCDoc | ClassMember | Demonstrates a quite simple log console. |
| ARCDoc.PKDocAttribute.Initialize | ARCDoc | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCDoc.Demonstrator.DemonstrateStreamProcessorAsClient | ARCDoc | ClassMember | Demonstrates use of -StreamProcessor- as a general client. |
| ARCDoc.PKDocAttribute.TryRemoveP | ARCDoc | ClassMember | Should probably never be used. |
| ARCDoc.Orange | ARCDoc | Class | Inherits -PExact- for probably the best compromise between memory consumption and easy of development. |
| ARCDoc.PKDocAttribute.PriorityOrder | ARCDoc | ClassMember | See -PriorityOrder-. |
| ARCDoc.Orange.SetPVDirect | ARCDoc | ClassMember | High performance alternative to -TrySetP-, accessing -Storage- more direct. |
| ARCDoc.PKDocAttribute.IsDefault | ARCDoc | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCDoc.Orange.GetPVDirect | ARCDoc | ClassMember | High performance alternative to -TryGetP-, accessing -Storage- more direct. |
| ARCDoc.UtilDoc | ARCDoc | Class | Utility methods for -ARCDoc-. |
| ARCDoc.Orange.TryGetPVDirect | ARCDoc | ClassMember | High performance alternative to -TryGetP-, accessing -Storage- more direct. |
| ARCDoc.UtilDoc.GetCurrentLevelInHierarchyAsHTML | ARCDoc | ClassMember | Returns an HTML presentation of the given link context, with links pointing backwards to each level in the hierarchy. |
| ARCDoc.Orange.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.UtilDoc.GenerateHTMLPage | ARCDoc | ClassMember | Wraps the parameter inside a <html><head></head><body>...</body></html> enclosure with some rudimentare CSS. |
| ARCDoc.Orange.Name | ARCDoc | ClassMember | See -Name- for more information. |
| ARCDoc.UtilDoc.GlobalHeaderHTML | ARCDoc | ClassMember | Global header to be inserted at the top of every HTML page created by -GenerateHTMLPage-. |
| ARCDoc.Orange.Storage | ARCDoc | ClassMember | Uses int-value of -__enum- minus 1 as index. |
| ARCDoc.HTOC+ParentChain | ARCDoc | Class | Used by -FilterNode- in order to keep track of node's parents. |
| ARCDoc.SomeAppComponent | ARCDoc | Class | Demonstrates how also your actual application classes, not only your data classes, should implement -IP-. |
| ARCDoc.AppleP | ARCDoc | Enum | Describes class -Apple-. |
| ARCDoc.SomeAppComponent.MethodC | ARCDoc | ClassMember | Note structured format in logging. |
| ARCDoc.AppleP.Name | ARCDoc | EnumMember | The name of the apple |
| ARCDoc.SomeAppComponent.MethodD | ARCDoc | ClassMember | Same as MethodC- but returns data ('Func<string>()' instead of 'Action()') |
| ARCDoc.AppleP.Colour | ARCDoc | EnumMember | |
| ARCDoc.SomeAppComponent.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.BananaP | ARCDoc | Enum | Describes class -Banana-. |
| ARCDoc.DocFrag | ARCDoc | Class | DocFrag = Document fragment. |
| ARCDoc.BananaP.Name | ARCDoc | EnumMember | The name of the banana |
| ARCDoc.DocFrag.Create Overload1 | ARCDoc | ClassMember | Creates a -DocFrag- object representing an assembly or a namespace. |
| ARCDoc.BananaP.Colour | ARCDoc | EnumMember | |
| ARCDoc.DocFrag.Create Overload2 | ARCDoc | ClassMember | Creates a -DocFrag- object representing a class, class member, enum or enum member. |
| ARCDoc.OrangeP | ARCDoc | Enum | Describes class -Orange-. |
| ARCDoc.DocFrag.ToHTMLSimpleSingle | ARCDoc | ClassMember | Alternative ('override') to -ToHTMLSimpleSingle-. |
| ARCDoc.OrangeP.Name | ARCDoc | EnumMember | The name of the orange |
| ARCDoc.DocFrag.TryGetP | ARCDoc | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCDoc.OrangeP.Colour | ARCDoc | EnumMember | |
| ARCDoc.DocFrag.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCDoc.SomeAppComponentP | ARCDoc | Enum | Describes class -SomeAppComponent-. |
| ARCDoc.DocFrag.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.SomeAppComponentP.SomeCountValue | ARCDoc | EnumMember | |
| ARCDoc.DocFragCollection | ARCDoc | Class | Contains a collection of -DocFrag- objects. |
| ARCDoc.SomeAppComponentP.SomeCountValueNotToBeLogged | ARCDoc | EnumMember | |
| ARCDoc.DocFragCollection.Create | ARCDoc | ClassMember | Creates documentation fragments (-DocFrag-) for all possible -BaseAttribute- elements found in the given assemblies. |
| ARCDoc.DocFragP | ARCDoc | Enum | Describes class -DocFrag-. |
| ARCDoc.DocFragCollection.TryGetP | ARCDoc | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCDoc.DocFragP.DocFragType | ARCDoc | EnumMember | |
| ARCDoc.DocFragCollection.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCDoc.DocFragP.Assembly | ARCDoc | EnumMember | Name of the assembly in which this fragment resides. |
| ARCDoc.DocFragCollection.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.DocFragP.Namespace | ARCDoc | EnumMember | Namespace in which this fragment resides. |
| ARCDoc.DocLink | ARCDoc | Class | Describes to where a single HTML link points. |
| ARCDoc.DocFragP.ParentNamespace | ARCDoc | EnumMember | Parent namespace of namespace in which this fragment resides. |
| ARCDoc.DocLink.TryGetP | ARCDoc | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCDoc.DocFragP.Type | ARCDoc | EnumMember | Type of class or enum which this fragment describes (also relevant for class or enum member). |
| ARCDoc.DocLink.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCDoc.DocFragP.Name | ARCDoc | EnumMember | As simple a name as practical usable. Often not unique within a greater context. |
| ARCDoc.DocLink.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.DocFragP.IsInherited | ARCDoc | EnumMember | Relevant for class members. TRUE if method is inherited from a base type. |
| ARCDoc.DocLink.Location | ARCDoc | ClassMember | Copy of -Location-. |
| ARCDoc.DocFragP.IsInheritedDoc | ARCDoc | EnumMember | Relevant for class members (methods). |
| ARCDoc.DocLink.Filename | ARCDoc | ClassMember | Copy of -LinkWordHTML-. |
| ARCDoc.DocFragP.Lines | ARCDoc | EnumMember | Number of lines of text in -Description- and -LongDescription- for this fragment. |
