[ROOT] doc DocFrag SELECT Assembly, DocFragType, Description.FirstLine() < SKIP 40 > < TAKE 96 >

96 items

DocFragId	Assembly	DocFragType	Description.FirstLine()
ARCCore.IKString.op_Equality	ARCCore	ClassMember	It is quite natural in the code to write code like "if (a.CustomerId == b.CustomerId)", therefore the need to implement == and != operators here.
ARCCore.IKString	ARCCore	Class	Index key for any general id, like primary-key or sequence-number or similar.
ARCCore.ParseResult.Result	ARCCore	ClassMember	Will be null if ErrorResponse is set.
ARCCore.IKString.FromCache	ARCCore	ClassMember	Reduces number of objects generated by caching those known to be within a limited range
ARCCore.ParseResult.ErrorResponse	ARCCore	ClassMember	Will be null if Result is set
ARCCore.IKString.EnrichKey	ARCCore	ClassMember	'Implementing' -ITypeDescriber-.
ARCCore.PK	ARCCore	Class	PK = AgoRapide PropertyKey.
ARCCore.IKType	ARCCore	Class	Index key used when storing a collection of a given type, like 'Customer'.
ARCCore.PK.TryGetEnum	ARCCore	ClassMember	Note that usually you will not have to ask for this value, usually in AgoRapide it goes the other way around, you have the enum member / enum value and want the corresponding property key.
ARCCore.IKType.ToString	ARCCore	ClassMember	Caching is supposed to be useful because may be called quite often.
ARCCore.PK.TryGetV	ARCCore	ClassMember	Only type of PK, string or type of __enum is allowed to ask for (as TRequest generic type parameter).
ARCCore.ITypeDescriber	ARCCore	Class	Provides a standardized mechanism for describing single-property values (like 'PhoneNumber' of 'Customer' for instance).
ARCCore.PK.GetA	ARCCore	ClassMember	Convenience method for easy access to -BasePKAttribute- with corresponding explaining exception if fails
ARCCore.ITypeDescriber.GetSyntaxHelp	ARCCore	ClassMember	Enables explanation of syntax in different contexts from one source:
ARCCore.PK.TryGetA	ARCCore	ClassMember	Convenience method for easy access to -BasePKAttribute-.
ARCCore.ParseResult	ARCCore	Class	NOTE: Concept is very old, from the dark ages of AgoRapide's very first inception. There might be room for improvement.
ARCCore.PK.ModifyCleanerAndValidatorAndParserForCardinality	ARCCore	ClassMember	Called from -Initialize- after _cleaner and _validatorAndParser have been set.
ARCCore.PK.TryCleanValidateAndParse	ARCCore	ClassMember	Cleans and parses the value according to specifications for this property key.
ARCCore.PK.TryGetFromTypeAndFieldName Overload1	ARCCore	ClassMember	Returns property key based on type and field name.
ARCCore.PK.PackParseResultForStorageInEntityObject	ARCCore	ClassMember	Packs result of parsing into a -IP--derived class, suitable for sending to -AddOrUpdateP-.
ARCCore.PK.GetAllPKForEntityType	ARCCore	ClassMember	Returns all property keys relevant for the given entity type,
ARCCore.PK.PackObjectForStorageInEntityObject	ARCCore	ClassMember	See -PackParseResultForStorageInEntityObject- for documentation.
ARCCore.PK.GetAllPKForEntityTypeString	ARCCore	ClassMember	Returns all property keys relevant for the given entity type,
ARCCore.PK.FromEnum	ARCCore	ClassMember	Returns the corresponding -PK- instance from the given -PropertyKeyEnum-.
ARCCore.PK.BuildFromStringCache	ARCCore	ClassMember	Builds the content of -_fromStringCache- and also -_allPKForEntityTypeCache-.
ARCCore.PK.GetTypeMapping	ARCCore	ClassMember	Returns the relevant property key for a given type entity-type and field-type.
ARCCore.PK..ctor	ARCCore	ClassMember	Constructor with 'object _enum' is necessary in order for ToString to work.
ARCCore.PK.GetObligatoryValuesForEntityType	ARCCore	ClassMember	Returns all obligatory values (based on -IsObligatory-)
ARCCore.PK.Type	ARCCore	ClassMember	Returns type from -PKTypeAttribute-'s -Type-.
ARCCore.PK.Equals	ARCCore	ClassMember	Note that ToString is only based on __enum, meaning that two enum members / enum values with same name but different type, like CustomerP.Name and OrderP.Name, will be considered equal.
ARCCore.PK.Cardinality	ARCCore	ClassMember	Returns cardinality from -PKTypeAttribute-'s -Cardinality-.
ARCCore.PK.TryGetP	ARCCore	ClassMember	Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway.
ARCCore.PK.CorrespondingClass	ARCCore	ClassMember	Returns -CorrespondingClass- based on -__enum-.
ARCCore.PK.ValidatorAndParser	ARCCore	ClassMember	Validates and parses a value.
ARCCore.PKHTMLAttribute.Encode	ARCCore	ClassMember	Encodes the given string to HTML format through the static method implemented in class -Encoder-.
ARCCore.PK.Cleaner	ARCCore	ClassMember	Cleanup of values, to be used before value is attempted validated.
ARCCore.PKHTMLAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.PK.AllEnums	ARCCore	ClassMember	All enums for the whole application.
ARCCore.PKHTMLAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.PK.AllPKEnums	ARCCore	ClassMember	All -PropertyKeyEnum--tagged enums for the whole application.
ARCCore.PKHTMLAttribute.Encoder	ARCCore	ClassMember	See -Encoder-.
ARCCore.PKLogAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.PKRelAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.PKLogAttribute.DoNotLogAtAll	ARCCore	ClassMember	See -DoNotLogAtAll-.
