[ROOT] doc DocFrag SELECT Assembly, DocFragType, Description.FirstLine() < SKIP 52 > < TAKE 240 >
240 items
| DocFragId | Assembly | DocFragType | Description.FirstLine() |
|---|---|---|---|
| ARCCore.IKCoded | ARCCore | Class | Understands coded and unencoded variants of -IK-. |
| ARCCore.IKCoded.EnrichKey | ARCCore | ClassMember | 'Implementing' -ITypeDescriber-. |
| ARCCore.IKCoded.TryCheckValidEncodedValue | ARCCore | ClassMember | Checks if encoded value is valid. |
| ARCCore.IKCoded.FromCacheEncoded | ARCCore | ClassMember | Reduces number of objects generated by caching those known to be within a limited range |
| ARCCore.IKCoded.FromCacheUnencoded | ARCCore | ClassMember | Reduces number of objects generated by caching those known to be within a limited range |
| ARCCore.IKCoded.FromEncoded | ARCCore | ClassMember | Note how uses instance cache if already exists there. |
| ARCCore.IKCoded.TryEncode | ARCCore | ClassMember | Returns a string containing only characters in -AllowedEncodedCharacters-. |
| ARCCore.IKCoded.ToString | ARCCore | ClassMember | Returns -Encoded-'s string representation. |
| ARCCore.IKCoded.Encoded | ARCCore | ClassMember | This string value can be used directly in folder names, file names and HTTP URL's without any further encoding being necessary. |
| ARCCore.IKCoded.AllowedEncodedCharacters | ARCCore | ClassMember | The character set 'A...Za...z0...9-_().,='. |
| ARCCore.IKDate | ARCCore | Class | A more memory efficient alternative to -IKString- (together with -IKLong-). |
| ARCCore.IKDate.op_Equality | ARCCore | ClassMember | It is quite natural in the code to write code like "if (a.CustomerId == b.CustomerId)", therefore the need to implement == and != operators here. |
| ARCCore.IKDate.EnrichKey | ARCCore | ClassMember | 'Implementing' -ITypeDescriber-. |
| ARCCore.IKDate.ValidDateTimeFormats | ARCCore | ClassMember | Note: Be very careful about expanding this array. ToString must be considered, and also how Equals should work with other sub classes of IK. |
| ARCCore.IKLong | ARCCore | Class | A more memory efficient alternative to -IKString-. |
| ARCCore.IKLong.op_Equality | ARCCore | ClassMember | It is quite natural in the code to write code like "if (a.CustomerId == b.CustomerId)", therefore the need to implement == and != operators here. |
| ARCCore.IKLong.EnrichKey | ARCCore | ClassMember | 'Implementing' -ITypeDescriber-. |
| ARCCore.IKString | ARCCore | Class | Index key for any general id, like primary-key or sequence-number or similar. |
| ARCCore.IKString.FromCache | ARCCore | ClassMember | Reduces number of objects generated by caching those known to be within a limited range |
| ARCCore.IKString.FromString | ARCCore | ClassMember | Note how uses instance cache if already exists there |
| ARCCore.IKString.op_Equality | ARCCore | ClassMember | It is quite natural in the code to write code like "if (a.CustomerId == b.CustomerId)", therefore the need to implement == and != operators here. |
| ARCCore.IKString.EnrichKey | ARCCore | ClassMember | 'Implementing' -ITypeDescriber-. |
| ARCCore.IKType | ARCCore | Class | Index key used when storing a collection of a given type, like 'Customer'. |
| ARCCore.IKType.ToString | ARCCore | ClassMember | Caching is supposed to be useful because may be called quite often. |
| ARCCore.ITypeDescriber | ARCCore | Class | Provides a standardized mechanism for describing single-property values (like 'PhoneNumber' of 'Customer' for instance). |
| ARCCore.ITypeDescriber.GetSyntaxHelp | ARCCore | ClassMember | Enables explanation of syntax in different contexts from one source: |
| ARCCore.ParseResult | ARCCore | Class | NOTE: Concept is very old, from the dark ages of AgoRapide's very first inception. There might be room for improvement. |
| ARCCore.ParseResult.Result | ARCCore | ClassMember | Will be null if ErrorResponse is set. |
| ARCCore.ParseResult.ErrorResponse | ARCCore | ClassMember | Will be null if Result is set |