| ARCDoc.DocLink.LinkWordHTML | ARCDoc | ClassMember | Copy of -LinkWordHTML-. |
| ARCDoc.DocFragP.Attribute | ARCDoc | EnumMember | The -BaseAttribute- or -PK- from which this -DocFrag- originates. |
| ARCDoc.DummyEnum.TryGetP | ARCDoc | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCDoc.DocFragType | ARCDoc | Enum | Type of documentation fragment, like -Assembly-, -Class- or -ClassMember-. |
| ARCDoc.DummyEnum.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCDoc.DocFragType.Assembly | ARCDoc | EnumMember | |
| ARCDoc.DummyEnum.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.DocFragType.Namespace | ARCDoc | EnumMember | |
| ARCDoc.Extensions | ARCDoc | Class | Contains various extension methods for -IP- and -IKIP- related to documentating / reporting / HTML. |
| ARCDoc.DocFragType.Class | ARCDoc | EnumMember | Does also include interfaces. |
| ARCDoc.Extensions.ToHTMLSimpleSingleRecursive | ARCDoc | ClassMember | Calls -ToHTMLSimpleSingle- recursively. |
| ARCDoc.DocFragType.ClassMember | ARCDoc | EnumMember | |
| ARCDoc.Extensions.ToHTMLSimpleSingle | ARCDoc | ClassMember | Creates a simple HTML representation of the given parameter. |
| ARCDoc.DocFragType.Enum | ARCDoc | EnumMember | |
| ARCDoc.Extensions.ToHTMLSimpleSingleInternal | ARCDoc | ClassMember | Hack in order to escape check for direct implementation in actual class of -ToHTMLSimpleSingle- in -ToHTMLSimpleSingle-. |
| ARCDoc.DocFragType.EnumMember | ARCDoc | EnumMember | |
| ARCDoc.Extensions.ToHTMLSimpleAsTableRow | ARCDoc | ClassMember | Creates a simple HTML representation of the given parameter as a single two column row (Key, Value) in a table. |
| ARCDoc.DocLinkP | ARCDoc | Enum | Describes class -DocLink-. |
| ARCDoc.Extensions.DescribeValue | ARCDoc | ClassMember | Describes the value contained withing an -IKIP- (-P-). |
| ARCDoc.DocLinkP.Location | ARCDoc | EnumMember | The location that this link points to. |
| ARCDoc.Extensions.ValueToHTMLSimpleWithTooltip | ARCDoc | ClassMember | Creates a simple HTML representation of the Value with description as a 'tooltip'. |
| ARCDoc.DocLinkP.Filename | ARCDoc | EnumMember | |
| ARCDoc.Extensions.KeyToHTMLSimpleWithTooltip | ARCDoc | ClassMember | Creates a simple HTML representation of the Key with description as a 'tooltip'. |
| ARCDoc.DocLinkP.LinkWordHTML | ARCDoc | EnumMember | Actual link as it is expected to occur in text, like '-MyCustomerClass<T>-'. |
| ARCDoc.Extensions.GetHelptextHTML | ARCDoc | ClassMember | Returns content of -Description- and -LongDescription-. |
| ARCDoc.DocLinkResolutionP | ARCDoc | Enum | Describes class -DocLinkResolution- |
| ARCDoc.HLocation | ARCDoc | Class | Simple class describing the location of a single -IP- instance within some hierarhical context. |
| ARCDoc.DocLinkResolutionP.LinkWord | ARCDoc | EnumMember | |
| ARCDoc.HLocation.TryGetP | ARCDoc | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCDoc.DocLinkResolutionP.DocLinks | ARCDoc | EnumMember | The possible links for -LinkWord- |
| ARCDoc.HLocation.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCDoc.DocumentatorP | ARCDoc | Enum | Describes class -Documentator-. |
| ARCDoc.HLocation.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.DummyEnumP | ARCDoc | Enum | TODO: Document better what this is for (and change name) |
| ARCDoc.HLocation.Content | ARCDoc | ClassMember | The Content object is not stored within the standard -IP--mechanism. |
| ARCDoc.DummyEnumP._MemberInherited | ARCDoc | EnumMember | Contains not only members which are inherited in the object-oriented sense, but also overrides for which the only documentation was found in base class |
| ARCDoc.HLocationCollection | ARCDoc | Class | Contains a collection of -HLocation- objects. |
| ARCDoc.HLocationP | ARCDoc | Enum | Describes class -HLocation-. |
| ARCDoc.HLocationCollection.Create | ARCDoc | ClassMember | Transforms the parameter (and recursively all contained objects) into a collection of -HLocation- objects. |
| ARCDoc.HLocationP.Location | ARCDoc | EnumMember | Folder names / hierarchical levels. |
| ARCDoc.HLocationCollection.WriteAllContentHTMLToDisk | ARCDoc | ClassMember | Writes all -HLocation- results to a hierarhical folder structure as static HTML files with (optionally) -LinkInsertionInDocumentation-. |
| ARCDoc.HLocationP.Filename | ARCDoc | EnumMember | Either the last hierarhical key for the content's location, or Index.html if no location. |
| ARCDoc.HLocationCollection.TryGetP | ARCDoc | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCDoc.HLocationP.ContentType | ARCDoc | EnumMember | The type of the content object. The actual content object is stored as -Content-. |
| ARCDoc.HLocationCollection.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCDoc.PKDocAttributeP | ARCDoc | Enum | Describes class -PKDocAttribute-. |
| ARCDoc.HLocationCollection.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.PKDocAttributeP.PriorityOrder | ARCDoc | EnumMember | Used by -DescribeValue-. |
| ARCDoc.HTOC | ARCDoc | Class | HTOC = Hierarchical table of contents. |
| ARCDoc.PriorityOrder | ARCDoc | Enum | Used for general sorting / prioritizing when showing properties for an entity. |
| ARCDoc.HTOC.Create | ARCDoc | ClassMember | Structures content hierarchically according to the criteria for each level. |
| ARCDoc.PriorityOrder.NotImportant | ARCDoc | EnumMember | |
| ARCDoc.HTOC.ToHTMLSimpleSingle Overload2 | ARCDoc | ClassMember | Alternative ('override') to -ToHTMLSimpleSingle-. |
| ARCDoc.PriorityOrder.Important | ARCDoc | EnumMember | |
| ARCDoc.HTOC.ToHTMLSimpleSingle Overload1 | ARCDoc | ClassMember | Use this method in any class where a table-of-contents type of view is desireable |
| Assembly ARCQuery | Assembly | ARCQuery provides a query language that mimicks SQL but is usable through HTTP as GET URLs. | |
| ARCDoc.HTOC.CreateInitialContent | ARCDoc | ClassMember | Helper method for creation of a -FilterBranch-. |
