[ROOT] doc DocFrag SELECT Assembly, DocFragType, Description.FirstLine() < SKIP 4 > < TAKE 64 >

64 items

DocFragId	Assembly	DocFragType	Description.FirstLine()
ARCQuery.Query.ExecuteOne	ARCQuery	ClassMember	NOTE: Note how avoids deferred execution in order to always correctly time execution of each query element separately.
ARCCore.BaseAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.IKLong	ARCCore	Class	A more memory efficient alternative to -IKString-.
ARCQuery.Query.AllLogEntriesForThisQuery	ARCQuery	ClassMember	Temporary storage of log information.
ARCCore.BaseAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.IKLong.op_Equality	ARCCore	ClassMember	It is quite natural in the code to write code like "if (a.CustomerId == b.CustomerId)", therefore the need to implement == and != operators here.
ARCQuery.Query.Progress	ARCQuery	ClassMember	Use of member class in order for -Query- not to inherit -IP-.
ARCCore.BaseAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.IKLong.EnrichKey	ARCCore	ClassMember	'Implementing' -ITypeDescriber-.
ARCQuery.QueryExpression	ARCQuery	Class	Represents part of a query (or actually a transformation) against a given collection and the data storage from which it was taken.
ARCCore.BasePKAttribute	ARCCore	Class	The class containing the actual attributes used for -TaggingOfPropertyKeys-.
ARCCore.IKString	ARCCore	Class	Index key for any general id, like primary-key or sequence-number or similar.
ARCQuery.QueryExpression.Execute	ARCQuery	ClassMember	Transforms the given input collection into a resulting collection.
ARCCore.BasePKAttribute.GetAttributes	ARCCore	ClassMember	Note that illegal to call for other than -PropertyKeyEnum-.
ARCCore.IKString.FromCache	ARCCore	ClassMember	Reduces number of objects generated by caching those known to be within a limited range
ARCQuery.QueryExpression.AddParser	ARCQuery	ClassMember	Adds a -ApplicationSpecificCode- parser.
ARCCore.BasePKAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.IKString.FromString	ARCCore	ClassMember	Note how uses instance cache if already exists there
ARCQuery.QueryExpression.TryParse	ARCQuery	ClassMember	Find parsers from -Parsers- based on first word in query.
ARCCore.BasePKAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.IKString.op_Equality	ARCCore	ClassMember	It is quite natural in the code to write code like "if (a.CustomerId == b.CustomerId)", therefore the need to implement == and != operators here.
ARCQuery.QueryExpression.TryCheckForExistenceOfKey	ARCQuery	ClassMember	Used by query expressions in order to catch wrong field names used or misspelling of field names.
ARCCore.BasePKAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.IKString.EnrichKey	ARCCore	ClassMember	'Implementing' -ITypeDescriber-.
ARCQuery.QueryExpression.Parsers	ARCQuery	ClassMember	Parsers for all the relevant sub classes of -QueryExpression-.
ARCCore.ClassAttribute	ARCCore	Class	Describes a class.
ARCCore.IKType	ARCCore	Class	Index key used when storing a collection of a given type, like 'Customer'.
ARCQuery.QueryExpressionWithSuggestions	ARCQuery	Class	Keeps track as each query item gets executed.
ARCCore.ClassAttribute.GetAttribute	ARCCore	ClassMember	Throws exception if type implements -IP- and no corresponding enum found (enum ending with capital letter 'P' (like 'CustomerP' for enum describing class 'Customer' for instance)
ARCCore.IKType.ToString	ARCCore	ClassMember	Caching is supposed to be useful because may be called quite often.
ARCQuery.QueryExpressionWithSuggestions.Previous	ARCQuery	ClassMember	Suggestion for a 'browse backwards' button.
ARCCore.ClassAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.ITypeDescriber	ARCCore	Class	Provides a standardized mechanism for describing single-property values (like 'PhoneNumber' of 'Customer' for instance).
ARCQuery.QueryExpressionWithSuggestions.Next	ARCQuery	ClassMember	Suggestion for a 'browse forwards' button.
ARCCore.ClassAttribute.TryGetAsTypeScript	ARCCore	ClassMember	Generates typescript code corresponding to the class which this instance describes.
ARCCore.ITypeDescriber.GetSyntaxHelp	ARCCore	ClassMember	Enables explanation of syntax in different contexts from one source:
ARCQuery.QueryExpressionAggregate	ARCQuery	Class	Aggregates over the given key.
ARCCore.ClassAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.ParseResult	ARCCore	Class	NOTE: Concept is very old, from the dark ages of AgoRapide's very first inception. There might be room for improvement.
ARCQuery.QueryExpressionAggregate.Execute	ARCQuery	ClassMember	Transforms the given input collection into a resulting collection.
ARCCore.ClassAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.ParseResult.Result	ARCCore	ClassMember	Will be null if ErrorResponse is set.
ARCQuery.QueryExpressionAggregate.IsSuitableAggregator	ARCQuery	ClassMember	Returns true if
ARCCore.ClassMemberAttribute	ARCCore	Class	Describes a member of a class (a method).
ARCCore.ParseResult.ErrorResponse	ARCCore	ClassMember	Will be null if Result is set
ARCQuery.QueryExpressionAggregate.TryCheckForExistenceOfKey	ARCQuery	ClassMember	Used by query expressions in order to catch wrong field names used or misspelling of field names.
ARCCore.ClassMemberAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.PK	ARCCore	Class	PK = AgoRapide PropertyKey.
ARCQuery.QueryExpressionAggregate.SyntaxHelp	ARCQuery	ClassMember	1) 'AGGREGATE {rowKey}' like "AGGREGATE Product"
ARCCore.ClassMemberAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.PK.TryGetEnum	ARCCore	ClassMember	Note that usually you will not have to ask for this value, usually in AgoRapide it goes the other way around, you have the enum member / enum value and want the corresponding property key.
ARCQuery.QueryExpressionAggregate.AggregationType	ARCQuery	ClassMember	Most common value is -Count-, in which case -AggregationKey- may be correspondingly set to null.
ARCCore.ClassMemberAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.PK.TryGetV	ARCCore	ClassMember	Only type of PK, string or type of __enum is allowed to ask for (as TRequest generic type parameter).
ARCQuery.QueryExpressionAggregate.AggregationKey	ARCQuery	ClassMember	This is often null (with -AggregationType- correspondingly set to Count-).
ARCCore.EnumAttribute	ARCCore	Class	Describes an enum.
ARCCore.PK.GetA	ARCCore	ClassMember	Convenience method for easy access to -BasePKAttribute- with corresponding explaining exception if fails
ARCQuery.QueryExpressionAll	ARCQuery	Class	Represents all entities for a given collection.
ARCCore.EnumAttribute.GetAttribute	ARCCore	ClassMember	Throws exception if tagged as -PropertyKeyEnum- and name of type does not end with capital letter 'P' (like 'CustomerP' for enum describing class 'Customer' for instance).
ARCCore.PK.TryGetA	ARCCore	ClassMember	Convenience method for easy access to -BasePKAttribute-.
ARCQuery.QueryExpressionAll.Execute	ARCQuery	ClassMember	Transforms the given input collection into a resulting collection.
ARCCore.EnumAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.PK.ModifyCleanerAndValidatorAndParserForCardinality	ARCCore	ClassMember	Called from -Initialize- after _cleaner and _validatorAndParser have been set.
ARCQuery.QueryExpressionAll.TryCheckForExistenceOfKey	ARCQuery	ClassMember	Used by query expressions in order to catch wrong field names used or misspelling of field names.

Generated 2025-07-11 16:42:46.694 UTC