| ARCCore.PK | ARCCore | Class | PK = AgoRapide PropertyKey. |
| ARCCore.PK.TryGetEnum | ARCCore | ClassMember | Note that usually you will not have to ask for this value, usually in AgoRapide it goes the other way around, you have the enum member / enum value and want the corresponding property key. |
| ARCCore.PK.TryGetV | ARCCore | ClassMember | Only type of PK, string or type of __enum is allowed to ask for (as TRequest generic type parameter). |
| ARCCore.PK.GetA | ARCCore | ClassMember | Convenience method for easy access to -BasePKAttribute- with corresponding explaining exception if fails |
| ARCCore.PK.TryGetA | ARCCore | ClassMember | Convenience method for easy access to -BasePKAttribute-. |
| ARCCore.PK.ModifyCleanerAndValidatorAndParserForCardinality | ARCCore | ClassMember | Called from -Initialize- after _cleaner and _validatorAndParser have been set. |
| ARCCore.PK.ToString | ARCCore | ClassMember | Caching is supposed to be useful because may be called quite often. |
| ARCCore.PK.TryValidateAndParse | ARCCore | ClassMember | Parses the value according to specifications for this property key. |
| ARCCore.PK.TryCleanValidateAndParse | ARCCore | ClassMember | Cleans and parses the value according to specifications for this property key. |
| ARCCore.PK.PackParseResultForStorageInEntityObject | ARCCore | ClassMember | Packs result of parsing into a -IP--derived class, suitable for sending to -AddOrUpdateP-. |
| ARCCore.PK.PackObjectForStorageInEntityObject | ARCCore | ClassMember | See -PackParseResultForStorageInEntityObject- for documentation. |
| ARCCore.PK.FromEnum | ARCCore | ClassMember | Returns the corresponding -PK- instance from the given -PropertyKeyEnum-. |
| ARCCore.PK.TryGetFromTypeAndFieldName Overload3 | ARCCore | ClassMember | Returns property key based on type and field name. |
| ARCCore.PK.TryGetFromTypeAndFieldName Overload2 | ARCCore | ClassMember | Returns property key based on type and field name. |
| ARCCore.PK.TryGetFromTypeAndFieldName Overload1 | ARCCore | ClassMember | Returns property key based on type and field name. |
| ARCCore.PK.GetAllPKForEntityType | ARCCore | ClassMember | Returns all property keys relevant for the given entity type, |
| ARCCore.PK.GetAllPKForEntityTypeString | ARCCore | ClassMember | Returns all property keys relevant for the given entity type, |
| ARCCore.PK.BuildFromStringCache | ARCCore | ClassMember | Builds the content of -_fromStringCache- and also -_allPKForEntityTypeCache-. |
| ARCCore.PK.GetTypeMapping | ARCCore | ClassMember | Returns the relevant property key for a given type entity-type and field-type. |
| ARCCore.PK.GetObligatoryValuesForEntityType | ARCCore | ClassMember | Returns all obligatory values (based on -IsObligatory-) |
| ARCCore.PK.Equals | ARCCore | ClassMember | Note that ToString is only based on __enum, meaning that two enum members / enum values with same name but different type, like CustomerP.Name and OrderP.Name, will be considered equal. |
| ARCCore.PK.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCCore.PK..ctor | ARCCore | ClassMember | Constructor with 'object _enum' is necessary in order for ToString to work. |
| ARCCore.PK.Type | ARCCore | ClassMember | Returns type from -PKTypeAttribute-'s -Type-. |
| ARCCore.PK.Cardinality | ARCCore | ClassMember | Returns cardinality from -PKTypeAttribute-'s -Cardinality-. |
| ARCCore.PK.CorrespondingClass | ARCCore | ClassMember | Returns -CorrespondingClass- based on -__enum-. |
| ARCCore.PK.ValidatorAndParser | ARCCore | ClassMember | Validates and parses a value. |
| ARCCore.PK.Cleaner | ARCCore | ClassMember | Cleanup of values, to be used before value is attempted validated. |
| ARCCore.PK.AllEnums | ARCCore | ClassMember | All enums for the whole application. |
| ARCCore.PK.AllPKEnums | ARCCore | ClassMember | All -PropertyKeyEnum--tagged enums for the whole application. |