| ARCQuery.BinaryOperatorKey | ARCQuery | Class | Offers expressions with operators like +, -, * and /. |
| ARCDoc.HTOC.TryGetP | ARCDoc | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCQuery.BinaryOperatorKey.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCDoc.HTOC.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCQuery.BinaryOperatorKey.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCDoc.HTOC.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCQuery.BinaryOperatorKey.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| ARCDoc.HTOC.HTOCContentThisLevelKey | ARCDoc | ClassMember | The key used for storing the actual content at this level. |
| ARCQuery.EntityMethodKey.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCQuery.BinaryOperatorKey.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
| ARCQuery.ForeignKey | ARCQuery | Class | Can find related values, through compound field names. |
| ARCQuery.BinaryOperatorKey.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCQuery.ForeignKey.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCQuery.CompoundInvalidKey | ARCQuery | Class | Used as a practical solution in order to know that a given key has been attemped parsed, but was not valid. |
| ARCQuery.ForeignKey.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCQuery.CompoundInvalidKey.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCQuery.ForeignKey.AllForeignKeysForEntityType | ARCQuery | ClassMember | Returns all possible foreign keys relevant for the given entity type, like for Order: 'Customer.FirstName' and 'Customer.LastName'. |
| ARCQuery.CompoundInvalidKey.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCQuery.ForeignKey.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| ARCQuery.CompoundInvalidKey.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| ARCQuery.ForeignKey.Steps | ARCQuery | ClassMember | The actual -ForeignKeySingleStep- leading to the -ForeignField-. |
| ARCQuery.CompoundInvalidKey.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
| ARCQuery.ForeignKey.StepsAreOnlyDirectionToOne | ARCQuery | ClassMember | If TRUE then -TryGetPInternal) will use much simpler code without collections and parallell executions. |
| ARCQuery.CompoundInvalidKey.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCQuery.ForeignKey.ForeignField | ARCQuery | ClassMember | The actual field in the final foreign entity to return value for. |
| ARCQuery.CompoundKey | ARCQuery | Class | A class able to expand the concept of entity keys. |
| ARCQuery.ForeignKey.AggregateKeys | ARCQuery | ClassMember | Aggregations to be used on the multiple foreign entity values that are found when one of the -Steps- are -ToMany-. |
| ARCQuery.CompoundKey.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| ARCQuery.ForeignKey.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
| ARCQuery.CompoundKey.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCQuery.ForeignKey.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCQuery.CompoundKey.Parse | ARCQuery | ClassMember | Note that no TryParse is offered here, because Parse will always succeed (it just returns -CompoundInvalidKey- if 'fails'). |
| ARCQuery.ForeignKey.IPRelationsKeysPointingTo | ARCQuery | ClassMember | Contains, for each (entity type) key, a list of entity types with foreign keys pointing to that entity type. |
| ARCQuery.CompoundKey.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCQuery.ForeignKey.IPRelationsKeysPointingFrom | ARCQuery | ClassMember | Contains, for each (entity type) key, a list of entity types which that entity type points to. |
| ARCQuery.CompoundKey.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
| ARCQuery.MemberEntityKey | ARCQuery | Class | Can find value for entity which is member of entity being queried. |
| ARCQuery.CompoundKey.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCQuery.MemberEntityKey.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCQuery.ConstantKey<T> | ARCQuery | Class | Represents a constant expression like "' '", "', '", "42". |
| ARCQuery.MemberEntityKey.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCQuery.ConstantKey<T>.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCQuery.MemberEntityKey.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| ARCQuery.ConstantKey<T>.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCQuery.MemberEntityKey.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
| ARCQuery.ConstantKey<T>.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| ARCQuery.MemberEntityKey.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCQuery.ConstantKey<T>.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
| ARCQuery.OrdinaryKeyPlusFunctionOrQuantile | ARCQuery | Class | A -CompoundKey- containing some function keys or quantile key operating on an existing property of the entity in question. |
| ARCQuery.ConstantKey<T>.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCQuery.OrdinaryKeyPlusFunctionOrQuantile.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCQuery.EntityMethodKey | ARCQuery | Class | Key able to call read-only methods defined in the entity class with names like 'TryGet{FieldName}'. |
| ARCQuery.OrdinaryKeyPlusFunctionOrQuantile.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCQuery.EntityMethodKey.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCQuery.OrdinaryKeyPlusFunctionOrQuantile.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| ARCQuery.EntityMethodKey.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCQuery.OrdinaryKeyPlusFunctionOrQuantile..ctor | ARCQuery | ClassMember | Note that calling only this constructor without afterwards setting -FunctionKeys- and / or -QuantileKey- would be meaningless. |
| ARCQuery.EntityMethodKey.AllEntityMethodKeysForEntityTypeDict | ARCQuery | ClassMember | Returns all -EntityMethodKey- in the class definition of the given entity type. |
| ARCQuery.OrdinaryKeyPlusFunctionOrQuantile.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