ARCCore.PKRelAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.PKLogAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.PKRelAttribute.ForeignEntity	ARCCore	ClassMember	See -ForeignEntity-.
ARCCore.PKRelAttribute	ARCCore	Class	Describes relationships between entities (between tables in RDBMS terms).
ARCCore.PKRelAttribute.OppositeTerm	ARCCore	ClassMember	See -OppositeTerm-.
ARCCore.IP	ARCCore	Class	IP = IProperty.
ARCCore.PKTypeAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.IP.TryGetV Overload2	ARCCore	ClassMember	The actual value of the property. Mostly relevant for single-value properties like -PValue-.
ARCCore.PKTypeAttribute.Type	ARCCore	ClassMember	See -Type-.
ARCCore.IP.Inc	ARCCore	ClassMember	Increments given property key by 1. Sets to 1 if not found. Uses long, not integer.
ARCCore.PKTypeAttribute.Cardinality	ARCCore	ClassMember	See -Cardinality-.
ARCCore.IP.Dec	ARCCore	ClassMember	Decrements given property key by 1. Sets to -1 if not found. Uses long, not integer.
ARCCore.PKTypeAttribute.DefaultValue	ARCCore	ClassMember	See -DefaultValue-.
ARCCore.IP.TrySetPP	ARCCore	ClassMember	SetPP = set property of property. Sets property of entity contained within this class.
ARCCore.IP.HandleException	ARCCore	ClassMember	Note that most relevant to use for -PConcurrent-.
ARCCore.IP.GetKeysEqualToValue	ARCCore	ClassMember	Returns properties which themselves again have key and value equal to the given key and value.
ARCCore.IP.TryParseDtr	ARCCore	ClassMember	Parses a PropertyStreamLine- beginning with -dtr-.
ARCCore.IP.OnTrySetP	ARCCore	ClassMember	Event handler to be called by -TrySetP- before it changes a property value (but AFTER it has done any validity checks, that is, after it has 'decided' to return TRUE, in other words, event handler should be called when change is guaranteed to go through, but before it actually has been done).
ARCCore.IP.Initialize	ARCCore	ClassMember	Note that has a default implementation (doing nothing).
ARCCore.IP.TryGetP	ARCCore	ClassMember	Gets a single property for this object
ARCCore.IP.AssertIntegrity	ARCCore	ClassMember	See -TryAssertIntegrity-.
ARCCore.IP.Values	ARCCore	ClassMember	Returns all the values (all the properties) for this instance.
ARCCore.IP.ToPropertyStream	ARCCore	ClassMember	Turns object into a -PropertyStream-
ARCCore.IP.Logger	ARCCore	ClassMember	Describes a logger.
ARCCore.IP.ToJSONSerializeable	ARCCore	ClassMember	Prepares the data into a format acceptable for System.Text.Json.JsonSerializer.Serialize.
ARCCore.IP.AllIPDerivedTypes	ARCCore	ClassMember	All relevant -IP--derived types for the whole application.
ARCCore.IP.GetValueForJSONSerializer	ARCCore	ClassMember	Practical approach to serializing of -IP- based values to JSON.
ARCCore.IP.AllIPDerivedTypesWithPKEnum	ARCCore	ClassMember	All relevant -IP--derived types for the whole application for which the also is defined a -PropertyKeyEnum-.
ARCCore.IP.TrySetP	ARCCore	ClassMember	Set property regardless of whether exists or not.
ARCCore.IP.AllIPDerivedTypesDictIKType	ARCCore	ClassMember	Same as -AllIPDerivedTypesDict- except that value is -IKType-, not string.
ARCCore.IP.AddPV Overload2	ARCCore	ClassMember	NOTE: The different AddPV / AddP overloads should only be used if you want an assertion against the
ARCCore.P	ARCCore	Class	'Dummy'-class, not necessarily in use. See -PP- for more information. Created because of the concept of CorrespondingClass which is strictly enforced
ARCCore.IP.AddPV Overload1	ARCCore	ClassMember	Adds a property value (as a -PValue-) for this objectThrows -KeyAlreadyExistsException- when relevant.
ARCCore.P.TryGetP	ARCCore	ClassMember	Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway.
ARCCore.IP.AddP	ARCCore	ClassMember	Adds a property for this object.
ARCCore.P.TryGetV	ARCCore	ClassMember	Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.IP.AddOrUpdateP	ARCCore	ClassMember	Duplicates functionality of SetP.
ARCCore.P.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.IP.GetOrAddPV	ARCCore	ClassMember	Gets value. If not set then value will be added
ARCCore.ICreated	ARCCore	Class	A dummy interface signifying that implementing class has the ability to store (in-memory) metadata -Created-
ARCCore.IP.GetPV	ARCCore	ClassMember	Gets a single property's value for this object. Returns default value if not successful.
ARCCore.PCollection	ARCCore	Class	A class useful for storing a collection of entities (a table in RDBMS-terms) because it implements -Indexing-.
ARCCore.IP.TryGetPV	ARCCore	ClassMember	Gets a single property's value for the given property key.
ARCCore.PCollection.TrySetPP	ARCCore	ClassMember	Replaces default interface method -TrySetPP-.
ARCCore.IP.IsValid	ARCCore	ClassMember	Note that by default all properties are 'valid' but because of -NoRealDeletion-, we must have a mechanism for invalidating properties. This property returns FALSE if property has been invalidated and timestamp for invalidation is not '0001-01-01'.
ARCCore.BaseAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.BasePKAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.ClassAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.ClassAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.EnumAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.EnumAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.CardinalityExtensions	ARCCore	Class

Generated 2026-07-02 21:40:03.223 UTC