| ARCCore.PK.__enum | ARCCore | ClassMember | This information is also found as EnumMember. |
| ARCCore.PKHTMLAttribute | ARCCore | Class | Contains pointer to HTML encoder for a property. |
| ARCCore.PKHTMLAttribute.Encode | ARCCore | ClassMember | Encodes the given string to HTML format through the static method implemented in class -Encoder-. |
| ARCCore.PKHTMLAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.PKHTMLAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.PKHTMLAttribute.Encoder | ARCCore | ClassMember | See -Encoder-. |
| ARCCore.PKHTMLAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.IHTMLEncoder | ARCCore | Class | Pseudo-interface signifying that implementing class has a static metod called 'Encode' for encoding a string to HTML. |
| ARCCore.PKLogAttribute | ARCCore | Class | Explains how logging of changes to a property should be done. |
| ARCCore.PKLogAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.PKLogAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.PKLogAttribute.DoNotLogAtAll | ARCCore | ClassMember | See -DoNotLogAtAll-. |
| ARCCore.PKLogAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.PKRelAttribute | ARCCore | Class | Describes relationships between entities (between tables in RDBMS terms). |
| ARCCore.PKRelAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.PKRelAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.PKRelAttribute.ForeignEntity | ARCCore | ClassMember | See -ForeignEntity-. |
| ARCCore.PKRelAttribute.OppositeTerm | ARCCore | ClassMember | See -OppositeTerm-. |
| ARCCore.ActualConnectionP.ClientUpdatePosition | ARCCore | EnumMember | Note how this is stored both as -ClientUpdatePosition- (on the client side) and -ClientUpdatePosition- (on the server side). |
| ARCCore.PKRelAttribute.EnforceReferentialIntegrity | ARCCore | ClassMember | See -EnforceReferentialIntegrity-. |
| ARCCore.IP.TrySetPP | ARCCore | ClassMember | SetPP = set property of property. Sets property of entity contained within this class. |
| ARCCore.PRich.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCCore.ActualConnectionP.SubscriptionAsRequestedByClient | ARCCore | EnumMember | Originates from -Subscription-. |
| ARCCore.PKRelAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.IP.GetKeysEqualToValue | ARCCore | ClassMember | Returns properties which themselves again have key and value equal to the given key and value. |
| ARCCore.PRich.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.ActualConnectionP.ClosingReason | ARCCore | EnumMember | Reason why this connection was closed |
| ARCCore.PKTypeAttribute | ARCCore | Class | Contains the most basic essential information about a property key, like its description, -Type-, -Cardinality-, -IsObligatory- and -DefaultValue-. |
| ARCCore.IP.OnTrySetP | ARCCore | ClassMember | Event handler to be called by -TrySetP- before it changes a property value (but AFTER it has done any validity checks, that is, after it has 'decided' to return TRUE, in other words, event handler should be called when change is guaranteed to go through, but before it actually has been done). |
| ARCCore.PRich.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.ActualConnectionP.IsErrorCondition | ARCCore | EnumMember | Some kind of error condition has occured regarding data going back and forth, but the TCP/IP connection itself is probably sound. |
| ARCCore.PKTypeAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.IP.TryGetP | ARCCore | ClassMember | Gets a single property for this object |
| ARCCore.PValue<T>.ToString | ARCCore | ClassMember | Do no cache this value, because memory consumption would then increase significantly in your applicationj |
| ARCCore.ActualConnectionP.ErrorConditionData | ARCCore | EnumMember | Detailed explanation about -IsErrorCondition- |