| ARCQuery.EntityMethodKey.AllEntityMethodKeysForEntityTypeList | ARCQuery | ClassMember | Returns List sorted by Method Name of Value of Dictionary returned by -AllEntityMethodKeysForEntityTypeDict- |
| ARCQuery.OrdinaryKeyPlusFunctionOrQuantile.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCQuery.EntityMethodKey.TryGetForeignField | ARCQuery | ClassMember | Returns foreign field through foreign key given. |
| ARCQuery.Extensions | ARCQuery | Class | |
| ARCQuery.EntityMethodKey.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| ARCQuery.Extensions.TryGetP | ARCQuery | ClassMember | Same functionality as -TryGetP- but understands the concept of -CompoundKey-. |
| ARCQuery.EntityMethodKey.Method | ARCQuery | ClassMember | The actuall TryGet method implemented in the relevant entity class. |
| ARCQuery.FunctionKeyAggregate | ARCQuery | Class | Operates over a collection of properties. |
| ARCQuery.EntityMethodKey.MethodNameAsIK | ARCQuery | ClassMember | Name of TryGet method but without 'TryGet' in name |
| ARCQuery.FunctionKeyAggregate.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.EntityMethodKey.ReturnType | ARCQuery | ClassMember | The type of the 'retval' out-parameter of the method. |
| ARCQuery.FunctionKeyAggregateAvg | ARCQuery | Class | Calculates the average of the given properties. |
| ARCQuery.EntityMethodKey.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
| ARCQuery.FunctionKeyDouble.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.FunctionKeyAggregateAvg.SyntaxHelp | ARCQuery | ClassMember | 'Avg()' |
| ARCQuery.FunctionKeyDouble.SyntaxHelp | ARCQuery | ClassMember | 'Double()' |
| ARCQuery.FunctionKeyAggregateCount | ARCQuery | Class | Counts the number of properties found. |
| ARCQuery.FunctionKeyFirstLine | ARCQuery | Class | Extracts first line from string of text. |
| ARCQuery.FunctionKeyAggregateCount.SyntaxHelp | ARCQuery | ClassMember | 'Count()' |
| ARCQuery.FunctionKeyFirstLine.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.FunctionKeyAggregateDistinct | ARCQuery | Class | Returns a list of the distinct values of the given properties. |
| ARCQuery.FunctionKeyFirstLine.SyntaxHelp | ARCQuery | ClassMember | 'FirstLine()' |
| ARCQuery.FunctionKeyAggregateDistinct.SyntaxHelp | ARCQuery | ClassMember | 'Distinct()' |
| ARCQuery.FunctionKeyVeryShort | ARCQuery | Class | Returns the -ToStringVeryShort- representation of the given type. |
| ARCQuery.FunctionKeyAggregateJoin | ARCQuery | Class | Joins the given list of properties into a single property. |
| ARCQuery.FunctionKeyVeryShort.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.FunctionKeyAggregateJoin.SyntaxHelp | ARCQuery | ClassMember | 'Join()' |
| ARCQuery.FunctionKeyVeryShort.SyntaxHelp | ARCQuery | ClassMember | 'VeryShort()' |
| ARCQuery.FunctionKeyAggregateMax | ARCQuery | Class | Calculates the maximum value of the given properties. |
| ARCQuery.FunctionKeyHourMinute | ARCQuery | Class | Formats a timespan with only the hour and minute part. Uses format hh:mm. |
| ARCQuery.FunctionKeyAggregateMax.SyntaxHelp | ARCQuery | ClassMember | 'Max()' |
| ARCQuery.FunctionKeyHourMinute.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.FunctionKeyAggregateMin | ARCQuery | Class | Calculates the minimum value of the given properties. |
| ARCQuery.FunctionKeyHourMinute.SyntaxHelp | ARCQuery | ClassMember | 'HourMinute()' |
| ARCQuery.FunctionKeyAggregateMin.SyntaxHelp | ARCQuery | ClassMember | 'Min()' |
| ARCQuery.FunctionKeyInt | ARCQuery | Class | Rounds a double value to the nearest integer (uses .NET data type Int64 (long)). |
| ARCQuery.FunctionKeyAggregateSingle | ARCQuery | Class | Ensures that the given list of properties contains only a single item and returns that item. |
| ARCQuery.FunctionKeyInt.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.FunctionKeyAggregateSingle.SyntaxHelp | ARCQuery | ClassMember | 'Single()' |
| ARCQuery.FunctionKeyInt.SyntaxHelp | ARCQuery | ClassMember | 'Int()' |
| ARCQuery.FunctionKeyAggregateSum | ARCQuery | Class | Sums the given properties. |
| ARCQuery.FunctionKeyLength | ARCQuery | Class | Returns length of (string) value of field, like 4 for 'John'. |
| ARCQuery.FunctionKeyAggregateSum.SyntaxHelp | ARCQuery | ClassMember | 'Sum()' |
| ARCQuery.FunctionKeyLength.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.FunctionKey | ARCQuery | Class | Extracts data from an already existing value like extracting Year from a DateTime in 'Created.Year()'. |
| ARCQuery.FunctionKeyLength.SyntaxHelp | ARCQuery | ClassMember | 'Length()' |
| ARCQuery.FunctionKey.TryGetP Overload1 | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.FunctionKeyMonth | ARCQuery | Class | Extracts month component from field like '2020-12-09' becoming '12'. |
| ARCQuery.FunctionKey.AddParser | ARCQuery | ClassMember | Adds a -ApplicationSpecificCode- parser. |
| ARCQuery.FunctionKeyMonth.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.FunctionKey.TryParse | ARCQuery | ClassMember | Find parsers from -Parsers- based on first word in query. |
| ARCQuery.FunctionKeyMonth.SyntaxHelp | ARCQuery | ClassMember | 'Month()' |
| ARCQuery.FunctionKey.TryParseSingleWord | ARCQuery | ClassMember | Recommended parser to use for functions without parameters. |
| ARCQuery.FunctionKeyQuarter | ARCQuery | Class | Extracts quarter component from datetime field like '2020-12-09' becoming 'Q4'. |
| ARCQuery.FunctionKey.TryGetP Overload2 | ARCQuery | ClassMember | Overload which will try to call -TryGetV- with generic type parameter, and if that does not succeed will try to call the optional 'tryParser'. |
| ARCQuery.FunctionKeyQuarter.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.FunctionKey.Parsers | ARCQuery | ClassMember | Instances of all the relevant sub classes of -FunctionKey-. |
| ARCQuery.FunctionKeyQuarter.SyntaxHelp | ARCQuery | ClassMember | 'Quarter()' |
| ARCQuery.FunctionKeyAbs | ARCQuery | Class | Returns the absolute value of field, like 4 for '-4'. |
| ARCQuery.FunctionKeyShort | ARCQuery | Class | 'Smart' way of showing time. Removes unnecessary information. |
| ARCQuery.FunctionKeyAbs.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.FunctionKeyShort.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.FunctionKeyAbs.SyntaxHelp | ARCQuery | ClassMember | 'Abs()' |
| ARCQuery.FunctionKeyShort.SyntaxHelp | ARCQuery | ClassMember | 'Short()' |
| ARCQuery.FunctionKeyDate | ARCQuery | Class | Formats a date without time component. |
| ARCQuery.FunctionKeyTMB | ARCQuery | Class | TMB = Thousands, Millions, Billions. |
| ARCQuery.FunctionKeyDate.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.FunctionKeyTMB.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.FunctionKeyDate.SyntaxHelp | ARCQuery | ClassMember | 'Date()' |
| ARCQuery.FunctionKeyTMB.SyntaxHelp | ARCQuery | ClassMember | 'TMB()' |
| ARCQuery.FunctionKeyDayOfWeek | ARCQuery | Class | Extracts DayOfWeek from field like 'Monday', 'Tuesday' and so on. |
| ARCQuery.FunctionKeyTotalHours | ARCQuery | Class | Converts a timespan to total hours (as an integer). |
| ARCQuery.FunctionKeyDayOfWeek.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.FunctionKeyTotalHours.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.FunctionKeyDayOfWeek.SyntaxHelp | ARCQuery | ClassMember | 'DayOfWeek()' |
| ARCQuery.FunctionKeyTotalHours.SyntaxHelp | ARCQuery | ClassMember | 'TotalHours()' |
| ARCQuery.FunctionKeyDouble | ARCQuery | Class | Converts an integer to a double (decimal value). |
| ARCQuery.NewKeyCountP.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCQuery.FunctionKeyTotalMinutes | ARCQuery | Class | Converts a timespan to total minutes (as an integer). |
| ARCQuery.NewKeyCountP.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCQuery.FunctionKeyTotalMinutes.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.NewKeyCountP.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| ARCQuery.FunctionKeyTotalMinutes.SyntaxHelp | ARCQuery | ClassMember | 'TotalMinutes()' |
| ARCQuery.NewKeyCountP.SyntaxHelp | ARCQuery | ClassMember | 'CountP()' |
| ARCQuery.FunctionKeyType | ARCQuery | Class | Returns the type of a property. |
| ARCQuery.NewKeyCountP.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
| ARCQuery.FunctionKeyType.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.NewKeyCountP.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCQuery.FunctionKeyType.SyntaxHelp | ARCQuery | ClassMember | 'Type()' |
| ARCQuery.NewKeyCountPRec | ARCQuery | Class | Returns the number of properties for a given entity object. |
| ARCQuery.FunctionKeyWeek | ARCQuery | Class | Extract week-number from field according to ISO 8601. |
| ARCQuery.NewKeyCountPRec.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCQuery.FunctionKeyWeek.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.NewKeyCountPRec.CountPRec | ARCQuery | ClassMember | Counts recursively the number of properties for a given entity object. |
| ARCQuery.FunctionKeyWeek.SyntaxHelp | ARCQuery | ClassMember | 'Week()' |
| ARCQuery.NewKeyCountPRec.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCQuery.FunctionKeyYear | ARCQuery | Class | Extracts Year-component from field. |
| ARCQuery.NewKeyCountPRec.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| ARCQuery.FunctionKeyYear.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.NewKeyCountPRec.SyntaxHelp | ARCQuery | ClassMember | 'CountPRec()' |
| ARCQuery.FunctionKeyYear.SyntaxHelp | ARCQuery | ClassMember | 'Year()' |
| ARCQuery.NewKeyCountPRec.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
| ARCQuery.FunctionKeyYearMonth | ARCQuery | Class | Extracts Year + Month component from field like 2020-06. |
| ARCQuery.NewKeyCountPRec.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCQuery.FunctionKeyYearMonth.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.NewKeyGetType | ARCQuery | Class | Returns the internal C# object type of the given object. |
| ARCQuery.FunctionKeyYearMonth.SyntaxHelp | ARCQuery | ClassMember | 'YearMonth()' |
| ARCQuery.NewKeyGetType.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCQuery.FunctionKeyYearQuarter | ARCQuery | Class | Extracts Year + Quarter component from field like 2020Q1. |
| ARCQuery.NewKeyGetType.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCQuery.FunctionKeyYearQuarter.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.NewKeyGetType.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| ARCQuery.FunctionKeyYearQuarter.SyntaxHelp | ARCQuery | ClassMember | 'YearQuarter()' |
| ARCQuery.NewKeyGetType.SyntaxHelp | ARCQuery | ClassMember | 'GetType()' |
| ARCQuery.FunctionKeyYearWeek | ARCQuery | Class | Extract year and week number from field according to ISO 8601 like '2021-51' |
| ARCQuery.NewKeyGetType.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
| ARCQuery.FunctionKeyYearWeek.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.NewKeyGetType.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCQuery.FunctionKeyYearWeek.SyntaxHelp | ARCQuery | ClassMember | 'YearWeek()' |
| ARCQuery.NewKeyToPropertyStream | ARCQuery | Class | Returns the -PropertyStream- representation of the given object. |
| ARCQuery.NewKey | ARCQuery | Class | A function creating new keys (new fields) that can be used against all object types in AgoRapide (against all entities). |
| ARCQuery.NewKeyToPropertyStream.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCQuery.NewKey.AddParser | ARCQuery | ClassMember | Adds an -ApplicationSpecificCode- parser. |
| ARCQuery.NewKeyToPropertyStream.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCQuery.NewKey.TryParse | ARCQuery | ClassMember | Find parsers from -Parsers- based on first word in query. |
| ARCQuery.NewKeyToPropertyStream.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| ARCQuery.NewKey.TryParseSingleWord | ARCQuery | ClassMember | Recommended parser to use for functions without parameters. |