| ARCCore.PKTypeAttribute.StandardValidatorAndParser | ARCCore | ClassMember | Returns validator and parser for well known types like string, int, long, bool, DateTime, TimeSpan, Type, Uri. |
| ARCCore.IP.ToPropertyStream | ARCCore | ClassMember | Turns object into a -PropertyStream- |
| ARCCore.PValue<T>.DeepCopy | ARCCore | ClassMember | Note that if the generic type (T) is not immutable, then what we return will not be a truly deep copy. |
| ARCCore.ActualConnectionP.UnderClosure | ARCCore | EnumMember | Set to TRUE if to be closed and reinitialized. |
| ARCCore.PKTypeAttribute.StandardCleaner | ARCCore | ClassMember | Returns a cleaner for well known types like bool |
| ARCCore.IP.ToJSONSerializeable | ARCCore | ClassMember | Prepares the data into a format acceptable for System.Text.Json.JsonSerializer.Serialize. |
| ARCCore.PValue<T>..ctor | ARCCore | ClassMember | Note how this class does not have a parameter-less constructor (unlike all other -IP--derived classes in AgoRapide) |
| ARCCore.ActualConnectionP.MonkeyWrench | ARCCore | EnumMember | |
| ARCCore.PKTypeAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.IP.GetValueForJSONSerializer | ARCCore | ClassMember | Practical approach to serializing of -IP- based values to JSON. |
| ARCCore.ActualConnection.SetMyUpdatePositionGenerator | ARCCore | ClassMember | Set by -StreamProcessor-. |
| ARCCore.ActualConnectionP.PartnerIPAddress | ARCCore | EnumMember | TODO: Use more strongly typing for this. |
| ARCCore.PKTypeAttribute.Type | ARCCore | ClassMember | See -Type-. |
| ARCCore.IP.TrySetP | ARCCore | ClassMember | Set property regardless of whether exists or not. |
| ARCCore.ActualConnection.SetSinglePropertyStreamReceiver | ARCCore | ClassMember | Set by -StreamProcessor-. |
| ARCCore.ConnectionInstructionP | ARCCore | Enum | Describes class -ConnectionInstruction-. |
| ARCCore.PKTypeAttribute.Cardinality | ARCCore | ClassMember | See -Cardinality-. |
| ARCCore.IP.TryGetV Overload1 | ARCCore | ClassMember | The actual 'unpacking' of the object. |
| ARCCore.ActualConnection.SetUpToDatePositionGenerator | ARCCore | ClassMember | Set by -StreamProcessor-. Not used by -Client-. |
| ARCCore.ConnectionInstructionP.ClientId | ARCCore | EnumMember | The AgoRapide node-id for which this connection is relevant. Used for distributing over the -PropertyStream- information to the clients about which possible nodes they can connect to. |
| ARCCore.PKTypeAttribute.DefaultValue | ARCCore | ClassMember | See -DefaultValue-. |
| ARCCore.IP.DeepCopy | ARCCore | ClassMember | Creates a deep copy of this object instance, that is, a copy with all new object instances (except for immutable objects). |
| ARCCore.ActualConnection.InitializeOutgoingConnection | ARCCore | ClassMember | Relevant for -Outgoing-. |
| ARCCore.ConnectionInstructionP.ServerHostName | ARCCore | EnumMember | The host (DNS or IP-address) for which to connect. |
| ARCCore.PKTypeAttribute.IsObligatory | ARCCore | ClassMember | See -IsObligatory-. |
| ARCCore.IP.AllIPDerivedTypesInludingGenericAndAbstract | ARCCore | ClassMember | All relevant -IP--derived types (except the interface -IP- itself) known to the application. |
| ARCCore.ActualConnection..ctor | ARCCore | ClassMember | Note parameter-less constructor as desired for all classes inheriting -IP-. |
| ARCCore.ConnectionInstructionP.ServerPortNo | ARCCore | EnumMember | The port number for which to connect. |
| ARCCore.PKTypeAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.IP.AllIPDerivedTypesDict | ARCCore | ClassMember | Provides lookup of a type in -AllIPDerivedTypes- given its string representation. |
| ARCCore.MonkeyWrench | ARCCore | Class | Describes level of 'spanner-throwing' this connection shall contibute with |
| ARCCore.ConnectionInstructionP.ConnectionId | ARCCore | EnumMember | Usually a combination of -ClientId-, -ServerHostName- and -ServerPortNo-. |
| ARCCore.IP | ARCCore | Class | IP = IProperty. |