| ARCQuery.NewKeyToPropertyStream.SyntaxHelp | ARCQuery | ClassMember | 'ToPropertyStream()' |
| ARCQuery.NewKey.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| ARCQuery.NewKeyToPropertyStream.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
| ARCQuery.NewKey.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCQuery.NewKeyToPropertyStream.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCQuery.NewKey.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCQuery.QuantileKey | ARCQuery | Class | Can separate entities into quantiles, like Quartiles, Quintiles or Sextiles. |
| ARCQuery.NewKey.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
| ARCQuery.QuantileKey.TryGetP | ARCQuery | ClassMember | Returns an integer with the number of the quantile group for the value returned by the given -CompoundKey-). |
| ARCQuery.NewKey.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCQuery.QuantileKey.TryParse | ARCQuery | ClassMember | Note that any value (positive integer greated than 2) is accepted, not necessarily only string-representations of enums within -Quantile-. |
| ARCQuery.NewKey.Parsers | ARCQuery | ClassMember | Instances of all the relevant sub classes of -NewKey-. |
| ARCQuery.Query | ARCQuery | Class | Keeps track of progress of query, and the interim result. |
| ARCQuery.NewKeyCountP | ARCQuery | Class | Returns the number of properties for a given entity object. |
| ARCQuery.QueryExpressionDataStorage | ARCQuery | Class | Experimental as of Mar 2022: Resets value for -DataStorage- |
| ARCQuery.Query.ShouldTerminate | ARCQuery | ClassMember | Attempts to explain problem, in -TerminateReason- and by logging. |
| ARCQuery.QueryExpressionDataStorage.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.Query.ExecuteOne | ARCQuery | ClassMember | NOTE: Note how avoids deferred execution in order to always correctly time execution of each query element separately. |
| ARCQuery.QueryExpressionDataStorage.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.Query.AllLogEntriesForThisQuery | ARCQuery | ClassMember | Temporary storage of log information. |
| ARCQuery.QueryExpressionDataStorage.SyntaxHelp | ARCQuery | ClassMember | DATASTORAGE {new hierarchical level} [link adjustment] |
| ARCQuery.Query.Progress | ARCQuery | ClassMember | Use of member class in order for -Query- not to inherit -IP-. |
| ARCQuery.QueryExpressionDataStorage.LinkAdjustment | ARCQuery | ClassMember | See -LinkAdjustment- for documentation. |
| ARCQuery.QueryExpression | ARCQuery | Class | Represents part of a query (or actually a transformation) against a given collection and the data storage from which it was taken. |
| ARCQuery.QueryExpressionDataStorage.GlobalDataStorage | ARCQuery | ClassMember | TODO: Find some better initialization here. |
| ARCQuery.QueryExpression.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.QueryExpressionHint | ARCQuery | Class | Describes if hints are to be generated (as query progresses) for potential new queries. |
| ARCQuery.QueryExpression.AddParser | ARCQuery | ClassMember | Adds a -ApplicationSpecificCode- parser. |
| ARCQuery.QueryExpressionHint.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.QueryExpression.TryParse | ARCQuery | ClassMember | Find parsers from -Parsers- based on first word in query. |
| ARCQuery.QueryExpressionHint.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.QueryExpression.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.QueryExpressionHint.SyntaxHelp | ARCQuery | ClassMember | HINT {ON|OFF} |
| ARCQuery.QueryExpression.Parsers | ARCQuery | ClassMember | Parsers for all the relevant sub classes of -QueryExpression-. |
| ARCQuery.QueryExpressionLimit | ARCQuery | Class | Limits the final HTML presentation of results (limits the number of elements being presented). |
| ARCQuery.QueryExpressionWithSuggestions | ARCQuery | Class | Keeps track as each query item gets executed. |
| ARCQuery.QueryExpressionLimit.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.QueryExpressionWithSuggestions.Previous | ARCQuery | ClassMember | Suggestion for a 'browse backwards' button. |
| ARCQuery.QueryExpressionLimit.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.QueryExpressionWithSuggestions.Next | ARCQuery | ClassMember | Suggestion for a 'browse forwards' button. |
| ARCQuery.QueryExpressionLimit.SyntaxHelp | ARCQuery | ClassMember | Syntax: LIMIT {limit} like 'LIMIT 42' |
| ARCQuery.QueryExpressionAggregate | ARCQuery | Class | Aggregates over the given key. |
| ARCQuery.QueryExpressionLog | ARCQuery | Class | A debugging tool used to extract detailed log information about the execution of the query. |
| ARCQuery.QueryExpressionAggregate.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.QueryExpressionLog.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.QueryExpressionAggregate.IsSuitableAggregator | ARCQuery | ClassMember | Returns true if |
| ARCQuery.QueryExpressionLog.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.QueryExpressionAggregate.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.QueryExpressionLog.SyntaxHelp | ARCQuery | ClassMember | 'Log'. |
| ARCQuery.QueryExpressionAggregate.SyntaxHelp | ARCQuery | ClassMember | 1) 'AGGREGATE {rowKey}' like "AGGREGATE Product" |
| ARCQuery.QueryExpressionOrderBy | ARCQuery | Class | Orders collection. |
| ARCQuery.QueryExpressionAggregate.AggregationType | ARCQuery | ClassMember | Most common value is -Count-, in which case -AggregationKey- may be correspondingly set to null. |
| ARCQuery.QueryExpressionOrderBy.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.QueryExpressionAggregate.AggregationKey | ARCQuery | ClassMember | This is often null (with -AggregationType- correspondingly set to Count-). |
| ARCQuery.QueryExpressionOrderBy.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.QueryExpressionAll | ARCQuery | Class | Represents all entities for a given collection. |
| ARCQuery.QueryExpressionOrderBy.SyntaxHelp | ARCQuery | ClassMember | ORDER BY {key} [DESC] / [ASC] |
| ARCQuery.QueryExpressionAll.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.QueryExpressionPivot | ARCQuery | Class | Creates a table by querying over two keys like |
| ARCQuery.QueryExpressionAll.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.QueryExpressionPivot.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.QueryExpressionAll.SyntaxHelp | ARCQuery | ClassMember | 'ALL' (literally). |
| ARCQuery.QueryExpressionPivot.GetCrossSummationChecker | ARCQuery | ClassMember | Returns a cross sum checker for int, long, double, Timespan. |
| ARCQuery.QueryExpressionCache | ARCQuery | Class | Describes if cache is to be used or not. |
| ARCQuery.QueryExpressionPivot.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.QueryExpressionCache.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.QueryExpressionPivot.SyntaxHelp | ARCQuery | ClassMember | 1) 'PIVOT {rowKey} BY {columnKey}' like "PIVOT Colour BY Production.Year" |
| ARCQuery.QueryExpressionCache.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.QueryExpressionPivot.AggregationType | ARCQuery | ClassMember | Most common value is -Count-, in which case -AggregationKey- may be correspondingly set to null. |
| ARCQuery.QueryExpressionCache.SyntaxHelp | ARCQuery | ClassMember | CACHE {ON|OFF} |
| ARCQuery.QueryExpressionPivot.AggregationKey | ARCQuery | ClassMember | This is often null (with -AggregationType- correspondingly set to Count-). |
| ARCQuery.QueryExpressionComment | ARCQuery | Class | Allows insertion of SQL style comments (beginning with double hyphens / minus signs, '--') into queries. |
| ARCQuery.QueryExpressionRel | ARCQuery | Class | Enables 'jumping' or 'travelling' from a collection of one entity type to another (related) entity type. |
| ARCQuery.QueryExpressionComment.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.QueryExpressionRel.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.QueryExpressionComment.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.QueryExpressionRel.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.QueryExpressionComment.SyntaxHelp | ARCQuery | ClassMember | COMMENT {comment text} |
| ARCQuery.QueryExpressionTitle.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.QueryExpressionRel.SyntaxHelp | ARCQuery | ClassMember | 'REL {type}' |
| ARCQuery.QueryExpressionTitle.SyntaxHelp | ARCQuery | ClassMember | TITLE {title} |
| ARCQuery.QueryExpressionRel.StrType | ARCQuery | ClassMember | In the simplest terms, the -ToStringVeryShort- representation of the type that we are 'jumping' to. |
| ARCQuery.QueryExpressionWhere | ARCQuery | Class | Executes a 'WHERE {key} {operator} {value}' against the given collection. |
| ARCQuery.QueryExpressionSelect | ARCQuery | Class | Selects which fields to include. |
| ARCQuery.QueryExpressionWhere.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.QueryExpressionSelect.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.QueryExpressionWhere.IsMatch | ARCQuery | ClassMember | Returns TRUE if property matches criteria. |
| ARCQuery.QueryExpressionSelect.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.QueryExpressionWhere.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.QueryExpressionSelect.SyntaxHelp | ARCQuery | ClassMember | SELECT {field-1}, {field-2} ... {field-n} |
| ARCQuery.QueryExpressionWhere.SyntaxHelp | ARCQuery | ClassMember | WHERE {key} {operator} {value} |
| ARCQuery.QueryExpressionSelfCreate | ARCQuery | Class | Returns self created collection from given class type. |
| ARCQuery.QueryExpressionWhere.Value | ARCQuery | ClassMember | The Value should ideally be as strongly typed as possible. Note that it may be of type -ValueEnum- relevant for queries like WHERE Name = NULL. |
| ARCQuery.QueryExpressionSelfCreate.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.QueryProgress | ARCQuery | Class | Keeps track of execution of query (that is, a query consisting of multiple -QueryExpression-), and also stores final result. |
| ARCQuery.QueryExpressionSelfCreate.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.QueryProgress.ToJSONSerializeable | ARCQuery | ClassMember | Override of default interface method -ToJSONSerializeable- is necessary because resulting data is 'hidden' within -Result-. |
| ARCQuery.QueryExpressionSelfCreate.SyntaxHelp | ARCQuery | ClassMember | SELFCREATE {Type supporting ISelfCreateCollection}' |
| ARCQuery.QueryProgress.PreviousQueryJustExecuted | ARCQuery | ClassMember | TODO: This is somewhat loosely associated. |
| ARCQuery.QueryExpressionShuffle | ARCQuery | Class | Shuffles collection in random order. |
| ARCQuery.QueryProgress.NextQueryToExecute | ARCQuery | ClassMember | TODO: This is somewhat loosely associated. |
| ARCQuery.QueryExpressionShuffle.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.QueryProgress.ToHTMLSimpleSingle | ARCQuery | ClassMember | Alternative ('override') to -ToHTMLSimpleSingle-. |
| ARCQuery.QueryExpressionShuffle.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.QueryProgress.OrderAndReconstructKeys | ARCQuery | ClassMember | Part 1: |
| ARCQuery.QueryExpressionShuffle.SyntaxHelp | ARCQuery | ClassMember | SHUFFLE |
| ARCQuery.QueryProgress.GetHTMLLinksToIndividualQueryParts | ARCQuery | ClassMember | Is able to generate the following: |
| ARCQuery.QueryExpressionSkip | ARCQuery | Class | Skips the specified number of elements from the current query result. |
| ARCQuery.QueryProgress.ToString | ARCQuery | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCQuery.QueryExpressionSkip.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.QueryProgress.DataStorage | ARCQuery | ClassMember | Note how this property will point to the hierarhical level in the data storage from which the first -QueryExpression- was found in the query string. |