| ARCCore.IP.AllIPDerivedTypesDictIKType | ARCCore | ClassMember | Same as -AllIPDerivedTypesDict- except that value is -IKType-, not string. |
| ARCCore.ClientUpdatePosition | ARCCore | Class | Describes from WHERE (from WHEN) in the historic -PropertyStream- new data is to be returned. |
| ARCCore.ConnectionInstructionP.DataTransferDirection | ARCCore | EnumMember | |
| ARCCore.IP.TryGetV Overload2 | ARCCore | ClassMember | The actual value of the property. Mostly relevant for single-value properties like -PValue-. |
| ARCCore.P | ARCCore | Class | 'Dummy'-class, not necessarily in use. See -PP- for more information. Created because of the concept of CorrespondingClass which is strictly enforced |
| ARCCore.ClientUpdatePosition.Filename | ARCCore | ClassMember | Filename like '2020-04-03 08:42:22_R001' |
| ARCCore.ConnectionInstructionP.Subscription | ARCCore | EnumMember | The actual subscripton. This is what the connecting party / (downstream) client would send over its TCP/IP connection to the (upstream) server. |
| ARCCore.IP.Inc | ARCCore | ClassMember | Increments given property key by 1. Sets to 1 if not found. Uses long, not integer. |
| ARCCore.P.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCCore.ClientUpdatePosition.IsAtEndOfStream | ARCCore | ClassMember | Necessary in order to implement -AdHocQuery-. |
| ARCCore.ConnectionInstructionP.MultipleConnectionUsage | ARCCore | EnumMember | |
| ARCCore.IP.Dec | ARCCore | ClassMember | Decrements given property key by 1. Sets to -1 if not found. Uses long, not integer. |
| ARCCore.P.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.ClientUpdatePosition.ClientDatastoreIsEmptyInstance | ARCCore | ClassMember | See also -ClientDatastoreIsEmpty. |
| ARCCore.ConnectionInstructionP.Sharding | ARCCore | EnumMember | |
| ARCCore.IP.Log | ARCCore | ClassMember | The 'final' overload of -Log- that is called by the other overloads. |
| ARCCore.P.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.ClientUpdatePosition.OnlyNewDataIsRequestedInstance | ARCCore | ClassMember | See also -OnlyNewDataIsRequested. |
| ARCCore.MultipleConnectionUsage | ARCCore | Enum | Enables fault-tolerance by describing use of multiple connections |
| ARCCore.IP.LogExecuteTime | ARCCore | ClassMember | Times the execution of the given function and logs details about elapsed time. |
| ARCCore.ICreated | ARCCore | Class | A dummy interface signifying that implementing class has the ability to store (in-memory) metadata -Created- |
| ARCCore.ConnectionInstruction | ARCCore | Class | The instruction about what connections to make (host, portnr, data transfer direction and so on). |
| ARCCore.MultipleConnectionUsage.Admin | ARCCore | EnumMember | Connection is a special administrative connection to a central 'command-and-control' server which instructs which connections to make. |
| ARCCore.IP.HandleException | ARCCore | ClassMember | Note that most relevant to use for -PConcurrent-. |
| ARCCore.PCollection | ARCCore | Class | A class useful for storing a collection of entities (a table in RDBMS-terms) because it implements -Indexing-. |
| ARCCore.ConnectionInstruction.Initialize | ARCCore | ClassMember | Initializes to sane values. |
| ARCCore.MultipleConnectionUsage.RoundRobin | ARCCore | EnumMember | This connection to be used in a turn based system, together with other connections with -RoundRobin-. |
| ARCCore.IP.TryParseDtr | ARCCore | ClassMember | Parses a PropertyStreamLine- beginning with -dtr-. |
| ARCCore.PCollection.TrySetPP | ARCCore | ClassMember | Replaces default interface method -TrySetPP-. |
| ARCCore.ConnectionInstruction.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCCore.MultipleConnectionUsage.Simultaneous | ARCCore | EnumMember | This connection to be used simultaneously with other connections with -Simultaneous- |
| ARCCore.IP.Initialize | ARCCore | ClassMember | Note that has a default implementation (doing nothing). |
| ARCCore.PCollection.GetKeysEqualToValue | ARCCore | ClassMember | Returns properties which themselves again have key and value equal to the given key and value. |
| ARCCore.PropertyStreamLine.EncodeKeys | ARCCore | ClassMember | Encodes the key part of a -PropertyStreamLine-. |
| ARCCore.StreamProcessorP | ARCCore | Enum | Describes class -StreamProcessor-. |
| ARCCore.IP.AssertIntegrity | ARCCore | ClassMember | See -TryAssertIntegrity-. |
| ARCCore.PCollection.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCCore.PropertyStreamLine.EncodeValues | ARCCore | ClassMember | Typically used when turning -WholeCollection- into a value part of a -PropertyStreamLine-. |
| ARCCore.StreamProcessorP.LocalStorageFolder | ARCCore | EnumMember | The local path to which new properties are stored. Should NOT end with any trailing DirectorySeparatorChar |
| ARCCore.IP.TryAssertIntegrity | ARCCore | ClassMember | Asserts the integrity of this entity. |
| ARCCore.PCollection.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.PropertyStreamLine.EncodeKeyPart | ARCCore | ClassMember | Converts a single key part of a -PropertyStreamLine- to a format suitable for sending over a -PropertyStream-. |
| ARCCore.StreamProcessorP.IndividualStorageFileSize | ARCCore | EnumMember | Max size (in bytes) for a single storage file before a new file is created by call to -StreamProcessor.CreateNewStorageFile-. |
| ARCCore.IP.ToString | ARCCore | ClassMember | The ToString()-implementation in the classes implementing this interface is supposed to give a short concise representation of the object for debugging and logging purposes, that is, intended for human consumption. The most 'important' implementation is probably the one in -PRich- (-ToString-) because that one is often the basis for your entity classes like 'Customer', 'Order' and so on |
| ARCCore.PCollection.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.PropertyStreamLine.EncodeValuePart | ARCCore | ClassMember | Converts a single value part of a -PropertyStreamLine- to a format suitable for sending over a -PropertyStream-. |
| ARCCore.StreamProcessorP.CurrentlyInitializing | ARCCore | EnumMember | Set to TRUE at initialization (signals for instance -ReceiveAndDistribute- that it can only queue messages, not process them). |
| ARCCore.IP.AddPV Overload2 | ARCCore | ClassMember | NOTE: The different AddPV / AddP overloads should only be used if you want an assertion against the |
| ARCCore.IIKII.PackParseResultForStorageInIKII | ARCCore | ClassMember | This method corresponds to -PackParseResultForStorageInEntityObject-. |
| ARCCore.PropertyStreamLine.ParseAndStoreFailSafe | ARCCore | ClassMember | If either parsing or storing fails then this method will call -StoreFailure- in order to keep some track of why parsing or storing failed. |
| ARCCore.StreamProcessorP.ClientUpdatePositionPath | ARCCore | EnumMember | Complete path to file containing -ClientUpdatePosition-. |
| ARCCore.IP.AddPV Overload1 | ARCCore | ClassMember | Adds a property value (as a -PValue-) for this objectThrows -KeyAlreadyExistsException- when relevant. |
| ARCCore.IIKII.PackObjectForStorageInIKII | ARCCore | ClassMember | This method corresponds to -PackObjectForStorageInEntityObject-. |
| ARCCore.PropertyStreamLine.StoreFailSafe | ARCCore | ClassMember | Stores if possible and fails silently. |
| ARCCore.StreamProcessorP.ClientUpdatePosition | ARCCore | EnumMember | Note how this is stored both as -ClientUpdatePosition- (on the client side) and -ClientUpdatePosition- (on the server side). |
| ARCCore.IP.AddP | ARCCore | ClassMember | Adds a property for this object. |
| ARCCore.PReadOnly | ARCCore | Class | Experimental (from Feb 2022) class suitable for classes that do not need to be deserialized, or to accept write requests through -PropertyAccess-. |
| ARCCore.PropertyStreamLine.StoreFailure | ARCCore | ClassMember | Stores a 'ParseOrStoreFailure'-object. |