| ARCQuery.QueryExpressionSkip.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.QueryProgress.Result | ARCQuery | ClassMember | This gets updated continously as the different query expressions get evaluated. |
| ARCQuery.QueryExpressionSkip.SyntaxHelp | ARCQuery | ClassMember | SKIP {Count} like 'SKIP 42' |
| ARCQuery.QueryProgress.ExecutedQueries | ARCQuery | ClassMember | The result from calling -Execute- for each query in -Queries-. |
| ARCQuery.QueryExpressionStrict | ARCQuery | Class | Describes -Strictness- ON / OFF when executing query. |
| ARCQuery.QueryProgress.AdditionalJavascriptUrlEncoder | ARCQuery | ClassMember | Returns the Javascript code for converting characters that are difficult to pass in URLs to a format understood by -Decode-. |
| ARCQuery.QueryExpressionStrict.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.Translations | ARCQuery | Class | Offers a very simple system for keeping track of translation between different ("western") languages. |
| ARCQuery.QueryExpressionStrict.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.Translations.ToString | ARCQuery | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCQuery.QueryExpressionStrict.SyntaxHelp | ARCQuery | ClassMember | STRICT {strictnessLevel} |
| ARCQuery.TranslationsCollection | ARCQuery | Class | This would consist of one key per language, with keys like "de_DE", "fr_FR", "nb_NO". |
| ARCQuery.QueryExpressionTake | ARCQuery | Class | Takes a specific number of elements from the current query result. |
| ARCQuery.TranslationsCollection.TrySetPP | ARCQuery | ClassMember | Replaces default interface method -TrySetPP-. |
| ARCQuery.QueryExpressionTake.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.TranslationsCollection.GetKeysEqualToValue | ARCQuery | ClassMember | Returns properties which themselves again have key and value equal to the given key and value. |
| ARCQuery.QueryExpressionTake.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.TranslationsCollection.TryGetP | ARCQuery | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCQuery.QueryExpressionTake.SyntaxHelp | ARCQuery | ClassMember | TAKE {Count} |
| ARCQuery.TranslationsCollection.TryGetV | ARCQuery | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCQuery.QueryExpressionThenBy | ARCQuery | Class | Allows sorting by multiple columns. |
| ARCQuery.TranslationsCollection.ToString | ARCQuery | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCQuery.QueryExpressionThenBy.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.TranslationSingle | ARCQuery | Class | Describes a single translation. |
| ARCQuery.QueryExpressionThenBy.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.TranslationSingle.TryGetReferenceCount | ARCQuery | ClassMember | Method signature understood by -TryGetP- / -EntityMethodKey-. |
| ARCQuery.QueryExpressionThenBy.SyntaxHelp | ARCQuery | ClassMember | THEN BY {key} [DESC] / [ASC] |
| ARCQuery.TranslationSingle.TryGetPS | ARCQuery | ClassMember | Returns a -PropertyStreamLine- representation of this translation. |
| ARCQuery.QueryExpressionTitle | ARCQuery | Class | The title to be used in the final presentation of the query result. |
| ARCQuery.TranslationSingle.TryGetA | ARCQuery | ClassMember | Returns a -PropertyStreamLine- representation of this translation. |
| ARCQuery.QueryExpressionTitle.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.TranslationSingle.TryGetMacro | ARCQuery | ClassMember | Returns a -PropertyStream- representation of this translation. |
| ARCQuery.ForeignKey+ForeignKeySingleStep | ARCQuery | Class | Describes how to traverse between related entities. |
| ARCQuery.TranslationSingle.TryGetP | ARCQuery | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCQuery.ForeignKey+ForeignKeySingleStep.ForeignEntitiesCollection | ARCQuery | ClassMember | The collection containing all the (foreign) entities for the type that this step leads to |
| ARCQuery.TranslationSingle.TryGetV | ARCQuery | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCQuery.QueryExpressionSelfCreate+ISelfCreateCollection | ARCQuery | Class | Provides a standardized mechanism for describing classes that are able to autogenerate collection of themeselves. |
| ARCQuery.TranslationSingle.ToString | ARCQuery | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCQuery.ForeignKeyDirection | ARCQuery | Enum | Describes the type of traversing to a foreign entity possible. |
| ARCQuery.TranslationSingle.ReferenceCount | ARCQuery | ClassMember | May be set from outside, for instance with System.Threading.Interlocked.Increment. |
| ARCQuery.ForeignKeyDirection.ToOne | ARCQuery | EnumMember | Traverse to one entity, like traversing from OrderLine to Order (based on OrderLine containing foreign key OrderId) or Order to Customer (based on Order containing foreign key CustomerId). |
| ARCQuery.UtilQuery | ARCQuery | Class | Utility methods for -ARCQuery-. |
| ARCQuery.ForeignKeyDirection.ToMany | ARCQuery | EnumMember | Traverse to many entities, like traversing from Customer to Order (based on Order containing foreign key CustomerId) or Order to OrderLine (based on OrderLine containing foreign key OrderId). |
| ARCQuery.UtilQuery.IndexOfOutsideOf | ARCQuery | ClassMember | Equivalent to string.IndexOf except that any character encountered inside pairs of the 'outsideOf'-char are not counted. |
| ARCQuery.AggregationType | ARCQuery | Enum | Used by -QueryExpressionPivot- and -QueryExpressionAggregate-. |
| ARCQuery.UtilQuery.IndexOfAnyOutsideOf | ARCQuery | ClassMember | Equivalent to string.IndexOfAny except that any character encountered inside pairs of the 'outsideOf'-char are not counted. |
| ARCQuery.AggregationType.Count | ARCQuery | EnumMember | |
| ARCQuery.UtilQuery.SplitOutsideOf | ARCQuery | ClassMember | Equivalent to string.Split except that any character encountered inside pairs of the 'outsideOf'-char are not counted as separators. |
| ARCQuery.AggregationType.Sum | ARCQuery | EnumMember |
Generated 2025-12-20 21:03:57.784 UTC