| ARCCore.StreamProcessorP.IncomingConnectionsPortNo | ARCCore | EnumMember | If not set, then class will not listen for incoming connections (meaning that our application is probably a -Client-). |
| ARCCore.IP.AddOrUpdateP | ARCCore | ClassMember | Duplicates functionality of SetP. |
| ARCCore.PRich | ARCCore | Class | Fully flexible storage. Can store anything. Typical inherited for entity representations like 'Customer' or 'Order'. |
| ARCCore.PropertyStreamLine.TryStore | ARCCore | ClassMember | Stores the given -PropertyStreamLineParsed- in the given storage object. |
| ARCCore.StorageFileP.Hash | ARCCore | EnumMember | Hash of storage file. Not implemented as of Apr 2020. It is envisaged to store hash-value as last line in storage file. In this case the hash must be the hash of the file excluding the last line |
| ARCCore.IP.GetOrAddPV | ARCCore | ClassMember | Gets value. If not set then value will be added |
| ARCCore.PValue<T> | ARCCore | Class | Single value storage. |
| ARCCore.PropertyStreamLineParsed.TryParse | ARCCore | ClassMember | Generate list of <(IK key, Type valueType)> together with value from value part. |
| ARCCore.ConnectionDirection | ARCCore | Enum | The concept of who took the initiative for the connections (who asked to open the TCP/IP session). |
| ARCCore.IP.GetPV | ARCCore | ClassMember | Gets a single property's value for this object. Returns default value if not successful. |
| ARCCore.PValue<T>.TrySetP | ARCCore | ClassMember | NOTE: -TryStore- is explicit aware that -PValue- and -PValueEmpty- |
| ARCCore.PropertyStreamLineParsed.IsComment | ARCCore | ClassMember | Signifies that property stream line given for parsing started with '//' (two forward slashes). |
| ARCCore.ConnectionDirection.Incoming | ARCCore | EnumMember | ConnectionInstruction will not be set for these. |
| ARCCore.IP.TryGetPV | ARCCore | ClassMember | Gets a single property's value for the given property key. |
| ARCCore.PValue<T>.TryGetV | ARCCore | ClassMember | Supports duck typing. |
| ARCCore.PropertyStreamLineParsed.Keys | ARCCore | ClassMember | The keys part of the -PropertyStreamLine-, that is, everything before ' = '. |
| ARCCore.ConnectionDirection.Outgoing | ARCCore | EnumMember | There would normally exist two live outgoing connection at a given point in time for -Client- / -ArmDB-: |
| ARCCore.IP.IsValid | ARCCore | ClassMember | Note that by default all properties are 'valid' but because of -NoRealDeletion-, we must have a mechanism for invalidating properties. This property returns FALSE if property has been invalidated and timestamp for invalidation is not '0001-01-01'. |
| ARCCore.PValue<T>.ConvertObjectToString | ARCCore | ClassMember | Converts object to string. |
| ARCCore.PropertyStreamLineParsed.Value | ARCCore | ClassMember | The original (non-parsed, non-validated)) value part of the -PropertyStreamLine-, that is, everything after ' = '. |
| ARCCore.DataTransferDirection | ARCCore | Enum | Direction for transfer of data. |
| ARCCore.IP.Item | ARCCore | ClassMember | Offers string-based direct indexing. |
| ARCCore.PValueEmpty | ARCCore | Class | Represents the 'no value'. |
| ARCCore.StreamProcessor.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.DataTransferDirection.Send | ARCCore | EnumMember | Like -Client- sending in-application generated properties to -ArmDB- / -CoreDB- or -ArmDB- sending data received over an incoming connection to -CoreDB-. |
| ARCCore.IP.Keys | ARCCore | ClassMember | Returns all the keys for this instance. |
| ARCCore.PValueEmpty.TrySetP | ARCCore | ClassMember | NOTE: -TryStore- is explicit aware that -PValue- and -PValueEmpty- |
| ARCCore.StreamProcessor.OutsideLocalReceiver | ARCCore | ClassMember | The outside (in the sense outside of this class) local mechanism which receives all -PropertyStreamLine- registered by this class. |
| ARCCore.DataTransferDirection.Receive | ARCCore | EnumMember | Like -Client- receiving data from an upstream -ArmDB- / -CoreDB- or -ArmDB- receiving data from an upstream -CoreDB-. |
| ARCCore.IP.Values | ARCCore | ClassMember | Returns all the values (all the properties) for this instance. |
| ARCCore.PValueEmpty.ToPropertyStream | ARCCore | ClassMember | Typicall return value could be something like |
| ARCCore.PropertyStreamLineWithOrigin | ARCCore | Class | The rationale for this class is that -ReceiveAndDistribute- needs to distingush origin of data when routing it (in general, in order to avoid sending it back to its source). |
| ARCCore.TPropertyKeyEnum | ARCCore | Enum | Placeholder for any enum type suitable as generic type parameter for -PExact-. |
| ARCCore.IP.Logger | ARCCore | ClassMember | Describes a logger. |
| ARCCore.ActualConnection | ARCCore | Class | The actual connection, its internal state, queue for sending and so on. |
| ARCCore.PropertyStreamLineWithOrigin.HasLocalOrigin | ARCCore | ClassMember | Locally generated data is not to be sent to -OutsideLocalReceiver-). We instead leave it to the 'outside' to decide if |
| Assembly ARCDoc | Assembly | A library supporting documentation and demonstrating usage of AgoRapide. | |
| ARCCore.IP.AllIPDerivedTypes | ARCCore | ClassMember | All relevant -IP--derived types for the whole application. |
| ARCCore.ActualConnection.Communicate | ARCCore | ClassMember | Common for both -Incoming- and -Outgoing-. |
| ARCCore.PropertyStreamLineWithOrigin.SendToLocalReceiver | ARCCore | ClassMember | Means 'send to local receiver regardless of origin'. |
| ARCDoc.Apple | ARCDoc | Class | The most 'standard' way of implementing an entity-class in AgoRapide, by just inheriting -PRich-. |
| ARCCore.IP.AllIPDerivedTypesWithPKEnum | ARCCore | ClassMember | All relevant -IP--derived types for the whole application for which the also is defined a -PropertyKeyEnum-. |
| ARCCore.ActualConnection.LogAndSendErrorConditionData | ARCCore | ClassMember | Called when a serious error condition has been discovered and connection should be terminated. |
| ARCCore.PropertyStreamLineWithOrigin.DoNotAddTimestamp | ARCCore | ClassMember | Normally -StreamProcessor- inserts the required -Timestamp-s in the AgoRapide storage. |
| ARCDoc.Apple.AddName | ARCDoc | ClassMember | Convenience method, not obligatory. |
| ARCCore.IP.AllIPDerivedTypesWithPKEnumApplicationSpecific | ARCCore | ClassMember | All relevant -IP--derived types for the -ApplicationSpecificCode- part of the application for which also is defined a -PropertyKeyEnum-. |
| ARCCore.ActualConnection.Send | ARCCore | ClassMember | Sends all messages in queue. |
| ARCCore.PropertyStreamLineWithOrigin.ReceivedFromOutgoing | ARCCore | ClassMember | Data received from an outgoing connection, that is, data received based on 'this' application's subscription request (as subscribing client). |
| ARCDoc.Apple.GetName | ARCDoc | ClassMember | Convenience method, not obligatory. |
| ARCCore.IP.AllIPDerivedEntityCollectionClassesDict | ARCCore | ClassMember | All -IP--derived types for which is found a corresponding class with name like '{EntityType}Collection' |
| ARCCore.ActualConnection.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.StorageFile | ARCCore | Class | Implemented only in order to store some ideas about -Hash-. |
| ARCDoc.Demonstrator.DemonstrateLogConsole | ARCDoc | ClassMember | Demonstrates a quite simple log console. |
| ARCCore.IGetKeysEqualToValue | ARCCore | Class | Interface stating that implementing class does not use the default implementation of -GetKeysEqualToValue- (which does not use -Indexing-) but has replaced it with a more efficient implementation assumed to utilize -Indexing-. |
| ARCCore.ClientUpdatePosition.Index | ARCCore | ClassMember | Index (zero-based) into file. Value of -1 means blank update status / no data received at all (or no data received for this specific filename) |
Generated 2025-12-20 16:46:34.526 UTC